- 22 Sep, 2010 3 commits
-
-
Changli Gao authored
ip_route_me_harder can't create the route cache when the outdev is the same with the indev for the skbs whichout a valid protocol set. __mkroute_input functions has this check: 1998 if (skb->protocol != htons(ETH_P_IP)) { 1999 /* Not IP (i.e. ARP). Do not create route, if it is 2000 * invalid for proxy arp. DNAT routes are always valid. 2001 * 2002 * Proxy arp feature have been extended to allow, ARP 2003 * replies back to the same interface, to support 2004 * Private VLAN switch technologies. See arp.c. 2005 */ 2006 if (out_dev == in_dev && 2007 IN_DEV_PROXY_ARP_PVLAN(in_dev) == 0) { 2008 err = -EINVAL; 2009 goto cleanup; 2010 } 2011 } This patch gives the new skb a valid protocol to bypass this check. In order to make ipt_REJECT work with bridges, you also need to enable ip_forward. This patch also fixes a regression. When we used skb_copy_expand(), we didn't have this issue stated above, as the protocol was properly set. Signed-off-by:Changli Gao <xiaosuo@gmail.com> Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Simon Horman authored
I initially noticed this because of the compiler warning below, but it does seem to be a valid concern in the case where ct_sip_get_header() returns 0 in the first iteration of the while loop. net/netfilter/nf_conntrack_sip.c: In function 'sip_help_tcp': net/netfilter/nf_conntrack_sip.c:1379: warning: 'ret' may be used uninitialized in this function Signed-off-by:
Simon Horman <horms@verge.net.au> [Patrick: changed NF_DROP to NF_ACCEPT] Signed-off-by:
-
Eric Dumazet authored
transparent field of a socket is either inet_twsk(sk)->tw_transparent for timewait sockets, or inet_sk(sk)->transparent for other sockets (TCP/UDP). Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Acked-by:
-
- 21 Sep, 2010 4 commits
-
-
Eric Dumazet authored
Special care should be taken when slow path is hit in ip_fragment() : When walking through frags, we transfert truesize ownership from skb to frags. Then if we hit a slow_path condition, we must undo this or risk uncharging frags->truesize twice, and in the end, having negative socket sk_wmem_alloc counter, or even freeing socket sooner than expected. Many thanks to Nick Bowler, who provided a very clean bug report and test program. Thanks to Jarek for reviewing my first patch and providing a V2 While Nick bisection pointed to commit 2b85a34e (net: No more expensive sock_hold()/sock_put() on each tx), underlying bug is older (2.6.12-rc5) A side effect is to extend work done in commit b2722b1c (ip_fragment: also adjust skb->truesize for packets not owned by a socket) to ipv6 as well. Reported-and-bisected-by:
Nick Bowler <nbowler@elliptictech.com> Tested-by:
-
Eric Dumazet authored
skb->truesize is set in core network. Dont change it unless dealing with fragments. Signed-off-by:
-
Eric Dumazet authored
skb->truesize is set in core network. Dont change it unless dealing with fragments. Signed-off-by:
-
-
- 20 Sep, 2010 6 commits
-
-
Tom Marshall authored
If a RST comes in immediately after checking sk->sk_err, tcp_poll will return POLLIN but not POLLOUT. Fix this by checking sk->sk_err at the end of tcp_poll. Additionally, ensure the correct order of operations on SMP machines with memory barriers. Signed-off-by:
Tom Marshall <tdm.code@gmail.com> Signed-off-by:
-
David S. Miller authored
Just use explicit casts, since we really can't change the types of structures exported to userspace which have been around for 15 years or so. Reported-by:
Dan Rosenberg <dan.j.rosenberg@gmail.com> Signed-off-by:
-
-
Thomas Egerer authored
The family parameter xfrm_state_find is used to find a state matching a certain policy. This value is set to the template's family (encap_family) right before xfrm_state_find is called. The family parameter is however also used to construct a temporary state in xfrm_state_find itself which is wrong for inter-family scenarios because it produces a selector for the wrong family. Since this selector is included in the xfrm_user_acquire structure, user space programs misinterpret IPv6 addresses as IPv4 and vice versa. This patch splits up the original init_tempsel function into a part that initializes the selector respectively the props and id of the temporary state, to allow for differing ip address families whithin the state. Signed-off-by:
Thomas Egerer <thomas.egerer@secunet.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Johannes Berg authored
When a driver doesn't fill the entire buffer, old heap contents may remain, and if it also doesn't update the length properly, this old heap content will be copied back to userspace. It is very unlikely that this happens in any of the drivers using private ioctls since it would show up as junk being reported by iwpriv, but it seems better to be safe here, so use kzalloc. Reported-by:
Jeff Mahoney <jeffm@suse.com> Cc: stable@kernel.org Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Eric Dumazet authored
ipv6 can be a module, we should test CONFIG_IPV6 and CONFIG_IPV6_MODULE to enable ipv6 bits in ip_gre. Signed-off-by:
-
- 18 Sep, 2010 2 commits
-
-
Eric Dumazet authored
qlcnic driver allocates rx skbs and gives to hardware too bytes of extra storage, allowing for corruption of kernel data. NET_IP_ALIGN being 0 on some platforms (including x86), drivers should not assume it's 2. rds_ring->skb_size = rds_ring->dma_size + NET_IP_ALIGN; ... skb = dev_alloc_skb(rds_ring->skb_size); skb_reserve(skb, 2); pci_map_single(pdev, skb->data, rds_ring->dma_size, PCI_DMA_FROMDEVICE); (and rds_ring->skb_size == rds_ring->dma_size) -> bug Because of extra alignment (1500 + 32) -> four extra bytes are available before the struct skb_shared_info, so corruption is not noticed. Note: this driver could use netdev_alloc_skb_ip_align() Signed-off-by:
-
Sosnowski, Maciej authored
Direct Cache Access is not supported on IOAT ver.3.0 multiple-IOH platforms. This patch blocks registering of dca providers when multiple IOH detected with IOAT ver.3.0. Signed-off-by:
Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by:
-
- 17 Sep, 2010 9 commits
-
-
Herbert Xu authored
We cannot use rcu_dereference_bh safely in netpoll_rx as we may be called with IRQs disabled. We could however simply disable IRQs as that too causes BH to be disabled and is safe in either case. Thanks to John Linville for discovering this bug and providing a patch. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Vlad Yasevich authored
sctp_packet_config() is called when getting the packet ready for appending of chunks. The function should not touch the current state, since it's possible to ping-pong between two transports when sending, and that can result packet corruption followed by skb overlfow crash. Reported-by:
Thomas Dreibholz <dreibh@iem.uni-due.de> Signed-off-by:
Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by:
-
Wey-Yi Guy authored
When uCode error condition detected, driver try to perform either rf reset or firmware reload in order bring device back to working condition. If rf reset is required and scan is in process, there is no need to issue rf reset since scan already reset the rf. If firmware reload is required and scan is in process, skip the reload request. There is a possibility firmware reload during scan cause problem. [ 485.804046] WARNING: at net/mac80211/main.c:310 ieee80211_restart_hw+0x28/0x62() [ 485.804049] Hardware name: Latitude E6400 [ 485.804052] ieee80211_restart_hw called with hardware scan in progress [ 485.804054] Modules linked in: iwlagn iwlcore bnep sco rfcomm l2cap crc16 bluetooth [last unloaded: iwlcore] [ 485.804069] Pid: 812, comm: kworker/u:3 Tainted: G W 2.6.36-rc3-wl+ #74 [ 485.804072] Call Trace: [ 485.804079] [<c103019a>] warn_slowpath_common+0x60/0x75 [ 485.804084] [<c1030213>] warn_slowpath_fmt+0x26/0x2a [ 485.804089] [<c145da67>] ieee80211_restart_hw+0x28/0x62 [ 485.804102] [<f8b35dc6>] iwl_bg_restart+0x113/0x150 [iwlagn] [ 485.804108] [<c10415d5>] process_one_work+0x181/0x25c [ 485.804119] [<f8b35cb3>] ? iwl_bg_restart+0x0/0x150 [iwlagn] [ 485.804124] [<c104190a>] worker_thread+0xf9/0x1f2 [ 485.804128] [<c1041811>] ? worker_thread+0x0/0x1f2 [ 485.804133] [<c10451b0>] kthread+0x64/0x69 [ 485.804137] [<c104514c>] ? kthread+0x0/0x69 [ 485.804141] [<c1002df6>] kernel_thread_helper+0x6/0x10 [ 485.804145] ---[ end trace 3d4ebdc02d524bbb ]--- [ 485.804148] WG> 1 [ 485.804153] Pid: 812, comm: kworker/u:3 Tainted: G W 2.6.36-rc3-wl+ #74 [ 485.804156] Call Trace: [ 485.804161] [<c145da9b>] ? ieee80211_restart_hw+0x5c/0x62 [ 485.804172] [<f8b35dcb>] iwl_bg_restart+0x118/0x150 [iwlagn] [ 485.804177] [<c10415d5>] process_one_work+0x181/0x25c [ 485.804188] [<f8b35cb3>] ? iwl_bg_restart+0x0/0x150 [iwlagn] [ 485.804192] [<c104190a>] worker_thread+0xf9/0x1f2 [ 485.804197] [<c1041811>] ? worker_thread+0x0/0x1f2 [ 485.804201] [<c10451b0>] kthread+0x64/0x69 [ 485.804205] [<c104514c>] ? kthread+0x0/0x69 [ 485.804209] [<c1002df6>] kernel_thread_helper+0x6/0x10 Signed-off-by:Wey-Yi Guy <wey-yi.w.guy@intel.com>
-
Dan Carpenter authored
If the alloc_skb() fails then we return 65431 instead of -ENOBUFS (-105). Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Chris Snook authored
The atlx drivers are sufficiently mature that we no longer need a separate mailing list for them. Move the discussion to netdev, so we can decommission atl1-devel, which is now mostly spam. Signed-off-by:
Chris Snook <chris.snook@gmail.com> Signed-off-by:
-
Dan Rosenberg authored
Fixed formatting (tabs and line breaks). The CHELSIO_GET_QSET_NUM device ioctl allows unprivileged users to read 4 bytes of uninitialized stack memory, because the "addr" member of the ch_reg struct declared on the stack in cxgb_extension_ioctl() is not altered or zeroed before being copied back to the user. This patch takes care of it. Signed-off-by:
-
Dan Rosenberg authored
Fixed formatting (tabs and line breaks). The EQL_GETMASTRCFG device ioctl allows unprivileged users to read 16 bytes of uninitialized stack memory, because the "master_name" member of the master_config_t struct declared on the stack in eql_g_master_cfg() is not altered or zeroed before being copied back to the user. This patch takes care of it. Signed-off-by:
-
Dan Rosenberg authored
Fixed formatting (tabs and line breaks). The TIOCGICOUNT device ioctl allows unprivileged users to read uninitialized stack memory, because the "reserved" member of the serial_icounter_struct struct declared on the stack in hso_get_count() is not altered or zeroed before being copied back to the user. This patch takes care of it. Signed-off-by:
-
Eric Dumazet authored
ip_local_out() is called with rcu_read_lock() held from ip_queue_xmit() but not from other call sites. Reported-and-bisected-by:
-
- 16 Sep, 2010 1 commit
-
-
Matthew Garrett authored
The Thinkpad X100e seems to have some odd behaviour when the display is powered off - the onboard r8169 starts generating rxfifo overflow errors. The root cause of this has not yet been identified and may well be a hardware design bug on the platform, but r8169 should be more resiliant to this. This patch enables the rxfifo interrupt on 8168 devices and removes the MAC version check in the interrupt handler, and the machine no longer crashes when under network load while the screen turns off. Signed-off-by:
Matthew Garrett <mjg@redhat.com> Acked-by:
Francois Romieu <romieu@fr.zoreil.com> Signed-off-by:
-
- 15 Sep, 2010 3 commits
-
-
Denis Kirjanov authored
There is no need to use spinlocks in vortex_{set|get}_wol. This also fixes a bug: [ 254.214993] 3c59x 0000:00:0d.0: PME# enabled [ 254.215021] BUG: sleeping function called from invalid context at kernel/mutex.c:94 [ 254.215030] in_atomic(): 0, irqs_disabled(): 1, pid: 4875, name: ethtool [ 254.215042] Pid: 4875, comm: ethtool Tainted: G W 2.6.36-rc3+ #7 [ 254.215049] Call Trace: [ 254.215050] [] __might_sleep+0xb1/0xb6 [ 254.215050] [] mutex_lock+0x17/0x30 [ 254.215050] [] acpi_enable_wakeup_device_power+0x2b/0xb1 [ 254.215050] [] acpi_pm_device_sleep_wake+0x42/0x7f [ 254.215050] [] acpi_pci_sleep_wake+0x5d/0x63 [ 254.215050] [] platform_pci_sleep_wake+0x1d/0x20 [ 254.215050] [] __pci_enable_wake+0x90/0xd0 [ 254.215050] [] acpi_set_WOL+0x8e/0xf5 [3c59x] [ 254.215050] [] vortex_set_wol+0x4e/0x5e [3c59x] [ 254.215050] [] dev_ethtool+0x1cf/0xb61 [ 254.215050] [] ? debug_mutex_free_waiter+0x45/0x4a [ 254.215050] [] ? __mutex_lock_common+0x204/0x20e [ 254.215050] [] ? __mutex_lock_slowpath+0x12/0x15 [ 254.215050] [] ? mutex_lock+0x23/0x30 [ 254.215050] [] dev_ioctl+0x42c/0x533 [ 254.215050] [] ? _cond_resched+0x8/0x1c [ 254.215050] [] ? lock_page+0x1c/0x30 [ 254.215050] [] ? page_address+0x15/0x7c [ 254.215050] [] ? filemap_fault+0x187/0x2c4 [ 254.215050] [] sock_ioctl+0x1d4/0x1e0 [ 254.215050] [] ? sock_ioctl+0x0/0x1e0 [ 254.215050] [] vfs_ioctl+0x19/0x33 [ 254.215050] [] do_vfs_ioctl+0x424/0x46f [ 254.215050] [] ? selinux_file_ioctl+0x3c/0x40 [ 254.215050] [] sys_ioctl+0x40/0x5a [ 254.215050] [] sysenter_do_call+0x12/0x22 vortex_set_wol protected with a spinlock, but nested acpi_set_WOL acquires a mutex inside atomic context. Ethtool operations are already serialized by RTNL mutex, so it is safe to drop the locks. Signed-off-by:Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by:
-
Alexey Kuznetsov authored
If peer uses tiny MSS (say, 75 bytes) and similarly tiny advertised window, the SWS logic will packetize to half the MSS unnecessarily. This causes problems with some embedded devices. However for large MSS devices we do want to half-MSS packetize otherwise we never get enough packets into the pipe for things like fast retransmit and recovery to work. Be careful also to handle the case where MSS > window, otherwise we'll never send until the probe timer. Reported-by:
ツ Leandro Melo de Sales <leandroal@gmail.com> Signed-off-by:
-
David S. Miller authored
You cannot invoke __smp_call_function_single() unless the architecture sets this symbol. Reported-by:
Daniel Hellstrom <daniel@gaisler.com> Signed-off-by:
-
- 14 Sep, 2010 5 commits
-
-
Simon Guinot authored
On resume, before starting the PAL state machine, check if the adjust_link() method is well supplied. If not, this would lead to a NULL pointer dereference in the phy_state_machine() function. This scenario can happen if the Ethernet driver call manually the PHY functions instead of using the PAL state machine. The mv643xx_eth driver is a such example. Signed-off-by:
Simon Guinot <sguinot@lacie.com> Signed-off-by:
-
Eric Dumazet authored
netdev_wait_allrefs() waits that all references to a device vanishes. It currently uses a _very_ pessimistic 250 ms delay between each probe. Some users reported that no more than 4 devices can be dismantled per second, this is a pretty serious problem for some setups. Most of the time, a refcount is about to be released by an RCU callback, that is still in flight because rollback_registered_many() uses a synchronize_rcu() call instead of rcu_barrier(). Problem is visible if number of online cpus is one, because synchronize_rcu() is then a no op. time to remove 50 ipip tunnels on a UP machine : before patch : real 11.910s after patch : real 1.250s Reported-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Reported-by:
Octavian Purdila <opurdila@ixiacom.com> Reported-by:
Benjamin LaHaise <bcrl@kvack.org> Signed-off-by:
-
Andy Gospodarek authored
It was recently brought to my attention that 802.3ad mode bonds would no longer form when using some network hardware after a driver update. After snooping around I realized that the particular hardware was using page-based skbs and found that skb->data did not contain a valid LACPDU as it was not stored there. That explained the inability to form an 802.3ad-based bond. For balance-alb mode bonds this was also an issue as ARPs would not be properly processed. This patch fixes the issue in my tests and should be applied to 2.6.36 and as far back as anyone cares to add it to stable. Thanks to Alexander Duyck <alexander.h.duyck@intel.com> and Jesse Brandeburg <jesse.brandeburg@intel.com> for the suggestions on this one. Signed-off-by:
Andy Gospodarek <andy@greyhouse.net> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: stable@kerne.org Signed-off-by:
Jay Vosburgh <fubar@us.ibm.com> Signed-off-by:
-
Michael S. Tsirkin authored
In mergeable buffer case, we use headcount, log_num and seg as indexes in same-size arrays, and we know that headcount <= seg and log_num equals either 0 or seg. Therefore, the right thing to do is range-check seg, not headcount as we do now: these will be different if guest chains s/g descriptors (this does not happen now, but we can not trust the guest). Long term, we should add BUG_ON checks to verify two other indexes are what we think they should be. Reported-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com>
-
Michael Kerrisk authored
While integrating your man-pages patch for IP_NODEFRAG, I noticed that this option is settable by setsockopt(), but not gettable by getsockopt(). I suppose this is not intended. The (untested, trivial) patch below adds getsockopt() support. Signed-off-by:
Michael kerrisk <mtk.manpages@gmail.com> Acked-by:
Jiri Olsa <jolsa@redhat.com> Signed-off-by:
-
- 13 Sep, 2010 3 commits
-
-
Bob Arendt authored
After all these years, it turns out that the /proc/sys/net/ipv4/conf/*/force_igmp_version parameter isn't fully implemented. *Symptom*: When set force_igmp_version to a value of 2, the kernel should only perform multicast IGMPv2 operations (IETF rfc2236). An host-initiated Join message will be sent as a IGMPv2 Join message. But if a IGMPv3 query message is received, the host responds with a IGMPv3 join message. Per rfc3376 and rfc2236, a IGMPv2 host should treat a IGMPv3 query as a IGMPv2 query and respond with an IGMPv2 Join message. *Consequences*: This is an issue when a IGMPv3 capable switch is the querier and will only issue IGMPv3 queries (which double as IGMPv2 querys) and there's an intermediate switch that is only IGMPv2 capable. The intermediate switch processes the initial v2 Join, but fails to recognize the IGMPv3 Join responses to the Query, resulting in a dropped connection when the intermediate v2-only switch times it out. *Identifying issue in the kernel source*: The issue is in this section of code (in net/ipv4/igmp.c), which is called when an IGMP query is received (from mainline 2.6.36-rc3 gitweb): ... A IGMPv3 query has a length >= 12 and no sources. This routine will exit after line 880, setting the general query timer (random timeout between 0 and query response time). This calls igmp_gq_timer_expire(): ... .. which only sends a v3 response. So if a v3 query is received, the kernel always sends a v3 response. IGMP queries happen once every 60 sec (per vlan), so the traffic is low. A IGMPv3 query *is* a strict superset of a IGMPv2 query, so this patch properly short circuit's the v3 behaviour. One issue is that this does not address force_igmp_version=1. Then again, I've never seen any IGMPv1 multicast equipment in the wild. However there is a lot of v2-only equipment. If it's necessary to support the IGMPv1 case as well: 837 if (len == 8 || IGMP_V2_SEEN(in_dev) || IGMP_V1_SEEN(in_dev)) { Signed-off-by: -
Dan Carpenter authored
Smatch complains because we check whether "pch->chan" is NULL and then dereference it unconditionally on the next line. Partly the reason this bug was introduced is because code was too complicated. I've simplified it a little. Signed-off-by:
-
Dan Carpenter authored
The members of struct llc_sock are unsigned so if we pass a negative value for "opt" it can cause a sign bug. Also it can cause an integer overflow when we multiply "opt * HZ". CC: stable@kernel.org Signed-off-by:
-
- 12 Sep, 2010 1 commit
-
-
David S. Miller authored
The list_head conversion unearther an unnecessary flow check. Since flow is always NULL here we don't need to see if a matching flow exists already. Reported-by:
Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
-
- 10 Sep, 2010 3 commits
-
-
-
Dan Williams authored
The 'wwan' devtype is meant for devices that require preconfiguration and *every* time setup before the ethernet interface can be used, like cellular modems which require a series of setup commands on serial ports or other mechanisms before the ethernet interface will handle packets. As ipheth only requires one-per-hotplug pairing setup with no preconfiguration (like APN, phone #, etc) and the network interface is usable at any time after that initial setup, remove the incorrect devtype wwan. Signed-off-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
-
Joe Perches authored
Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
