The pointer delcaration was missing the __free(kfree).

Fixes: ff7c7d9f ("virtio_net: Remove command data from control_buf")
Reported-by: Jens Axboe <axboe@kernel.dk>
Closes: https://lore.kernel.org/netdev/0674ca1b-020f-4f93-94d0-104964566e3f@kernel.dk/Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Tested-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20240509183634.143273-1-danielj@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Clang build brings a warning:

    ../drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:133:12: warning:
    comparison of distinct pointer types ('typeof (tmo_us) *' (aka 'unsigned
    int *') and 'typeof (65535) *' (aka 'int *'))
    [-Wcompare-distinct-pointer-types]
      133 |                 tmo_us = min(tmo_us, BNXT_PTP_QTS_MAX_TMO_US);
          |                          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fix it by specifying proper type for BNXT_PTP_QTS_MAX_TMO_US.

Fixes: 7de3c221 ("bnxt_en: Add a timeout parameter to bnxt_hwrm_port_ts_query()")
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240509151833.12579-1-vadim.fedorenko@linux.devSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pablo neira Ayuso says:

====================
gtp pull request 24-05-07

This v3 includes:
- fix for clang uninitialized variable per Jakub.
- address Smatch and Coccinelle reports per Simon
- remove inline in new IPv6 support per Simon
- fix memleaks in netlink control plane per Simon
-o-

The following patchset contains IPv6 GTP driver support for net-next,
this also includes IPv6 over IPv4 and vice-versa:

Patch #1 removes a unnecessary stack variable initialization in the
         socket routine.

Patch #2 deals with GTP extension headers. This variable length extension
         header to decapsulate packets accordingly. Otherwise, packets are
         dropped when these extension headers are present which breaks
         interoperation with other non-Linux based GTP implementations.

Patch #3 prepares for IPv6 support by moving IPv4 specific fields in PDP
         context objects to a union.

Patch #4 adds IPv6 support while retaining backward compatibility.
         Three new attributes allows to declare an IPv6 GTP tunnel
         GTPA_FAMILY, GTPA_PEER_ADDR6 and GTPA_MS_ADDR6 as well as
         IFLA_GTP_LOCAL6 to declare the IPv6 GTP UDP socket. Up to this
         patch, only IPv6 outer in IPv6 inner is supported.

Patch #5 uses IPv6 address /64 prefix for UE/MS in the inner headers.
         Unlike IPv4, which provides a 1:1 mapping between UE/MS,
         IPv6 tunnel encapsulates traffic for /64 address as specified
         by 3GPP TS. Patch has been split from Patch #4 to highlight
         this behaviour.

Patch #6 passes up IPv6 link-local traffic, such as IPv6 SLAAC, for
         handling to userspace so they are handled as control packets.

Patch #7 prepares to allow for GTP IPv4 over IPv6 and vice-versa by
         moving IP specific debugging out of the function to build
         IPv4 and IPv6 GTP packets.

Patch #8 generalizes TOS/DSCP handling following similar approach as
         in the existing iptunnel infrastructure.

Patch #9 adds a helper function to build an IPv4 GTP packet in the outer
         header.

Patch #10 adds a helper function to build an IPv6 GTP packet in the outer
          header.

Patch #11 adds support for GTP IPv4-over-IPv6 and vice-versa.

Patch #12 allows to use the same TID/TEID (tunnel identifier) for inner
          IPv4 and IPv6 packets for better UE/MS dual stack integration.

This series integrates with the osmocom.org project CI and TTCN-3 test
infrastructure (Oliver Smith) as well as the userspace libgtpnl library.

Thanks to Harald Welte, Oliver Smith and Pau Espin for reviewing and
providing feedback through the osmocom.org redmine platform to make this
happen.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In IPv6, ipv6_rcv_core will parse the hop-by-hop type extension header and increase skb->transport_header by one extension header length.
But if there are more other extension headers like fragment header at this time, the skb->transport_header points to the second extension header,
not the transport layer header or the first extension header.

This will result in the start and nexthdrp variable not pointing to the same position in ipv6frag_thdr_trunced,
and ipv6_skip_exthdr returning incorrect offset and frag_off.Sometimes,the length of the last sharded packet is smaller than the calculated incorrect offset, resulting in packet loss.
We can use network header to offset and calculate the correct position to solve this problem.

Fixes: 9d9e937b (ipv6/netfilter: Discard first fragment not including all headers)
Signed-off-by: Gao Xingwang <gaoxingwang1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

DCCP is going away soon, and had no twsk_unique() method.

We can directly call tcp_twsk_unique() for TCP sockets.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240507164140.940547-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Applications are sensitive to long network latency, particularly
heartbeat monitoring ones. Longer the tx timeout recovery higher the
risk with such applications on a production machines. This patch
remedies, yet honoring device set tx timeout.

Modify watchdog next timeout to be shorter than the device specified.
Compute the next timeout be equal to device watchdog timeout less the
how long ago queue stop had been done. At next watchdog timeout tx
timeout handler is called into if still in stopped state. Either called
or not called, restore the watchdog timeout back to device specified.
Signed-off-by: Praveen Kumar Kannoju <praveen.kannoju@oracle.com>
Link: https://lore.kernel.org/r/20240508133617.4424-1-praveen.kannoju@oracle.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add a simple test for the epoll busy poll ioctls, using the kernel
selftest harness.

This test ensures that the ioctls have the expected return codes and
that the kernel properly gets and sets epoll busy poll parameters.

The test can be expanded in the future to do real busy polling (provided
another machine to act as the client is available).
Signed-off-by: Joe Damato <jdamato@fastly.com>
Link: https://lore.kernel.org/r/20240508184008.48264-1-jdamato@fastly.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Cross-merge networking fixes after downstream PR.

No conflicts.

Adjacent changes:

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
  35d92abf ("net: hns3: fix kernel crash when devlink reload during initialization")
  2a1a1a7b ("net: hns3: add command queue trace for hns3")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from bluetooth and IPsec.

  The bridge patch is actually a follow-up to a recent fix in the same
  area. We have a pending v6.8 AF_UNIX regression; it should be solved
  soon, but not in time for this PR.

  Current release - regressions:

   - eth: ks8851: Queue RX packets in IRQ handler instead of disabling
     BHs

   - net: bridge: fix corrupted ethernet header on multicast-to-unicast

  Current release - new code bugs:

   - xfrm: fix possible bad pointer derferencing in error path

  Previous releases - regressionis:

   - core: fix out-of-bounds access in ops_init

   - ipv6:
      - fix potential uninit-value access in __ip6_make_skb()
      - fib6_rules: avoid possible NULL dereference in fib6_rule_action()

   - tcp: use refcount_inc_not_zero() in tcp_twsk_unique().

   - rtnetlink: correct nested IFLA_VF_VLAN_LIST attribute validation

   - rxrpc: fix congestion control algorithm

   - bluetooth:
      - l2cap: fix slab-use-after-free in l2cap_connect()
      - msft: fix slab-use-after-free in msft_do_close()

   - eth: hns3: fix kernel crash when devlink reload during
     initialization

   - eth: dsa: mv88e6xxx: add phylink_get_caps for the mv88e6320/21
     family

  Previous releases - always broken:

   - xfrm: preserve vlan tags for transport mode software GRO

   - tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets

   - eth: hns3: keep using user config after hardware reset"

* tag 'net-6.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
  net: dsa: mv88e6xxx: read cmode on mv88e6320/21 serdes only ports
  net: dsa: mv88e6xxx: add phylink_get_caps for the mv88e6320/21 family
  net: hns3: fix kernel crash when devlink reload during initialization
  net: hns3: fix port vlan filter not disabled issue
  net: hns3: use appropriate barrier function after setting a bit value
  net: hns3: release PTP resources if pf initialization failed
  net: hns3: change type of numa_node_mask as nodemask_t
  net: hns3: direct return when receive a unknown mailbox message
  net: hns3: using user configure after hardware reset
  net/smc: fix neighbour and rtable leak in smc_ib_find_route()
  ipv6: prevent NULL dereference in ip6_output()
  hsr: Simplify code for announcing HSR nodes timer setup
  ipv6: fib6_rules: avoid possible NULL dereference in fib6_rule_action()
  dt-bindings: net: mediatek: remove wrongly added clocks and SerDes
  rxrpc: Only transmit one ACK per jumbo packet received
  rxrpc: Fix congestion control algorithm
  selftests: test_bridge_neigh_suppress.sh: Fix failures due to duplicate MAC
  ipv6: Fix potential uninit-value access in __ip6_make_skb()
  net: phy: marvell-88q2xxx: add support for Rev B1 and B2
  appletalk: Improve handling of broadcast packets
  ...

Pull ARM fix from Russell King:

 - clear stale KASan stack poison when a CPU resumes

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
  ARM: 9381/1: kasan: clear stale stack poison

Pull dentry leak fix from Al Viro:
 "Dentry leak fix in the qibfs driver that I forgot to send a pull
  request for ;-/

  My apologies - it actually sat in vfs.git#fixes for more than two
  months..."

* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  qibfs: fix dentry leak

Some l2tp providers will use 1701 as origin port and open several
tunnels for the same origin and target. On the Linux side, this
may mean opening several sockets, but then trafic will go to only
one of them, losing the trafic for the tunnel of the other socket
(or leaving it up to userland, consuming a lot of cpu%).

This can also happen when the l2tp provider uses a cluster, and
load-balancing happens to migrate from one origin IP to another one,
for which a socket was already established. Managing reassigning
tunnels from one socket to another would be very hairy for userland.

Lastly, as documented in l2tpconfig(1), as client it may be necessary
to use 1701 as origin port for odd firewalls reasons, which could
prevent from establishing several tunnels to a l2tp server, for the
same reason: trafic would get only on one of the two sockets.

With the V2 protocol it is however easy to route trafic to the proper
tunnel, by looking up the tunnel number in the network namespace. This
fixes the three cases altogether.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20240506215336.1470009-1-samuel.thibault@ens-lyon.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

On the mv88e6320 and 6321 switch family, port 0/1 are serdes only ports.
Modified the mv88e6352_get_port4_serdes_cmode function to pass a port
number since the register set of the 6352 is equal on the 6320/21.
Signed-off-by: Steffen Bätz <steffen@innosonix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20240508072944.54880-3-steffen@innosonix.deSigned-off-by: Paolo Abeni <pabeni@redhat.com>

As of commit de5c9bf4 ("net: phylink: require supported_interfaces to
be filled")
Marvell 88e6320/21 switches fail to be probed:

...
mv88e6085 30be0000.ethernet-1:00: phylink: error: empty supported_interfaces
error creating PHYLINK: -22
...

The problem stems from the use of mv88e6185_phylink_get_caps() to get
the device capabilities.
Since there are serdes only ports 0/1 included, create a new dedicated
phylink_get_caps for the 6320 and 6321 to properly support their
set of capabilities.

Fixes: de5c9bf4 ("net: phylink: require supported_interfaces to be filled")
Signed-off-by: Steffen Bätz <steffen@innosonix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20240508072944.54880-2-steffen@innosonix.deSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Jijie Shao says:

====================
There are some bugfix for the HNS3 ethernet driver
====================

Link: https://lore.kernel.org/r/20240507134224.2646246-1-shaojijie@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The devlink reload process will access the hardware resources,
but the register operation is done before the hardware is initialized.
So, processing the devlink reload during initialization may lead to kernel
crash.

This patch fixes this by registering the devlink after
hardware initialization.

Fixes: cd624299 ("net: hns3: add support for registering devlink for VF")
Fixes: 93305b77 ("net: hns3: fix kernel crash when devlink reload during pf initialization")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

According to hardware limitation, for device support modify
VLAN filter state but not support bypass port VLAN filter,
it should always disable the port VLAN filter. but the driver
enables port VLAN filter when initializing, if there is no
VLAN(except VLAN 0) id added, the driver will disable it
in service task. In most time, it works fine. But there is
a time window before the service task shceduled and net device
being registered. So if user adds VLAN at this time, the driver
will not update the VLAN filter state,  and the port VLAN filter
remains enabled.

To fix the problem, if support modify VLAN filter state but not
support bypass port VLAN filter, set the port vlan filter to "off".

Fixes: 184cd221 ("net: hns3: disable port VLAN filter when support function level VLAN filter control")
Fixes: 2ba30662 ("net: hns3: add support for modify VLAN filter state")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

There is a memory barrier in followed case. When set the port down,
hclgevf_set_timmer will set DOWN in state. Meanwhile, the service task has
different behaviour based on whether the state is DOWN. Thus, to make sure
service task see DOWN, use smp_mb__after_atomic after calling set_bit().

          CPU0                        CPU1
========================== ===================================
hclgevf_set_timer_task()    hclgevf_periodic_service_task()
  set_bit(DOWN,state)         test_bit(DOWN,state)

pf also has this issue.

Fixes: ff200099 ("net: hns3: remove unnecessary work in hclgevf_main")
Fixes: 1c6dfe6f ("net: hns3: remove mailbox and reset work in hclge_main")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

During the PF initialization process, hclge_update_port_info may return an
error code for some reason. At this point,  the ptp initialization has been
completed. To void memory leaks, the resources that are applied by ptp
should be released. Therefore, when hclge_update_port_info returns an error
code, hclge_ptp_uninit is called to release the corresponding resources.

Fixes: eaf83ae5 ("net: hns3: add querying fec ability from firmware")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

It provides nodemask_t to describe the numa node mask in kernel. To
improve transportability, change the type of numa_node_mask as nodemask_t.

Fixes: 38caee9d ("net: hns3: Add support of the HNAE3 framework")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Currently, the driver didn't return when receive a unknown
mailbox message, and continue checking whether need to
generate a response. It's unnecessary and may be incorrect.

Fixes: bb5790b7 ("net: hns3: refactor mailbox response scheme between PF and VF")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

When a reset occurring, it's supposed to recover user's configuration.
Currently, the port info(speed, duplex and autoneg) is stored in hclge_mac
and will be scheduled updated. Consider the case that reset was happened
consecutively. During the first reset, the port info is configured with
a temporary value cause the PHY is reset and looking for best link config.
Second reset start and use pervious configuration which is not the user's.
The specific process is as follows:

+------+               +----+                +----+
| USER |               | PF |                | HW |
+---+--+               +-+--+                +-+--+
    |  ethtool --reset   |                     |
    +------------------->|    reset command    |
    |  ethtool --reset   +-------------------->|
    +------------------->|                     +---+
    |                    +---+                 |   |
    |                    |   |reset currently  |   | HW RESET
    |                    |   |and wait to do   |   |
    |                    |<--+                 |   |
    |                    | send pervious cfg   |<--+
    |                    | (1000M FULL AN_ON)  |
    |                    +-------------------->|
    |                    | read cfg(time task) |
    |                    | (10M HALF AN_OFF)   +---+
    |                    |<--------------------+   | cfg take effect
    |                    |    reset command    |<--+
    |                    +-------------------->|
    |                    |                     +---+
    |                    | send pervious cfg   |   | HW RESET
    |                    | (10M HALF AN_OFF)   |<--+
    |                    +-------------------->|
    |                    | read cfg(time task) |
    |                    |  (10M HALF AN_OFF)  +---+
    |                    |<--------------------+   | cfg take effect
    |                    |                     |   |
    |                    | read cfg(time task) |<--+
    |                    |  (10M HALF AN_OFF)  |
    |                    |<--------------------+
    |                    |                     |
    v                    v                     v

To avoid aboved situation, this patch introduced req_speed, req_duplex,
req_autoneg to store user's configuration and it only be used after
hardware reset and to recover user's configuration

Fixes: f5f2b3e4 ("net: hns3: add support for imp-controlled PHYs")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

In smc_ib_find_route(), the neighbour found by neigh_lookup() and rtable
resolved by ip_route_output_flow() are not released or put before return.
It may cause the refcount leak, so fix it.

Link: https://lore.kernel.org/r/20240506015439.108739-1-guwen@linux.alibaba.com
Fixes: e5c4744c ("net/smc: add SMC-Rv2 connection establishment")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240507125331.2808-1-guwen@linux.alibaba.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Merge tag 'wireless-next-2024-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v6.10

The third, and most likely the last, "new features" pull request for
v6.10 with changes both in stack and in drivers. In ath12k and rtw89
we disabled Wireless Extensions just like with iwlwifi earlier. Wi-Fi
7 devices will not support Wireless Extensions (WEXT) anymore so if
someone is still using the legacy WEXT interface it's time to switch
to nl80211 now!

We merged wireless into wireless-next as we decided not to send a
wireless pull request to v6.9 this late in the cycle. Also an
immutable branch with MHI subsystem was merged to get ath11k and
ath12k hibernation working.

Major changes:

mac80211/cfg80211
 * handle color change per link

mt76
 * mt7921 LED control
 * mt7925 EHT radiotap support
 * mt7920e PCI support

ath12k
 * debugfs support
 * dfs_simulate_radar debugfs file
 * disable Wireless Extensions
 * suspend and hibernation support
 * ACPI support
 * refactoring in preparation of multi-link support

ath11k
 * support hibernation (required changes in qrtr and MHI subsystems)
 * ieee80211-freq-limit Device Tree property support

ath10k
 * firmware-name Device Tree property support

rtw89
 * complete features of new WiFi 7 chip 8922AE including BT-coexistence
   and WoWLAN
 * use BIOS ACPI settings to set TX power and channels
 * disable Wireless Extensios on Wi-Fi 7 devices

iwlwifi
 * block_esr debugfs file
 * support again firmware API 90 (was reverted earlier)
 * provide channel survey information for Automatic Channel Selection (ACS)

* tag 'wireless-next-2024-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (214 commits)
  wifi: mwl8k: initialize cmd->addr[] properly
  wifi: iwlwifi: Ensure prph_mac dump includes all addresses
  wifi: iwlwifi: mvm: don't request statistics in restart
  wifi: iwlwifi: mvm: exit EMLSR if secondary link is not used
  wifi: iwlwifi: mvm: add beacon template version 14
  wifi: iwlwifi: mvm: align UATS naming with firmware
  wifi: iwlwifi: Force SCU_ACTIVE for specific platforms
  wifi: iwlwifi: mvm: record and return channel survey information
  wifi: iwlwifi: mvm: add the firmware API for channel survey
  wifi: iwlwifi: mvm: Fix race in scan completion
  wifi: iwlwifi: mvm: Add a print for invalid link pair due to bandwidth
  wifi: iwlwifi: mvm: add a debugfs for reading EMLSR blocking reasons
  wifi: iwlwifi: mvm: Add active EMLSR blocking reasons prints
  wifi: iwlwifi: bump FW API to 90 for BZ/SC devices
  wifi: iwlwifi: mvm: fix primary link setting
  wifi: iwlwifi: mvm: use already determined cmd_id
  wifi: iwlwifi: mvm: don't reset link selection during restart
  wifi: iwlwifi: Print EMLSR states name
  wifi: iwlwifi: mvm: Block EMLSR when a p2p/softAP vif is active
  wifi: iwlwifi: mvm: fix typo in debug print
  ...
====================

Link: https://lore.kernel.org/r/20240508120726.85A10C113CC@smtp.kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

David Wei says:

====================
netdevsim: add NAPI support

Add NAPI support to netdevsim and register its Rx queues with NAPI
instances. Then add a selftest using the new netdev Python selftest
infra to exercise the existing Netdev Netlink API, specifically the
queue-get API.

This expands test coverage and further fleshes out netdevsim as a test
device. It's still my goal to make it useful for testing things like
flow steering and ZC Rx.
====================

Link: https://lore.kernel.org/r/20240507163228.2066817-1-dw@davidwei.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add a selftest for netdev generic netlink. For now there is only a
single test that exercises the `queue-get` API.

The test works with netdevsim by default or with a real device by
setting NETIF.

Add a timeout param to cmd() since ethtool -L can take a long time on
real devices.
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://lore.kernel.org/r/20240507163228.2066817-3-dw@davidwei.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add NAPI support to netdevim, similar to veth.

* Add a nsim_rq rx queue structure to hold a NAPI instance and a skb
  queue.
* During xmit, store the skb in the peer skb queue and schedule NAPI.
* During napi_poll(), drain the skb queue and pass up the stack.
* Add assoc between rxq and NAPI instance using netif_queue_set_napi().
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Run tools/testing/selftest/net/csum.c as part of drv-net.
This binary covers multiple scenarios, based on arguments given,
for both IPv4 and IPv6:

- Accept UDP correct checksum
- Detect UDP invalid checksum
- Accept TCP correct checksum
- Detect TCP invalid checksum

- Transmit UDP: basic checksum offload
- Transmit UDP: zero checksum conversion

The test direction is reversed between receive and transmit tests, so
that the NIC under test is always the local machine.

In total this adds up to 12 testcases, with more to follow. For
conciseness, I replaced individual functions with a function factory.

Also detect hardware offload feature availability using Ethtool
netlink and skip tests when either feature is off. This need may be
common for offload feature tests and eventually deserving of a thin
wrapper in lib.py.

Missing are the PF_PACKET based send tests ('-P'). These use
virtio_net_hdr to program hardware checksum offload. Which requires
looking up the local MAC address and (harder) the MAC of the next hop.
I'll have to give it some though how to do that robustly and where
that code would belong.

Tested:

        make -C tools/testing/selftests/ \
                TARGETS="drivers/net drivers/net/hw" \
                install INSTALL_PATH=/tmp/ksft
        cd /tmp/ksft

	sudo NETIF=ens4 REMOTE_TYPE=ssh \
		REMOTE_ARGS="root@10.40.0.2" \
		LOCAL_V4="10.40.0.1" \
		REMOTE_V4="10.40.0.2" \
		./run_kselftest.sh -t drivers/net/hw:csum.py
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240507154216.501111-1-willemdebruijn.kernel@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

According to syzbot, there is a chance that ip6_dst_idev()
returns NULL in ip6_output(). Most places in IPv6 stack
deal with a NULL idev just fine, but not here.

syzbot reported:

general protection fault, probably for non-canonical address 0xdffffc00000000bc: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x00000000000005e0-0x00000000000005e7]
CPU: 0 PID: 9775 Comm: syz-executor.4 Not tainted 6.9.0-rc5-syzkaller-00157-g6a30653b #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
 RIP: 0010:ip6_output+0x231/0x3f0 net/ipv6/ip6_output.c:237
Code: 3c 1e 00 49 89 df 74 08 4c 89 ef e8 19 58 db f7 48 8b 44 24 20 49 89 45 00 49 89 c5 48 8d 9d e0 05 00 00 48 89 d8 48 c1 e8 03 <42> 0f b6 04 38 84 c0 4c 8b 74 24 28 0f 85 61 01 00 00 8b 1b 31 ff
RSP: 0018:ffffc9000927f0d8 EFLAGS: 00010202
RAX: 00000000000000bc RBX: 00000000000005e0 RCX: 0000000000040000
RDX: ffffc900131f9000 RSI: 0000000000004f47 RDI: 0000000000004f48
RBP: 0000000000000000 R08: ffffffff8a1f0b9a R09: 1ffffffff1f51fad
R10: dffffc0000000000 R11: fffffbfff1f51fae R12: ffff8880293ec8c0
R13: ffff88805d7fc000 R14: 1ffff1100527d91a R15: dffffc0000000000
FS:  00007f135c6856c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000080 CR3: 0000000064096000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
  NF_HOOK include/linux/netfilter.h:314 [inline]
  ip6_xmit+0xefe/0x17f0 net/ipv6/ip6_output.c:358
  sctp_v6_xmit+0x9f2/0x13f0 net/sctp/ipv6.c:248
  sctp_packet_transmit+0x26ad/0x2ca0 net/sctp/output.c:653
  sctp_packet_singleton+0x22c/0x320 net/sctp/outqueue.c:783
  sctp_outq_flush_ctrl net/sctp/outqueue.c:914 [inline]
  sctp_outq_flush+0x6d5/0x3e20 net/sctp/outqueue.c:1212
  sctp_side_effects net/sctp/sm_sideeffect.c:1198 [inline]
  sctp_do_sm+0x59cc/0x60c0 net/sctp/sm_sideeffect.c:1169
  sctp_primitive_ASSOCIATE+0x95/0xc0 net/sctp/primitive.c:73
  __sctp_connect+0x9cd/0xe30 net/sctp/socket.c:1234
  sctp_connect net/sctp/socket.c:4819 [inline]
  sctp_inet_connect+0x149/0x1f0 net/sctp/socket.c:4834
  __sys_connect_file net/socket.c:2048 [inline]
  __sys_connect+0x2df/0x310 net/socket.c:2065
  __do_sys_connect net/socket.c:2075 [inline]
  __se_sys_connect net/socket.c:2072 [inline]
  __x64_sys_connect+0x7a/0x90 net/socket.c:2072
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Fixes: 778d80be ("ipv6: Add disable_ipv6 sysctl to disable IPv6 operaion on specific interface.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://lore.kernel.org/r/20240507161842.773961-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Up till now the code to start HSR announce timer, which triggers sending
supervisory frames, was assuming that hsr_netdev_notify() would be called
at least twice for hsrX interface. This was required to have different
values for old and current values of network device's operstate.

This is problematic for a case where hsrX interface is already in the
operational state when hsr_netdev_notify() is called, so timer is not
configured to trigger and as a result the hsrX is not sending supervisory
frames to HSR ring.

This error has been discovered when hsr_ping.sh script was run. To be
more specific - for the hsr1 and hsr2 the hsr_netdev_notify() was
called at least twice with different IF_OPER_{LOWERDOWN|DOWN|UP} states
assigned in hsr_check_carrier_and_operstate(hsr). As a result there was
no issue with sending supervisory frames.
However, with hsr3, the notify function was called only once with
operstate set to IF_OPER_UP and timer responsible for triggering
supervisory frames was not fired.

The solution is to use netif_oper_up() and netif_running() helper
functions to assess if network hsrX device is up.
Only then, when the timer is not already pending, it is started.
Otherwise it is deactivated.

Fixes: f421436a ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240507111214.3519800-1-lukma@denx.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

route_dumpit() already relies on RCU, RTNL is not needed.

Also change return value at the end of a dump.
This allows NLMSG_DONE to be appended to the current
skb at the end of a dump, saving a couple of recvmsg()
system calls.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Remi Denis-Courmont <courmisch@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240507121748.416287-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Various ndo_set_config() methods can change dev->if_port

dev->if_port is going to be read locklessly from
rtnl_fill_link_ifmap().

Add corresponding WRITE_ONCE() on writer sides.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240507184144.1230469-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot is able to trigger the following crash [1],
caused by unsafe ip6_dst_idev() use.

Indeed ip6_dst_idev() can return NULL, and must always be checked.

[1]

Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 PID: 31648 Comm: syz-executor.0 Not tainted 6.9.0-rc4-next-20240417-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
 RIP: 0010:__fib6_rule_action net/ipv6/fib6_rules.c:237 [inline]
 RIP: 0010:fib6_rule_action+0x241/0x7b0 net/ipv6/fib6_rules.c:267
Code: 02 00 00 49 8d 9f d8 00 00 00 48 89 d8 48 c1 e8 03 42 80 3c 20 00 74 08 48 89 df e8 f9 32 bf f7 48 8b 1b 48 89 d8 48 c1 e8 03 <42> 80 3c 20 00 74 08 48 89 df e8 e0 32 bf f7 4c 8b 03 48 89 ef 4c
RSP: 0018:ffffc9000fc1f2f0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 1a772f98c8186700
RDX: 0000000000000003 RSI: ffffffff8bcac4e0 RDI: ffffffff8c1f9760
RBP: ffff8880673fb980 R08: ffffffff8fac15ef R09: 1ffffffff1f582bd
R10: dffffc0000000000 R11: fffffbfff1f582be R12: dffffc0000000000
R13: 0000000000000080 R14: ffff888076509000 R15: ffff88807a029a00
FS:  00007f55e82ca6c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b31d23000 CR3: 0000000022b66000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
  fib_rules_lookup+0x62c/0xdb0 net/core/fib_rules.c:317
  fib6_rule_lookup+0x1fd/0x790 net/ipv6/fib6_rules.c:108
  ip6_route_output_flags_noref net/ipv6/route.c:2637 [inline]
  ip6_route_output_flags+0x38e/0x610 net/ipv6/route.c:2649
  ip6_route_output include/net/ip6_route.h:93 [inline]
  ip6_dst_lookup_tail+0x189/0x11a0 net/ipv6/ip6_output.c:1120
  ip6_dst_lookup_flow+0xb9/0x180 net/ipv6/ip6_output.c:1250
  sctp_v6_get_dst+0x792/0x1e20 net/sctp/ipv6.c:326
  sctp_transport_route+0x12c/0x2e0 net/sctp/transport.c:455
  sctp_assoc_add_peer+0x614/0x15c0 net/sctp/associola.c:662
  sctp_connect_new_asoc+0x31d/0x6c0 net/sctp/socket.c:1099
  __sctp_connect+0x66d/0xe30 net/sctp/socket.c:1197
  sctp_connect net/sctp/socket.c:4819 [inline]
  sctp_inet_connect+0x149/0x1f0 net/sctp/socket.c:4834
  __sys_connect_file net/socket.c:2048 [inline]
  __sys_connect+0x2df/0x310 net/socket.c:2065
  __do_sys_connect net/socket.c:2075 [inline]
  __se_sys_connect net/socket.c:2072 [inline]
  __x64_sys_connect+0x7a/0x90 net/socket.c:2072
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Fixes: 5e5f3f0f ("[IPV6] ADDRCONF: Convert ipv6_get_saddr() to ipv6_dev_get_saddr().")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240507163145.835254-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There is no need to use this_cpu_ptr(dst_cache->cache) twice.

Compiler is unable to optimize the second call, because of
per-cpu constraints.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240507132717.627518-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

dst_cache->reset_ts is read or written locklessly,
add READ_ONCE() and WRITE_ONCE() annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240507132000.614591-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Several clocks as well as both sgmiisys phandles were added by mistake
to the Ethernet bindings for MT7988. Also, the total number of clocks
didn't match with the actual number of items listed.

This happened because the vendor driver which served as a reference uses
a high number of syscon phandles to access various parts of the SoC
which wasn't acceptable upstream. Hence several parts which have never
previously been supported (such SerDes PHY and USXGMII PCS) are going to
be implemented by separate drivers. As a result the device tree will
look much more sane.

Quickly align the bindings with the upcoming reality of the drivers
actually adding support for the remaining Ethernet-related features of
the MT7988 SoC.

Fixes: c94a9aab ("dt-bindings: net: mediatek,net: add mt7988-eth binding")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1569290b21cc787a424469ed74456a7e976b102d.1715084326.git.daniel@makrotopia.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add support for retrieving VFs as part of link info. For example:

./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_link.yaml \
  --do getlink --json '{"ifi-index": 38, "ext-mask": ["vf", "skip-stats"]}'
{'address': 'b6:75:91:f2:64:65',
 [snip]
 'vfinfo-list': {'info': [{'broadcast': b'\xff\xff\xff\xff\xff\xff\x00\x00'
                                        b'\x00\x00\x00\x00\x00\x00\x00\x00'
                                        b'\x00\x00\x00\x00\x00\x00\x00\x00'
                                        b'\x00\x00\x00\x00\x00\x00\x00\x00',
                           'link-state': {'link-state': 'auto', 'vf': 0},
                           'mac': {'mac': b'\x00\x00\x00\x00\x00\x00\x00\x00'
                                          b'\x00\x00\x00\x00\x00\x00\x00\x00'
                                          b'\x00\x00\x00\x00\x00\x00\x00\x00'
                                          b'\x00\x00\x00\x00\x00\x00\x00\x00',
                                   'vf': 0},
                           'rate': {'max-tx-rate': 0,
                                    'min-tx-rate': 0,
                                    'vf': 0},
                           'rss-query-en': {'setting': 0, 'vf': 0},
                           'spoofchk': {'setting': 0, 'vf': 0},
                           'trust': {'setting': 0, 'vf': 0},
                           'tx-rate': {'rate': 0, 'vf': 0},
                           'vlan': {'qos': 0, 'vf': 0, 'vlan': 0},
                           'vlan-list': {'info': [{'qos': 0,
                                                   'vf': 0,
                                                   'vlan': 0,
                                                   'vlan-proto': 0}]}},
                          {'broadcast': b'\xff\xff\xff\xff\xff\xff\x00\x00'
                                        b'\x00\x00\x00\x00\x00\x00\x00\x00'
                                        b'\x00\x00\x00\x00\x00\x00\x00\x00'
                                        b'\x00\x00\x00\x00\x00\x00\x00\x00',
                           'link-state': {'link-state': 'auto', 'vf': 1},
                           'mac': {'mac': b'\x00\x00\x00\x00\x00\x00\x00\x00'
                                          b'\x00\x00\x00\x00\x00\x00\x00\x00'
                                          b'\x00\x00\x00\x00\x00\x00\x00\x00'
                                          b'\x00\x00\x00\x00\x00\x00\x00\x00',
                                   'vf': 1},
                           'rate': {'max-tx-rate': 0,
                                    'min-tx-rate': 0,
                                    'vf': 1},
                           'rss-query-en': {'setting': 0, 'vf': 1},
                           'spoofchk': {'setting': 0, 'vf': 1},
                           'trust': {'setting': 0, 'vf': 1},
                           'tx-rate': {'rate': 0, 'vf': 1},
                           'vlan': {'qos': 0, 'vf': 1, 'vlan': 0},
                           'vlan-list': {'info': [{'qos': 0,
                                                   'vf': 1,
                                                   'vlan': 0,
                                                   'vlan-proto': 0}]}}]},
 'xdp': {'attached': 0}}
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240507103603.23017-1-donald.hunter@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add a compatible property specific to IPQ9574. This should be used
along with the IPQ4019 compatible. This second compatible serves the
same purpose as the ipq{5,6,8} compatibles. This is to indicate that
the clocks properties are required.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240507024758.2810514-1-mr.nuke.me@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull smb server fixes from Steve French:
 "Five ksmbd server fixes, all also for stable

   - Three fixes related to SMB3 leases (fixes two xfstests, and a
     locking issue)

   - Unitialized variable fix

   - Socket creation fix when bindv6only is set"

* tag '6.9-rc7-ksmbd-fixes' of git://git.samba.org/ksmbd:
  ksmbd: do not grant v2 lease if parent lease key and epoch are not set
  ksmbd: use rwsem instead of rwlock for lease break
  ksmbd: avoid to send duplicate lease break notifications
  ksmbd: off ipv6only for both ipv4/ipv6 binding
  ksmbd: fix uninitialized symbol 'share' in smb2_tree_connect()

Pull fuse fixes from Miklos Szeredi:
 "Two one-liner fixes for issues introduced in -rc1"

* tag 'fuse-fixes-6.9-final' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  virtiofs: include a newline in sysfs tag
  fuse: verify zero padding in fuse_backing_map