- 10 Aug, 2024 5 commits
-
-
Nick Child authored
Use the header length helper functions rather than trying to calculate it within the driver. There are defined functions for mac and network headers (skb_mac_header_len and skb_network_header_len) but no such function exists for the transport header length. Also, hdr_data was memset during allocation to all 0's so no need to memset again. Signed-off-by:
Nick Child <nnac123@linux.ibm.com> Link: https://patch.msgid.link/20240807211809.1259563-3-nnac123@linux.ibm.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Nick Child authored
Previously, the driver would replenish the rx pool if the polling function consumed less than the budget. The logic being that the driver did not exhaust its budget so that must mean that the driver is not busy and has cycles to spare for replenishing the pool. So pool replenishment happens on every poll which did not consume the budget. This can very costly during request-response tests. In fact, an extra ~100pps can be seen in TCP_RR_150 tests when we remove this conditional. Trace results (ftrace, graph-time=1) for the poll function are below: Previous results: ibmvnic_poll = 64951846.0 us / 4167628.0 hits = AVG 15.58 replenish_rx_pool = 17602846.0 us / 4710437.0 hits = AVG 3.74 Now: ibmvnic_poll = 57673941.0 us / 4791737.0 hits = AVG 12.04 replenish_rx_pool = 3938171.6 us / 4314.0 hits = AVG 912.88 While the replenish function takes longer, it is hit less frequently meaning the ibmvnic_poll function, on average, is faster. Furthermore, this change does not have a negative effect on performance bandwidth/latency measurements. Signed-off-by: -
Christophe Leroy authored
Building fs_enet on powerpc e500 leads to following warning: CC drivers/net/ethernet/freescale/fs_enet/mac-scc.o In file included from ./include/linux/build_bug.h:5, from ./include/linux/container_of.h:5, from ./include/linux/list.h:5, from ./include/linux/module.h:12, from drivers/net/ethernet/freescale/fs_enet/mac-scc.c:15: drivers/net/ethernet/freescale/fs_enet/mac-scc.c: In function 'allocate_bd': ./include/linux/err.h:28:49: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 28 | #define IS_ERR_VALUE(x) unlikely((unsigned long)(void *)(x) >= (unsigned long)-MAX_ERRNO) | ^ ./include/linux/compiler.h:77:45: note: in definition of macro 'unlikely' 77 | # define unlikely(x) __builtin_expect(!!(x), 0) | ^ drivers/net/ethernet/freescale/fs_enet/mac-scc.c:138:13: note: in expansion of macro 'IS_ERR_VALUE' 138 | if (IS_ERR_VALUE(fep->ring_mem_addr)) | ^~~~~~~~~~~~ This is due to fep->ring_mem_addr not being a pointer but a DMA address which is 64 bits on that platform while pointers are 32 bits as this is a 32 bits platform with wider physical bus. However, using fep->ring_mem_addr is just wrong because cpm_muram_alloc() returns an offset within the muram and not a physical address directly. So use fpi->dpram_offset instead. Signed-off-by:Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/ec67ea3a3bef7e58b8dc959f7c17d405af0d27e4.1723101144.git.christophe.leroy@csgroup.euSigned-off-by:
-
zhangxiangqian authored
The usbnet_link_change function is not called, if the link has not changed. ... [16913.807393][ 3] cdc_ether 1-2:2.0 enx00e0995fd1ac: kevent 12 may have been dropped [16913.822266][ 2] cdc_ether 1-2:2.0 enx00e0995fd1ac: kevent 12 may have been dropped [16913.826296][ 2] cdc_ether 1-2:2.0 enx00e0995fd1ac: kevent 11 may have been dropped ... kevent 11 is scheduled too frequently and may affect other event schedules. Signed-off-by:
zhangxiangqian <zhangxiangqian@kylinos.cn> Acked-by:
Oliver Neukum <oneukum@suse.com> Link: https://patch.msgid.link/1723109985-11996-1-git-send-email-zhangxiangqian@kylinos.cnSigned-off-by:
-
Mina Almasry authored
Currently ethtool_set_channel calls separate functions to check whether the new channel number violates rss configuration or flow steering configuration. Very soon we need to check whether the new channel number violates memory provider configuration as well. To do all 3 checks cleanly, add a wrapper around ethtool_get_max_rxnfc_channel() and ethtool_get_max_rxfh_channel(), which does both checks. We can later extend this wrapper to add the memory provider check in one place. Note that in the current code, we put a descriptive genl error message when we run into issues. To preserve the error message, we pass the genl_info* to the common helper. The ioctl calls can pass NULL instead. Suggested-by:
Mina Almasry <almasrymina@google.com> Link: https://patch.msgid.link/20240808205345.2141858-1-almasrymina@google.comSigned-off-by:
-
- 09 Aug, 2024 11 commits
-
-
David S. Miller authored
Allison Henderson says: ==================== selftests: rds selftest This series is a new selftest that Vegard, Chuck and myself have been working on to provide some test coverage for rds. I've modified the scripts to include the feedback from the last version, but let me know if there's anything missed. Questions and comments appreciated. Thanks everyone! Allison Changes in v2: - Removed qemu vm creation and related code - Updated README.txt with examples of running the test with virtme - Removed init.sh. run.sh now directly calls test.py - Some clean up done with the return code handling since there is no vm between the scripts anymore - Imported ip python function in tools/testing/selftests/net/lib/py/utils.py into test.py - Adapted test.py to use the imported ip function, and removed the local ip wrapper - Some line wrap clean up - Link to v1: https://lore.kernel.org/netdev/20240626012834.5678-3-allison.henderson@oracle.com/T ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vegard Nossum authored
This adds some basic self-testing infrastructure for RDS-TCP. Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
Allison Henderson <allison.henderson@oracle.com> Signed-off-by:
-
Vegard Nossum authored
To better our unit tests we need code coverage to be part of the kernel. This patch borrows heavily from how CONFIG_GCOV_PROFILE_FTRACE is implemented Reviewed-by:
-
Vegard Nossum authored
These files contain the runtime coverage data generated by gcov. Signed-off-by:
-
Simon Horman authored
Jiri Slaby advises me that the preferred mechanism for declaring string constants is static char arrays, so use that here. This mostly reverts commit 1692b977 ("net: stmmac: xgmac: use #define for string constants") That commit was a fix for commit 46eba193 ("net: stmmac: xgmac: fix handling of DPP safety error for DMA channels"). The fix being replacing const char * with #defines in order to address compilation failures observed on GCC 6 through 10. Compile tested only. No functional change intended. Suggested-by:
Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/netdev/485dbc5a-a04b-40c2-9481-955eaa5ce2e2@kernel.org/Signed-off-by:
-
Pawel Dembicki authored
This commit changes magic numbers in phy operations. Some shifted registers was replaced with bitfield macros. No functional changes done. Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by:
Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by:
-
Matthias Schiffer authored
Allow of_find_net_device_by_node() to find icssg_prueth ports and make the individual ports' of_nodes available in sysfs. Signed-off-by:
Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reviewed-by:
MD Danish Anwar <danishanwar@ti.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240807121215.3178964-1-matthias.schiffer@ew.tq-group.comSigned-off-by:
-
Christophe JAILLET authored
'struct mii_phy_def' are not modified in this driver. Constifying these structures moves some data to a read-only section, so increase overall security. While at it fix the checkpatch warning related to this patch (some missing newlines and spaces around *) On a x86_64, with allmodconfig: Before: ====== 27709 928 0 28637 6fdd drivers/net/sungem_phy.o After: ===== text data bss dec hex filename 28157 476 0 28633 6fd9 drivers/net/sungem_phy.o Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
-
Edward Cree authored
A value of 1 doesn't make sense, as it implies the only allowed context ID is 0, which is reserved for the default context - in which case the driver should just not claim to support custom RSS contexts at all. Suggested-by:
Edward Cree <ecree.xilinx@gmail.com> Link: https://lore.kernel.org/c07725b3a3d0b0a63b85e230f9c77af59d4d07f8.1723045898.git.ecree.xilinx@gmail.comSigned-off-by:
-
Rosen Penev authored
Allows simplifying get_strings and avoids manual pointer manipulation. Signed-off-by:
Rosen Penev <rosenp@gmail.com> Reviewed-by:
Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20240807190303.6143-1-rosenp@gmail.comSigned-off-by:
-
Simon Horman authored
Provide declaration of dmae_reg_go_c in header. This symbol is defined in bnx2x_main.c. And used in that file and bnx2x_stats.c. However, Sparse complains that there is no declaration of the symbol in dmae_reg_go_c nor is the symbol static. .../bnx2x_main.c:291:11: warning: symbol 'dmae_reg_go_c' was not declared. Should it be static? Address this by moving the declaration from bnx2x_stats.c to bnx2x_reg.h. No functional change intended. Compile tested only. Signed-off-by:
-
- 08 Aug, 2024 24 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
Cross-merge networking fixes after downstream PR. No conflicts or adjacent changes. Link: https://patch.msgid.link/20240808170148.3629934-1-kuba@kernel.orgSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth. Current release - regressions: - eth: bnxt_en: fix memory out-of-bounds in bnxt_fill_hw_rss_tbl() on older chips Current release - new code bugs: - ethtool: fix off-by-one error / kdoc contradicting the code for max RSS context IDs - Bluetooth: hci_qca: - QCA6390: fix support on non-DT platforms - QCA6390: don't call pwrseq_power_off() twice - fix a NULL-pointer derefence at shutdown - eth: ice: fix incorrect assigns of FEC counters Previous releases - regressions: - mptcp: fix handling endpoints with both 'signal' and 'subflow' flags set - virtio-net: fix changing ring count when vq IRQ coalescing not supported - eth: gve: fix use of netif_carrier_ok() during reconfig / reset Previous releases - always broken: - eth: idpf: fix bugs in queue re-allocation on reconfig / reset - ethtool: fix context creation with no parameters Misc: - linkwatch: use system_unbound_wq to ease RTNL contention" * tag 'net-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (41 commits) net: dsa: microchip: disable EEE for KSZ8567/KSZ9567/KSZ9896/KSZ9897. ethtool: Fix context creation with no parameters net: ethtool: fix off-by-one error in max RSS context IDs net: pse-pd: tps23881: include missing bitfield.h header net: fec: Stop PPS on driver remove net: bcmgenet: Properly overlay PHY and MAC Wake-on-LAN capabilities l2tp: fix lockdep splat net: stmmac: dwmac4: fix PCS duplex mode decode idpf: fix UAFs when destroying the queues idpf: fix memleak in vport interrupt configuration idpf: fix memory leaks and crashes while performing a soft reset bnxt_en : Fix memory out-of-bounds in bnxt_fill_hw_rss_tbl() net: dsa: bcm_sf2: Fix a possible memory leak in bcm_sf2_mdio_register() net/smc: add the max value of fallback reason count Bluetooth: hci_sync: avoid dup filtering when passive scanning with adv monitor Bluetooth: l2cap: always unlock channel in l2cap_conless_channel() Bluetooth: hci_qca: fix a NULL-pointer derefence at shutdown Bluetooth: hci_qca: fix QCA6390 support on non-DT platforms Bluetooth: hci_qca: don't call pwrseq_power_off() twice for QCA6390 ice: Fix incorrect assigns of FEC counts ... -
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: - Have reading of event format files test if the metadata still exists. When a event is freed, a flag (EVENT_FILE_FL_FREED) in the metadata is set to state that it is to prevent any new references to it from happening while waiting for existing references to close. When the last reference closes, the metadata is freed. But the "format" was missing a check to this flag (along with some other files) that allowed new references to happen, and a use-after-free bug to occur. - Have the trace event meta data use the refcount infrastructure instead of relying on its own atomic counters. - Have tracefs inodes use alloc_inode_sb() for allocation instead of using kmem_cache_alloc() directly. - Have eventfs_create_dir() return an ERR_PTR instead of NULL as the callers expect a real object or an ERR_PTR. - Have release_ei() use call_srcu() and not call_rcu() as all the protection is on SRCU and not RCU. - Fix ftrace_graph_ret_addr() to use the task passed in and not current. - Fix overflow bug in get_free_elt() where the counter can overflow the integer and cause an infinite loop. - Remove unused function ring_buffer_nr_pages() - Have tracefs freeing use the inode RCU infrastructure instead of creating its own. When the kernel had randomize structure fields enabled, the rcu field of the tracefs_inode was overlapping the rcu field of the inode structure, and corrupting it. Instead, use the destroy_inode() callback to do the initial cleanup of the code, and then have free_inode() free it. * tag 'trace-v6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracefs: Use generic inode RCU for synchronizing freeing ring-buffer: Remove unused function ring_buffer_nr_pages() tracing: Fix overflow in get_free_elt() function_graph: Fix the ret_stack used by ftrace_graph_ret_addr() eventfs: Use SRCU for freeing eventfs_inodes eventfs: Don't return NULL in eventfs_create_dir() tracefs: Fix inode allocation tracing: Use refcount for trace_event_file reference counter tracing: Have format file honor EVENT_FILE_FL_FREED
-
git://evilpiepirate.org/bcachefsLinus Torvalds authored
Pull bcachefs fixes from Kent Overstreet: "Assorted little stuff: - lockdep fixup for lockdep_set_notrack_class() - we can now remove a device when using erasure coding without deadlocking, though we still hit other issues - the 'allocator stuck' timeout is now configurable, and messages are ratelimited. The default timeout has been increased from 10 seconds to 30" * tag 'bcachefs-2024-08-08' of git://evilpiepirate.org/bcachefs: bcachefs: Use bch2_wait_on_allocator() in btree node alloc path bcachefs: Make allocator stuck timeout configurable, ratelimit messages bcachefs: Add missing path_traverse() to btree_iter_next_node() bcachefs: ec should not allocate from ro devs bcachefs: Improved allocator debugging for ec bcachefs: Add missing bch2_trans_begin() call bcachefs: Add a comment for bucket helper types bcachefs: Don't rely on implicit unsigned -> signed integer conversion lockdep: Fix lockdep_set_notrack_class() for CONFIG_LOCK_STAT bcachefs: Fix double free of ca->buckets_nouse -
Linus Torvalds authored
Russell King reported that the arm cbc(aes) crypto module hangs when loaded, and Herbert Xu bisected it to commit 9b9879fc ("modules: catch concurrent module loads, treat them as idempotent"), and noted: "So what's happening here is that the first modprobe tries to load a fallback CBC implementation, in doing so it triggers a load of the exact same module due to module aliases. IOW we're loading aes-arm-bs which provides cbc(aes). However, this needs a fallback of cbc(aes) to operate, which is made out of the generic cbc module + any implementation of aes, or ecb(aes). The latter happens to also be provided by aes-arm-cb so that's why it tries to load the same module again" So loading the aes-arm-bs module ends up wanting to recursively load itself, and the recursive load then ends up waiting for the original module load to complete. This is a regression, in that it used to be that we just tried to load the module multiple times, and then as we went on to install it the second time we would instead just error out because the module name already existed. That is actually also exactly what the original "catch concurrent loads" patch did in commit 9828ed3f ("module: error out early on concurrent load of the same module file"), but it turns out that it ends up being racy, in that erroring out before the module has been fully initialized will cause failures in dependent module loading. See commit ac2263b5 (which was the revert of that "error out early") commit for details about why erroring out before the module has been initialized is actually fundamentally racy. Now, for the actual recursive module load (as opposed to just concurrently loading the same module twice), the race is not an issue. At the same time it's hard for the kernel to see that this is recursion, because the module load is always done from a usermode helper, so the recursion is not some simple callchain within the kernel. End result: this is not the real fix, but this at least adds a warning for the situation (admittedly much too late for all the debugging pain that Russell and Herbert went through) and if we can come to a resolution on how to detect the recursion properly, this re-organizes the code to make that easier. Link: https://lore.kernel.org/all/ZrFHLqvFqhzykuYw@shell.armlinux.org.uk/Reported-by:
Russell King <linux@armlinux.org.uk> Debugged-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge tag 'loongarch-fixes-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Enable general EFI poweroff method to make poweroff usable on hardwares which lack ACPI S5, use accessors to page table entries instead of direct dereference to avoid potential problems, and two trivial kvm cleanups" * tag 'loongarch-fixes-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: KVM: Remove undefined a6 argument comment for kvm_hypercall() LoongArch: KVM: Remove unnecessary definition of KVM_PRIVATE_MEM_SLOTS LoongArch: Use accessors to page table entries instead of direct dereference LoongArch: Enable general EFI poweroff method
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-08-07 (ice) This series contains updates to ice driver only. Grzegorz adds IRQ synchronization call before performing reset and prevents writing to hardware when it is resetting. Mateusz swaps incorrect assignment of FEC statistics. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Fix incorrect assigns of FEC counts ice: Skip PTP HW writes during PTP reset procedure ice: Fix reset handler ==================== Link: https://patch.msgid.link/20240807224521.3819189-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Martin Whitaker authored
As noted in the device errata [1-8], EEE support is not fully operational in the KSZ8567, KSZ9477, KSZ9567, KSZ9896, and KSZ9897 devices, causing link drops when connected to another device that supports EEE. The patch series "net: add EEE support for KSZ9477 switch family" merged in commit 9b0bf4f7 caused EEE support to be enabled in these devices. A fix for this regression for the KSZ9477 alone was merged in commit 08c6d8ba. This patch extends this fix to the other affected devices. [1] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ8567R-Errata-DS80000752.pdf [2] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ8567S-Errata-DS80000753.pdf [3] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9477S-Errata-DS80000754.pdf [4] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9567R-Errata-DS80000755.pdf [5] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9567S-Errata-DS80000756.pdf [6] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9896C-Errata-DS80000757.pdf [7] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9897R-Errata-DS80000758.pdf [8] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9897S-Errata-DS80000759.pdf Fixes: 69d3b36c ("net: dsa: microchip: enable EEE support") # for KSZ8567/KSZ9567/KSZ9896/KSZ9897 Link: https://lore.kernel.org/netdev/137ce1ee-0b68-4c96-a717-c8164b514eec@martin-whitaker.me.uk/Signed-off-by:
Martin Whitaker <foss@martin-whitaker.me.uk> Acked-by:
Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Lukasz Majewski <lukma@denx.de> Link: https://patch.msgid.link/20240807205209.21464-1-foss@martin-whitaker.me.ukSigned-off-by:
-
Gal Pressman authored
The 'at least one change' requirement is not applicable for context creation, skip the check in such case. This allows a command such as 'ethtool -X eth0 context new' to work. The command works by mistake when using older versions of userspace ethtool due to an incompatibility issue where rxfh.input_xfrm is passed as zero (unset) instead of RXH_XFRM_NO_CHANGE as done with recent userspace. This patch does not try to solve the incompatibility issue. Link: https://lore.kernel.org/netdev/05ae8316-d3aa-4356-98c6-55ed4253c8a7@nvidia.com/ Fixes: 84a1d9c4 ("net: ethtool: extend RXNFC API to support RSS spreading of filter matches") Reviewed-by:
Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by:
Jianbo Liu <jianbol@nvidia.com> Signed-off-by:
Gal Pressman <gal@nvidia.com> Reviewed-by:
-
Edward Cree authored
Both ethtool_ops.rxfh_max_context_id and the default value used when it's not specified are supposed to be exclusive maxima (the former is documented as such; the latter, U32_MAX, cannot be used as an ID since it equals ETH_RXFH_CONTEXT_ALLOC), but xa_alloc() expects an inclusive maximum. Subtract one from 'limit' to produce an inclusive maximum, and pass that to xa_alloc(). Increase bnxt's max by one to prevent a (very minor) regression, as BNXT_MAX_ETH_RSS_CTX is an inclusive max. This is safe since bnxt is not actually hard-limited; BNXT_MAX_ETH_RSS_CTX is just a leftover from old driver code that managed context IDs itself. Rename rxfh_max_context_id to rxfh_max_num_contexts to make its semantics (hopefully) more obvious. Fixes: 847a8ab1 ("net: ethtool: let the core choose RSS context IDs") Signed-off-by:
-
Arnd Bergmann authored
Using FIELD_GET() fails in configurations that don't already include the header file indirectly: drivers/net/pse-pd/tps23881.c: In function 'tps23881_i2c_probe': drivers/net/pse-pd/tps23881.c:755:13: error: implicit declaration of function 'FIELD_GET' [-Wimplicit-function-declaration] 755 | if (FIELD_GET(TPS23881_REG_DEVID_MASK, ret) != TPS23881_DEVICE_ID) { | ^~~~~~~~~ Fixes: 89108cb5 ("net: pse-pd: tps23881: Fix the device ID check") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Acked-by:
-
Csókás, Bence authored
PPS was not stopped in `fec_ptp_stop()`, called when the adapter was removed. Consequentially, you couldn't safely reload the driver with the PPS signal on. Fixes: 32cba57b ("net: fec: introduce fec_ptp_stop and use in probe fail path") Reviewed-by:
Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/netdev/CAOMZO5BzcZR8PwKKwBssQq_wAGzVgf1ffwe_nhpQJjviTdxy-w@mail.gmail.com/T/#m01dcb810bfc451a492140f6797ca77443d0cb79fSigned-off-by:
Csókás, Bence <csokas.bence@prolan.hu> Reviewed-by:
Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20240807080956.2556602-1-csokas.bence@prolan.huSigned-off-by:
-
Florian Fainelli authored
Some Wake-on-LAN modes such as WAKE_FILTER may only be supported by the MAC, while others might be only supported by the PHY. Make sure that the .get_wol() returns the union of both rather than only that of the PHY if the PHY supports Wake-on-LAN. Fixes: 7e400ff3 ("net: bcmgenet: Add support for PHY-based Wake-on-LAN") Signed-off-by:
-
James Chapman authored
When l2tp tunnels use a socket provided by userspace, we can hit lockdep splats like the below when data is transmitted through another (unrelated) userspace socket which then gets routed over l2tp. This issue was previously discussed here: https://lore.kernel.org/netdev/87sfialu2n.fsf@cloudflare.com/ The solution is to have lockdep treat socket locks of l2tp tunnel sockets separately than those of standard INET sockets. To do so, use a different lockdep subclass where lock nesting is possible. ============================================ WARNING: possible recursive locking detected 6.10.0+ #34 Not tainted -------------------------------------------- iperf3/771 is trying to acquire lock: ffff8881027601d8 (slock-AF_INET/1){+.-.}-{2:2}, at: l2tp_xmit_skb+0x243/0x9d0 but task is already holding lock: ffff888102650d98 (slock-AF_INET/1){+.-.}-{2:2}, at: tcp_v4_rcv+0x1848/0x1e10 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(slock-AF_INET/1); lock(slock-AF_INET/1); *** DEADLOCK *** May be due to missing lock nesting notation 10 locks held by iperf3/771: #0: ffff888102650258 (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendmsg+0x1a/0x40 #1: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x4b/0xbc0 #2: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x17a/0x1130 #3: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: process_backlog+0x28b/0x9f0 #4: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_local_deliver_finish+0xf9/0x260 #5: ffff888102650d98 (slock-AF_INET/1){+.-.}-{2:2}, at: tcp_v4_rcv+0x1848/0x1e10 #6: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x4b/0xbc0 #7: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x17a/0x1130 #8: ffffffff822ac1e0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0xcc/0x1450 #9: ffff888101f33258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock#2){+...}-{2:2}, at: __dev_queue_xmit+0x513/0x1450 stack backtrace: CPU: 2 UID: 0 PID: 771 Comm: iperf3 Not tainted 6.10.0+ #34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x69/0xa0 dump_stack+0xc/0x20 __lock_acquire+0x135d/0x2600 ? srso_alias_return_thunk+0x5/0xfbef5 lock_acquire+0xc4/0x2a0 ? l2tp_xmit_skb+0x243/0x9d0 ? __skb_checksum+0xa3/0x540 _raw_spin_lock_nested+0x35/0x50 ? l2tp_xmit_skb+0x243/0x9d0 l2tp_xmit_skb+0x243/0x9d0 l2tp_eth_dev_xmit+0x3c/0xc0 dev_hard_start_xmit+0x11e/0x420 sch_direct_xmit+0xc3/0x640 __dev_queue_xmit+0x61c/0x1450 ? ip_finish_output2+0xf4c/0x1130 ip_finish_output2+0x6b6/0x1130 ? srso_alias_return_thunk+0x5/0xfbef5 ? __ip_finish_output+0x217/0x380 ? srso_alias_return_thunk+0x5/0xfbef5 __ip_finish_output+0x217/0x380 ip_output+0x99/0x120 __ip_queue_xmit+0xae4/0xbc0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? tcp_options_write.constprop.0+0xcb/0x3e0 ip_queue_xmit+0x34/0x40 __tcp_transmit_skb+0x1625/0x1890 __tcp_send_ack+0x1b8/0x340 tcp_send_ack+0x23/0x30 __tcp_ack_snd_check+0xa8/0x530 ? srso_alias_return_thunk+0x5/0xfbef5 tcp_rcv_established+0x412/0xd70 tcp_v4_do_rcv+0x299/0x420 tcp_v4_rcv+0x1991/0x1e10 ip_protocol_deliver_rcu+0x50/0x220 ip_local_deliver_finish+0x158/0x260 ip_local_deliver+0xc8/0xe0 ip_rcv+0xe5/0x1d0 ? __pfx_ip_rcv+0x10/0x10 __netif_receive_skb_one_core+0xce/0xe0 ? process_backlog+0x28b/0x9f0 __netif_receive_skb+0x34/0xd0 ? process_backlog+0x28b/0x9f0 process_backlog+0x2cb/0x9f0 __napi_poll.constprop.0+0x61/0x280 net_rx_action+0x332/0x670 ? srso_alias_return_thunk+0x5/0xfbef5 ? find_held_lock+0x2b/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 handle_softirqs+0xda/0x480 ? __dev_queue_xmit+0xa2c/0x1450 do_softirq+0xa1/0xd0 </IRQ> <TASK> __local_bh_enable_ip+0xc8/0xe0 ? __dev_queue_xmit+0xa2c/0x1450 __dev_queue_xmit+0xa48/0x1450 ? ip_finish_output2+0xf4c/0x1130 ip_finish_output2+0x6b6/0x1130 ? srso_alias_return_thunk+0x5/0xfbef5 ? __ip_finish_output+0x217/0x380 ? srso_alias_return_thunk+0x5/0xfbef5 __ip_finish_output+0x217/0x380 ip_output+0x99/0x120 __ip_queue_xmit+0xae4/0xbc0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? tcp_options_write.constprop.0+0xcb/0x3e0 ip_queue_xmit+0x34/0x40 __tcp_transmit_skb+0x1625/0x1890 tcp_write_xmit+0x766/0x2fb0 ? __entry_text_end+0x102ba9/0x102bad ? srso_alias_return_thunk+0x5/0xfbef5 ? __might_fault+0x74/0xc0 ? srso_alias_return_thunk+0x5/0xfbef5 __tcp_push_pending_frames+0x56/0x190 tcp_push+0x117/0x310 tcp_sendmsg_locked+0x14c1/0x1740 tcp_sendmsg+0x28/0x40 inet_sendmsg+0x5d/0x90 sock_write_iter+0x242/0x2b0 vfs_write+0x68d/0x800 ? __pfx_sock_write_iter+0x10/0x10 ksys_write+0xc8/0xf0 __x64_sys_write+0x3d/0x50 x64_sys_call+0xfaf/0x1f50 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f4d143af992 Code: c3 8b 07 85 c0 75 24 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> e9 01 cc ff ff 41 54 b8 02 00 00 0 RSP: 002b:00007ffd65032058 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f4d143af992 RDX: 0000000000000025 RSI: 00007f4d143f3bcc RDI: 0000000000000005 RBP: 00007f4d143f2b28 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f4d143f3bcc R13: 0000000000000005 R14: 0000000000000000 R15: 00007ffd650323f0 </TASK> Fixes: 0b2c5972 ("l2tp: close all race conditions in l2tp_tunnel_register()") Suggested-by:
Eric Dumazet <edumazet@google.com> Reported-by: syzbot+6acef9e0a4d1f46c83d4@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=6acef9e0a4d1f46c83d4 CC: gnault@redhat.com CC: cong.wang@bytedance.com Signed-off-by:
James Chapman <jchapman@katalix.com> Signed-off-by:
Tom Parkin <tparkin@katalix.com> Link: https://patch.msgid.link/20240806160626.1248317-1-jchapman@katalix.comSigned-off-by:
-
Russell King (Oracle) authored
dwmac4 was decoding the duplex mode from the GMAC_PHYIF_CONTROL_STATUS register incorrectly, using GMAC_PHYIF_CTRLSTATUS_LNKMOD_MASK (value 1) rather than GMAC_PHYIF_CTRLSTATUS_LNKMOD (bit 16). Fix this. Fixes: 70523e63 ("drivers: net: stmmac: reworking the PCS code.") Reviewed-by:
Andrew Halaney <ahalaney@redhat.com> Reviewed-by:
Serge Semin <fancer.lancer@gmail.com> Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1sbJvd-001rGD-E3@rmk-PC.armlinux.org.ukSigned-off-by:
-
Linus Torvalds authored
Merge tag 'mm-hotfixes-stable-2024-08-07-18-32' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "Nine hotfixes. Five are cc:stable, the others either pertain to post-6.10 material or aren't considered necessary for earlier kernels. Five are MM and four are non-MM. No identifiable theme here - please see the individual changelogs" * tag 'mm-hotfixes-stable-2024-08-07-18-32' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: padata: Fix possible divide-by-0 panic in padata_mt_helper() mailmap: update entry for David Heidelberg memcg: protect concurrent access to mem_cgroup_idr mm: shmem: fix incorrect aligned index when checking conflicts mm: shmem: avoid allocating huge pages larger than MAX_PAGECACHE_ORDER for shmem mm: list_lru: fix UAF for memory cgroup kcov: properly check for softirq context MAINTAINERS: Update LTP members and web selftests: mm: add s390 to ARCH check
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothJakub Kicinski authored
Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - hci_sync: avoid dup filtering when passive scanning with adv monitor - hci_qca: don't call pwrseq_power_off() twice for QCA6390 - hci_qca: fix QCA6390 support on non-DT platforms - hci_qca: fix a NULL-pointer derefence at shutdown - l2cap: always unlock channel in l2cap_conless_channel() * tag 'for-net-2024-08-07' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: hci_sync: avoid dup filtering when passive scanning with adv monitor Bluetooth: l2cap: always unlock channel in l2cap_conless_channel() Bluetooth: hci_qca: fix a NULL-pointer derefence at shutdown Bluetooth: hci_qca: fix QCA6390 support on non-DT platforms Bluetooth: hci_qca: don't call pwrseq_power_off() twice for QCA6390 ==================== Link: https://patch.msgid.link/20240807210103.142483-1-luiz.dentz@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Tony Nguyen says: ==================== idpf: fix 3 bugs revealed by the Chapter I Alexander Lobakin says: The libeth conversion revealed 2 serious issues which lead to sporadic crashes or WARNs under certain configurations. Additional one was found while debugging these two with kmemleak. This one is targeted stable, the rest can be backported manually later if needed. They can be reproduced only after the conversion is applied anyway. ==================== Link: https://patch.msgid.link/20240806220923.3359860-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Alexander Lobakin authored
The second tagged commit started sometimes (very rarely, but possible) throwing WARNs from net/core/page_pool.c:page_pool_disable_direct_recycling(). Turned out idpf frees interrupt vectors with embedded NAPIs *before* freeing the queues making page_pools' NAPI pointers lead to freed memory before these pools are destroyed by libeth. It's not clear whether there are other accesses to the freed vectors when destroying the queues, but anyway, we usually free queue/interrupt vectors only when the queues are destroyed and the NAPIs are guaranteed to not be referenced anywhere. Invert the allocation and freeing logic making queue/interrupt vectors be allocated first and freed last. Vectors don't require queues to be present, so this is safe. Additionally, this change allows to remove that useless queue->q_vector pointer cleanup, as vectors are still valid when freeing the queues (+ both are freed within one function, so it's not clear why nullify the pointers at all). Fixes: 1c325aac ("idpf: configure resources for TX queues") Fixes: 90912f9f ("idpf: convert header split mode to libeth + napi_build_skb()") Reported-by:
Michal Kubiak <michal.kubiak@intel.com> Signed-off-by:
Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by:
Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20240806220923.3359860-4-anthony.l.nguyen@intel.comSigned-off-by:
-
Michal Kubiak authored
The initialization of vport interrupt consists of two functions: 1) idpf_vport_intr_init() where a generic configuration is done 2) idpf_vport_intr_req_irq() where the irq for each q_vector is requested. The first function used to create a base name for each interrupt using "kasprintf()" call. Unfortunately, although that call allocated memory for a text buffer, that memory was never released. Fix this by removing creating the interrupt base name in 1). Instead, always create a full interrupt name in the function 2), because there is no need to create a base name separately, considering that the function 2) is never called out of idpf_vport_intr_init() context. Fixes: d4d55871 ("idpf: initialize interrupts and enable vport") Cc: stable@vger.kernel.org # 6.7 Signed-off-by:
Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by:
-
Alexander Lobakin authored
The second tagged commit introduced a UAF, as it removed restoring q_vector->vport pointers after reinitializating the structures. This is due to that all queue allocation functions are performed here with the new temporary vport structure and those functions rewrite the backpointers to the vport. Then, this new struct is freed and the pointers start leading to nowhere. But generally speaking, the current logic is very fragile. It claims to be more reliable when the system is low on memory, but in fact, it consumes two times more memory as at the moment of running this function, there are two vports allocated with their queues and vectors. Moreover, it claims to prevent the driver from running into "bad state", but in fact, any error during the rebuild leaves the old vport in the partially allocated state. Finally, if the interface is down when the function is called, it always allocates a new queue set, but when the user decides to enable the interface later on, vport_open() allocates them once again, IOW there's a clear memory leak here. Just don't allocate a new queue set when performing a reset, that solves crashes and memory leaks. Readd the old queue number and reopen the interface on rollback - that solves limbo states when the device is left disabled and/or without HW queues enabled. Fixes: 02cbfba1 ("idpf: add ethtool callbacks") Fixes: e4891e46 ("idpf: split &idpf_queue into 4 strictly-typed queue structures") Signed-off-by:
-
Simon Horman authored
Increase size of queue_name buffer from 30 to 31 to accommodate the largest string written to it. This avoids truncation in the possibly unlikely case where the string is name is the maximum size. Flagged by gcc-14: .../mvpp2_main.c: In function 'mvpp2_probe': .../mvpp2_main.c:7636:32: warning: 'snprintf' output may be truncated before the last format character [-Wformat-truncation=] 7636 | "stats-wq-%s%s", netdev_name(priv->port_list[0]->dev), | ^ .../mvpp2_main.c:7635:9: note: 'snprintf' output between 10 and 31 bytes into a destination of size 30 7635 | snprintf(priv->queue_name, sizeof(priv->queue_name), | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 7636 | "stats-wq-%s%s", netdev_name(priv->port_list[0]->dev), | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 7637 | priv->port_count > 1 ? "+" : ""); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Introduced by commit 118d6298 ("net: mvpp2: add ethtool GOP statistics"). I am not flagging this as a bug as I am not aware that it is one. Compile tested only. Signed-off-by:Marcin Wojtas <marcin.s.wojtas@gmail.com> Link: https://patch.msgid.link/20240806-mvpp2-namelen-v1-1-6dc773653f2f@kernel.orgSigned-off-by:
-
Nikolay Aleksandrov authored
Add netkit support to rt_link.yaml. Only forward(PASS) and blackhole(DROP) policies are allowed to be set by user-space so I've added only them to the yaml to avoid confusion. Example: $ ./tools/net/ynl/cli.py \ --spec Documentation/netlink/specs/rt_link.yaml \ --do getlink --json '{"ifname": "netkit0"}' --output-json | jq ... "linkinfo": { "kind": "netkit", "data": { "primary": 1, "policy": "blackhole", "mode": "l2", "peer-policy": "forward" } }, ... Signed-off-by:Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20240806104531.3296718-1-razor@blackwall.orgSigned-off-by:
-
Simon Horman authored
Recently I noticed that both gcc-14 and clang-18 report that passing a non-string literal as the format argument of alloc_ordered_workqueue is potentially insecure. F.e. clang-18 says: .../bond_main.c:6384:37: warning: format string is not a string literal (potentially insecure) [-Wformat-security] 6384 | bond->wq = alloc_ordered_workqueue(bond_dev->name, WQ_MEM_RECLAIM); | ^~~~~~~~~~~~~~ .../workqueue.h:524:18: note: expanded from macro 'alloc_ordered_workqueue' 524 | alloc_workqueue(fmt, WQ_UNBOUND | __WQ_ORDERED | (flags), 1, ##args) | ^~~ .../bond_main.c:6384:37: note: treat the string as an argument to avoid this 6384 | bond->wq = alloc_ordered_workqueue(bond_dev->name, WQ_MEM_RECLAIM); | ^ | "%s", ..../workqueue.h:524:18: note: expanded from macro 'alloc_ordered_workqueue' 524 | alloc_workqueue(fmt, WQ_UNBOUND | __WQ_ORDERED | (flags), 1, ##args) | ^ Perhaps it is always the case where the contents of bond_dev->name is safe to pass as the format argument. That is, in my understanding, it never contains any format escape sequences. But, it seems better to be safe than sorry. And, as a bonus, compiler output becomes less verbose by addressing this issue as suggested by clang-18. Signed-off-by:Jay Vosburgh <jv@jvosburgh.net> Link: https://patch.msgid.link/20240806-bonding-fmt-v1-1-e75027e45775@kernel.orgSigned-off-by:
-
