1. 30 Apr, 2012 6 commits
    • Jim Cromie's avatar
      dynamic_debug: make dynamic-debug work for module initialization · b48420c1
      Jim Cromie authored
      This introduces a fake module param $module.dyndbg.  Its based upon
      Thomas Renninger's $module.ddebug boot-time debugging patch from
      https://lkml.org/lkml/2010/9/15/397
      
      The 'fake' module parameter is provided for all modules, whether or
      not they need it.  It is not explicitly added to each module, but is
      implemented in callbacks invoked from parse_args.
      
      For builtin modules, dynamic_debug_init() now directly calls
      parse_args(..., &ddebug_dyndbg_boot_params_cb), to process the params
      undeclared in the modules, just after the ddebug tables are processed.
      
      While its slightly weird to reprocess the boot params, parse_args() is
      already called repeatedly by do_initcall_levels().  More importantly,
      the dyndbg queries (given in ddebug_query or dyndbg params) cannot be
      activated until after the ddebug tables are ready, and reusing
      parse_args is cleaner than doing an ad-hoc parse.  This reparse would
      break options like inc_verbosity, but they probably should be params,
      like verbosity=3.
      
      ddebug_dyndbg_boot_params_cb() handles both bare dyndbg (aka:
      ddebug_query) and module-prefixed dyndbg params, and ignores all other
      parameters.  For example, the following will enable pr_debug()s in 4
      builtin modules, in the order given:
      
        dyndbg="module params +p; module aio +p" module.dyndbg=+p pci.dyndbg
      
      For loadable modules, parse_args() in load_module() calls
      ddebug_dyndbg_module_params_cb().  This handles bare dyndbg params as
      passed from modprobe, and errors on other unknown params.
      
      Note that modprobe reads /proc/cmdline, so "modprobe foo" grabs all
      foo.params, strips the "foo.", and passes these to the kernel.
      ddebug_dyndbg_module_params_cb() is again called for the unknown
      params; it handles dyndbg, and errors on others.  The "doing" arg
      added previously contains the module name.
      
      For non CONFIG_DYNAMIC_DEBUG builds, the stub function accepts
      and ignores $module.dyndbg params, other unknowns get -ENOENT.
      
      If no param value is given (as in pci.dyndbg example above), "+p" is
      assumed, which enables all pr_debug callsites in the module.
      
      The dyndbg fake parameter is not shown in /sys/module/*/parameters,
      thus it does not use any resources.  Changes to it are made via the
      control file.
      
      Also change pr_info in ddebug_exec_queries to vpr_info,
      no need to see it all the time.
      Signed-off-by: default avatarJim Cromie <jim.cromie@gmail.com>
      CC: Thomas Renninger <trenn@suse.de>
      CC: Rusty Russell <rusty@rustcorp.com.au>
      Acked-by: default avatarJason Baron <jbaron@redhat.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b48420c1
    • Jim Cromie's avatar
      params: add 3rd arg to option handler callback signature · 9fb48c74
      Jim Cromie authored
      Add a 3rd arg, named "doing", to unknown-options callbacks invoked
      from parse_args(). The arg is passed as:
      
        "Booting kernel" from start_kernel(),
        initcall_level_names[i] from do_initcall_level(),
        mod->name from load_module(), via parse_args(), parse_one()
      
      parse_args() already has the "name" parameter, which is renamed to
      "doing" to better reflect current uses 1,2 above.  parse_args() passes
      it to an altered parse_one(), which now passes it down into the
      unknown option handler callbacks.
      
      The mod->name will be needed to handle dyndbg for loadable modules,
      since params passed by modprobe are not qualified (they do not have a
      "$modname." prefix), and by the time the unknown-param callback is
      called, the module name is not otherwise available.
      
      Minor tweaks:
      
      Add param-name to parse_one's pr_debug(), current message doesnt
      identify the param being handled, add it.
      
      Add a pr_info to print current level and level_name of the initcall,
      and number of registered initcalls at that level.  This adds 7 lines
      to dmesg output, like:
      
         initlevel:6=device, 172 registered initcalls
      
      Drop "parameters" from initcall_level_names[], its unhelpful in the
      pr_info() added above.  This array is passed into parse_args() by
      do_initcall_level().
      
      CC: Rusty Russell <rusty@rustcorp.com.au>
      Signed-off-by: default avatarJim Cromie <jim.cromie@gmail.com>
      Acked-by: default avatarJason Baron <jbaron@redhat.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      9fb48c74
    • Jim Cromie's avatar
      dynamic_debug: fix leading spaces in dynamic_debug.h · 3faa2860
      Jim Cromie authored
      clean up some space-before-tabs problems.
      Signed-off-by: default avatarJim Cromie <jim.cromie@gmail.com>
      Acked-by: default avatarJason Baron <jbaron@redhat.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      3faa2860
    • Jim Cromie's avatar
      dynamic_debug: replace if (verbose) pr_info with macro vpr_info · b8ccd5de
      Jim Cromie authored
      Use vpr_info to declutter code, reduce indenting, and change one
      additional pr_info call in ddebug_exec_queries.
      Signed-off-by: default avatarJim Cromie <jim.cromie@gmail.com>
      Acked-by: default avatarJason Baron <jbaron@redhat.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b8ccd5de
    • Greg Kroah-Hartman's avatar
      Revert "w1: Add 1-wire slave device driver for DS28E04-100" · c0a67209
      Greg Kroah-Hartman authored
      This reverts commit f19420c1.
      
      It contained lots of errors and warnings and shouldn't have ever been
      applied, that was my fault, sorry.
      
      Cc: Markus Franke <markus.franke@s2002.tu-chemnitz.de>
      Cc: Evgeniy Polyakov <zbr@ioremap.net>,
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      c0a67209
    • Chanwoo Choi's avatar
      Extcon: Notify changed state for only one cable to notifee · f4cce696
      Chanwoo Choi authored
      This patch inform the state of only one cable instead of previous data
      including the state of 32 cables to notifee which use
      extcon_register_interest()
      function to monitor whether the specific cable is attachd or detached.
      Signed-off-by: default avatarChanwoo Choi <cw00.choi@samsung.com>
      Signed-off-by: default avatarMyungjoo Ham <myungjoo.ham@samsung.com>
      Signed-off-by: default avatarKyungmin Park <kyungmin.park@samsung.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      f4cce696
  2. 25 Apr, 2012 1 commit
  3. 23 Apr, 2012 3 commits
  4. 20 Apr, 2012 8 commits
  5. 18 Apr, 2012 6 commits
  6. 11 Apr, 2012 2 commits
  7. 09 Apr, 2012 2 commits
  8. 08 Apr, 2012 1 commit
  9. 07 Apr, 2012 11 commits