1. 09 Aug, 2018 7 commits
  2. 08 Aug, 2018 3 commits
  3. 07 Aug, 2018 4 commits
    • Bart Van Assche's avatar
      cfq: Suppress compiler warnings about comparisons · f7ecb1b1
      Bart Van Assche authored
      This patch does not change any functionality but avoids that gcc
      reports the following warnings when building with W=1:
      
      block/cfq-iosched.c: In function ?cfq_back_seek_max_store?:
      block/cfq-iosched.c:4741:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
        if (__data < (MIN))      \
                   ^
      block/cfq-iosched.c:4756:1: note: in expansion of macro ?STORE_FUNCTION?
       STORE_FUNCTION(cfq_back_seek_max_store, &cfqd->cfq_back_max, 0, UINT_MAX, 0);
       ^~~~~~~~~~~~~~
      block/cfq-iosched.c: In function ?cfq_slice_idle_store?:
      block/cfq-iosched.c:4741:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
        if (__data < (MIN))      \
                   ^
      block/cfq-iosched.c:4759:1: note: in expansion of macro ?STORE_FUNCTION?
       STORE_FUNCTION(cfq_slice_idle_store, &cfqd->cfq_slice_idle, 0, UINT_MAX, 1);
       ^~~~~~~~~~~~~~
      block/cfq-iosched.c: In function ?cfq_group_idle_store?:
      block/cfq-iosched.c:4741:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
        if (__data < (MIN))      \
                   ^
      block/cfq-iosched.c:4760:1: note: in expansion of macro ?STORE_FUNCTION?
       STORE_FUNCTION(cfq_group_idle_store, &cfqd->cfq_group_idle, 0, UINT_MAX, 1);
       ^~~~~~~~~~~~~~
      block/cfq-iosched.c: In function ?cfq_low_latency_store?:
      block/cfq-iosched.c:4741:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
        if (__data < (MIN))      \
                   ^
      block/cfq-iosched.c:4765:1: note: in expansion of macro ?STORE_FUNCTION?
       STORE_FUNCTION(cfq_low_latency_store, &cfqd->cfq_latency, 0, 1, 0);
       ^~~~~~~~~~~~~~
      block/cfq-iosched.c: In function ?cfq_slice_idle_us_store?:
      block/cfq-iosched.c:4775:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
        if (__data < (MIN))      \
                   ^
      block/cfq-iosched.c:4782:1: note: in expansion of macro ?USEC_STORE_FUNCTION?
       USEC_STORE_FUNCTION(cfq_slice_idle_us_store, &cfqd->cfq_slice_idle, 0, UINT_MAX);
       ^~~~~~~~~~~~~~~~~~~
      block/cfq-iosched.c: In function ?cfq_group_idle_us_store?:
      block/cfq-iosched.c:4775:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
        if (__data < (MIN))      \
                   ^
      block/cfq-iosched.c:4783:1: note: in expansion of macro ?USEC_STORE_FUNCTION?
       USEC_STORE_FUNCTION(cfq_group_idle_us_store, &cfqd->cfq_group_idle, 0, UINT_MAX);
       ^~~~~~~~~~~~~~~~~~~
      Signed-off-by: default avatarBart Van Assche <bart.vanassche@wdc.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      f7ecb1b1
    • Bart Van Assche's avatar
      cfq: Annotate fall-through in a switch statement · 9b4f4346
      Bart Van Assche authored
      This patch avoids that gcc complains about fall-through when building
      with W=1.
      Signed-off-by: default avatarBart Van Assche <bart.vanassche@wdc.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      9b4f4346
    • Anchal Agarwal's avatar
      blk-wbt: Avoid lock contention and thundering herd issue in wbt_wait · 2887e41b
      Anchal Agarwal authored
      I am currently running a large bare metal instance (i3.metal)
      on EC2 with 72 cores, 512GB of RAM and NVME drives, with a
      4.18 kernel. I have a workload that simulates a database
      workload and I am running into lockup issues when writeback
      throttling is enabled,with the hung task detector also
      kicking in.
      
      Crash dumps show that most CPUs (up to 50 of them) are
      all trying to get the wbt wait queue lock while trying to add
      themselves to it in __wbt_wait (see stack traces below).
      
      [    0.948118] CPU: 45 PID: 0 Comm: swapper/45 Not tainted 4.14.51-62.38.amzn1.x86_64 #1
      [    0.948119] Hardware name: Amazon EC2 i3.metal/Not Specified, BIOS 1.0 10/16/2017
      [    0.948120] task: ffff883f7878c000 task.stack: ffffc9000c69c000
      [    0.948124] RIP: 0010:native_queued_spin_lock_slowpath+0xf8/0x1a0
      [    0.948125] RSP: 0018:ffff883f7fcc3dc8 EFLAGS: 00000046
      [    0.948126] RAX: 0000000000000000 RBX: ffff887f7709ca68 RCX: ffff883f7fce2a00
      [    0.948128] RDX: 000000000000001c RSI: 0000000000740001 RDI: ffff887f7709ca68
      [    0.948129] RBP: 0000000000000002 R08: 0000000000b80000 R09: 0000000000000000
      [    0.948130] R10: ffff883f7fcc3d78 R11: 000000000de27121 R12: 0000000000000002
      [    0.948131] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000
      [    0.948132] FS:  0000000000000000(0000) GS:ffff883f7fcc0000(0000) knlGS:0000000000000000
      [    0.948134] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      [    0.948135] CR2: 000000c424c77000 CR3: 0000000002010005 CR4: 00000000003606e0
      [    0.948136] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
      [    0.948137] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
      [    0.948138] Call Trace:
      [    0.948139]  <IRQ>
      [    0.948142]  do_raw_spin_lock+0xad/0xc0
      [    0.948145]  _raw_spin_lock_irqsave+0x44/0x4b
      [    0.948149]  ? __wake_up_common_lock+0x53/0x90
      [    0.948150]  __wake_up_common_lock+0x53/0x90
      [    0.948155]  wbt_done+0x7b/0xa0
      [    0.948158]  blk_mq_free_request+0xb7/0x110
      [    0.948161]  __blk_mq_complete_request+0xcb/0x140
      [    0.948166]  nvme_process_cq+0xce/0x1a0 [nvme]
      [    0.948169]  nvme_irq+0x23/0x50 [nvme]
      [    0.948173]  __handle_irq_event_percpu+0x46/0x300
      [    0.948176]  handle_irq_event_percpu+0x20/0x50
      [    0.948179]  handle_irq_event+0x34/0x60
      [    0.948181]  handle_edge_irq+0x77/0x190
      [    0.948185]  handle_irq+0xaf/0x120
      [    0.948188]  do_IRQ+0x53/0x110
      [    0.948191]  common_interrupt+0x87/0x87
      [    0.948192]  </IRQ>
      ....
      [    0.311136] CPU: 4 PID: 9737 Comm: run_linux_amd64 Not tainted 4.14.51-62.38.amzn1.x86_64 #1
      [    0.311137] Hardware name: Amazon EC2 i3.metal/Not Specified, BIOS 1.0 10/16/2017
      [    0.311138] task: ffff883f6e6a8000 task.stack: ffffc9000f1ec000
      [    0.311141] RIP: 0010:native_queued_spin_lock_slowpath+0xf5/0x1a0
      [    0.311142] RSP: 0018:ffffc9000f1efa28 EFLAGS: 00000046
      [    0.311144] RAX: 0000000000000000 RBX: ffff887f7709ca68 RCX: ffff883f7f722a00
      [    0.311145] RDX: 0000000000000035 RSI: 0000000000d80001 RDI: ffff887f7709ca68
      [    0.311146] RBP: 0000000000000202 R08: 0000000000140000 R09: 0000000000000000
      [    0.311147] R10: ffffc9000f1ef9d8 R11: 000000001a249fa0 R12: ffff887f7709ca68
      [    0.311148] R13: ffffc9000f1efad0 R14: 0000000000000000 R15: ffff887f7709ca00
      [    0.311149] FS:  000000c423f30090(0000) GS:ffff883f7f700000(0000) knlGS:0000000000000000
      [    0.311150] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      [    0.311151] CR2: 00007feefcea4000 CR3: 0000007f7016e001 CR4: 00000000003606e0
      [    0.311152] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
      [    0.311153] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
      [    0.311154] Call Trace:
      [    0.311157]  do_raw_spin_lock+0xad/0xc0
      [    0.311160]  _raw_spin_lock_irqsave+0x44/0x4b
      [    0.311162]  ? prepare_to_wait_exclusive+0x28/0xb0
      [    0.311164]  prepare_to_wait_exclusive+0x28/0xb0
      [    0.311167]  wbt_wait+0x127/0x330
      [    0.311169]  ? finish_wait+0x80/0x80
      [    0.311172]  ? generic_make_request+0xda/0x3b0
      [    0.311174]  blk_mq_make_request+0xd6/0x7b0
      [    0.311176]  ? blk_queue_enter+0x24/0x260
      [    0.311178]  ? generic_make_request+0xda/0x3b0
      [    0.311181]  generic_make_request+0x10c/0x3b0
      [    0.311183]  ? submit_bio+0x5c/0x110
      [    0.311185]  submit_bio+0x5c/0x110
      [    0.311197]  ? __ext4_journal_stop+0x36/0xa0 [ext4]
      [    0.311210]  ext4_io_submit+0x48/0x60 [ext4]
      [    0.311222]  ext4_writepages+0x810/0x11f0 [ext4]
      [    0.311229]  ? do_writepages+0x3c/0xd0
      [    0.311239]  ? ext4_mark_inode_dirty+0x260/0x260 [ext4]
      [    0.311240]  do_writepages+0x3c/0xd0
      [    0.311243]  ? _raw_spin_unlock+0x24/0x30
      [    0.311245]  ? wbc_attach_and_unlock_inode+0x165/0x280
      [    0.311248]  ? __filemap_fdatawrite_range+0xa3/0xe0
      [    0.311250]  __filemap_fdatawrite_range+0xa3/0xe0
      [    0.311253]  file_write_and_wait_range+0x34/0x90
      [    0.311264]  ext4_sync_file+0x151/0x500 [ext4]
      [    0.311267]  do_fsync+0x38/0x60
      [    0.311270]  SyS_fsync+0xc/0x10
      [    0.311272]  do_syscall_64+0x6f/0x170
      [    0.311274]  entry_SYSCALL_64_after_hwframe+0x42/0xb7
      
      In the original patch, wbt_done is waking up all the exclusive
      processes in the wait queue, which can cause a thundering herd
      if there is a large number of writer threads in the queue. The
      original intention of the code seems to be to wake up one thread
      only however, it uses wake_up_all() in __wbt_done(), and then
      uses the following check in __wbt_wait to have only one thread
      actually get out of the wait loop:
      
      if (waitqueue_active(&rqw->wait) &&
                  rqw->wait.head.next != &wait->entry)
                      return false;
      
      The problem with this is that the wait entry in wbt_wait is
      define with DEFINE_WAIT, which uses the autoremove wakeup function.
      That means that the above check is invalid - the wait entry will
      have been removed from the queue already by the time we hit the
      check in the loop.
      
      Secondly, auto-removing the wait entries also means that the wait
      queue essentially gets reordered "randomly" (e.g. threads re-add
      themselves in the order they got to run after being woken up).
      Additionally, new requests entering wbt_wait might overtake requests
      that were queued earlier, because the wait queue will be
      (temporarily) empty after the wake_up_all, so the waitqueue_active
      check will not stop them. This can cause certain threads to starve
      under high load.
      
      The fix is to leave the woken up requests in the queue and remove
      them in finish_wait() once the current thread breaks out of the
      wait loop in __wbt_wait. This will ensure new requests always
      end up at the back of the queue, and they won't overtake requests
      that are already in the wait queue. With that change, the loop
      in wbt_wait is also in line with many other wait loops in the kernel.
      Waking up just one thread drastically reduces lock contention, as
      does moving the wait queue add/remove out of the loop.
      
      A significant drop in lockdep's lock contention numbers is seen when
      running the test application on the patched kernel.
      Signed-off-by: default avatarAnchal Agarwal <anchalag@amazon.com>
      Signed-off-by: default avatarFrank van der Linden <fllinden@amazon.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      2887e41b
    • Christoph Hellwig's avatar
      target/loop: depend on SCSI · e33e5c85
      Christoph Hellwig authored
      The target loopback driver is a low-level driver for the SCSI subsystem,
      and as such needs to depend on it.
      
      Fixes: 8a39a047 ("target: don't depend on SCSI")
      Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      Reported-by: default avatarRandy Dunlap <rdunlap@infradead.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      e33e5c85
  4. 06 Aug, 2018 4 commits
  5. 02 Aug, 2018 13 commits
  6. 01 Aug, 2018 4 commits
  7. 31 Jul, 2018 1 commit
  8. 30 Jul, 2018 4 commits