- 05 Apr, 2016 2 commits
-
-
Vivien Didelot authored
Only switch families with 4096 address databases have dedicated FID registers for ATU and VTU operations. Factorize the access to the GLOBAL_ATU_FID register and introduce a mv88e6xxx_has_fid_reg() helper function to protect the access to GLOBAL_ATU_FID and GLOBAL_VTU_FID. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
Introduce a mv88e6xxx_has_stu() helper to protect the access to the GLOBAL_VTU_SID register, instead of checking switch families. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 04 Apr, 2016 17 commits
-
-
Simon Horman authored
Remove the sh-irda driver as it appears to be unused since c0bb9b30 ("ARCH: ARM: shmobile: Remove ag5evm board support"). Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Moritz Fischer says: ==================== macb: Codingstyle cleanups resending almost unchanged v2 here: Changes from v2: * Rebased onto net-next * Changed 5th patches commit message * Added Nicholas' and Michal's Acked-Bys Changes from v1: * Backed out variable scope changes * Separated out ether_addr_copy into it's own commit * Fixed typo in comments as suggested by Joe ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Moritz Fischer authored
Acked-by:
Michal Simek <michal.simek@xilinx.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Moritz Fischer authored
Checkpatch suggests using ether_addr_copy over memcpy to copy the mac address. Acked-by:
Michal Simek <michal.simek@xilinx.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Moritz Fischer authored
This commit deals with a bunch of checkpatch suggestions that without changing behavior make checkpatch happier. Acked-by:
Michal Simek <michal.simek@xilinx.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Moritz Fischer authored
This commit takes care of the coding style warnings that are mostly due to a different comment style and lines over 80 chars, as well as a dangling else. Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Moritz Fischer authored
checkpatch.pl gave the following error: ERROR: space required before the open parenthesis '(' + for(; p < end; p++, offset += 4) Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kazuya Mizuguchi authored
This patch supports the following interrupts. - One interrupt for multiple (timestamp, error, gPTP) - One interrupt for emac - Four interrupts for dma queue (best effort rx/tx, network control rx/tx) This patch improve efficiency of the interrupt handler by adding the interrupt handler corresponding to each interrupt source described above. Additionally, it reduces the number of times of the access to EthernetAVB IF. Also this patch prevent this driver depends on the whim of a boot loader. [ykaneko0929@gmail.com: define bit names of registers] [ykaneko0929@gmail.com: add comment for gen3 only registers] [ykaneko0929@gmail.com: fix coding style] [ykaneko0929@gmail.com: update changelog] [ykaneko0929@gmail.com: gen3: fix initialization of interrupts] [ykaneko0929@gmail.com: gen3: fix clearing interrupts] [ykaneko0929@gmail.com: gen3: add helper function for request_irq()] [ykaneko0929@gmail.com: gen3: remove IRQF_SHARED flag for request_irq()] [ykaneko0929@gmail.com: revert ravb_close() and ravb_ptp_stop()] [ykaneko0929@gmail.com: avoid calling free_irq() to non-hooked interrupts] [ykaneko0929@gmail.com: make NC/BE interrupt handler a function] [ykaneko0929@gmail.com: make timestamp interrupt handler a function] [ykaneko0929@gmail.com: timestamp interrupt is handled in multiple interrupt handler instead of dma queue interrupt handler] Signed-off-by:
Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by:
Yoshihiro Kaneko <ykaneko0929@gmail.com> Acked-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Soheil Hassas Yeganeh says: ==================== add TX timestamping via cmsg This patch series aim at enabling TX timestamping via cmsg. Currently, to occasionally sample TX timestamping on a socket, applications need to call setsockopt twice: first for enabling timestamps and then for disabling them. This is an unnecessary overhead. With cmsg, in contrast, applications can sample TX timestamps per sendmsg(). This patch series adds the code for processing SO_TIMESTAMPING for cmsg's of the SOL_SOCKET level, and adds the glue code for TCP, UDP, and RAW for both IPv4 and IPv6. This implementation supports overriding timestamp generation flags (i.e., SOF_TIMESTAMPING_TX_*) but not timestamp reporting flags. Applications must still enable timestamp reporting via setsockopt to receive timestamps. This series does not change existing timestamping behavior for applications that are using socket options. I will follow up with another patch to enable timestamping for active TFO (client-side TCP Fast Open) and also setting packet mark via cmsgs. Thanks! Changes in v2: - Replace u32 with __u32 in the documentation. Changes in v3: - Fix the broken build for L2TP (due to changes in IPv6). ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Soheil Hassas Yeganeh authored
Update docs and add code snippet for using cmsg for timestamping. Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Soheil Hassas Yeganeh authored
Currently, SOL_TIMESTAMPING can only be enabled using setsockopt. This is very costly when users want to sample writes to gather tx timestamps. Add support for enabling SO_TIMESTAMPING via control messages by using tsflags added in `struct sockcm_cookie` (added in the previous patches in this series) to set the tx_flags of the last skb created in a sendmsg. With this patch, the timestamp recording bits in tx_flags of the skbuff is overridden if SO_TIMESTAMPING is passed in a cmsg. Please note that this is only effective for overriding the recording timestamps flags. Users should enable timestamp reporting (e.g., SOF_TIMESTAMPING_SOFTWARE | SOF_TIMESTAMPING_OPT_ID) using socket options and then should ask for SOF_TIMESTAMPING_TX_* using control messages per sendmsg to sample timestamps for each write. Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Soheil Hassas Yeganeh authored
Process socket-level control messages by invoking __sock_cmsg_send in ip6_datagram_send_ctl for control messages on the SOL_SOCKET layer. This makes sure whenever ip6_datagram_send_ctl is called for udp and raw, we also process socket-level control messages. This is a bit uglier than IPv4, since IPv6 does not have something like ipcm_cookie. Perhaps we can later create a control message cookie for IPv6? Note that this commit interprets new control messages that were ignored before. As such, this commit does not change the behavior of IPv6 control messages. Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Soheil Hassas Yeganeh authored
Process socket-level control messages by invoking __sock_cmsg_send in ip_cmsg_send for control messages on the SOL_SOCKET layer. This makes sure whenever ip_cmsg_send is called in udp, icmp, and raw, we also process socket-level control messages. Note that this commit interprets new control messages that were ignored before. As such, this commit does not change the behavior of IPv4 control messages. Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Soheil Hassas Yeganeh authored
Accept SO_TIMESTAMPING in control messages of the SOL_SOCKET level as a basis to accept timestamping requests per write. This implementation only accepts TX recording flags (i.e., SOF_TIMESTAMPING_TX_HARDWARE, SOF_TIMESTAMPING_TX_SOFTWARE, SOF_TIMESTAMPING_TX_SCHED, and SOF_TIMESTAMPING_TX_ACK) in control messages. Users need to set reporting flags (e.g., SOF_TIMESTAMPING_OPT_ID) per socket via socket options. This commit adds a tsflags field in sockcm_cookie which is set in __sock_cmsg_send. It only override the SOF_TIMESTAMPING_TX_* bits in sockcm_cookie.tsflags allowing the control message to override the recording behavior per write, yet maintaining the value of other flags. This patch implements validating the control message and setting tsflags in struct sockcm_cookie. Next commits in this series will actually implement timestamping per write for different protocols. Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Soheil Hassas Yeganeh authored
Currently, to avoid a cache line miss for accessing skb_shinfo, tcp_ack_tstamp skips socket that do not have SOF_TIMESTAMPING_TX_ACK bit set in sk_tsflags. This is implemented based on an implicit assumption that the SOF_TIMESTAMPING_TX_ACK is set via socket options for the duration that ACK timestamps are needed. To implement per-write timestamps, this check should be removed and replaced with a per-packet alternative that quickly skips packets missing ACK timestamps marks without a cache-line miss. To enable per-packet marking without a cache line miss, use one bit in TCP_SKB_CB to mark a whether a SKB might need a ack tx timestamp or not. Further checks in tcp_ack_tstamp are not modified and work as before. Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Willem de Bruijn <willemb@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Soheil Hassas Yeganeh authored
SOF_TIMESTAMPING_OPT_ID is set to get data-independent IDs to associate timestamps with send calls. For TCP connections, tp->snd_una is used as the starting point to calculate relative IDs. This socket option will fail if set before the handshake on a passive TCP fast open connection with data in SYN or SYN/ACK, since setsockopt requires the connection to be in the ESTABLISHED state. To address these, instead of limiting the option to the ESTABLISHED state, accept the SOF_TIMESTAMPING_OPT_ID option as long as the connection is not in LISTEN or CLOSE states. Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Willem de Bruijn <willemb@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Willem de Bruijn authored
To process cmsg's of the SOL_SOCKET level in addition to cmsgs of another level, protocols can call sock_cmsg_send(). This causes a double walk on the cmsghdr list, one for SOL_SOCKET and one for the other level. Extract the inner demultiplex logic from the loop that walks the list, to allow having this called directly from a walker in the protocol specific code. Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 03 Apr, 2016 17 commits
-
-
David S. Miller authored
Alexandre TORGUE says: ==================== Enhance stmmac driver to support GMAC4.x IP This is a subset of patch to enhance current stmmac driver to support new GMAC4.x chips. New set of callbacks is defined to support this new family: descriptors, dma, core. One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers (not yet implemented) Below some throughput figures obtained on some boxes: iperf (mbps) -------------------------------------- tcp udp tx rx tx rx ----------------- GMAC4.x 935 930 750 800 Note: There is a change in 4.10a databook on bitfield mapping of DMA_CHANx_INTR_ENA register. This requires to have é diffrent set of callbacks between IP 4.00a and 4.10a. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexandre TORGUE authored
Signed-off-by:
Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexandre TORGUE authored
This patch just updates the driver to the version fully tested on STi platforms. This version is Jan_2016. Signed-off-by:
Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexandre TORGUE authored
Update stmmac driver documentation according to new GMAC 4.x family. Signed-off-by:
Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexandre TORGUE authored
This patch adds the whole GMAC4 support inside the stmmac d.d. now able to use the new HW and some new features i.e.: TSO. It is missing the multi-queue and split Header support at this stage. This patch also updates the driver version and the stmmac.txt. Signed-off-by:
Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexandre TORGUE authored
This is to support the snps,dwmac-4.00 and snps,dwmac-4.10a and related features on the platform driver. See binding doc for further details. Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexandre TORGUE authored
For gmac3, the MMC addr map is: 0x100 - 0x2fc For gmac4, the MMC addr map is: 0x700 - 0x8fc So instead of adding 0x600 to the IO address when setup the mmc, the RMON base address is saved inside the private structure and then used to manage the counters. Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexandre TORGUE authored
This is the initial support for GMAC4 that includes the main callbacks to setup the core module: including Csum, basic filtering, mac address and interrupt (MMC, MTL, PMT) No LPI added. Signed-off-by:
Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexandre TORGUE authored
DMA behavior is linked to descriptor management: -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. Up to 8 DMA could be use but currently we only use one (channel0) Signed-off-by:
Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexandre TORGUE authored
This is the main header file to define all the macro used for GMAC4 DMA and CORE parts. Signed-off-by:
Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexandre TORGUE authored
One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by:
Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexandre TORGUE authored
synopsys_uid is only used once after setup, to get synopsys_id by using shitf/mask operation. It's no longer used then. So, remove this temporary variable and directly compute synopsys_id from setup routine. Acked-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by:
Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexandre TORGUE authored
To avoid lot of check in stmmac_main for display ring management and support the GMAC4 chip, the display_ring function is moved into dedicated descriptor file. Signed-off-by:
Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexandre TORGUE authored
On next GMAC IP generation (4.xx), the way to get hw feature is not the same than on previous 3.xx. As it is hardware dependent, the way to get hw capabilities should be defined in dma ops of each MAC IP. It will avoid also a huge computation of hw capabilities in stmmac_main. Signed-off-by:
Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lisheng authored
The patch adds support of pause ctrl for HNS V2, and this feature is lost by HNS V1: 1) service ports can disable rx pause frame, 2) debug ports can open tx/rx pause frame. And this patch updates the REGs about the pause ctrl when updated status function called by upper layer routine. Signed-off-by:
Lisheng <lisheng011@huawei.com> Signed-off-by:
Yisen Zhuang <Yisen.Zhuang@huawei.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Haishuang Yan authored
Since nla_get_in_addr and nla_put_in_addr were implemented, so use them appropriately. Signed-off-by:
Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yuchung Cheng authored
For non-SACK connections, cwnd is lowered to inflight plus 3 packets when the recovery ends. This is an optional feature in the NewReno RFC 2582 to reduce the potential burst when cwnd is "re-opened" after recovery and inflight is low. This feature is questionably effective because of PRR: when the recovery ends (i.e., snd_una == high_seq) NewReno holds the CA_Recovery state for another round trip to prevent false fast retransmits. But if the inflight is low, PRR will overwrite the moderated cwnd in tcp_cwnd_reduction() later regardlessly. So if a receiver responds bogus ACKs (i.e., acking future data) to speed up transfer after recovery, it can only induce a burst up to a window worth of data packets by acking up to SND.NXT. A restart from (short) idle or receiving streched ACKs can both cause such bursts as well. On the other hand, if the recovery ends because the sender detects the losses were spurious (e.g., reordering). This feature unconditionally lowers a reverted cwnd even though nothing was lost. By principle loss recovery module should not update cwnd. Further pacing is much more effective to reduce burst. Hence this patch removes the cwnd moderation feature. v2 changes: revised commit message on bogus ACKs and burst, and missing signature Signed-off-by:
Matt Mathis <mattmathis@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 02 Apr, 2016 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Missing device reference in IPSEC input path results in crashes during device unregistration. From Subash Abhinov Kasiviswanathan. 2) Per-queue ISR register writes not being done properly in macb driver, from Cyrille Pitchen. 3) Stats accounting bugs in bcmgenet, from Patri Gynther. 4) Lightweight tunnel's TTL and TOS were swapped in netlink dumps, from Quentin Armitage. 5) SXGBE driver has off-by-one in probe error paths, from Rasmus Villemoes. 6) Fix race in save/swap/delete options in netfilter ipset, from Vishwanath Pai. 7) Ageing time of bridge not set properly when not operating over a switchdev device. Fix from Haishuang Yan. 8) Fix GRO regression wrt nested FOU/GUE based tunnels, from Alexander Duyck. 9) IPV6 UDP code bumps wrong stats, from Eric Dumazet. 10) FEC driver should only access registers that actually exist on the given chipset, fix from Fabio Estevam. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits) net: mvneta: fix changing MTU when using per-cpu processing stmmac: fix MDIO settings Revert "stmmac: Fix 'eth0: No PHY found' regression" stmmac: fix TX normal DESC net: mvneta: use cache_line_size() to get cacheline size net: mvpp2: use cache_line_size() to get cacheline size net: mvpp2: fix maybe-uninitialized warning tun, bpf: fix suspicious RCU usage in tun_{attach, detach}_filter net: usb: cdc_ncm: adding Telit LE910 V2 mobile broadband card rtnl: fix msg size calculation in if_nlmsg_size() fec: Do not access unexisting register in Coldfire net: mvneta: replace MVNETA_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTES net: mvpp2: replace MVPP2_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTES net: dsa: mv88e6xxx: Clear the PDOWN bit on setup net: dsa: mv88e6xxx: Introduce _mv88e6xxx_phy_page_{read, write} bpf: make padding in bpf_tunnel_key explicit ipv6: udp: fix UDP_MIB_IGNOREDMULTI updates bnxt_en: Fix ethtool -a reporting. bnxt_en: Fix typo in bnxt_hwrm_set_pause_common(). bnxt_en: Implement proper firmware message padding. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fixes from Stephen Boyd: "A handful of const updates for reset ops and a couple fixes to the newly introduced IPQ4019 clock driver" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: ipq4019: add some fixed clocks for ddrppl and fepll clk: qcom: ipq4019: switch remaining defines to enums clk: qcom: Make reset_control_ops const clk: tegra: Make reset_control_ops const clk: sunxi: Make reset_control_ops const clk: atlas7: Make reset_control_ops const clk: rockchip: Make reset_control_ops const clk: mmp: Make reset_control_ops const clk: mediatek: Make reset_control_ops const
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management and ACPI fix from Rafael J. Wysocki: "Just one fix for a nasty boot failure on some systems based on Intel Skylake that shipped with broken firmware where enabling hardware-coordinated P-states management (HWP) causes a faulty interrupt handler in SMM to be invoked and crash the system (Srinivas Pandruvada)" * tag 'pm+acpi-4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / processor: Request native thermal interrupt handling via _OSC
-
Linus Torvalds authored
Merge fixes from Andrew Morton: "11 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: .mailmap: add Christophe Ricard Make CONFIG_FHANDLE default y mm/page_isolation.c: fix the function comments oom, oom_reaper: do not enqueue task if it is on the oom_reaper_list head mm/page_isolation: fix tracepoint to mirror check function behavior mm/rmap: batched invalidations should use existing api x86/mm: TLB_REMOTE_SEND_IPI should count pages mm: fix invalid node in alloc_migrate_target() include/linux/huge_mm.h: return NULL instead of false for pmd_trans_huge_lock() mm, kasan: fix compilation for CONFIG_SLAB MAINTAINERS: orangefs mailing list is subscribers-only
-