- 10 Jul, 2014 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpuLinus Torvalds authored
Pull percpu fix from Tejun Heo: "One patch to fix a typo in percpu section name. Given how long the bug has been there and that there hasn't been any report of brekage, it's unlikely to cause actual issues" * 'for-3.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: core: fix typo in percpu read_mostly section
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c build fix and cleanup from Wolfram Sang: "One buildfix for the i2c subsystem. While here, I decided to add the header cleanup as well" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: sun6i-p2wi: Remove duplicate inclusion of module.h i2c: mux: pca954x: fix dependencies
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: "This push fixes an error in sha512_ssse3 that leads to incorrect output as well as a memory leak in caam_jr when the module is unloaded" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: caam - fix memleak in caam_jr module crypto: sha512_ssse3 - fix byte count to bit count conversion
-
Cristian Stoica authored
This patch fixes a memory leak that appears when caam_jr module is unloaded. Cc: <stable@vger.kernel.org> # 3.13+ Signed-off-by:
Cristian Stoica <cristian.stoica@freescale.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
- 09 Jul, 2014 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fixes from Bjorn Helgaas: "Just a fix for the device reset path and an email address update. Virtualization - Fix "wait for pending transactions" for PCI AF reset (Alex Williamson) Miscellaneous - Update mx6 PCI driver maintainer email (Fabio Estevam)" * tag 'pci-v3.16-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: MAINTAINERS: Update mx6 PCI driver maintainer's email PCI: Fix unaligned access in AF transaction pending test
-
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fsLinus Torvalds authored
Pull f2fs bugfixes from Jaegeuk Kim: "This includes a couple of bug fixes found by xfstests. In addition, one critical bug was reported by Brian Chadwick, which is falling into the infinite loop in balance_dirty_pages. And it turned out due to the IO merging policy in f2fs, which was newly merged in 3.16. - fix normal and recovery path for fallocated regions - fix error case mishandling - recover renamed fsync inodes correctly - fix to get out of infinite loops in balance_dirty_pages - fix kernel NULL pointer error" * tag 'f2fs-fixes-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: f2fs: avoid to access NULL pointer in issue_flush_thread f2fs: check bdi->dirty_exceeded when trying to skip data writes f2fs: do checkpoint for the renamed inode f2fs: release new entry page correctly in error path of f2fs_rename f2fs: fix error path in init_inode_metadata f2fs: check lower bound nid value in check_nid_range f2fs: remove unused variables in f2fs_sm_info f2fs: fix not to allocate unnecessary blocks during fallocate f2fs: recover fallocated data and its i_size together f2fs: fix to report newly allocate region as extent
-
Chao Yu authored
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=75861 Denis 2014-05-10 11:28:59 UTC reported: "F2FS-fs (mmcblk0p28): mounting.. Unable to handle kernel NULL pointer dereference at virtual address 00000018 ... [<c0a2f678>] (_raw_spin_lock+0x3c/0x70) from [<c03a0330>] (issue_flush_thread+0x50/0x17c) [<c03a0330>] (issue_flush_thread+0x50/0x17c) from [<c01b4064>] (kthread+0x98/0xa4) [<c01b4064>] (kthread+0x98/0xa4) from [<c0108060>] (kernel_thread_exit+0x0/0x8)" This patch assign cmd_control_info in sm_info before issue_flush_thread is being created, so this make sure that issue flush thread will have no chance to access invalid info in fcc. Signed-off-by:
Chao Yu <chao2.yu@samsung.com> Reviewed-by:
Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org>
-
Jaegeuk Kim authored
If we don't check the current backing device status, balance_dirty_pages can fall into infinite pausing routine. This can be occurred when a lot of directories make a small number of dirty dentry pages including files. Reported-by:
Brian Chadwick <brianchad@westnet.com.au> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org>
-
Jaegeuk Kim authored
If an inode is renamed, it should be registered as file_lost_pino to conduct checkpoint at f2fs_sync_file. Otherwise, the inode cannot be recovered due to no dent_mark in the following scenario. Note that, this scenario is from xfstests/322. 1. create "a" 2. fsync "a" 3. rename "a" to "b" 4. fsync "b" 5. Sudden power-cut After recovery is done, "b" should be seen. However, the result shows "a", since the recovery procedure does not enter recover_dentry due to no dent_mark. The reason is like below. - The nid of "a" is checkpointed during #2, f2fs_sync_file. - The inode page for "b" produced by #3 is written without dent_mark by sync_node_pages. So, this patch fixes this bug by assinging file_lost_pino to the "a"'s inode. If the pino is lost, f2fs_sync_file conducts checkpoint, and then recovers the latest pino and its dentry information for further recovery. Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org>
-
Chao Yu authored
This patch correct releasing code of new_page to avoid BUG_ON in error patch of f2fs_rename. Signed-off-by:
Chao Yu <chao2.yu@samsung.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org>
-
Chao Yu authored
If we fail in this path: ->init_inode_metadata ->make_empty_dir ->get_new_data_page ->grab_cache_page return -ENOMEM We will bug on in error path of init_inode_metadata when call remove_inode_page because i_block = 2 (one inode block will be released later & one dentry block). We should release the dentry block in init_inode_metadata to avoid this BUG_ON, and avoid leak of dentry block resource, because we never have second chance to release that block in ->evict_inode as in upper error path we make this inode 'bad'. Signed-off-by:
Chao Yu <chao2.yu@samsung.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org>
-
Chao Yu authored
This patch add lower bound verification for nid in check_nid_range, so nids reserved like 0, node, meta passed by caller could be checked there. And then check_nid_range could be used in f2fs_nfs_get_inode for simplifying code. Signed-off-by:
Chao Yu <chao2.yu@samsung.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org>
-
Chao Yu authored
Remove unused variables in struct f2fs_sm_info. Signed-off-by:
Chao Yu <chao2.yu@samsung.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org>
-
- 08 Jul, 2014 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-stagingLinus Torvalds authored
Pull hwmon fixes from Guenter Roeck: "Fix a number of zero-day bugs, mostly found with module test scripts. Nothing major, but potentially annoying and worthwhile to fix" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (adc128d818) Drop write support on inX_input attributes hwmon: (emc2103) Clamp limits instead of bailing out hwmon: (adm1031) Fix writes to limit registers hwmon: (adm1021) Fix cache problem when writing temperature limits hwmon: (adm1029) Ensure the fan_div cache is updated in set_fan_div hwmon: (amc6821) Fix permissions for temp2_input hwmon: (ntc_thermistor) Correct information printed during probe
-
- 07 Jul, 2014 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linuxLinus Torvalds authored
Pull thermal fixes from Zhang Rui: "Specifics: - update Email address of Thermal subsystem maintainer Eduardo Valentin. - fix a problem that unloading thermal module results in kernel crash because a non-exist device file is removed on thermal unload. - fix a problem that critical trip point is set wrongly on latest i.MX6 SOC and results in system critical shutdown. - a couple of fixes to Tmon tool, of-thermal code and ti thermal driver" * 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: tmon: set umask to a reasonable value tmon: Check log file for common secuirty issues tools/thermal: tmon: fix compilation errors when building statically thermal: ti-soc-thermal: ti-bandgap.c: Cleaning up wrong address is checked Thermal: imx: correct critical trip temperature setting thermal: Bind cooling devices with the correct arguments thermal: Add braces around suspect code thermal: hwmon: Make the check for critical temp valid consistent MAINTAINERS: Update Eduardo Valentin's email address
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: "A few tiny HID subsystem fixes for 3.16" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: use multi input quirk for 22b9:2968 HID: sensor-hub: fix potential memory leak HID: usbhid: quirk for PM1610 and PM1640 Touchscreen. HID: rmi: Protect PM-only functions by #ifdef CONFIG_PM HID: sensor-hub: introduce Kconfig dependency on IOMEM HID: sensor-hub: make dyn_callback_lock IRQ-safe
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fixes from Linus Walleij: "Two fixes for the pin control subsystem, both relating to the error path in probe() I'm a bit snowed under by mail but these have boiled in linux-next and should propagate to you" * tag 'pinctrl-v3.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: berlin: fix an error code in berlin_pinctrl_probe() pinctrl: sunxi: Fix potential null pointer dereference
-
Guenter Roeck authored
Writes into input registers doesn't make sense, even more so since the writes actually ended up writing into the maximum limit registers. Drop it. Cc: stable@vger.kernel.org Reviewed-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
It is customary to clamp limits instead of bailing out with an error if a configured limit is out of the range supported by the driver. This simplifies limit configuration, since the user will not typically know chip and/or driver specific limits. Reviewed-by:
Jean Delvare <jdelvare@suse.de> Cc: stable@vger.kernel.org Signed-off-by:
Guenter Roeck <linux@roeck-us.net>
-
Wen-chien Jesse Sung authored
This device generates ABS_Z and ABS_RX events instead of ABS_X and ABS_Y. Signed-off-by:
Wen-chien Jesse Sung <jesse.sung@canonical.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
Guenter Roeck authored
Upper limit for write operations to temperature limit registers was clamped to a fractional value. However, limit registers do not support fractional values. As a result, upper limits of 127.5 degrees C or higher resulted in a rounded limit of 128 degrees C. Since limit registers are signed, this was stored as -128 degrees C. Clamp limits to (-55, +127) degrees C to solve the problem. Value on writes to auto_temp[12]_min and auto_temp[12]_max were not clamped at all, but masked. As a result, out-of-range writes resulted in a more or less arbitrary limit. Clamp those attributes to (0, 127) degrees C for more predictable results. Cc: Axel Lin <axel.lin@ingics.com> Cc: stable@vger.kernel.org Reviewed-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
Guenter Roeck <linux@roeck-us.net>
-
- 06 Jul, 2014 4 commits
-
-
Linus Torvalds authored
-
git://git.secretlab.ca/git/linuxLinus Torvalds authored
Pull devicetree bugfix from Grant Likely: "Important bug fix for parsing 64-bit addresses on 32-bit platforms. Without this patch the kernel will try to use memory ranges that cannot be reached" * tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: of: Check for phys_addr_t overflows in early_init_dt_add_memory_arch
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is a set of 13 fixes, a MAINTAINERS update and a sparse update. The fixes are mostly correct value initialisations, avoiding NULL derefs and some uninitialised pointer avoidance. All the patches have been incubated in -next for a few days. The final patch (use the scsi data buffer length to extract transfer size) has been rebased to add a cc to stable, but only the commit message has changed" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] use the scsi data buffer length to extract transfer size virtio-scsi: fix various bad behavior on aborted requests virtio-scsi: avoid cancelling uninitialized work items ibmvscsi: Add memory barriers for send / receive ibmvscsi: Abort init sequence during error recovery qla2xxx: Fix sparse warning in qla_target.c. bnx2fc: Improve stats update mechanism bnx2fc: do not scan uninitialized lists in case of error. fc: ensure scan_work isn't active when freeing fc_rport pm8001: Fix potential null pointer dereference and memory leak. MAINTAINERS: Update LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) maintainers Email IDs be2iscsi: remove potential junk pointer free be2iscsi: add an missing goto in error path scsi_error: set DID_TIME_OUT correctly scsi_error: fix invalid setting of host byte
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "i915, tda998x and vmwgfx fixes, The main one is i915 fix for missing VGA connectors, along with some fixes for the tda998x from Russell fixing some modesetting problems. (still on holidays, but got a spare moment to find these)" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/vmwgfx: Fix incorrect write to read-only register v2: drm/i915: Drop early VLV WA to fix Voltage not getting dropped to Vmin drm/i915: only apply crt_present check on VLV drm/i915: Wait for vblank after enabling the primary plane on BDW drm/i2c: tda998x: add some basic mode validation drm/i2c: tda998x: faster polling for edid drm/i2c: tda998x: move drm_i2c_encoder_destroy call
-
- 05 Jul, 2014 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "This week's arm-soc fixes: - A set of of OMAP patches that we had missed Tony's pull request of: * Reset fix for am43xx * Proper OPP table for omap5 * Fix for SoC detection of one of the DRA7 SoCs * hwmod updates to get SATA and OCP to work on omap5 (drivers merged in 3.16) * ... plus a handful of smaller fixes - sunxi needed to re-add machine specific restart code that was removed in anticipation of a watchdog driver being merged for 3.16, and it didn't make it in. - Marvell fixes for PCIe on SMP and a big-endian fix. - A trivial defconfig update to make my capri test board boot with bcm_defconfig again. ... and a couple of MAINTAINERS updates, one to claim new Keystone drivers that have been merged, and one to merge MXS and i.MX (both Freescale platforms). The largest diffs come from the hwmod code for omap5 and the re-add of the restart code on sunxi. The hwmod stuff is quite late at this point but it slipped through cracks repeatedly while coming up the maintainer chain and only affects the one SoC so risk is low" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: Add few more Keystone drivers MAINTAINERS: merge MXS entry into IMX one ARM: sunxi: Reintroduce the restart code for A10/A20 SoCs ARM: mvebu: fix cpuidle implementation to work on big-endian systems ARM: mvebu: update L2/PCIe deadlock workaround after L2CC cleanup ARM: mvebu: move Armada 375 external abort logic as a quirk ARM: bcm: Fix bcm and multi_v7 defconfigs ARM: dts: dra7-evm: remove interrupt binding ARM: OMAP2+: Fix parser-bug in platform muxing code ARM: DTS: dra7/dra7xx-clocks: ATL related changes ARM: OMAP2+: drop unused function ARM: dts: am43x-epos-evm: Add Missing cpsw-phy-sel for am43x-epos-evm ARM: dts: omap5: Update CPU OPP table as per final production Manual ARM: DRA722: add detection of SoC information ARM: dts: Enable twl4030 off-idle configuration for selected omaps ARM: OMAP5: hwmod: Add ocp2scp3 and sata hwmods ARM: OMAP2+: hwmod: Change hardreset soc_ops for AM43XX
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "A few minor fixlets in ARM SoC irq drivers and a fix for a memory leak which I introduced in the last round of cleanups :(" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Fix memory leak when calling irq_free_hwirqs() irqchip: spear_shirq: Fix interrupt offset irqchip: brcmstb-l2: Level-2 interrupts are edge sensitive irqchip: armada-370-xp: Mask all interrupts during initialization.
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
Fixes for 3.16-rc3; most importantly Jesse brings back VGA he took away on a bunch of machines. Also a vblank fix for BDW and a power workaround fix for VLV. * tag 'drm-intel-fixes-2014-07-03' of git://anongit.freedesktop.org/drm-intel: drm/i915: Drop early VLV WA to fix Voltage not getting dropped to Vmin drm/i915: only apply crt_present check on VLV drm/i915: Wait for vblank after enabling the primary plane on BDW
-
git://people.freedesktop.org/~thomash/linuxDave Airlie authored
fix to a 3.15 commit. * 'vmwgfx-fixes-3.16' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Fix incorrect write to read-only register v2:
-
git://ftp.arm.linux.org.uk/~rmk/linux-cuboxDave Airlie authored
mode fixes for tda998x. * 'tda998x-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox: drm/i2c: tda998x: add some basic mode validation drm/i2c: tda998x: faster polling for edid drm/i2c: tda998x: move drm_i2c_encoder_destroy call
-
Fabio Estevam authored
Use Shawn's email address from Freescale. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Shawn Guo <shawn.guo@freescale.com>
-
Keith Busch authored
irq_free_hwirqs() always calls irq_free_descs() with a cnt == 0 which makes it a no-op since the interrupt count to free is decremented in itself. Fixes: 7b6ef126Signed-off-by:
Keith Busch <keith.busch@intel.com> Acked-by:
David Rientjes <rientjes@google.com> Link: http://lkml.kernel.org/r/1404167084-8070-1-git-send-email-keith.busch@intel.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull ARM64 fixes from Catalin Marinas: - Exception level check at boot time (for completeness, not triggering any bug before) - I/D-cache synchronisation logic for huge pages - Config symbol typo * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: fix el2_setup check of CurrentEL arm64: mm: Make icache synchronisation logic huge page aware arm64: mm: Fix horrendous config typo
-
Santosh Shilimkar authored
Update MAINTAINERS file for recently added reset controller, AEMIF and clocksource driver for Keystone SOCs. The EMIF memory controller driver is also added along with AEMIF. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Cc: Kevin Hilman <khilman@linaro.org> Cc: Mike Turquette <mturquette@linaro.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Shawn Guo authored
The mach-mxs platform is actually co-maintained by myself and pengutronix folks. Also it's hosted in the same kernel tree as IMX. So let's merge the entry into IMX one. Signed-off-by:
Shawn Guo <shawn.guo@freescale.com> Acked-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Olof Johansson <olof@lixom.net>
-
git://git.infradead.org/linux-mvebuOlof Johansson authored
mvebu fixes for v3.16 (round #2) - mvebu - Fix PCIe deadlock now that SMP is enabled - Fix cpuidle for big-endian systems * tag 'mvebu-fixes-3.16-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: fix cpuidle implementation to work on big-endian systems ARM: mvebu: update L2/PCIe deadlock workaround after L2CC cleanup ARM: mvebu: move Armada 375 external abort logic as a quirk Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Maxime Ripard authored
This partly reverts commits 55360050 (ARM: sunxi: Remove reset code from the platform) and 5e669ec5 (ARM: sunxi: Remove init_machine callback) for the sun4i, sun5i and sun7i families. This is needed because the watchdog counterpart of these commits was dropped, and didn't make it into 3.16. In order to still be able to reboot the board, we need to reintroduce that code. Of course, the long term view is still to get rid of that code in mach-sunxi. Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'omap-for-v3.16/fixes-against-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge OMAP fixes from Tony Lindgren: Fixes for omaps for issues discovered during the merge window and enabling of a few features that had to wait for the driver dependencies to clear. The fixes included are: - Fix am43xx hard reset flags - Fix SoC detection for DRA722 - Fix CPU OPP table for omap5 - Fix legacy mux parser bug if requested muxname is a prefix of multiple mux entries - Fix qspi interrupt binding that relies on the irq crossbar that has not yet been enabled - Add missing phy_sel for am43x-epos-evm - Drop unused gic_init_irq() that is no longer needed And the enabling of features that had driver dependencies are: - Change dra7 to use Audio Tracking Logic clock instead of a fixed clock now that the clock driver for it has been merged - Enable off idle configuration for selected omaps as all the kernel dependencies for device tree based booting are finally merged as this is needed to get the automated PM tests working finally with device tree based booting - Add hwmod entry for ocp2scp3 for omap5 to get sata working as all the driver dependencies are now in the kernel and this patch fell through the cracks during the merge window * tag 'omap-for-v3.16/fixes-against-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: dra7-evm: remove interrupt binding ARM: OMAP2+: Fix parser-bug in platform muxing code ARM: DTS: dra7/dra7xx-clocks: ATL related changes ARM: OMAP2+: drop unused function ARM: dts: am43x-epos-evm: Add Missing cpsw-phy-sel for am43x-epos-evm ARM: dts: omap5: Update CPU OPP table as per final production Manual ARM: DRA722: add detection of SoC information ARM: dts: Enable twl4030 off-idle configuration for selected omaps ARM: OMAP5: hwmod: Add ocp2scp3 and sata hwmods ARM: OMAP2+: hwmod: Change hardreset soc_ops for AM43XX
-
- 04 Jul, 2014 2 commits
-
-
Dan Carpenter authored
We are returning success here because PTR_ERR(NULL) is zero. We should be returning -ENODEV. Fixes: 3de68d33 ('pinctrl: berlin: add the core pinctrl driver for Marvell Berlin SoCs') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
git://neil.brown.name/mdLinus Torvalds authored
Pull md bugfixes from Neil Brown: "Two minor bugfixes for md in 3.16" * tag 'md/3.16-fixes' of git://neil.brown.name/md: md: flush writes before starting a recovery. md: make sure GET_ARRAY_INFO ioctl reports correct "clean" status
-