Grant Grundler says:

====================
usbnet: speed reporting for devices without MDIO

This series introduces support for USB network devices that report
speed as a part of their protocol, not emulating an MII to be accessed
over MDIO.

v2: rebased on recent upstream changes
v3: incorporated hints on naming and comments
v4: fix misplaced hunks; reword some commit messages;
    add same change for cdc_ether
v4-repost: added "net-next" to subject and Andrew Lunn's Reviewed-by

I'm reposting Oliver Neukum's <oneukum@suse.com> patch series with
fix ups for "misplaced hunks" (landed in the wrong patches).
Please fixup the "author" if "git am" fails to attribute the
patches 1-3 (of 4) to Oliver.

I've tested v4 series with "5.12-rc3+" kernel on Intel NUC6i5SYB
and + Sabrent NT-S25G. Google Pixelbook Go (chromeos-4.4 kernel)
+ Alpha Network AUE2500C were connected directly to the NT-S25G
to get 2.5Gbps link rate:
Settings for enx002427880815:
        Supported ports: [  ]
        Supported link modes:   Not reported
        Supported pause frame use: No
        Supports auto-negotiation: No
        Supported FEC modes: Not reported
        Advertised link modes:  Not reported
        Advertised pause frame use: No
        Advertised auto-negotiation: No
        Advertised FEC modes: Not reported
        Speed: 2500Mb/s
        Duplex: Half
        Auto-negotiation: off
        Port: Twisted Pair
        PHYAD: 0
        Transceiver: internal
        MDI-X: Unknown
        Current message level: 0x00000007 (7)
                               drv probe link
        Link detected: yes

"Duplex" is a lie since we get no information about it.

I expect "Auto-Negotiation" is always true for cdc_ncm and
cdc_ether devices and perhaps someone knows offhand how
to have ethtool report "true" instead.

But this is good step in the right direction.

base-commit: 1c273e10
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Until very recently, the usbnet framework only had support functions
for devices which reported the link speed by explicitly querying the
PHY over a MDIO interface. However, the cdc_ether devices send
notifications when the link state or link speeds change and do not
expose the PHY (or modem) directly.

Support funtions (e.g. usbnet_get_link_ksettings_internal()) to directly
query state recorded by the cdc_ether driver were added in a previous patch.

Instead of cdc_ether spewing the link speed into the dmesg buffer,
record the link speed encoded in these notifications and tell the
usbnet framework to use the new functions to get link speed/state.

User space can now get the most recent link speed/state using ethtool.

v4: added to series since cdc_ether uses same notifications
    as cdc_ncm driver.
Signed-off-by: Grant Grundler <grundler@chromium.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Until very recently, the usbnet framework only had support functions
for devices which reported the link speed by explicitly querying the
PHY over a MDIO interface. However, the cdc_ncm devices send
notifications when the link state or link speeds change and do not
expose the PHY (or modem) directly.

Support funtions (e.g. usbnet_get_link_ksettings_internal()) to directly
query state recorded by the cdc_ncm driver were added in a previous patch.

So instead of cdc_ncm spewing the link speed into the dmesg buffer,
record the link speed encoded in these notifications and tell the
usbnet framework to use the new functions to get link speed/state.
Link speed/state is now available via ethtool.

This is especially useful given all current RTL8156 devices emit
a connection/speed status notification every 32ms and this would
fill the dmesg buffer. This implementation replaces the one
recently submitted in de658a19 :
   "net: usb: cdc_ncm: don't spew notifications"

v2: rebased on upstream
v3: changed variable names
v4: rewrote commit message
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Tested-by: Roland Dreier <roland@kernel.org>
Signed-off-by: Grant Grundler <grundler@chromium.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The old method for reporting link speed assumed a driver uses the
generic phy (mii) MDIO read/write functions. CDC devices don't
expose the phy.

Add a primitive internal version reporting back directly what
the CDC notification/status operations recorded.

v2: rebased on upstream
v3: changed names and made clear which units are used
v4: moved hunks to correct patch; rewrote commmit messages
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Tested-by: Roland Dreier <roland@kernel.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Tested-by: Grant Grundler <grundler@chromium.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The generic functions assumed devices provided an MDIO interface (accessed
via older mii code, not phylib). This is true only for genuine ethernet.

Devices with a higher level of abstraction or based on different
technologies do not have MDIO. To support this case, first rename
the existing functions with _mii suffix.

v2: rebased on changed upstream
v3: changed names to clearly say that this does NOT use phylib
v4: moved hunks to correct patch; reworded commmit messages

Signed-off-by : Oliver Neukum <oneukum@suse.com>
Tested-by: Roland Dreier <roland@kernel.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Tested-by: Grant Grundler <grundler@chromium.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Userspace sends tcp connection (sock) destroy on network switch
i.e switching the default network of the device between multiple
networks(Cellular/Wifi/Ethernet).

Kernel though doesn't send reset for the connections in SYN-SENT state
and these connections continue to remain.
Even as per RFC 793, there is no hard rule to not send RST on ABORT in
this state.

Modify tcp_abort and tcp_disconnect behavior to send RST for connections
in syn-sent state to avoid lingering connections on network switch.
Signed-off-by: Manoj Basapathi <manojbm@codeaurora.org>
Signed-off-by: Sauvik Saha <ssaha@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver can match via multiple methods.  Its acpi_device_id table is
referenced via ACPI_PTR() so it will be unused for !CONFIG_ACPI builds:

  drivers/net/ethernet/smsc/smsc911x.c:2652:36: warning:
    ‘smsc911x_acpi_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Limiting the scope of the variable vector_ring_chain to the block where it
is used.

Fixes: 424eb834 ("net: hns3: Unified HNS3 {VF|PF} Ethernet Driver for hip08 SoC")
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, we can specify ifindex on link creation. This change allows
to specify ifindex when a device is moved to another network namespace.

Even now, a device ifindex can be changed if there is another device
with the same ifindex in the target namespace. So this change doesn't
introduce completely new behavior, it adds more control to the process.

CRIU users want to restore containers with pre-created network devices.
A user will provide network devices and instructions where they have to
be restored, then CRIU will restore network namespaces and move devices
into them. The problem is that devices have to be restored with the same
indexes that they have before C/R.

Cc: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
Suggested-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These patches fix a series of spelling errors in net/nfc module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix kernel-doc warning:

Documentation/networking/tipc:66: /home/sfr/next/next/net/tipc/name_table.c
  :558: WARNING: Unexpected indentation.
Documentation/networking/tipc:66: /home/sfr/next/next/net/tipc/name_table.c
  :559: WARNING: Block quote ends without a blank line; unexpected unindent.

Due to blank line missing.

Fixes: 908148bc ("tipc: refactor tipc_sendmsg() and tipc_lookup_anycast()")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/netdev/20210318172255.63185609@canb.auug.org.au/Signed-off-by: Wu XiangCheng <bobwxc@email.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

struct ip6_sf_socklist and ipv6_mc_socklist are per-socket MLD data.
These data are protected by rtnl lock, socket lock, and RCU.
So, when these are used, it verifies whether rtnl lock is acquired or not.

ip6_mc_msfget() is called by do_ipv6_getsockopt().
But caller doesn't acquire rtnl lock.
So, when these data are used in the ip6_mc_msfget() lockdep warns about it.
But accessing these is actually safe because socket lock was acquired by
do_ipv6_getsockopt().

So, it changes lockdep annotation from rtnl lock to socket lock.
(rtnl_dereference -> sock_dereference)

Locking graph for mld data is like below:

When writing mld data:
do_ipv6_setsockopt()
    rtnl_lock
    lock_sock
    (mld functions)
        idev->mc_lock(if per-interface mld data is modified)

When reading mld data:
do_ipv6_getsockopt()
    lock_sock
    ip6_mc_msfget()

Splat looks like:
=============================
WARNING: suspicious RCU usage
5.12.0-rc4+ #503 Not tainted
-----------------------------
net/ipv6/mcast.c:610 suspicious rcu_dereference_protected() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
1 lock held by mcast-listener-/923:
 #0: ffff888007958a70 (sk_lock-AF_INET6){+.+.}-{0:0}, at:
ipv6_get_msfilter+0xaf/0x190

stack backtrace:
CPU: 1 PID: 923 Comm: mcast-listener- Not tainted 5.12.0-rc4+ #503
Call Trace:
 dump_stack+0xa4/0xe5
 ip6_mc_msfget+0x553/0x6c0
 ? ipv6_sock_mc_join_ssm+0x10/0x10
 ? lockdep_hardirqs_on_prepare+0x3e0/0x3e0
 ? mark_held_locks+0xb7/0x120
 ? lockdep_hardirqs_on_prepare+0x27c/0x3e0
 ? __local_bh_enable_ip+0xa5/0xf0
 ? lock_sock_nested+0x82/0xf0
 ipv6_get_msfilter+0xc3/0x190
 ? compat_ipv6_get_msfilter+0x300/0x300
 ? lock_downgrade+0x690/0x690
 do_ipv6_getsockopt.isra.6.constprop.13+0x1809/0x29e0
 ? do_ipv6_mcast_group_source+0x150/0x150
 ? register_lock_class+0x1750/0x1750
 ? kvm_sched_clock_read+0x14/0x30
 ? sched_clock+0x5/0x10
 ? sched_clock_cpu+0x18/0x170
 ? find_held_lock+0x3a/0x1c0
 ? lock_downgrade+0x690/0x690
 ? ipv6_getsockopt+0xdb/0x1b0
 ipv6_getsockopt+0xdb/0x1b0
[ ... ]

Fixes: 88e2ca30 ("mld: convert ifmcaddr6 to RCU")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some lines of code can be merged into an equivalent 'skb_add_rx_frag()'
call which is less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This ++ is confusing. It looks duplicated with the one already performed in
'skb_fill_page_desc()'.

In fact, it is harmless. 'nr_frags' is written twice with the same value.
Once, because of the nr_frags++, and once because of the 'nr_frags = i + 1'
in 'skb_fill_page_desc()'.

So axe this post-increment to avoid confusion.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some lines of code can be merged into an equivalent 'skb_add_rx_frag()'
call which is less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

'page_address(skb_frag_page()) + skb_frag_off()' can be replaced by an
equivalent 'skb_frag_address()' which is less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no need to use 'list_for_each_entry_safe' here, as nothing is
removed from the list in the 'for' loop.
Use 'list_for_each_entry' instead, it is slightly less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

X.25 Layer 3 (the Packet Layer) expects layer 2 to provide a reliable
datalink service such that no packets are reordered or dropped. And
X.25 Layer 2 (the LAPB layer) is indeed designed to provide such service.

However, this reliability is not preserved when a driver calls "netif_rx"
to deliver the received packets to layer 3, because "netif_rx" will put
the packets into per-CPU queues before they are delivered to layer 3.
If there are multiple CPUs, the order of the packets may not be preserved.
The per-CPU queues may also drop packets if there are too many.

Therefore, we should not call "netif_rx" to let it queue the packets.
Instead, we should use our own queue that won't reorder or drop packets.

This patch changes all X.25 drivers to use their own queues instead of
calling "netif_rx". The patch also documents this requirement in the
"x25-iface" documentation.

Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

'skb_push()'/'skb_postpush_rcsum()' can be replaced by an equivalent
'skb_push_rcsum()' which is less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-updates-2021-04-02

This series provides trivial updates and cleanup to mlx5 driver

1) Support for matching on ct_state inv and rel flag in connection tracking
2) Reject TC rules that redirect from a VF to itself
3) Parav provided some E-Switch cleanups that could be summarized to:
  3.1) Packing and Reduce structure sizes
  3.2) Dynamic allocation of rate limit tables and structures
4) Vu Makes the netdev arfs and vlan tables allocation dynamic.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Ong Boon Leong says:

====================
stmmac: Add XDP support

This is the v4 patch series for adding XDP native support to stmmac.

Changes in v4:
5/6: Move TX clean timer setup to the end of NAPI RX process and
     group it under stmmac_finalize_xdp_rx().
     Also, fixed stmmac_xdp_xmit_back() returns STMMAC_XDP_CONSUMED
     if XDP buffer conversion to XDP frame fails.

6/6: Move xdp_do_flush(0 into stmmac_finalize_xdp_rx() and combine
     the XDP verdict of XDP TX and XDP REDIRECT together.

I retested the patch series on the 'xdp2' and 'xdp_redirect' related to
changes above and found the result to be satisfactory.

History of previous patch series:
v3: https://patchwork.kernel.org/project/netdevbpf/cover/20210331154135.8507-1-boon.leong.ong@intel.com/
v2: https://patchwork.kernel.org/project/netdevbpf/list/?series=457757
v1: https://patchwork.kernel.org/project/netdevbpf/list/?series=457139

It will be great if community can help to test or review the v4 series
and provide me any input if any.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the support of XDP_REDIRECT to another remote cpu for
further action. It also implements ndo_xdp_xmit ops, enabling the driver
to transmit packets forwarded to it by XDP program running on another
interface.

This patch has been tested using "xdp_redirect_cpu" for XDP_REDIRECT
+ drop testing. It also been tested with "xdp_redirect" sample app
which can be used to exercise ndo_xdp_xmit ops. The burst traffics are
generated using pktgen_sample03_burst_single_flow.sh in samples/pktgen
directory.

v4: Move xdp_do_flush() processing into stmmac_finalize_xdp_rx() and
    combined the XDP verdict of XDP TX and REDIRECT together.

v3: Added 'nq->trans_start = jiffies' to avoid TX time-out as we are
    sharing TX queue between slow path and XDP. Thanks to Jakub Kicinski
    for point out.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds support for XDP_TX action which enables XDP program to
transmit back received frames.

This patch has been tested with the "xdp2" app located in samples/bpf
dir. The DUT receives burst traffic packet generated using pktgen script
'pktgen_sample03_burst_single_flow.sh'.

v4: Moved stmmac_tx_timer_arm() to be done once at the end of NAPI RX.
    Fixed stmmac_xdp_xmit_back() to return STMMAC_XDP_CONSUMED if
    XDP buffer to frame conversion fails. Thanks to Jakub's input.

v3: Added 'nq->trans_start = jiffies' to avoid TX time-out as we are
    sharing TX queue between slow path and XDP. Thanks to Jakub Kicinski
    for pointing out.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the initial XDP support to stmmac driver. It supports
XDP_PASS, XDP_DROP and XDP_ABORTED actions. Upcoming patches will add
support for XDP_TX and XDP_REDIRECT.

To support XDP headroom, this patch adds page_offset into RX buffer and
change the dma_sync_single_for_device|cpu(). The DMA address used for
RX operation are changed to take into page_offset too. As page_pool
can handle dma_sync_single_for_device() on behalf of driver with
PP_FLAG_DMA_SYNC_DEV flag, we skip doing that in stmmac driver.

Current stmmac driver supports split header support (SPH) in RX but
the flexibility of splitting header and payload at different position
makes it very complex to be supported for XDP processing. In addition,
jumbo frame is not supported in XDP to keep the initial codes simple.

This patch has been tested with the sample app "xdp1" located in
samples/bpf directory for both SKB and Native (XDP) mode. The burst
traffic generated using pktgen_sample03_burst_single_flow.sh in
samples/pktgen directory.

Changes in v3:
 - factor in xdp header and tail adjustment done by XDP program.
   Thanks to Jakub Kicinski for pointing out the gap in v2.

Changes in v2:
 - fix for "warning: variable 'len' set but not used" reported by lkp.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch organizes TX tail pointer update into a new function called
stmmac_flush_tx_descriptors() so that we can reuse it in stmmac_xmit(),
stmmac_tso_xmit() and up-coming XDP implementation.

Changes to v2:
 - Fix for warning: unused variable ‘desc_size’
   https://patchwork.hopto.org/static/nipa/457321/12170149/build_32bit/stderrSigned-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

SPH functionality splits header and payload according to split mode and
offsef fields (SPLM and SPLOFST). It is beneficials for Linux network
stack RX processing however it adds a lot of complexity in XDP
processing.

So, this patch makes the split-header (SPH) capability of the controller
is stored in "priv->sph_cap" and the enabling/disabling of SPH is decided
by "priv->sph".

This is to prepare initial XDP enabling for stmmac to disable the use of
SPH whenever XDP is enabled.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Certain platform likes Intel mGBE has independent hardware IRQ resources
for TX and RX DMA operation. In preparation to support XDP TX, we add IRQ
affinity hint to group both RX and TX queue of the same queue ID to the
same CPU.

Changes in v2:
 - IRQ affinity hint need to set to null before IRQ is released.
   Thanks to issue reported by Song, Yoong Siang.
Reported-by: Song, Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Dynamic allocate vlan table in mlx5e_priv for EN netdev
when needed. Don't allocate it for representor netdev.
Signed-off-by: Vu Pham <vuhuong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Dynamic allocate arfs table in mlx5e_priv for EN netdev
when needed. Don't allocate it for representor netdev.
Signed-off-by: Vu Pham <vuhuong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Since there are self loopback prevention mechanisms at the
VF level, offloading such rules which redirect from a VF
to itself in the eswitch will break the datapath since the
packets will be dropped once they go back to the vport they
came from.

Therefore, offloading such rules will be rejected and left to
be handled by SW.
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

ida_simple_alloc() and remove functions are deprecated.
Related change:
commit 3264ceec ("lib/idr.c: document that ida_simple_{get,remove}() are deprecated")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Function QoS related fields are already defined in qos related struct.
min and max rate are left out to mlx5_vport_info struct.

Move them to existing qos struct.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Structure mlx5_vport_info consumes 40 bytes of space due to a hole
in it. After packing it reduces to 32 bytes.

Currently:
pahole -C mlx5_vport_info drivers/net/ethernet/mellanox/mlx5/core/eswitch.o
struct mlx5_vport_info {
        u8                         mac[6];               /*     0     6 */
        u16                        vlan;                 /*     6     2 */
        u8                         qos;                  /*     8     1 */

        /* XXX 7 bytes hole, try to pack */

        u64                        node_guid;            /*    16     8 */
        int                        link_state;           /*    24     4 */
        u32                        min_rate;             /*    28     4 */
        u32                        max_rate;             /*    32     4 */
        bool                       spoofchk;             /*    36     1 */
        bool                       trusted;              /*    37     1 */

        /* size: 40, cachelines: 1, members: 9 */
        /* sum members: 31, holes: 1, sum holes: 7 */
        /* padding: 2 */
        /* last cacheline: 40 bytes */
};

After packing:

$ pahole -C mlx5_vport_info drivers/net/ethernet/mellanox/mlx5/core/eswitch.o

struct mlx5_vport_info {
        u8                         mac[6];               /*     0     6 */
        u16                        vlan;                 /*     6     2 */
        u64                        node_guid;            /*     8     8 */
        int                        link_state;           /*    16     4 */
        u32                        min_rate;             /*    20     4 */
        u32                        max_rate;             /*    24     4 */
        u8                         qos;                  /*    28     1 */
        u8                         spoofchk:1;           /*    29: 0  1 */
        u8                         trusted:1;            /*    29: 1  1 */

        /* size: 32, cachelines: 1, members: 9 */
        /* padding: 2 */
        /* bit_padding: 6 bits */
        /* last cacheline: 32 bytes */
};
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Add missing mutex_destroy() to pair with mutex_init().

This should be done only when table is initialized, hence perform
mutex_init() only when table is initialized.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

A device supports 128 rate limiters. A static table allocation consumes
8KB of memory even when rate is not configured.

Instead, allocate the table when at least one rate is configured.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Rate limit entry refcount can be incremented uniformly when it is newly
allocated or reused.
So simplify the code to increment refcount at one place.

Use decrement refcount helper in two routines.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

User helper routines to allocate and free rate limit table entries.
Subsequent patch extends use of these helpers to do allocation
during rate entry allocation callback.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Table max_size, min and max rate are constants initialized while table
is created. Reading it doesn't need to hold a table mutex. Hence, read
them without holding table mutex.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

mlx5_rl_entry structure is not properly packed as shown below. Due to this
an array of size 9144 bytes allocated which is aligned to 16Kbytes.
Hence, pack the structure and avoid the wastage.

This offers 8Kbytes of saving per mlx5_core_dev struct.

pahole -C mlx5_rl_entry  drivers/net/ethernet/mellanox/mlx5/core/en_main.o

Existing layout:

struct mlx5_rl_entry {
        u8                         rl_raw[48];           /*     0    48 */
        u16                        index;                /*    48     2 */

        /* XXX 6 bytes hole, try to pack */

        u64                        refcount;             /*    56     8 */
        /* --- cacheline 1 boundary (64 bytes) --- */
        u16                        uid;                  /*    64     2 */
        u8                         dedicated:1;          /*    66: 0  1 */

        /* size: 72, cachelines: 2, members: 5 */
        /* sum members: 60, holes: 1, sum holes: 6 */
        /* sum bitfield members: 1 bits (0 bytes) */
        /* padding: 5 */
        /* bit_padding: 7 bits */
        /* last cacheline: 8 bytes */
};

After alignment:

struct mlx5_rl_entry {
        u8                         rl_raw[48];           /*     0    48 */
        u64                        refcount;             /*    48     8 */
        u16                        index;                /*    56     2 */
        u16                        uid;                  /*    58     2 */
        u8                         dedicated:1;          /*    60: 0  1 */

        /* size: 64, cachelines: 1, members: 5 */
        /* padding: 3 */
        /* bit_padding: 7 bits */
};
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Fix the warning due to missing int.

WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
+       unsigned free_count;
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>