- 29 Nov, 2013 12 commits
-
-
Greg Thelen authored
commit a399b29d upstream. When IPC_RMID races with other shm operations there's potential for use-after-free of the shm object's associated file (shm_file). Here's the race before this patch: TASK 1 TASK 2 ------ ------ shm_rmid() ipc_lock_object() shmctl() shp = shm_obtain_object_check() shm_destroy() shum_unlock() fput(shp->shm_file) ipc_lock_object() shmem_lock(shp->shm_file) <OOPS> The oops is caused because shm_destroy() calls fput() after dropping the ipc_lock. fput() clears the file's f_inode, f_path.dentry, and f_path.mnt, which causes various NULL pointer references in task 2. I reliably see the oops in task 2 if with shmlock, shmu This patch fixes the races by: 1) set shm_file=NULL in shm_destroy() while holding ipc_object_lock(). 2) modify at risk operations to check shm_file while holding ipc_object_lock(). Example workloads, which each trigger oops... Workload 1: while true; do id=$(shmget 1 4096) shm_rmid $id & shmlock $id & wait done The oops stack shows accessing NULL f_inode due to racing fput: _raw_spin_lock shmem_lock SyS_shmctl Workload 2: while true; do id=$(shmget 1 4096) shmat $id 4096 & shm_rmid $id & wait done The oops stack is similar to workload 1 due to NULL f_inode: touch_atime shmem_mmap shm_mmap mmap_region do_mmap_pgoff do_shmat SyS_shmat Workload 3: while true; do id=$(shmget 1 4096) shmlock $id shm_rmid $id & shmunlock $id & wait done The oops stack shows second fput tripping on an NULL f_inode. The first fput() completed via from shm_destroy(), but a racing thread did a get_file() and queued this fput(): locks_remove_flock __fput ____fput task_work_run do_notify_resume int_signal Fixes: c2c737a0 ("ipc,shm: shorten critical region for shmat") Fixes: 2caacaa8 ("ipc,shm: shorten critical region for shmctl") Signed-off-by:
Greg Thelen <gthelen@google.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Rik van Riel <riel@redhat.com> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jesper Nilsson authored
commit 3a72660b upstream. Commit 2caacaa8 ("ipc,shm: shorten critical region for shmctl") restructured the ipc shm to shorten critical region, but introduced a path where the return value could be -EPERM, even if the operation actually was performed. Before the commit, the err return value was reset by the return value from security_shm_shmctl() after the if (!ns_capable(...)) statement. Now, we still exit the if statement with err set to -EPERM, and in the case of SHM_UNLOCK, it is not reset at all, and used as the return value from shmctl. To fix this, we only set err when errors occur, leaving the fallthrough case alone. Signed-off-by:
Jesper Nilsson <jesper.nilsson@axis.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Rik van Riel <riel@redhat.com> Cc: Michel Lespinasse <walken@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Markus Pargmann authored
commit 5d0f801a upstream. If we handle end of block messages with higher priority than a lost message, we can run into an endless interrupt loop. This is reproducable with a am335x processor and "cansequence -r" at 1Mbit. As soon as we loose a packet we can't escape from an interrupt loop. This patch fixes the problem by handling lost packets before EOB packets. Signed-off-by:
Markus Pargmann <mpa@pengutronix.de> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Herbert Xu authored
commit f262f0f5 upstream. The cbc-aes-s390 algorithm incorrectly places the IV in the tfm data structure. As the tfm is shared between multiple threads, this introduces a possibility of data corruption. This patch fixes this by moving the parameter block containing the IV and key onto the stack (the block is 48 bytes long). The same bug exists elsewhere in the s390 crypto system and they will be fixed in subsequent patches. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Neil Horman authored
commit 714b33d1 upstream. Stephan Mueller reported to me recently a error in random number generation in the ansi cprng. If several small requests are made that are less than the instances block size, the remainder for loop code doesn't increment rand_data_valid in the last iteration, meaning that the last bytes in the rand_data buffer gets reused on the subsequent smaller-than-a-block request for random data. The fix is pretty easy, just re-code the for loop to make sure that rand_data_valid gets incremented appropriately Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Reported-by:
Stephan Mueller <stephan.mueller@atsec.com> CC: Stephan Mueller <stephan.mueller@atsec.com> CC: Petr Matousek <pmatouse@redhat.com> CC: Herbert Xu <herbert@gondor.apana.org.au> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Olivier Sobrie authored
commit 896e23bd upstream. Some devices, like the Kvaser Memorator Professional, have several bulk in endpoints. Only the first one found must be used by the driver. The same holds for the bulk out endpoint. The official Kvaser driver (leaf) was used as reference for this patch. Signed-off-by:
Olivier Sobrie <olivier@sobrie.be> Signed-off-by:
-
Johan Hovold authored
commit a91ccd26 upstream. Make sure to return errors from tiocmget rather than rely on uninitialised stack data. Signed-off-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
-
Bob Moore authored
commit 4be4be8f upstream. This change fixes a problem where a Store operation to an ArgX object that contained a reference to a field object did not complete the automatic dereference and then write to the actual field object. Instead, the object type of the field object was inadvertently changed to match the type of the source operand. The new behavior will actually write to the field object (buffer field or field unit), thus matching the correct ACPI-defined behavior. Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
-
Bob Moore authored
commit a50abf48 upstream. Disallow the dereference of a reference (via index) to an uninitialized package element. Provides compatibility with other ACPI implementations. ACPICA BZ 1003. References: https://bugs.acpica.org/show_bug.cgi?id=431Signed-off-by:
-
Mahesh Rajashekhara authored
commit b4789b8e upstream. It appears that driver runs into a problem here if fibsize is too small because we allocate user_srbcmd with fibsize size only but later we access it until user_srbcmd->sg.count to copy it over to srbcmd. It is not correct to test (fibsize < sizeof(*user_srbcmd)) because this structure already includes one sg element and this is not needed for commands without data. So, we would recommend to add the following (instead of test for fibsize == 0). Signed-off-by:
Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com> Reported-by:
Nico Golde <nico@ngolde.de> Reported-by:
Fabian Yamaguchi <fabs@goesec.de> Signed-off-by:
-
Dan Carpenter authored
commit a497e47d upstream. If we do a zero size allocation then it will oops. Also we can't be sure the user passes us a NUL terminated string so I've added a terminator. This code can only be triggered by root. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by:
-
Bob Moore authored
commit 63660e05 upstream. Previously, references to these objects were resolved only to the actual FieldUnit or BufferField object. The correct behavior is to resolve these references to an actual value. The problem is that DerefOf did not resolve these objects to actual values. An "Integer" object is simple, return the value. But a field in an operation region will require a read operation. For a BufferField, the appropriate data must be extracted from the parent buffer. NOTE: It appears that this issues is present in Windows7 but not Windows8. Signed-off-by:
-
- 20 Nov, 2013 25 commits
-
-
Greg Kroah-Hartman authored
-
Dan Carpenter authored
commit 47c32ec9 upstream. The "i < " part of the "i < ARRAY_SIZE()" condition was missing. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by:
-
Xenia Ragiadakou authored
commit 9df89d85 upstream. This patch sets the lpm_capable field for root hubs with LPM capabilities. Signed-off-by:
Xenia Ragiadakou <burzalodowa@gmail.com> Reported-by:
Martin MOKREJS <mmokrejs@gmail.com> Suggested-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Krzysztof Mazur authored
commit e58547eb upstream. Ignoring usb_hub_create_port_device() errors cause later NULL pointer deference when uninitialized hub->ports[i] entries are dereferenced after port memory allocation error. Signed-off-by:
Krzysztof Mazur <krzysiek@podlesie.net> Acked-by:
-
Krzysztof Mazur authored
commit d0308d4b upstream. If the hub_configure() fails after setting the hdev->maxchild the hub->ports might be NULL or point to uninitialized kzallocated memory causing NULL pointer dereference in hub_quiesce() during cleanup. Now after such error the hdev->maxchild is set to 0 to avoid cleanup of uninitialized ports. Signed-off-by:
-
Johan Hovold authored
commit 9d3fde86 upstream. Move probe out of __init section and don't use platform_driver_probe which cannot be used with deferred probing. Since commit e9354576 ("gpiolib: Defer failed gpio requests by default") this driver might return -EPROBE_DEFER if a gpio_request fails. Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Signed-off-by:
-
Johan Hovold authored
commit 5c6d6fd1 upstream. Two drivers (atmel-pwm-bl and leds-atmel-pwm) currently depend on the atmel_pwm driver to have bound to any pwm-device before their devices are probed. Support deferred probing of such devices by making sure to return -EPROBE_DEFER from pwm_channel_alloc when no pwm-device has yet been bound. Signed-off-by:
-
Matti Gottlieb authored
commit b4992662 upstream. Add some new PCI IDs to the table for 7000 & 3160 series Signed-off-by:
Matti Gottlieb <matti.gottlieb@intel.com> Reviewed-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Oren Givon authored
commit 93fc6411 upstream. Add new device IDs and configurations to support all the devices. Signed-off-by:
Oren Givon <oren.givon@intel.com> Signed-off-by:
-
Peter Zijlstra authored
commit bf378d34 upstream. The PPC64 people noticed a missing memory barrier and crufty old comments in the perf ring buffer code. So update all the comments and add the missing barrier. When the architecture implements local_t using atomic_long_t there will be double barriers issued; but short of introducing more conditional barrier primitives this is the best we can do. Reported-by:
Victor Kaplansky <victork@il.ibm.com> Tested-by:
Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: michael@ellerman.id.au Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: anton@samba.org Cc: benh@kernel.crashing.org Link: http://lkml.kernel.org/r/20131025173749.GG19466@laptop.lanSigned-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Michael Neuling <mikey@neuling.org> Signed-off-by:
-
Steven Rostedt authored
commit 057db848 upstream. Andrey reported the following report: ERROR: AddressSanitizer: heap-buffer-overflow on address ffff8800359c99f3 ffff8800359c99f3 is located 0 bytes to the right of 243-byte region [ffff8800359c9900, ffff8800359c99f3) Accessed by thread T13003: #0 ffffffff810dd2da (asan_report_error+0x32a/0x440) #1 ffffffff810dc6b0 (asan_check_region+0x30/0x40) #2 ffffffff810dd4d3 (__tsan_write1+0x13/0x20) #3 ffffffff811cd19e (ftrace_regex_release+0x1be/0x260) #4 ffffffff812a1065 (__fput+0x155/0x360) #5 ffffffff812a12de (____fput+0x1e/0x30) #6 ffffffff8111708d (task_work_run+0x10d/0x140) #7 ffffffff810ea043 (do_exit+0x433/0x11f0) #8 ffffffff810eaee4 (do_group_exit+0x84/0x130) #9 ffffffff810eafb1 (SyS_exit_group+0x21/0x30) #10 ffffffff81928782 (system_call_fastpath+0x16/0x1b) Allocated by thread T5167: #0 ffffffff810dc778 (asan_slab_alloc+0x48/0xc0) #1 ffffffff8128337c (__kmalloc+0xbc/0x500) #2 ffffffff811d9d54 (trace_parser_get_init+0x34/0x90) #3 ffffffff811cd7b3 (ftrace_regex_open+0x83/0x2e0) #4 ffffffff811cda7d (ftrace_filter_open+0x2d/0x40) #5 ffffffff8129b4ff (do_dentry_open+0x32f/0x430) #6 ffffffff8129b668 (finish_open+0x68/0xa0) #7 ffffffff812b66ac (do_last+0xb8c/0x1710) #8 ffffffff812b7350 (path_openat+0x120/0xb50) #9 ffffffff812b8884 (do_filp_open+0x54/0xb0) #10 ffffffff8129d36c (do_sys_open+0x1ac/0x2c0) #11 ffffffff8129d4b7 (SyS_open+0x37/0x50) #12 ffffffff81928782 (system_call_fastpath+0x16/0x1b) Shadow bytes around the buggy address: ffff8800359c9700: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd ffff8800359c9780: fd fd fd fd fd fd fd fd fa fa fa fa fa fa fa fa ffff8800359c9800: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa ffff8800359c9880: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa ffff8800359c9900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 =>ffff8800359c9980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00[03]fb ffff8800359c9a00: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa ffff8800359c9a80: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa ffff8800359c9b00: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00 ffff8800359c9b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8800359c9c00: 00 00 00 00 00 00 00 00 fa fa fa fa fa fa fa fa Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap redzone: fa Heap kmalloc redzone: fb Freed heap region: fd Shadow gap: fe The out-of-bounds access happens on 'parser->buffer[parser->idx] = 0;' Although the crash happened in ftrace_regex_open() the real bug occurred in trace_get_user() where there's an incrementation to parser->idx without a check against the size. The way it is triggered is if userspace sends in 128 characters (EVENT_BUF_SIZE + 1), the loop that reads the last character stores it and then breaks out because there is no more characters. Then the last character is read to determine what to do next, and the index is incremented without checking size. Then the caller of trace_get_user() usually nulls out the last character with a zero, but since the index is equal to the size, it writes a nul character after the allocated space, which can corrupt memory. Luckily, only root user has write access to this file. Link: http://lkml.kernel.org/r/20131009222323.04fd1a0d@gandalf.local.homeReported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Anssi Hannula authored
commit 56cac413 upstream. hdmi_setup_fake_chmap() is supposed to set the reported channel map when the channel map is not specified by the user. However, the function indexes channel_allocations[] with a wrong value and extracts the wrong nibble from hdmi_channel_mapping[], causing wrong channel maps to be shown. Fix those issues. Tested on Intel HDMI to correctly generate various channel maps, for example 3,4,14,15,7,8,5,6 (instead of incorrect 3,4,8,7,5,6,14,0) for standard 7.1 channel audio. (Note that the side and rear channels are reported as RL/RR and RLC/RRC, respectively, as per the CEA-861 standard, instead of the more traditional SL/SR and RL/RR.) Note that this only fixes the layouts that only contain traditional 7.1 speakers (2.0, 2.1, 4.0, 5.1, 7.1, etc.). E.g. the rear center of 6.1 is still being shown wrongly due to an issue with from_cea_slot() which will be fixed in a later patch. Signed-off-by:
Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Rui li authored
commit 0636fc50 upstream. Signed-off-by:
Rui li <li.rui27@zte.com.cn> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Gerd Hoffmann authored
commit 7ad96847 upstream. This patch adds a pci stub driver to hyper-fb. The hyperv framebuffer driver will bind to the pci device then, so linux kernel and userspace know there is a proper kernel driver for the device active. lspci shows this for example: [root@dhcp231 ~]# lspci -vs8 00:08.0 VGA compatible controller: Microsoft Corporation Hyper-V virtual VGA (prog-if 00 [VGA controller]) Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at f8000000 (32-bit, non-prefetchable) [size=64M] Expansion ROM at <unassigned> [disabled] Kernel driver in use: hyperv_fb Another effect is that the xorg vesa driver will not attach to the device and thus the Xorg server will automatically use the fbdev driver instead. Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Acked-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Matthias Schiffer authored
commit 6c519bad upstream. batman-adv saves its table of packet handlers as a global state, so handlers must be set up only once (and setting them up a second time will fail). The recently-added network coding support tries to set up its handler each time a new softif is registered, which obviously fails when more that one softif is used (and in consequence, the softif creation fails). Fix this by splitting up batadv_nc_init into batadv_nc_init (which is called only once) and batadv_nc_mesh_init (which is called for each softif); in addition batadv_nc_free is renamed to batadv_nc_mesh_free to keep naming consistent. Signed-off-by:
Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <antonio@meshcoding.com> Cc: David Miller <davem@davemloft.net> Signed-off-by:
-
David Vrabel authored
[ Upstream commit dc62ccac ] If a guest is destroyed without transitioning its frontend to CLOSED, the domain becomes a zombie as netback was not grant unmapping the shared rings. When removing a VIF, transition the backend to CLOSED so the VIF is disconnected if necessary (which will unmap the shared rings etc). This fixes a regression introduced by 279f438e (xen-netback: Don't destroy the netdev until the vif is shut down). Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Paul Durrant <Paul.Durrant@citrix.com> Acked-by:
Wei Liu <wei.liu2@citrix.com> Reviewed-by:
Paul Durrant <paul.durrant@citrix.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Paul Durrant authored
[ Upstream commit ea732dff ] When the frontend state changes netback now specifies its desired state to a new function, set_backend_state(), which transitions through any necessary intermediate states. This fixes an issue observed with some old Windows frontend drivers where they failed to transition through the Closing state and netback would not behave correctly. Signed-off-by:
Ian Campbell <ian.campbell@citrix.com> Signed-off-by:
-
Jack Morgenstein authored
[ Upstream commit c32b7dfb ] In function mlx4_master_deactivate_admin_state() __mlx4_unregister_mac was called using the MAC index. It should be called with the value of the MAC itself. Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Jason Wang authored
[ Upstream commit 6f092343 ] We don't validate iph->ihl which may lead a dead loop if we meet a IPIP skb whose iph->ihl is zero. Fix this by failing immediately when iph->ihl is evil (less than 5). This issue were introduced by commit ec5efe79 (rps: support IPIP encapsulation). Signed-off-by:
Jason Wang <jasowang@redhat.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Petr Matousek <pmatouse@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Daniel Borkmann <dborkman@redhat.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Jason Wang authored
[ Upstream commit ec9debbd ] commit 3ab098df (virtio-net: don't respond to cpu hotplug notifier if we're not ready) tries to bypass the cpu hotplug notifier by checking the config_enable and does nothing is it was false. So it need to try to hold the config_lock mutex which may happen in atomic environment which leads the following warnings: [ 622.944441] CPU0 attaching NULL sched-domain. [ 622.944446] CPU1 attaching NULL sched-domain. [ 622.944485] CPU0 attaching NULL sched-domain. [ 622.950795] BUG: sleeping function called from invalid context at kernel/mutex.c:616 [ 622.950796] in_atomic(): 1, irqs_disabled(): 1, pid: 10, name: migration/1 [ 622.950796] no locks held by migration/1/10. [ 622.950798] CPU: 1 PID: 10 Comm: migration/1 Not tainted 3.12.0-rc5-wl-01249-gb91e82d #317 [ 622.950799] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 622.950802] 0000000000000000 ffff88001d42dba0 ffffffff81a32f22 ffff88001bfb9c70 [ 622.950803] ffff88001d42dbb0 ffffffff810edb02 ffff88001d42dc38 ffffffff81a396ed [ 622.950805] 0000000000000046 ffff88001d42dbe8 ffffffff810e861d 0000000000000000 [ 622.950805] Call Trace: [ 622.950810] [<ffffffff81a32f22>] dump_stack+0x54/0x74 [ 622.950815] [<ffffffff810edb02>] __might_sleep+0x112/0x114 [ 622.950817] [<ffffffff81a396ed>] mutex_lock_nested+0x3c/0x3c6 [ 622.950818] [<ffffffff810e861d>] ? up+0x39/0x3e [ 622.950821] [<ffffffff8153ea7c>] ? acpi_os_signal_semaphore+0x21/0x2d [ 622.950824] [<ffffffff81565ed1>] ? acpi_ut_release_mutex+0x5e/0x62 [ 622.950828] [<ffffffff816d04ec>] virtnet_cpu_callback+0x33/0x87 [ 622.950830] [<ffffffff81a42576>] notifier_call_chain+0x3c/0x5e [ 622.950832] [<ffffffff810e86a8>] __raw_notifier_call_chain+0xe/0x10 [ 622.950835] [<ffffffff810c5556>] __cpu_notify+0x20/0x37 [ 622.950836] [<ffffffff810c5580>] cpu_notify+0x13/0x15 [ 622.950838] [<ffffffff81a237cd>] take_cpu_down+0x27/0x3a [ 622.950841] [<ffffffff81136289>] stop_machine_cpu_stop+0x93/0xf1 [ 622.950842] [<ffffffff81136167>] cpu_stopper_thread+0xa0/0x12f [ 622.950844] [<ffffffff811361f6>] ? cpu_stopper_thread+0x12f/0x12f [ 622.950847] [<ffffffff81119710>] ? lock_release_holdtime.part.7+0xa3/0xa8 [ 622.950848] [<ffffffff81135e4b>] ? cpu_stop_should_run+0x3f/0x47 [ 622.950850] [<ffffffff810ea9b0>] smpboot_thread_fn+0x1c5/0x1e3 [ 622.950852] [<ffffffff810ea7eb>] ? lg_global_unlock+0x67/0x67 [ 622.950854] [<ffffffff810e36b7>] kthread+0xd8/0xe0 [ 622.950857] [<ffffffff81a3bfad>] ? wait_for_common+0x12f/0x164 [ 622.950859] [<ffffffff810e35df>] ? kthread_create_on_node+0x124/0x124 [ 622.950861] [<ffffffff81a45ffc>] ret_from_fork+0x7c/0xb0 [ 622.950862] [<ffffffff810e35df>] ? kthread_create_on_node+0x124/0x124 [ 622.950876] smpboot: CPU 1 is now offline [ 623.194556] SMP alternatives: lockdep: fixing up alternatives [ 623.194559] smpboot: Booting Node 0 Processor 1 APIC 0x1 ... A correct fix is to unregister the hotcpu notifier during restore and register a new one in resume. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Tested-by:
Michael S. Tsirkin <mst@redhat.com> Reviewed-by:
Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by:
-
Wei Liu authored
[ Upstream commit 059dfa6a ] time_after_eq() only works if the delta is < MAX_ULONG/2. For a 32bit Dom0, if netfront sends packets at a very low rate, the time between subsequent calls to tx_credit_exceeded() may exceed MAX_ULONG/2 and the test for timer_after_eq() will be incorrect. Credit will not be replenished and the guest may become unable to send packets (e.g., if prior to the long gap, all credit was exhausted). Use jiffies_64 variant to mitigate this problem for 32bit Dom0. Suggested-by:
Jan Beulich <jbeulich@suse.com> Signed-off-by:
-
Ben Hutchings authored
[ Upstream commit 262e827f ] The length calculation here is now invalid on 32-bit architectures, since sk_buff::tail is a pointer and sk_buff::transport_header is an integer offset: drivers/net/ethernet/chelsio/cxgb3/sge.c: In function 'write_ofld_wr': drivers/net/ethernet/chelsio/cxgb3/sge.c:1603:9: warning: passing argument 4 of 'make_sgl' makes integer from pointer without a cast [enabled by default] adap->pdev); ^ drivers/net/ethernet/chelsio/cxgb3/sge.c:964:28: note: expected 'unsigned int' but argument is of type 'sk_buff_data_t' static inline unsigned int make_sgl(const struct sk_buff *skb, ^ Use the appropriate skb accessor functions. Compile-tested only. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Fixes: 1a37e412 ('net: Use 16bits for *_headers fields of struct skbuff') Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 01ba16d6 ] On receiving a packet too big icmp error we update the expire value by calling rt6_update_expires. This function uses dst_set_expires which is implemented that it can only reduce the expiration value of the dst entry. If we insert new routing non-expiry information into the ipv6 fib where we already have a matching rt6_info we only clear the RTF_EXPIRES flag in rt6i_flags and leave the dst.expires value as is. When new mtu information arrives for that cached dst_entry we again call dst_set_expires. This time it won't update the dst.expire value because we left the dst.expire value intact from the last update. So dst_set_expires won't touch dst.expires. Fix this by resetting dst.expires when clearing the RTF_EXPIRE flag. dst_set_expires checks for a zero expiration and updates the dst.expires. In the past this (not updating dst.expires) was necessary because dst.expire was placed in a union with the dst_entry *from reference and rt6_clean_expires did assign NULL to it. This split happend in ecd98837 ("ipv6: fix race condition regarding dst->expires and dst->from"). Reported-by:
Steinar H. Gunderson <sgunderson@bigfoot.com> Reported-by:
Valentijn Sessink <valentyn@blub.net> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit e3bc10bd ] On receiving a packet too big icmp error we check if our current cached dst_entry in the socket is still valid. This validation check did not care about the expiration of the (cached) route. The error path I traced down: The socket receives a packet too big mtu notification. It still has a valid dst_entry and thus issues the ip6_rt_pmtu_update on this dst_entry, setting RTF_EXPIRE and updates the dst.expiration value (which could fail because of not up-to-date expiration values, see previous patch). In some seldom cases we race with a) the ip6_fib gc or b) another routing lookup which would result in a recreation of the cached rt6_info from its parent non-cached rt6_info. While copying the rt6_info we reinitialize the metrics store by copying it over from the parent thus invalidating the just installed pmtu update (both dsts use the same key to the inetpeer storage). The dst_entry with the just invalidated metrics data would just get its RTF_EXPIRES flag cleared and would continue to stay valid for the socket. We should have not issued the pmtu update on the already expired dst_entry in the first placed. By checking the expiration on the dst entry and doing a relookup in case it is out of date we close the race because we would install a new rt6_info into the fib before we issue the pmtu update, thus closing this race. Not reliably updating the dst.expire value was fixed by the patch "ipv6: reset dst.expires value when clearing expire flag". Reported-by:
-
Pravin B Shelar authored
[ No applicable upstream commit, the upstream implementation is now completely different and doesn't have this bug. ] In case of WCCPv2 GRE header has extra four bytes. Following patch pull those extra four bytes so that skb offsets are set correctly. CC: Eric Dumazet <eric.dumazet@gmail.com> Reported-by:
Peter Schmitt <peter.schmitt82@yahoo.de> Tested-by:
Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
-
- 13 Nov, 2013 3 commits
-
-
Greg Kroah-Hartman authored
-
Jon Mason authored
commit 1517a3f2 upstream. Debugfs was setup in NTB to only have a single debugfs directory. This resulted in the leaking of debugfs directories and files when multiple NTB devices were present, due to each device stomping on the variables containing the previous device's values (thus preventing them from being freed on cleanup). Correct this by creating a secondary directory of the PCI BDF for each device present, and nesting the previously existing information in those directories. Signed-off-by:
Jon Mason <jon.mason@intel.com> Signed-off-by:
-
Jon Mason authored
commit b6750cfe upstream. Due to ambiguous documentation, the USD/DSD identification is backward when compared to the setting in BIOS. Correct the bits to match the BIOS setting. Signed-off-by:
-
