Pull modules fix from Luis Chamberlain:
 "One fix by Arnd far for modules which came in after the first pull
  request.

  The issue was found as part of some late compile tests with 0-day. I
  take it 0-day does some secondary late builds with after some initial
  ones"

* tag 'modules-6.4-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  module: include internal.h in module/dups.c

Pull more sysctl updates from Luis Chamberlain:
 "As mentioned on my first pull request for sysctl-next, for v6.4-rc1
  we're very close to being able to deprecating register_sysctl_paths().
  I was going to assess the situation after the first week of the merge
  window.

  That time is now and things are looking good. We only have one which
  had already an ACK for so I'm picking this up here now and the last
  patch is the one that uses an axe.

  I have boot tested the last patch and 0-day build completed
  successfully"

* tag 'sysctl-6.4-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  sysctl: remove register_sysctl_paths()
  kernel: pid_namespace: simplify sysctls with register_sysctl()

Pull uml updates from Richard Weinberger:

 - Make stub data pages configurable

 - Make it harder to mix user and kernel code by accident

* tag 'uml-for-linus-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
  um: make stub data pages size tweakable
  um: prevent user code in modules
  um: further clean up user_syms
  um: don't export printf()
  um: hostfs: define our own API boundary
  um: add __weak for exported functions

Pull UBI and UBIFS updates from Richard Weinberger:
 "UBI:

   - Fix error value for try_write_vid_and_data()

   - Minor cleanups

  UBIFS:

   - Fixes for various memory leaks

   - Minor cleanups"

* tag 'ubifs-for-linus-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  ubifs: Fix memleak when insert_old_idx() failed
  Revert "ubifs: dirty_cow_znode: Fix memleak in error handling path"
  ubifs: Fix memory leak in do_rename
  ubifs: Free memory for tmpfile name
  ubi: Fix return value overwrite issue in try_write_vid_and_data()
  ubifs: Remove return in compr_exit()
  ubi: Simplify bool conversion

Pull more power management updates from Rafael Wysocki:
 "These fix a hibernation test mode regression and clean up the
  intel_idle driver.

  Specifics:

   - Make test_resume work again after the changes that made hibernation
     open the snapshot device in exclusive mode (Chen Yu)

   - Clean up code in several places in intel_idle (Artem Bityutskiy)"

* tag 'pm-6.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  intel_idle: mark few variables as __read_mostly
  intel_idle: do not sprinkle module parameter definitions around
  intel_idle: fix confusing message
  intel_idle: improve C-state flags handling robustness
  intel_idle: further intel_idle_init_cstates_icpu() cleanup
  intel_idle: clean up intel_idle_init_cstates_icpu()
  intel_idle: use pr_info() instead of printk()
  PM: hibernate: Do not get block device exclusively in test_resume mode
  PM: hibernate: Turn snapshot_test into global variable

Pull more ACPI updates from Rafael Wysocki:
 "These add two ACPI-related quirks and extend support for Apple device
  properties supplied via ACPI _DSM.

  Specifics:

   - Do not turn off unused power resources during initialization on the
     Toshiba Click Mini (Hans de Goede)

   - Support strings in device properties supplied by ACPI _DSM on Apple
     platforms (Hector Martin)

   - Add an ACPI device ID quirk for Lenovo Yoga Tablet 2 (Marius Hoch)"

* tag 'acpi-6.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: property: Support strings in Apple _DSM props
  ACPI: x86: utils: Remove Lenovo Yoga Tablet 2's MAGN0001
  ACPI: PM: Do not turn of unused power resources on the Toshiba Click Mini

Pull more thermal control updates from Rafael Wysocki:
 "These are mostly cleanups on top of the previously merged thermal
  control changes plus some driver fixes and the removal of the Intel
  Menlow thermal driver.

  Specifics:

   - Add compatible DT bindings for imx6sll and imx6ul to fix a dtbs
     check warning (Stefan Wahren)

   - Update the example in the DT bindings to reflect changes with the
     ADC node name for QCom TM and TM5 (Marijn Suijten)

   - Fix comments for the cpuidle_cooling_register() function to match
     the function prototype (Chenggang Wang)

   - Fix inconsistent temperature read and some Mediatek variant board
     reboot by reverting a change and handling the temperature
     differently (AngeloGioacchino Del Regno)

   - Fix a memory leak in the initialization error path for the Mediatek
     driver (Kang Chen)

   - Use of_address_to_resource() in the Mediatek driver (Rob Herring)

   - Fix unit address in the QCom tsens driver DT bindings (Krzysztof
     Kozlowski)

   - Clean up the step-wise thermal governor (Zhang Rui)

   - Introduce thermal_zone_device() for accessing the device field of
     struct thermal_zone_device and two drivers use it (Daniel Lezcano)

   - Clean up the ACPI thermal driver a bit (Daniel Lezcano)

   - Delete the thermal driver for Intel Menlow platforms that is not
     expected to have any users (Rafael Wysocki)"

* tag 'thermal-6.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: intel: menlow: Get rid of this driver
  ACPI: thermal: Move to dedicated function sysfs extra attr creation
  ACPI: thermal: Use thermal_zone_device()
  thermal: intel: pch_thermal: Use thermal driver device to write a trace
  thermal: core: Encapsulate tz->device field
  thermal: gov_step_wise: Adjust code logic to match comment
  thermal: gov_step_wise: Delete obsolete comment
  dt-bindings: thermal: qcom-tsens: Correct unit address
  thermal/drivers/mediatek: Use of_address_to_resource()
  thermal/drivers/mediatek: Change clk_prepare_enable to devm_clk_get_enabled in mtk_thermal_probe
  thermal/drivers/mediatek: Use devm_of_iomap to avoid resource leak in mtk_thermal_probe
  thermal/drivers/mediatek: Add temperature constraints to validate read
  Revert "thermal/drivers/mediatek: Add delay after thermal banks initialization"
  thermal/drivers/cpuidle_cooling: Delete unmatched comments
  dt-bindings: thermal: Use generic ADC node name in examples
  dt-bindings: imx-thermal: Add imx6sll and imx6ul compatible

Merge tag 'pwm/for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "The bulk of this is trivial conversions to the new .remove_new()
  callback for drivers as part of Uwe's effort to clean that up.

  Other than that a driver is added for Apple devices and various small
  fixes are included for existing drivers.

  Last but not least, this finally gets rid of the old pwm_request() and
  pwm_free() APIs are removed since the last user was dropped in v6.3"

* tag 'pwm/for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (44 commits)
  pwm: Remove unused radix tree
  pwm: Delete deprecated functions pwm_request() and pwm_free()
  pwm: meson: Fix g12a ao clk81 name
  pwm: meson: Fix axg ao mux parents
  pwm: stm32: Enforce settings for PWM capture
  MAINTAINERS: Add entries for Apple PWM driver
  pwm: Add Apple PWM controller
  dt-bindings: pwm: Add Apple PWM controller
  pwm: mtk-disp: Configure double buffering before reading in .get_state()
  pwm: mtk-disp: Disable shadow registers before setting backlight values
  pwm: stm32-lp: Drop of_match_ptr for ID table
  pwm: rcar: Drop of_match_ptr for ID table
  dt-bindings: pwm: Convert Amlogic Meson PWM binding
  dt-bindings: pwm: mediatek: Add mediatek,mt7986 compatible
  pwm: xilinx: Convert to platform remove callback returning void
  pwm: vt8500: Convert to platform remove callback returning void
  pwm: tiehrpwm: Convert to platform remove callback returning void
  pwm: tiecap: Convert to platform remove callback returning void
  pwm: tegra: Convert to platform remove callback returning void
  pwm: sun4i: Convert to platform remove callback returning void
  ...

Pull soundwire updates from Vinod Koul:
 "This features AMD soundwire controller driver, a bunch of Intel
  changes for future platform support, sdw API updates etc:

   - Support for AMD soundwire controller

   - Intel driver updates to support future platforms

   - Core API sdw_nread/nwrite_no_pm updates to handle page boundaries"

* tag 'soundwire-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (38 commits)
  soundwire: intel_auxdevice: improve pm_prepare step
  soundwire: bus: Fix unbalanced pm_runtime_put() causing usage count underflow
  soundwire: intel: don't save hw_params for use in prepare
  soundwire: bus: Update sdw_nread/nwrite_no_pm to handle page boundaries
  soundwire: bus: Update kernel doc for no_pm functions
  soundwire: bus: Remove now outdated comments on no_pm IO
  soundwire: stream: uniquify dev_err() logs
  soundwire: stream: remove bus->dev from logs on multiple buses
  soundwire: amd: add pm_prepare callback and pm ops support
  soundwire: amd: handle SoundWire wake enable interrupt
  soundwire: amd: add runtime pm ops for AMD SoundWire manager driver
  soundwire: amd: add SoundWire manager interrupt handling
  soundwire: amd: enable build for AMD SoundWire manager driver
  soundwire: amd: register SoundWire manager dai ops
  soundwire: amd: Add support for AMD Manager driver
  soundwire: export sdw_compute_slave_ports() function
  soundwire: stream: restore cumulative bus bandwidth when compute_params callback failed
  soundwire: bandwidth allocation: Use hweight32() to calculate set bits
  soundwire: qcom: gracefully handle too many ports in DT
  soundwire: qcom: define hardcoded version magic numbers
  ...

Pull phy updates from Vinod Koul:
 "New support:
   - UFS PHY for Qualcomm SA8775p, SM7150
   - PCIe 2 lane phy support for sc8180x and PCIe PHY for SDX65
   - Mediatke hdmi phy support for mt8195
   - rockchip naneng combo phy support for RK358

  Updates:
   - Drop Thunder Bay eMMC PHY driver
   - RC support for PCIe phy for Qualcomm SDX55
   - SGMII support in WIZ driver for J721E
   - PCIe and multilink SGMII PHY support in cadence driver
   - Big pile of platform remove callback returning void conversions"

* tag 'phy-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (77 commits)
  phy: cadence: cdns-dphy-rx: Add common module reset support
  phy: ti: j721e-wiz: Add SGMII support in WIZ driver for J721E
  dt-bindings: phy: ti: phy-gmii-sel: Add support for J784S4 CPSW9G
  phy: ti: j721e-wiz: Fix unreachable code in wiz_mode_select()
  phy: cadence: Sierra: Add PCIe + SGMII PHY multilink configuration
  phy: mediatek: add support for phy-mtk-hdmi-mt8195
  phy: phy-mtk-hdmi: Add generic phy configure callback
  dt-bindings: phy: mediatek: hdmi-phy: Add mt8195 compatible
  phy: tegra: xusb: Add missing tegra_xusb_port_unregister for usb2_port and ulpi_port
  dt-bindings: phy: ti,phy-j721e-wiz: document clock-output-names
  dt-bindings: phy: ti,phy-j721e-wiz: drop assigned-clocks
  dt-bindings: phy: ti,phy-am654-serdes: drop assigned-clocks type
  dt-bindings: phy: cadence-torrent: drop assigned-clocks
  dt-bindings: phy: cadence-sierra: drop assigned-clocks
  phy: rockchip: remove unused hw_to_inno function
  phy: qualcomm: phy-qcom-qmp-ufs: add definitions for sa8775p
  dt-bindings: phy: qmp-ufs: describe the UFS PHY for sa8775p
  phy: qcom-qmp-pcie: drop sdm845_qhp_pcie_rx_tbl
  phy: qcom-qmp-pcie: sc8180x PCIe PHY has 2 lanes
  phy: qcom-qmp-ufs: Add SM7150 support
  ...

Pull dmaengine updates from Vinod Koul:
 "New support:

   - Apple admac t8112 device support

   - StarFive JH7110 DMA controller

  Updates:

   - Big pile of idxd updates to support IAA 2.0 device capabilities,
     DSA 2.0 Event Log and completion record faulting features and
     new DSA operations

   - at_xdmac supend & resume updates and driver code cleanup

   - k3-udma supend & resume support

   - k3-psil thread support for J784s4"

* tag 'dmaengine-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (57 commits)
  dmaengine: idxd: add per wq PRS disable
  dmaengine: idxd: add pid to exported sysfs attribute for opened file
  dmaengine: idxd: expose fault counters to sysfs
  dmaengine: idxd: add a device to represent the file opened
  dmaengine: idxd: add per file user counters for completion record faults
  dmaengine: idxd: process batch descriptor completion record faults
  dmaengine: idxd: add descs_completed field for completion record
  dmaengine: idxd: process user page faults for completion record
  dmaengine: idxd: add idxd_copy_cr() to copy user completion record during page fault handling
  dmaengine: idxd: create kmem cache for event log fault items
  dmaengine: idxd: add per DSA wq workqueue for processing cr faults
  dmanegine: idxd: add debugfs for event log dump
  dmaengine: idxd: add interrupt handling for event log
  dmaengine: idxd: setup event log configuration
  dmaengine: idxd: add event log size sysfs attribute
  dmaengine: idxd: make misc interrupt one shot
  dt-bindings: dma: snps,dw-axi-dmac: constrain the items of resets for JH7110 dma
  dt-bindings: dma: Drop unneeded quotes
  dmaengine: at_xdmac: align declaration of ret with the rest of variables
  dmaengine: at_xdmac: add a warning message regarding for unpaused channels
  ...

Pull hardware timestamp engine updates from Dipen Patel:
 "The changes for the hte subsystem include:

   - Add Tegra234 HTE provider and relevant DT bindings

   - Update MAINTAINERS file for the HTE subsystem"

* tag 'for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pateldipen1984/linux:
  hte: tegra-194: Use proper includes
  hte: Use device_match_of_node()
  hte: tegra-194: Fix off by one in tegra_hte_map_to_line_id()
  hte: tegra: fix 'struct of_device_id' build error
  hte: Use of_property_present() for testing DT property presence
  gpio: tegra186: Add Tegra234 hte support
  hte: handle nvidia,gpio-controller property
  hte: Deprecate nvidia,slices property
  hte: Add Tegra234 provider
  hte: Re-phrase tegra API document
  arm64: tegra: Add Tegra234 GTE nodes
  dt-bindings: timestamp: Deprecate nvidia,slices property
  dt-bindings: timestamp: Add Tegra234 support
  MAINTAINERS: Add HTE/timestamp subsystem details

Merge hibernation test mode fix for 6.4-rc1.

* pm-sleep:
  PM: hibernate: Do not get block device exclusively in test_resume mode
  PM: hibernate: Turn snapshot_test into global variable

Merge an ACPI power management quirk and a change related to the
handling of ACPI device properties for 6.4-rc1:

 - Do not turn off unused power resources during initialization on the
   Toshiba Click Mini (Hans de Goede).

 - Support strings in device properties supplied by ACPI _DSM on Apple
   platforms (Hector Martin).

* acpi-pm:
  ACPI: PM: Do not turn of unused power resources on the Toshiba Click Mini

* acpi-properties:
  ACPI: property: Support strings in Apple _DSM props

Merge additional thermal core and ACPI thermal changes for 6.4-rc1:

 - Clean up the step-wise thermal governor (Zhang Rui).

 - Introduce thermal_zone_device() for accessing the device field of
   struct thermal_zone_device and two drivers use it (Daniel Lezcano).

 - Clean up the ACPI thermal driver a bit (Daniel Lezcano).

 - Delete the thermal driver for Intel Menlow platforms that is not
   expected to have any users (Rafael Wysocki).

* thermal-core:
  thermal: intel: menlow: Get rid of this driver
  ACPI: thermal: Move to dedicated function sysfs extra attr creation
  ACPI: thermal: Use thermal_zone_device()
  thermal: intel: pch_thermal: Use thermal driver device to write a trace
  thermal: core: Encapsulate tz->device field
  thermal: gov_step_wise: Adjust code logic to match comment
  thermal: gov_step_wise: Delete obsolete comment

Two newly introduced functions are declared in a header that is not
included before the definition, causing a warning with sparse or
'make W=1':

kernel/module/dups.c:118:6: error: no previous prototype for 'kmod_dup_request_exists_wait' [-Werror=missing-prototypes]
  118 | bool kmod_dup_request_exists_wait(char *module_name, bool wait, int *dup_ret)
      |      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
kernel/module/dups.c:220:6: error: no previous prototype for 'kmod_dup_request_announce' [-Werror=missing-prototypes]
  220 | void kmod_dup_request_announce(char *module_name, int ret)
      |      ^~~~~~~~~~~~~~~~~~~~~~~~~

Add an explicit include to ensure the prototypes match.

Fixes: 8660484e ("module: add debugging auto-load duplicate module support")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304141440.DYO4NAzp-lkp@intel.com/Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>

The deprecation for register_sysctl_paths() is over. We can rejoice as
we nuke register_sysctl_paths(). The routine register_sysctl_table()
was the only user left of register_sysctl_paths(), so we can now just
open code and move the implementation over to what used to be
to __register_sysctl_paths().

The old dynamic struct ctl_table_set *set is now the point to
sysctl_table_root.default_set.

The old dynamic const struct ctl_path *path was being used in the
routine register_sysctl_paths() with a static:

static const struct ctl_path null_path[] = { {} };

Since this is a null path we can now just simplfy the old routine
and remove its use as its always empty.

This saves us a total of 230 bytes.

$ ./scripts/bloat-o-meter vmlinux.old vmlinux
add/remove: 2/7 grow/shrink: 1/1 up/down: 1015/-1245 (-230)
Function                                     old     new   delta
register_leaf_sysctl_tables.constprop          -     524    +524
register_sysctl_table                         22     497    +475
__pfx_register_leaf_sysctl_tables.constprop       -      16     +16
null_path                                      8       -      -8
__pfx_register_sysctl_paths                   16       -     -16
__pfx_register_leaf_sysctl_tables             16       -     -16
__pfx___register_sysctl_paths                 16       -     -16
__register_sysctl_base                        29      12     -17
register_sysctl_paths                         18       -     -18
register_leaf_sysctl_tables                  534       -    -534
__register_sysctl_paths                      620       -    -620
Total: Before=21259666, After=21259436, chg -0.00%
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>

register_sysctl_paths() is only required if your child (directories)
have entries and pid_namespace does not. So use register_sysctl_init()
instead where we don't care about the return value and use
register_sysctl() where we do.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Jeff Xu <jeffxu@google.com>
Link: https://lore.kernel.org/r/20230302202826.776286-9-mcgrof@kernel.org

Pull pin control updates from Linus Walleij:
 "Mostly drivers! Nothing special: some new Qualcomm chips as usual, and
  the new NXP S32 and nVidia BlueField-3.

  Core changes:

   - Make a lot of pin controllers with GPIO and irqchips immutable,
     i.e. not living structs, but const structs. This is driving a
     changed initiated by the irqchip maintainers.

  New drivers:

   - New driver for the NXP S32 SoC pin controller

   - As part of a thorough cleanup and restructuring of the
     Ralink/Mediatek drivers, the Ralink MIPS pin control drivers were
     folded into the Mediatek directory and the family is renamed
     "mtmips". The Ralink chips live on as Mediatek MIPS family where
     new variants can be added. As part of this work also the device
     tree bindings were reworked.

   - New subdriver for the Qualcomm SM7150 SoC.

   - New subdriver for the Qualcomm IPQ9574 SoC.

   - New driver for the nVidia BlueField-3 SoC.

   - Support for the Qualcomm PMM8654AU mixed signal circuit GPIO.

   - Support for the Qualcomm PMI632 mixed signal circuit GPIO.

  Improvements:

   - Add some missing pins and generic cleanups on the Renesas r8a779g0
     and r8a779g0 pin controllers. Generic Renesas extension for power
     source selection on several SoCs.

   - Misc cleanups for the Atmel AT91 and AT91-PIO4 pin controllers

   - Make the GPIO mode work on the Qualcomm SM8550-lpass-lpi driver.

   - Several device tree binding cleanups as the binding YAML syntax is
     solidifying"

* tag 'pinctrl-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (153 commits)
  pinctrl-bcm2835.c: fix race condition when setting gpio dir
  dt-bindings: pinctrl: qcom,sm8150: Drop duplicate function value "atest_usb2"
  dt-bindings: pinctrl: qcom: Add few missing functions
  pinctrl: qcom: spmi-gpio: Add PMI632 support
  dt-bindings: pinctrl: qcom,pmic-gpio: add PMI632
  pinctrl: wpcm450: select MFD_SYSCON
  pinctrl: qcom ssbi-gpio: Convert to immutable irq_chip
  pinctrl: qcom ssbi-mpp: Convert to immutable irq_chip
  pinctrl: qcom spmi-mpp: Convert to immutable irq_chip
  pinctrl: plgpio: Convert to immutable irq_chip
  pinctrl: pistachio: Convert to immutable irq_chip
  pinctrl: pic32: Convert to immutable irq_chip
  pinctrl: sx150x: Convert to immutable irq_chip
  pinctrl: stmfx: Convert to immutable irq_chip
  pinctrl: st: Convert to immutable irq_chip
  pinctrl: mcp23s08: Convert to immutable irq_chip
  pinctrl: equilibrium: Convert to immutable irq_chip
  pinctrl: npcm7xx: Convert to immutable irq_chip
  pinctrl: armada-37xx: Convert to immutable irq_chip
  pinctrl: nsp: Convert to immutable irq_chip
  ...

Pull VFIO updates from Alex Williamson:

 - Expose and allow R/W access to the PCIe DVSEC capability through
   vfio-pci, as we already do with the legacy vendor capability
   (K V P Satyanarayana)

 - Fix kernel-doc issues with structure definitions (Simon Horman)

 - Clarify ordering of operations relative to the kvm-vfio device for
   driver dependencies against the kvm pointer (Yi Liu)

* tag 'vfio-v6.4-rc1' of https://github.com/awilliam/linux-vfio:
  docs: kvm: vfio: Suggest KVM_DEV_VFIO_GROUP_ADD vs VFIO_GROUP_GET_DEVICE_FD ordering
  vfio: correct kdoc for ops structures
  vfio/pci: Add DVSEC PCI Extended Config Capability to user visible list.

Pull AFS updates from David Howells:
 "Three fixes to AFS directory handling:

   - Make sure that afs_read_dir() sees any increase in file size if the
     file unexpectedly changed on the server (e.g. due to another client
     making a change).

   - Make afs_getattr() always return the server's dir file size, not
     the locally edited one, so that pagecache eviction doesn't cause
     the dir file size to change unexpectedly.

   - Prevent afs_read_dir() from getting into an endless loop if the
     server indicates that the directory file size is larger than
     expected"

* tag 'afs-fixes-20230502' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: Avoid endless loop if file is larger than expected
  afs: Fix getattr to report server i_size on dirs, not local size
  afs: Fix updating of i_size with dv jump from server

Pull backlight updates from Lee Jones:
 "Fix-ups:
   - Add / improve Device Tree bindings
   - Convert (int) .remove functions to (void) .remove_new
   - Rid 'defined but not used' warnings
   - Remove ineffective casts and pointer stubs
   - Use specifically crafted API for testing DT property presence"

* tag 'backlight-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: as3711: Use of_property_read_bool() for boolean properties
  backlight: hx8357: Use of_property_present() for testing DT property presence
  backlight: arcxcnn_bl: Drop of_match_ptr for ID table
  backlight: lp855x: Mark OF related data as maybe unused
  backlight: sky81452-backlight: Convert to platform remove callback returning void
  backlight: rt4831-backlight: Convert to platform remove callback returning void
  backlight: qcom-wled: Convert to platform remove callback returning void
  backlight: pwm_bl: Convert to platform remove callback returning void
  backlight: mt6370-backlight: Convert to platform remove callback returning void
  backlight: lp8788_bl: Convert to platform remove callback returning void
  backlight: lm3533_bl: Convert to platform remove callback returning void
  backlight: led_bl: Convert to platform remove callback returning void
  backlight: hp680_bl: Convert to platform remove callback returning void
  backlight: da9052_bl: Convert to platform remove callback returning void
  backlight: cr_bllcd: Convert to platform remove callback returning void
  backlight: adp5520_bl: Convert to platform remove callback returning void
  backlight: aat2870_bl: Convert to platform remove callback returning void
  backlight: qcom-wled: Add PMI8950 compatible

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add support for  Renesas RZ/G2L MTU3

  New Device Support:
   - Add support for Lenovo Yoga Book X90F to Intel CHT WC
   - Add support for MAX5970 and MAX5978 to Simple MFD (I2C)
   - Add support for Meteor Lake PCH-S LPSS PCI to Intel LPSS PCI
   - Add support for AXP15060 PMIC to X-Powers PMIC collection

  Remove Device Support:
   - Remove support for Samsung 5M8751 and S5M8763 PMIC devices

  New Functionality:
   - Convert deprecated QCOM IRQ Chip to config registers
   - Add support for 32-bit address spaces to Renesas SMUs

  Fix-ups:
   - Make use of APIs / MACROs designed to simplify and demystify
   - Add / improve Device Tree bindings
   - Memory saving struct layout optimisations
   - Remove old / deprecated functionality
   - Factor out unassigned register addresses from ranges
   - Trivial: Spelling fixes, renames and coding style fixes
   - Rid 'defined but not used' warnings
   - Remove ineffective casts and pointer stubs

  Bug Fixes:
   - Fix incorrectly non-inverted mask/unmask IRQs on QCOM platforms
   - Remove MODULE_*() helpers from non-tristate drivers
   - Do not attempt to use out-of-range memory addresses associated with io_base
   - Provide missing export helpers
   - Fix remap bulk read optimisation fallout
   - Fix memory leak issues in error paths"

* tag 'mfd-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (88 commits)
  dt-bindings: mfd: ti,j721e-system-controller: Add SoC chip ID
  leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver
  dt-bindings: mfd: qcom,spmi-pmic: Document flash LED controller
  dt-bindings: mfd: x-powers,axp152: Document the AXP15060 variant
  mfd: axp20x: Add support for AXP15060 PMIC
  dt-bindings: mfd: x-powers,axp152: Document the AXP313a variant
  counter: rz-mtu3-cnt: Unlock on error in rz_mtu3_count_ceiling_write()
  dt-bindings: mfd: dlg,da9063: Document voltage monitoring
  dt-bindings: mfd: stm32: Remove unnecessary blank lines
  dt-bindings: mfd: qcom,spmi-pmic: Use generic ADC node name in examples
  dt-bindings: mfd: syscon: Add nuvoton,ma35d1-sys compatible
  MAINTAINERS: Add entries for Renesas RZ/G2L MTU3a counter driver
  counter: Add Renesas RZ/G2L MTU3a counter driver
  Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select
  mfd: Add Renesas RZ/G2L MTU3a core driver
  dt-bindings: timer: Document RZ/G2L MTU3a bindings
  mfd: rsmu_i2c: Convert to i2c's .probe_new() again
  mfd: intel-lpss: Add Intel Meteor Lake PCH-S LPSS PCI IDs
  mfd: dln2: Fix memory leak in dln2_probe()
  mfd: axp20x: Fix axp288 writable-ranges
  ...

Pull LED updates from Lee Jones:
 "New Drivers:
   - Add support for MediaTek MT6370 LED Indicator
   - Add support for MediaTek MT6370 Flashlight
   - Add support for QCOM PMIC Flash
   - Add support for Rohm BD2606MVV Charge Pump LED

  New Device Support:
   - Add support for PMK8550 PWM to QCOM LPG

  New Functionality:
   - Add support for high resolution PWM to QCOM LPG

  Fix-ups:
   - Kconfig 'depends' and 'select' dependency changes
   - Remove unused / irrelevant includes
   - Remove unnecessary checks (already performed further into the call stack)
   - Trivial: Fix commentary, simplify error messages
   - Rid 'defined but not used' warnings
   - Provide documentation
   - Explicitly provide include files

  Bug Fixes:
   - Mark GPIO LED as BROKEN
   - Fix Kconfig entries
   - Fix various Smatch staticify reports
   - Fix error handling (or a lack there of)"

* tag 'leds-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (30 commits)
  leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver
  dt-bindings: leds: Add ROHM BD2606MVV LED
  docs: leds: ledtrig-oneshot: Fix spelling mistake
  leds: pwm-multicolor: Simplify an error message
  dt-bindings: leds: Convert PCA9532 to dtschema
  leds: rgb: leds-qcom-lpg: Add support for PMK8550 PWM
  leds: rgb: leds-qcom-lpg: Add support for high resolution PWM
  dt-bindings: leds-qcom-lpg: Add qcom,pmk8550-pwm compatible string
  leds: tca6507: Fix error handling of using fwnode_property_read_string
  leds: flash: Set variables mvflash_{3,4}ch_regs storage-class-specifier to static
  leds: rgb: mt6370: Correct config name to select in LEDS_MT6370_RGB
  MAINTAINERS: Add entry for LED devices documentation
  Documentation: leds: MT6370: Use bullet lists for timing variables
  Documentation: leds: mt6370: Properly wrap hw_pattern chart
  Documentation: leds: Add MT6370 doc to the toctree
  leds: rgb: mt6370: Fix implicit declaration for FIELD_GET
  docs: leds: Add MT6370 RGB LED pattern document
  leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  dt-bindings: leds: spmi-flash-led: Add pm6150l compatible
  ...

afs_read_dir fetches an amount of data that's based on what the inode
size is thought to be.  If the file on the server is larger than what
was fetched, the code rechecks i_size and retries.  If the local i_size
was not properly updated, this can lead to an endless loop of fetching
i_size from the server and noticing each time that the size is larger on
the server.

If it is known that the remote size is larger than i_size, bump up the
fetch size to that size.

Fixes: f3ddee8d ("afs: Fix directory handling")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org

Fix afs_getattr() to report the server's idea of the file size of a
directory rather than the local size.  The local size may differ as we edit
the local copy to avoid having to redownload it and we may end up with a
differently structured blob of a different size.

However, if the directory is discarded from the pagecache we then download
it again and the user may see the directory file size apparently change.

Fixes: 63a4681f ("afs: Locally edit directory data for mkdir/create/unlink/...")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org

If the data version returned from the server is larger than expected,
the local data is invalidated, but we may still want to note the remote
file size.

Since we're setting change_size, we have to also set data_changed
for the i_size to get updated.

Fixes: 3f4aa981 ("afs: Fix EOF corruption")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org

Pull input updates from Dmitry Torokhov:

 - a new driver for Novatek touch controllers

 - a new driver for power button for NXP BBNSM

 - a skeleton KUnit tests for the input core

 - improvements to Xpad game controller driver to support more devices

 - improvements to edt-ft5x06, hideep and other drivers

* tag 'input-for-v6.4-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (42 commits)
  Revert "Input: xpad - fix support for some third-party controllers"
  dt-bindings: input: pwm-beeper: convert to dt schema
  Input: xpad - fix PowerA EnWired Controller guide button
  Input: xpad - add constants for GIP interface numbers
  Input: synaptics-rmi4 - fix function name in kerneldoc
  Input: raspberrypi-ts - fix refcount leak in rpi_ts_probe
  Input: edt-ft5x06 - select REGMAP_I2C
  Input: melfas_mip4 - report palm touches
  Input: cma3000_d0x - remove unneeded code
  Input: edt-ft5x06 - calculate points data length only once
  Input: edt-ft5x06 - unify the crc check
  Input: edt-ft5x06 - convert to use regmap API
  Input: edt-ft5x06 - don't print error messages with dev_dbg()
  Input: edt-ft5x06 - remove code duplication
  Input: edt-ft5x06 - don't recalculate the CRC
  Input: edt-ft5x06 - add spaces to ensure format specification
  Input: edt-ft5x06 - remove unnecessary blank lines
  Input: edt-ft5x06 - fix indentation
  Input: tsc2007 - enable cansleep pendown GPIO
  Input: Add KUnit tests for some of the input core helper functions
  ...

Prepare input updates for 6.4 merge window.

This reverts commit db7220c4 because it
causes crashes when trying to dereference xpad->dev->dev in xpad_probe()
which has not been set up yet.

Reported-by: syzbot+a3f758b8d8cb7e49afec@syzkaller.appspotmail.com
Reported-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://groups.google.com/g/syzkaller-bugs/c/iMhTgpGuIbMSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull kvm updates from Paolo Bonzini:
 "s390:

   - More phys_to_virt conversions

   - Improvement of AP management for VSIE (nested virtualization)

  ARM64:

   - Numerous fixes for the pathological lock inversion issue that
     plagued KVM/arm64 since... forever.

   - New framework allowing SMCCC-compliant hypercalls to be forwarded
     to userspace, hopefully paving the way for some more features being
     moved to VMMs rather than be implemented in the kernel.

   - Large rework of the timer code to allow a VM-wide offset to be
     applied to both virtual and physical counters as well as a
     per-timer, per-vcpu offset that complements the global one. This
     last part allows the NV timer code to be implemented on top.

   - A small set of fixes to make sure that we don't change anything
     affecting the EL1&0 translation regime just after having having
     taken an exception to EL2 until we have executed a DSB. This
     ensures that speculative walks started in EL1&0 have completed.

   - The usual selftest fixes and improvements.

  x86:

   - Optimize CR0.WP toggling by avoiding an MMU reload when TDP is
     enabled, and by giving the guest control of CR0.WP when EPT is
     enabled on VMX (VMX-only because SVM doesn't support per-bit
     controls)

   - Add CR0/CR4 helpers to query single bits, and clean up related code
     where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long"
     return as a bool

   - Move AMD_PSFD to cpufeatures.h and purge KVM's definition

   - Avoid unnecessary writes+flushes when the guest is only adding new
     PTEs

   - Overhaul .sync_page() and .invlpg() to utilize .sync_page()'s
     optimizations when emulating invalidations

   - Clean up the range-based flushing APIs

   - Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a
     single A/D bit using a LOCK AND instead of XCHG, and skip all of
     the "handle changed SPTE" overhead associated with writing the
     entire entry

   - Track the number of "tail" entries in a pte_list_desc to avoid
     having to walk (potentially) all descriptors during insertion and
     deletion, which gets quite expensive if the guest is spamming
     fork()

   - Disallow virtualizing legacy LBRs if architectural LBRs are
     available, the two are mutually exclusive in hardware

   - Disallow writes to immutable feature MSRs (notably
     PERF_CAPABILITIES) after KVM_RUN, similar to CPUID features

   - Overhaul the vmx_pmu_caps selftest to better validate
     PERF_CAPABILITIES

   - Apply PMU filters to emulated events and add test coverage to the
     pmu_event_filter selftest

   - AMD SVM:
       - Add support for virtual NMIs
       - Fixes for edge cases related to virtual interrupts

   - Intel AMX:
       - Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if
         XTILE_DATA is not being reported due to userspace not opting in
         via prctl()
       - Fix a bug in emulation of ENCLS in compatibility mode
       - Allow emulation of NOP and PAUSE for L2
       - AMX selftests improvements
       - Misc cleanups

  MIPS:

   - Constify MIPS's internal callbacks (a leftover from the hardware
     enabling rework that landed in 6.3)

  Generic:

   - Drop unnecessary casts from "void *" throughout kvm_main.c

   - Tweak the layout of "struct kvm_mmu_memory_cache" to shrink the
     struct size by 8 bytes on 64-bit kernels by utilizing a padding
     hole

  Documentation:

   - Fix goof introduced by the conversion to rST"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (211 commits)
  KVM: s390: pci: fix virtual-physical confusion on module unload/load
  KVM: s390: vsie: clarifications on setting the APCB
  KVM: s390: interrupt: fix virtual-physical confusion for next alert GISA
  KVM: arm64: Have kvm_psci_vcpu_on() use WRITE_ONCE() to update mp_state
  KVM: arm64: Acquire mp_state_lock in kvm_arch_vcpu_ioctl_vcpu_init()
  KVM: selftests: Test the PMU event "Instructions retired"
  KVM: selftests: Copy full counter values from guest in PMU event filter test
  KVM: selftests: Use error codes to signal errors in PMU event filter test
  KVM: selftests: Print detailed info in PMU event filter asserts
  KVM: selftests: Add helpers for PMC asserts in PMU event filter test
  KVM: selftests: Add a common helper for the PMU event filter guest code
  KVM: selftests: Fix spelling mistake "perrmited" -> "permitted"
  KVM: arm64: vhe: Drop extra isb() on guest exit
  KVM: arm64: vhe: Synchronise with page table walker on MMU update
  KVM: arm64: pkvm: Document the side effects of kvm_flush_dcache_to_poc()
  KVM: arm64: nvhe: Synchronise with page table walker on TLBI
  KVM: arm64: Handle 32bit CNTPCTSS traps
  KVM: arm64: nvhe: Synchronise with page table walker on vcpu run
  KVM: arm64: vgic: Don't acquire its_lock before config_lock
  KVM: selftests: Add test to verify KVM's supported XCR0
  ...

Pull OpenRISC updates from Stafford Horne:
 "Two things for OpenRISC this cycle:

   - Small cleanup for device tree cpu iteration from Rob Herring

   - Add support for storing, restoring and accessing user space FPU
     state, to allow for libc to support the FPU on OpenRISC"

* tag 'for-linus' of https://github.com/openrisc/linux:
  openrisc: Add floating point regset
  openrisc: Support floating point user api
  openrisc: Support storing and restoring fpu state
  openrisc: Properly store r31 to pt_regs on unhandled exceptions
  openrisc: Use common of_get_cpu_node() instead of open-coding

Pull RTC updates from Alexandre Belloni:
 "Not much this cycle, there is the conversion to remove_new and many
  small fixes in drivers:

  Subsystem:
   - Convert to platform remove callback returning void

  Drivers:
   - meson-vrtc: fix a firmware display issue"

* tag 'rtc-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (53 commits)
  rtc: armada38x: use devm_platform_ioremap_resource_byname()
  rtc: sunplus: use devm_platform_ioremap_resource_byname()
  rtc: jz4740: Make sure clock provider gets removed
  rtc: k3: handle errors while enabling wake irq
  rtc: meson-vrtc: Use ktime_get_real_ts64() to get the current time
  dt-bindings: rtc: Drop unneeded quotes
  rtc: pcf8523: remove unnecessary OR operation
  rtc: pcf8523: fix coding-style issues
  rtc: ds1390: mark OF related data as maybe unused
  rtc: omap: include header for omap_rtc_power_off_program prototype
  rtc: sun6i: Use of_property_present() for testing DT property presence
  rtc: mpfs: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIRE
  rtc: zynqmp: Convert to platform remove callback returning void
  rtc: xgene: Convert to platform remove callback returning void
  rtc: wm8350: Convert to platform remove callback returning void
  rtc: vt8500: Convert to platform remove callback returning void
  rtc: twl: Convert to platform remove callback returning void
  rtc: tps6586x: Convert to platform remove callback returning void
  rtc: tegra: Convert to platform remove callback returning void
  rtc: sunplus: Convert to platform remove callback returning void
  ...

Pull i3c updates from Alexandre Belloni:
 "Subsystem:
   - OF alias bus numbering
   - convert to platform remove callback returning void

  New driver:
   - AST2600 controller, based on Synopsys DesignWare IP

  Driver update:
   - dw: add infrastructure to support different platform integrations"

* tag 'i3c/for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: ast2600: set variable ast2600_i3c_ops storage-class-specifier to static
  i3c: ast2600: fix register setting for 545 ohm pullups
  i3c: ast2600: enable IBI support
  i3c: dw: Add a platform facility for IBI PEC workarounds
  i3c: dw: Add support for in-band interrupts
  i3c: dw: Turn DAT array entry into a struct
  i3c: dw: Create a generic fifo read function
  i3c: Allow OF-alias-based persistent bus numbering
  i3c: ast2600: Add AST2600 platform-specific driver
  dt-bindings: i3c: Add AST2600 i3c controller
  i3c: dw: Add infrastructure for platform-specific implementations
  i3c: dw: use bus mode rather than device reg for conditional tCAS setting
  i3c: dw: Return the length from a read priv_xfer
  i3c: svc: Convert to platform remove callback returning void
  i3c: mipi-i3c-hci: Convert to platform remove callback returning void
  i3c: cdns: Convert to platform remove callback returning void
  i3c: dw: Convert to platform remove callback returning void
  i3c: Make i3c_master_unregister() return void
  i3c: dw: drop of_match_ptr for ID table
  i3c: Correct reference to the I²C device data type

Pull ext4 fixes from Ted Ts'o:
 "Some ext4 regression and bug fixes"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: clean up error handling in __ext4_fill_super()
  ext4: reflect error codes from ext4_multi_mount_protect() to its callers
  ext4: fix lost error code reporting in __ext4_fill_super()
  ext4: fix unused iterator variable warnings
  ext4: fix use-after-free read in ext4_find_extent for bigalloc + inline
  ext4: fix i_disksize exceeding i_size problem in paritally written case

Pull cifs fixes from Steve French:

 - deferred close fix for an important case when cached file should be
   closed immediately

 - two fixes for missing locks

 - eight minor cleanup

* tag '6.4-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number for cifs.ko
  smb3: move some common open context structs to smbfs_common
  smb3: make query_on_disk_id open context consistent and move to common code
  SMB3.1.1: add new tree connect ShareFlags
  cifs: missing lock when updating session status
  SMB3: Close deferred file handles in case of handle lease break
  SMB3: Add missing locks to protect deferred close file list
  cifs: Avoid a cast in add_lease_context()
  cifs: Simplify SMB2_open_init()
  cifs: Simplify SMB2_open_init()
  cifs: Simplify SMB2_open_init()

Merge tag 'tpmdd-v6.4-rc1-fix-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd

Pull tpm fix from Jarkko Sakkinen:
 "This fixes a critical bug in my first pull request.

  I fixed the cherry pick issue and tested with real hardare and
  libvirt/qemu plus swtpm"

* tag 'tpmdd-v6.4-rc1-fix-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm: Re-enable TPM chip boostrapping non-tpm_tis TPM drivers

smatch reports
drivers/i3c/master/ast2600-i3c-master.c:121:34: warning: symbol
  'ast2600_i3c_ops' was not declared. Should it be static?

This variable is only used in its defining file, so it should be static.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20230429134601.2688558-1-trix@redhat.comSigned-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Pull iommu updates from Joerg Roedel:

 - Convert to platform remove callback returning void

 - Extend changing default domain to normal group

 - Intel VT-d updates:
     - Remove VT-d virtual command interface and IOASID
     - Allow the VT-d driver to support non-PRI IOPF
     - Remove PASID supervisor request support
     - Various small and misc cleanups

 - ARM SMMU updates:
     - Device-tree binding updates:
         * Allow Qualcomm GPU SMMUs to accept relevant clock properties
         * Document Qualcomm 8550 SoC as implementing an MMU-500
         * Favour new "qcom,smmu-500" binding for Adreno SMMUs

     - Fix S2CR quirk detection on non-architectural Qualcomm SMMU
       implementations

     - Acknowledge SMMUv3 PRI queue overflow when consuming events

     - Document (in a comment) why ATS is disabled for bypass streams

 - AMD IOMMU updates:
     - 5-level page-table support
     - NUMA awareness for memory allocations

 - Unisoc driver: Support for reattaching an existing domain

 - Rockchip driver: Add missing set_platform_dma_ops callback

 - Mediatek driver: Adjust the dma-ranges

 - Various other small fixes and cleanups

* tag 'iommu-updates-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (82 commits)
  iommu: Remove iommu_group_get_by_id()
  iommu: Make iommu_release_device() static
  iommu/vt-d: Remove BUG_ON in dmar_insert_dev_scope()
  iommu/vt-d: Remove a useless BUG_ON(dev->is_virtfn)
  iommu/vt-d: Remove BUG_ON in map/unmap()
  iommu/vt-d: Remove BUG_ON when domain->pgd is NULL
  iommu/vt-d: Remove BUG_ON in handling iotlb cache invalidation
  iommu/vt-d: Remove BUG_ON on checking valid pfn range
  iommu/vt-d: Make size of operands same in bitwise operations
  iommu/vt-d: Remove PASID supervisor request support
  iommu/vt-d: Use non-privileged mode for all PASIDs
  iommu/vt-d: Remove extern from function prototypes
  iommu/vt-d: Do not use GFP_ATOMIC when not needed
  iommu/vt-d: Remove unnecessary checks in iopf disabling path
  iommu/vt-d: Move PRI handling to IOPF feature path
  iommu/vt-d: Move pfsid and ats_qdep calculation to device probe path
  iommu/vt-d: Move iopf code from SVA to IOPF enabling path
  iommu/vt-d: Allow SVA with device-specific IOPF
  dmaengine: idxd: Add enable/disable device IOPF feature
  arm64: dts: mt8186: Add dma-ranges for the parent "soc" node
  ...

Pull compute express link updates from Dan Williams:
 "DOE support is promoted from drivers/cxl/ to drivers/pci/ with Bjorn's
  blessing, and the CXL core continues to mature its media management
  capabilities with support for listing and injecting media errors. Some
  late fixes that missed v6.3-final are also included:

   - Refactor the DOE infrastructure (Data Object Exchange
     PCI-config-cycle mailbox) to be a facility of the PCI core rather
     than the CXL core.

     This is foundational for upcoming support for PCI
     device-attestation and PCIe / CXL link encryption.

   - Add support for retrieving and injecting poison for CXL memory
     expanders.

     This enabling uses trace-events to convey CXL media error records
     to user tooling. It includes translation of device-local addresses
     (DPA) to system physical addresses (SPA) and their corresponding
     CXL region.

   - Fixes for decoder enumeration that missed v6.3-final

   - Miscellaneous fixups"

* tag 'cxl-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (38 commits)
  cxl/test: Add mock test for set_timestamp
  cxl/mbox: Update CMD_RC_TABLE
  tools/testing/cxl: Require CONFIG_DEBUG_FS
  tools/testing/cxl: Add a sysfs attr to test poison inject limits
  tools/testing/cxl: Use injected poison for get poison list
  tools/testing/cxl: Mock the Clear Poison mailbox command
  tools/testing/cxl: Mock the Inject Poison mailbox command
  cxl/mem: Add debugfs attributes for poison inject and clear
  cxl/memdev: Trace inject and clear poison as cxl_poison events
  cxl/memdev: Warn of poison inject or clear to a mapped region
  cxl/memdev: Add support for the Clear Poison mailbox command
  cxl/memdev: Add support for the Inject Poison mailbox command
  tools/testing/cxl: Mock support for Get Poison List
  cxl/trace: Add an HPA to cxl_poison trace events
  cxl/region: Provide region info to the cxl_poison trace event
  cxl/memdev: Add trigger_poison_list sysfs attribute
  cxl/trace: Add TRACE support for CXL media-error records
  cxl/mbox: Add GET_POISON_LIST mailbox command
  cxl/mbox: Initialize the poison state
  cxl/mbox: Restrict poison cmds to debugfs cxl_raw_allow_all
  ...