Signed-off-by: Dima Zavin <dima@android.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

Some smd clients may write from multiple threads, in which case it's
not safe to call smd_write without holding a lock.  smd_write_atomic()
provides the same functionality as smd_write() but obtains the smd
lock first.
Signed-off-by: Brian Swetland <swetland@google.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

Signed-off-by: Iliyan Malchev <malchev@google.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

Don't mark a channel as allocated if we failed to allocate it
(perhaps the modem updated one table but not the other, etc)
Signed-off-by: Brian Swetland <swetland@google.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

When we read data out of the sender's fifo, we need to advance the sender's
tail pointer, not the receiver's.
Signed-off-by: Haley Teng <Haley_Teng@htc.com>
Acked-by: Dima Zavin <dima@android.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

- QSD8250 has a DSP that speaks SMD, in addition to the modem
- handle a separate list of modem vs dsp channels
- install dsp smd irq handler as necessary
Signed-off-by: Brian Swetland <swetland@google.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

- pull debug code into smd_debug.c
- move necessary structures and defines into smd_private.h
- fix some comment formatting, etc
Signed-off-by: Brian Swetland <swetland@google.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

The new protocol require writing to two state fields, and reading
several fields.
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

- support both v2 and v1 style smd channels
- support both v2 and v1 smsm shared state
- update smsm state defines and smem item enum
- prep work for dealing with smd to qdsp6
- simplify some smem access to minimize use of smem_alloc() at runtime
Signed-off-by: Brian Swetland <swetland@google.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

Signed-off-by: Brian Swetland <swetland@google.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

This code provides the low level interface to the "shared memory
state machine" (smsm), and the virtual serial channels (smd), used
to communicate with the baseband processor.  Higher level transports
(rpc, ethernet, AT command channel, etc) ride on top of this.
Signed-off-by: Brian Swetland <swetland@google.com>

Also, convert all SDCC IRQ resources to be named. No longer pass status_irq
in the platform_data
Signed-off-by: Dima Zavin <dima@android.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

Signed-off-by: San Mehat <san@google.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

Just adds a mailing list to the MSM maintainer entry.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

This adds a basic board file without Kconfig changes.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

Signed-off-by: Willie Ruan <wruan@quicinc.com>

Support independent enable and disable by clients for common
vreg. First enable switches on and last disable switches off.

This change has no check for voltage level so clients
must agree on level for common vreg.
Signed-off-by: Matthew Wilson <mtwilson@quicinc.com>

Fixes the following warning,

arch/arm/mach-msm/acpuclock-arm11.c:138: warning: 'freq_table' defined but not used

when CONFIG_CPU_FREQ_TABLE is not enabled.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

Keep track of the success/failure of the last vreg proc comm
command, and return that on debugfs reads.
Signed-off-by: Steve Muckle <smuckle@quicinc.com>

Signed-off-by: Steve Muckle <smuckle@quicinc.com>

Move the naming of this board file back to the original Google naming.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

This adds acpuclock-arm11.c from Google. This provides control
over the cpu frequency for arm11 cpu's.

This has shared authorship between Google, and Qualcomm. Most
of it was written by Mike Chan at Google.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

Avoids problems on the scorpion core.
Signed-off-by: Brian Swetland <swetland@google.com>

Signed-off-by: Arve Hjønnevåg <arve@android.com>

Signed-off-by: Arve Hjønnevåg <arve@android.com>

Signed-off-by: Dima Zavin <dima@android.com>

Signed-off-by: Brian Swetland <swetland@google.com>

Signed-off-by: Arve Hjønnevåg <arve@android.com>

This adds a basic board file without Kconfig changes.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

This adds a basic board file without Kconfig changes.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

This adds a basic board file without Kconfig changes.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

This adds a basic board file without Kconfig changes.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

This reverts commit ee3c454b.

As request by Russell King.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

Handle incorrectly reported permission faults for qsd8650.  On
permission faults, retry MVA to PA conversion.  If retry detects
translation fault.  Report as translation fault.

Cc: Jamie Lokier <jamie@shareable.org>
Signed-off-by: Dave Estes <cestes@quicinc.com>

add oprofile pmu support for msm.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

MSM supports the <linux/clk.h> interface.
Acked-by: David Brown <davidb@quicinc.com>
Signed-off-by: Steve Muckle <smuckle@quicinc.com>

ARCH_MSM supports armv7 cpus, so we're pushed the CPU_V6/CPU_V7 selection
down into the arch/arm/mach-msm/Kconfig.

Also update the description to be a bit more accurate.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging: vme: Re-introduce necessary brackets
  Staging: iio: fix up the iio_get_new_idr_val comment
  Staging: add Add Sitecom WL-349 to rtl8192su
  Staging: rt2860: add Belkin F5D8055 Wireless-N USB Dongle device id
  staging: rtl8192su: add Support for Belkin F5D8053 v6
  Staging: dt3155: fix 50Hz configuration
  staging: usbip: Fix deadlock
  Staging: rtl8192su: add USB ID for 0bda:8171
  Staging: hv: name network device ethX rather than sethX
  Staging: hv: Fix up memory leak on HvCleanup
  Staging: hv: Fix a bug affecting IPv6
  staging: iio: ring_sw: Fix incorrect test on successful read of last value, causes infinite loop
  staging: iio: Function iio_get_new_idr_val() return negative value if fails.
  Staging: iio: adc: fix dangling pointers
  Staging: iio: light: fix dangling pointers
  Staging: iio: test for failed allocation
  staging: iio: lis3l02dq - incorrect ws used in container of call.