- 24 Mar, 2022 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM driver updates from Arnd Bergmann: "There are a few separately maintained driver subsystems that we merge through the SoC tree, notable changes are: - Memory controller updates, mainly for Tegra and Mediatek SoCs, and clarifications for the memory controller DT bindings - SCMI firmware interface updates, in particular a new transport based on OPTEE and support for atomic operations. - Cleanups to the TEE subsystem, refactoring its memory management For SoC specific drivers without a separate subsystem, changes include - Smaller updates and fixes for TI, AT91/SAMA5, Qualcomm and NXP Layerscape SoCs. - Driver support for Microchip SAMA5D29, Tesla FSD, Renesas RZ/G2L, and Qualcomm SM8450. - Better power management on Mediatek MT81xx, NXP i.MX8MQ and older NVIDIA Tegra chips" * tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (154 commits) ARM: spear: fix typos in comments soc/microchip: fix invalid free in mpfs_sys_controller_delete soc: s4: Add support for power domains controller dt-bindings: power: add Amlogic s4 power domains bindings ARM: at91: add support in soc driver for new SAMA5D29 soc: mediatek: mmsys: add sw0_rst_offset in mmsys driver data dt-bindings: memory: renesas,rpc-if: Document RZ/V2L SoC memory: emif: check the pointer temp in get_device_details() memory: emif: Add check for setup_interrupts dt-bindings: arm: mediatek: mmsys: add support for MT8186 dt-bindings: mediatek: add compatible for MT8186 pwrap soc: mediatek: pwrap: add pwrap driver for MT8186 SoC soc: mediatek: mmsys: add mmsys reset control for MT8186 soc: mediatek: mtk-infracfg: Disable ACP on MT8192 soc: ti: k3-socinfo: Add AM62x JTAG ID soc: mediatek: add MTK mutex support for MT8186 soc: mediatek: mmsys: add mt8186 mmsys routing table soc: mediatek: pm-domains: Add support for mt8186 dt-bindings: power: Add MT8186 power domains soc: mediatek: pm-domains: Add support for mt8195 ... -
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC updates from Arnd Bergmann: "SoC specific code is generally used for older platforms that don't (yet) use device tree to do the same things. - Support is added for i.MXRT10xx, a Cortex-M7 based microcontroller from NXP. At the moment this is still incomplete as other portions are merged through different trees. - Long abandoned support for running NOMMU ARMv4 or ARMv5 platforms gets removed, now the Arm NOMMU platforms are limited to the Cortex-M family of microcontrollers - Two old PXA boards get removed, along with corresponding driver bits. - Continued cleanup of the Intel IXP4xx platforms, removing some remnants of the old board files. - Minor Cleanups and fixes for Orion, PXA, MMP, Mstar, Samsung - CPU idle support for AT91 - A system controller driver for Polarfire" * tag 'arm-soc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits) ARM: remove support for NOMMU ARMv4/v5 ARM: PXA: fix up decompressor code soc: microchip: make mpfs_sys_controller_put static ARM: pxa: remove Intel Imote2 and Stargate 2 boards ARM: mmp: Fix failure to remove sram device ARM: mstar: Select ARM_ERRATA_814220 soc: add microchip polarfire soc system controller ARM: at91: Kconfig: select PM_OPP ARM: at91: PM: add cpu idle support for sama7g5 ARM: at91: ddr: fix typo to align with datasheet naming ARM: at91: ddr: align macro definitions ARM: at91: ddr: remove CONFIG_SOC_SAMA7 dependency ARM: ixp4xx: Convert to SPARSE_IRQ and P2V ARM: ixp4xx: Drop all common code ARM: ixp4xx: Drop custom DMA coherency and bouncing ARM: ixp4xx: Remove feature bit accessors net: ixp4xx_hss: Check features using syscon net: ixp4xx_eth: Drop platform data support soc: ixp4xx-npe: Access syscon regs using regmap soc: ixp4xx: Add features from regmap helper ... -
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM defconfig updates from Arnd Bergmann: "Various updates for the 32-bit and 64-bit defconfig files, mostly to enable additional hardware drivers for more machines, specifically for the Allwinner F1C100, Altera SoCFPGA, Broadcom, Microchip, Qualcomm, Airoha, Tegra, Renesas, and i.NX. The multi_v5_defconfig for older ARMv5 configs gets a rework for Andre Przywara to cleans up the multi_v5_defconfig for some cruft that has accumulated and drivers that got disabled unintentionally, while Anders Roxell makes it more useful for running under Qemu" * tag 'arm-defconfig-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (41 commits) ARM: configs: multi_v5: Enable Allwinner F1C100 ARM: configs: clean up multi_v5_defconfig ARM: configs: multi_v5_defconfig: re-enable DRM_PANEL and FB_xxx ARM: configs: multi_v5_defconfig: re-enable CONFIG_V4L_PLATFORM_DRIVERS ARM: configs: multi_v5_defconfig: remove deleted platforms ARM: defconfig: add SMB347 charger driver for p4note arm: multi_v5: enable configs for versatile arm64: defconfig: enable Layerscape SFP driver ARM: configs: at91: sama7: Unselect CONFIG_DMATEST ARM: configs: at91: add eic arm64: defconfig: enable the CVP driver ARM: multi_v7_defconfig: Add support for Airoha EN7523 SoC ARM: multi_v7_defconfig: Enable BCM23550 and BCM53573 ARM: multi_v7_defconfig: Enable Broadcom STB USB drivers ARM: configs: at91: sama7: add config for cpufreq ARM: configs: at91: sama7: enable cpu idle ARM: configs: at91: sama7: Enable crypto IPs and software algs ARM: configs: at91: sama7: Enable UBIFS_FS ARM: configs: at91: sama7: Enable NAND / SMC arm64: defconfig: tegra: Enable GPCDMA ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-genericLinus Torvalds authored
Pull asm-generic updates from Arnd Bergmann: "There are three sets of updates for 5.18 in the asm-generic tree: - The set_fs()/get_fs() infrastructure gets removed for good. This was already gone from all major architectures, but now we can finally remove it everywhere, which loses some particularly tricky and error-prone code. There is a small merge conflict against a parisc cleanup, the solution is to use their new version. - The nds32 architecture ends its tenure in the Linux kernel. The hardware is still used and the code is in reasonable shape, but the mainline port is not actively maintained any more, as all remaining users are thought to run vendor kernels that would never be updated to a future release. - A series from Masahiro Yamada cleans up some of the uapi header files to pass the compile-time checks" * tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (27 commits) nds32: Remove the architecture uaccess: remove CONFIG_SET_FS ia64: remove CONFIG_SET_FS support sh: remove CONFIG_SET_FS support sparc64: remove CONFIG_SET_FS support lib/test_lockup: fix kernel pointer check for separate address spaces uaccess: generalize access_ok() uaccess: fix type mismatch warnings from access_ok() arm64: simplify access_ok() m68k: fix access_ok for coldfire MIPS: use simpler access_ok() MIPS: Handle address errors for accesses above CPU max virtual user address uaccess: add generic __{get,put}_kernel_nofault nios2: drop access_ok() check from __put_user() x86: use more conventional access_ok() definition x86: remove __range_not_ok() sparc64: add __{get,put}_kernel_nofault() nds32: fix access_ok() checks in get/put_user uaccess: fix nios2 and microblaze get_user_8() sparc64: fix building assembly files ... -
git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM updates from Russell King: "Updates for IRQ stacks and virtually mapped stack support, and ftrace: - Support for IRQ and vmap'ed stacks This covers all the work related to implementing IRQ stacks and vmap'ed stacks for all 32-bit ARM systems that are currently supported by the Linux kernel, including RiscPC and Footbridge. It has been submitted for review in four different waves: - IRQ stacks support for v7 SMP systems [0] - vmap'ed stacks support for v7 SMP systems[1] - extending support for both IRQ stacks and vmap'ed stacks for all remaining configurations, including v6/v7 SMP multiplatform kernels and uniprocessor configurations including v7-M [2] - fixes and updates in [3] - ftrace fixes and cleanups Make all flavors of ftrace available on all builds, regardless of ISA choice, unwinder choice or compiler [4]: - use ADD not POP where possible - fix a couple of Thumb2 related issues - enable HAVE_FUNCTION_GRAPH_FP_TEST for robustness - enable the graph tracer with the EABI unwinder - avoid clobbering frame pointer registers to make Clang happy - Fixes for the above" [0] https://lore.kernel.org/linux-arm-kernel/20211115084732.3704393-1-ardb@kernel.org/ [1] https://lore.kernel.org/linux-arm-kernel/20211122092816.2865873-1-ardb@kernel.org/ [2] https://lore.kernel.org/linux-arm-kernel/20211206164659.1495084-1-ardb@kernel.org/ [3] https://lore.kernel.org/linux-arm-kernel/20220124174744.1054712-1-ardb@kernel.org/ [4] https://lore.kernel.org/linux-arm-kernel/20220203082204.1176734-1-ardb@kernel.org/ * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (62 commits) ARM: fix building NOMMU ARMv4/v5 kernels ARM: unwind: only permit stack switch when unwinding call_with_stack() ARM: Revert "unwind: dump exception stack from calling frame" ARM: entry: fix unwinder problems caused by IRQ stacks ARM: unwind: set frame.pc correctly for current-thread unwinding ARM: 9184/1: return_address: disable again for CONFIG_ARM_UNWIND=y ARM: 9183/1: unwind: avoid spurious warnings on bogus code addresses Revert "ARM: 9144/1: forbid ftrace with clang and thumb2_kernel" ARM: mach-bcm: disable ftrace in SMC invocation routines ARM: cacheflush: avoid clobbering the frame pointer ARM: kprobes: treat R7 as the frame pointer register in Thumb2 builds ARM: ftrace: enable the graph tracer with the EABI unwinder ARM: unwind: track location of LR value in stack frame ARM: ftrace: enable HAVE_FUNCTION_GRAPH_FP_TEST ARM: ftrace: avoid unnecessary literal loads ARM: ftrace: avoid redundant loads or clobbering IP ARM: ftrace: use trampolines to keep .init.text in branching range ARM: ftrace: use ADD not POP to counter PUSH at entry ARM: ftrace: ensure that ADR takes the Thumb bit into account ARM: make get_current() and __my_cpu_offset() __always_inline ...
-
- 23 Mar, 2022 18 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommuLinus Torvalds authored
Pull m68knommu updates from Greg Ungerer: "A few fixes, nothing too exciting. Fix warnings when building for dragen2 targets (sparse and "screen_bits") and ucsimm targets. Fix compilation problems when test compiling for ColdFire targets with the mcf_edma driver enabled. Remove an incorrect clock definition for the ColdFire m5441x. Summary: - fix 'screen_bits' defined but not used - fix ucsimm sparse warnings - fix dragen2 warnings - fix test builds with the mcf_edma driver enabled" * tag 'm68knommu-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: coldfire/device.c: only build for MCF_EDMA when h/w macros are defined m68k: m5441x: remove erroneous clock disable m68knommu: fix ucsimm sparse warnings m68knommu: fix 'screen_bits' defined but not used m68knommu: fix warning: no previous prototype for 'init_dragen2'
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound updates from Takashi Iwai: "It's been a fairly calm development cycle. There are a few last-minute ALSA core fixes, most notably for covering PCM ioctl races, but the most of rest are device-specific changes. Below are some highlights: ALSA core: - Fixes for PCM ioctl races that may lead to UAF - Fix for oversized allocations in PCM OSS layer ASoC: - Start of moving SoF to support multiple IPC mechanisms - Use of NHLT ACPI table to reduce the amount of quirking required for Intel systems - Preliminary works forthcoming Intel AVS driver for legacy Intel DSP firmwares - Support for AMD PDM, Atmel PDMC, Awinic AW8738, i.MX cards with TLV320AIC31xx, Intel machines with CS35L41 and ESSX8336, Mediatek MT8181 wideband bluetooth, nVidia Tegra234, Qualcomm SC7280, Renesas RZ/V2L, Texas Instruments TAS585M HD-audio: - Driver re-binding fix for HD-audio - Updates for Intel ADL and Tegra234, various platform quirks for Dell, HP, Lenovo, ASUS, Samsung and Clevo machines USB-audio: - Quirk updates for Scarlett2, RODE, Corsair devices" * tag 'sound-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (486 commits) ALSA: hda/realtek: Add alc256-samsung-headphone fixup ALSA: pci: fix reading of swapped values from pcmreg in AC97 codec ALSA: pcm: Add stream lock during PCM reset ioctl operations ALSA: pcm: Fix races among concurrent prealloc proc writes ALSA: pcm: Fix races among concurrent prepare and hw_params/hw_free calls ALSA: pcm: Fix races among concurrent read/write and buffer changes ALSA: pcm: Fix races among concurrent hw_params and hw_free calls ASoC: atmel: mchp-pdmc: print the correct property name MAINTAINERS: Add Shengjiu to maintainer list of sound/soc/fsl ASoC: SOF: Add a new dai_get_clk topology IPC op ASoC: SOF: topology: Add ops for setting up and tearing down pipelines ASoC: SOF: expose sof_route_setup() ASoC: SOF: Add dai_link_fixup PCM op for IPC3 ASoC: SOF: Add trigger PCM op for IPC3 ASoC: SOF: Define hw_params PCM op for IPC3 ASoC: SOF: Introduce IPC3 PCM hw_free op ASoC: SOF: pcm: expose the sof_pcm_setup_connected_widgets() function ASoC: SOF: Introduce IPC-specific PCM ops ASoC: SOF: Add bytes_ext control IPC ops for IPC3 ASoC: SOF: Add bytes_get/put control IPC ops for IPC3 ... -
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media updates from Mauro Carvalho Chehab: - a major reorg at platform Kconfig/Makefile files, organizing them per vendor. The other media Kconfig/Makefile files also sorted - New sensor drivers: hi847, isl7998x, ov08d10 - New Amphion vpu decoder stateful driver - New Atmel microchip csi2dc driver - tegra-vde driver promoted from staging - atomisp: some fixes for it to work on BYT - imx7-mipi-csis driver promoted from staging and renamed - camss driver got initial support for VFE hardware version Titan 480 - mtk-vcodec has gained support for MT8192 - lots of driver changes, fixes and improvements * tag 'media/v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (417 commits) media: nxp: Restrict VIDEO_IMX_MIPI_CSIS to ARCH_MXC or COMPILE_TEST media: amphion: cleanup media device if register it fail media: amphion: fix some issues to improve robust media: amphion: fix some error related with undefined reference to __divdi3 media: amphion: fix an issue that using pm_runtime_get_sync incorrectly media: vidtv: use vfree() for memory allocated with vzalloc() media: m5mols/m5mols.h: document new reset field media: pixfmt-yuv-planar.rst: fix PIX_FMT labels media: platform: Remove unnecessary print function dev_err() media: amphion: Add missing of_node_put() in vpu_core_parse_dt() media: mtk-vcodec: Add missing of_node_put() in mtk_vdec_hw_prob_done() media: platform: amphion: Fix build error without MAILBOX media: spi: Kconfig: Place SPI drivers on a single menu media: i2c: Kconfig: move camera drivers to the top media: atomisp: fix bad usage at error handling logic media: platform: rename mediatek/mtk-jpeg/ to mediatek/jpeg/ media: media/*/Kconfig: sort entries media: Kconfig: cleanup VIDEO_DEV dependencies media: platform/*/Kconfig: make manufacturer menus more uniform media: platform: Create vendor/{Makefile,Kconfig} files ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdevLinus Torvalds authored
Pull fbdev updates from Helge Deller: "Lots of small fixes and code cleanups across most of the fbdev drivers. This includes conversions to use helper functions, const conversions, spelling fixes, help text updates, adding return value checks, small build fixes, and much more" * tag 'for-5.18/fbdev-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (59 commits) video: fbdev: kyro: make read-only array ODValues static const video: fbdev: offb: fix warning comparing pointer to 0 video: fbdev: omapfb: Add missing of_node_put() in dvic_probe_of video: fbdev: sm712fb: Fix crash in smtcfb_write() video: fbdev: s3c-fb: fix platform_get_irq.cocci warning video: fbdev: sm712fb: Fix crash in smtcfb_read() video: fbdev: via: check the return value of kstrdup() video: fbdev: au1100fb: Spelling s/palette/palette/ video: fbdev: atari: Atari 2 bpp (STe) palette bugfix video: fbdev: atari: Remove unused atafb_setcolreg() video: fbdev: atari: Convert to standard round_up() helper video: fbdev: atari: Fix TT High video mode video: fbdev: udlfb: replace snprintf in show functions with sysfs_emit video: fbdev: omapfb: panel-tpo-td043mtea1: Use sysfs_emit() instead of snprintf() video: fbdev: omapfb: panel-dsi-cm: Use sysfs_emit() instead of snprintf() video: fbdev: omapfb: Use sysfs_emit() instead of snprintf() video: fbdev: s3c-fb: Use platform_get_irq() to get the interrupt video: fbdev: Fix wrong file path for pvr2fb.c in Kconfig help text video: fbdev: pxa3xx-gcu: Remove unnecessary print function dev_err() video: fbdev: pxa168fb: Remove unnecessary print function dev_err() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC updates from Ulf Hansson: "MMC core: - Convert to sysfs_emit() in favor of sprintf() - Improve fallback to speed modes if eMMC HS200 fails MMC host: - dw_mmc: Allow variants to set minimal supported clock rate - dw-mmc-rockchip: Fix problems with invalid clock rates - litex_mmc: Add new DT based driver for the LiteX's LiteSDCard interface - litex_mmc: Add Gabriel Somlo and Joel Stanley as co-maintainers for LiteX - mtk-sd: Add support for the Mediatek MT8186 variant - renesas_sdhi: Add support for RZ/G2UL variant - renesas_sdhi: Add support for RZ/V2L variant - rtsx_pci: Adjust power-on sequence to conform to the SD spec - sdhci-am654: Add support for TI's AM62 variant - sdhci_am654: Fixup support for TI's AM64 variant - sdhci-esdhc-imx: Add support for the imx93 variant - sdhci-msm: Add support for the msm8953 variant - sdhci-pci-gli: Add support for runtime PM for the GL9763E variant - sdhci-pci-gli: Adjustments of the SSC function for the GL975x variants - sdhci-tegra: Add support for wake on SD card event - sunxi-mmc: Add support for Allwinner's F1c100s variant - sunxi-mmc: Add support for D1 MMC variant" * tag 'mmc-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (37 commits) dt-bindings: mmc: renesas,sdhi: Document RZ/G2UL SoC mmc: tmio: remove outdated members from host struct mmc: mtk-sd: Silence delay phase calculation debug log mmc: davinci_mmc: Handle error for clk_enable mmc: sdhci-pci-gli: Add runtime PM for GL9763E mmc: core: Drop HS400 caps unless 8-bit bus is supported too mmc: host: Return an error when ->enable_sdio_irq() ops is missing mmc: core: Improve fallback to speed modes if eMMC HS200 fails dt-bindings: mmc: sunxi: add Allwinner F1c100s compatible mmc: dw-mmc-rockchip: Fix handling invalid clock rates mmc: dw_mmc: Support setting f_min from host drivers mmc: host: Drop commas after SoC match table sentinels mmc: rtsx: add 74 Clocks in power on flow dt-bindings: mmc: renesas,sdhi: Document RZ/V2L SoC mmc: sh_mmcif: Simplify division/shift logic mmc: sdhci_am654: Add Support for TI's AM62 SoC dt-bindings: mmc: imx-esdhc: Add imx93 compatible string dt-bindings: mmc: sdhci-am654: Add compatible string for AM62 SoC mmc: sdhci_am654: Fix the driver data of AM64 SoC mmc: core: use sysfs_emit() instead of sprintf() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libataLinus Torvalds authored
Pull ata updates from Damien Le Moal: "For this cycle, no big change but many small fixes and code cleanup to libata, the ahci driver and various pata drivers. In more details: - Code simplification in pata_platform using platform_get_mem_or_io(), from Lad. - Fix read-only arrays declarations as const in pata_atiixp and pata_pdc202xx_old, from Colin. - Various cleanups and code simplification in libata-scsi, from me. - Remove dead code in libata-acpi, from Sergey. - Skip device scan deboune delay for Marvell 88SE9235 adapters (ahci) to speedup boot, from Paul. - Simplify functions declaration and use for functions always returning 0 in libata-core, from Sergey. - Non-fatal error fixes and in the pata_hpt366 and pata_hpt3x2n drivers, from Sergey. - Various code cleanup in the pata_artop, pata_hpt37x, pata_hpt366, pata_hpt3x2n, pata_samsung_cf and sata_rcar drivers, from Sergey. - Some libata-sff and libata-scsi code cleanup (e.g. change functions to return "bool"), from Sergey. - Renae ahci_board_mobile to board_ahci_low_power to be more descriptive of the feature as that is also used on PC and server AHCI adapters, from Mario. - Cleanup of OF match tables, from Geert. - Simplify the pata_pxa driver initialization using platform_get_irq(), from Minghao" * tag 'ata-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (38 commits) ata: pata_pxa: Use platform_get_irq() to get the interrupt ata: Drop commas after OF match table sentinels ata: ahci: Rename CONFIG_SATA_LPM_MOBILE_POLICY configuration item ata: ahci: Rename `AHCI_HFLAG_IS_MOBILE` ata: ahci: Rename board_ahci_mobile ata: pata_hpt37x: merge transfer mode setting methods ata: libata-sff: use *switch* statement in ata_sff_dev_classify() ata: add/use ata_taskfile::{error|status} fields ata: Kconfig: fix sata gemini compile test condition ata: libata-scsi: use *switch* statements to check SCSI command codes ata: libata-sff: refactor ata_sff_altstatus() ata: libata-sff: refactor ata_sff_set_devctl() ata: libata-sff: make ata_resources_present() return 'bool' ata: pata_hpt3x2n: disable fast interrupts in prereset() method ata: pata_hpt37x: disable fast interrupts in prereset() method ata: pata_hpt366: disable fast interrupts in prereset() method ata: pata_mpc52xx: use GFP_KERNEL ata: sata_rcar: drop unused #define's ata: pata_hpt366: check channel enable bits ata: sata_rcar: make sata_rcar_ata_devchk() return 'bool' ... -
Linus Torvalds authored
Merge tag 'linux-kselftest-kunit-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit updates from Shuah Khan: - changes to decrease macro layering string, integer, EQ/NE asserts - remove unused macros - several cleanups and fixes - new list tests for list_del_init_careful(), list_is_head() and list_entry_is_head() * tag 'linux-kselftest-kunit-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: list: test: Add a test for list_entry_is_head() list: test: Add a test for list_is_head() list: test: Add test for list_del_init_careful() kunit: cleanup assertion macro internal variables kunit: factor out str constants from binary assertion structs kunit: consolidate KUNIT_INIT_BINARY_ASSERT_STRUCT macros kunit: remove va_format from kunit_assert kunit: tool: drop mostly unused KunitResult.result field kunit: decrease macro layering for EQ/NE asserts kunit: decrease macro layering for integer asserts kunit: reduce layering in string assertion macros kunit: drop unused intermediate macros for ptr inequality checks kunit: make KUNIT_EXPECT_EQ() use KUNIT_EXPECT_EQ_MSG(), etc. kunit: drop unused assert_type from kunit_assert and clean up macros kunit: split out part of kunit_assert into a static const kunit: factor out kunit_base_assert_format() call into kunit_fail() kunit: drop unused kunit* field in kunit_assert kunit: move check if assertion passed into the macros kunit: add example test case showing off all the expect macros
-
Linus Torvalds authored
Merge tag 'linux-kselftest-next-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest updates from Shuah Khan: "Several build and cleanup fixes: - removing obsolete config options - removing dependency on internal kernel macros - adding config options - several build fixes related to headers and install paths" * tag 'linux-kselftest-next-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (22 commits) selftests: Fix build when $(O) points to a relative path selftests: netfilter: fix a build error on openSUSE selftests: kvm: add generated file to the .gitignore selftests/exec: add generated files to .gitignore selftests: add kselftest_install to .gitignore selftests/rtc: continuously read RTC in a loop for 30s selftests/lkdtm: Add UBSAN config selftests/lkdtm: Remove dead config option selftests/exec: Rename file binfmt_script to binfmt_script.py selftests: Use -isystem instead of -I to include headers selftests: vm: remove dependecy from internal kernel macros selftests: vm: Add the uapi headers include variable selftests: mptcp: Add the uapi headers include variable selftests: net: Add the uapi headers include variable selftests: landlock: Add the uapi headers include variable selftests: kvm: Add the uapi headers include variable selftests: futex: Add the uapi headers include variable selftests: Correct the headers install path selftests: Add and export a kernel uapi headers path selftests: set the BUILD variable to absolute path ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull cgroup updates from Tejun Heo: "All trivial cleanups without meaningful behavior changes" * 'for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: cleanup comments cgroup: Fix cgroup_can_fork() and cgroup_post_fork() kernel-doc comment cgroup: rstat: retrieve current bstat to delta directly cgroup: rstat: use same convention to assign cgroup_base_stat
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds authored
Pull workqueue updates from Tejun Heo: "Nothing major. Just follow-up cleanups from Lai after the earlier synchronization simplification" * 'for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Convert the type of pool->nr_running to int workqueue: Use wake_up_worker() in wq_worker_sleeping() instead of open code workqueue: Change the comments of the synchronization about the idle_list workqueue: Remove the mb() pair between wq_worker_sleeping() and insert_work()
-
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slabLinus Torvalds authored
Pull slab updates from Vlastimil Babka: - A few non-trivial SLUB code cleanups, most notably a refactoring of deactivate_slab(). - A bunch of trivial changes, such as removal of unused parameters, making stuff static, and employing helper functions. * tag 'slab-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: mm: slub: Delete useless parameter of alloc_slab_page() mm: slab: Delete unused SLAB_DEACTIVATED flag mm/slub: remove forced_order parameter in calculate_sizes mm/slub: refactor deactivate_slab() mm/slub: limit number of node partial slabs only in cache creation mm/slub: use helper macro __ATTR_XX_MODE for SLAB_ATTR(_RO) mm/slab_common: use helper function is_power_of_2() mm/slob: make kmem_cache_boot static
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing updates from Steven Rostedt: - New user_events interface. User space can register an event with the kernel describing the format of the event. Then it will receive a byte in a page mapping that it can check against. A privileged task can then enable that event like any other event, which will change the mapped byte to true, telling the user space application to start writing the event to the tracing buffer. - Add new "ftrace_boot_snapshot" kernel command line parameter. When set, the tracing buffer will be saved in the snapshot buffer at boot up when the kernel hands things over to user space. This will keep the traces that happened at boot up available even if user space boot up has tracing as well. - Have TRACE_EVENT_ENUM() also update trace event field type descriptions. Thus if a static array defines its size with an enum, the user space trace event parsers can still know how to parse that array. - Add new TRACE_CUSTOM_EVENT() macro. This acts the same as the TRACE_EVENT() macro, but will attach to an existing tracepoint. This will make one tracepoint be able to trace different content and not be stuck at only what the original TRACE_EVENT() macro exports. - Fixes to tracing error logging. - Better saving of cmdlines to PIDs when tracing (use the wakeup events for mapping). * tag 'trace-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (30 commits) tracing: Have type enum modifications copy the strings user_events: Add trace event call as root for low permission cases tracing/user_events: Use alloc_pages instead of kzalloc() for register pages tracing: Add snapshot at end of kernel boot up tracing: Have TRACE_DEFINE_ENUM affect trace event types as well tracing: Fix strncpy warning in trace_events_synth.c user_events: Prevent dyn_event delete racing with ioctl add/delete tracing: Add TRACE_CUSTOM_EVENT() macro tracing: Move the defines to create TRACE_EVENTS into their own files tracing: Add sample code for custom trace events tracing: Allow custom events to be added to the tracefs directory tracing: Fix last_cmd_set() string management in histogram code user_events: Fix potential uninitialized pointer while parsing field tracing: Fix allocation of last_cmd in last_cmd_set() user_events: Add documentation file user_events: Add sample code for typical usage user_events: Add self-test for validator boundaries user_events: Add self-test for perf_event integration user_events: Add self-test for dynamic_events integration user_events: Add self-test for ftrace integration ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull RTLA tracing tool updates from Steven Rostedt: "Real Time Analysis Tool updatesfor 5.18: - Support for adjusting tracing_threashold - Add -a (auto) option to make it easier for users to debug in the field - Add -e option to add more events to the trace - Add --trigger option to add triggers to events - Add --filter option to filter events - Add support to save histograms to the file - Add --dma-latency to set /dev/cpu_dma_latency - Other fixes and cleanups" * tag 'trace-rtla-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: rtla: Tools main loop cleanup rtla/timerlat: Add --dma-latency option rtla/osnoise: Fix osnoise hist stop tracing message rtla: Check for trace off also in the trace instance rtla/trace: Save event histogram output to a file rtla: Add --filter support rtla/trace: Add trace event filter helpers rtla: Add --trigger support rtla/trace: Add trace event trigger helpers rtla: Add -e/--event support rtla/trace: Add trace events helpers rtla/timerlat: Add the automatic trace option rtla/osnoise: Add the automatic trace option rtla/osnoise: Add an option to set the threshold rtla/osnoise: Add support to adjust the tracing_thresh
-
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linuxLinus Torvalds authored
Pull printk updates from Petr Mladek: - Make %pK behave the same as %p for kptr_restrict == 0 also with no_hash_pointers parameter - Ignore the default console in the device tree also when console=null or console="" is used on the command line - Document console=null and console="" behavior - Prevent a deadlock and a livelock caused by console_lock in panic() - Make console_lock available for panicking CPU - Fast query for the next to-be-used sequence number - Use the expected return values in printk.devkmsg __setup handler - Use the correct atomic operations in wake_up_klogd() irq_work handler - Avoid possible unaligned access when handling %4cc printing format * tag 'printk-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: fix return value of printk.devkmsg __setup handler vsprintf: Fix %pK with kptr_restrict == 0 printk: make suppress_panic_printk static printk: Set console_set_on_cmdline=1 when __add_preferred_console() is called with user_specified == true Docs: printk: add 'console=null|""' to admin/kernel-parameters printk: use atomic updates for klogd work printk: Drop console_sem during panic printk: Avoid livelock with heavy printk during panic printk: disable optimistic spin during panic printk: Add panic_in_progress helper vsprintf: Move space out of string literals in fourcc_string() vsprintf: Fix potential unaligned access printk: ringbuffer: Improve prb_next_seq() performance
-
Herbert Xu authored
The struct folio is not declared in cacheflush.h so we need to provide a forward declaration as otherwise users of this header file may get warnings. Reported-by:
Guenter Roeck <linux@roeck-us.net> Fixes: 522a0032 ("Add linux/cacheflush.h") Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andre Przywara authored
The Kconfig symbols required for the Allwinner F1C100 (MACH_SUNIV) are currently not selected by any defconfig. sunxi_defconfig only covers the v7 SoCs, but the F1C100s is ARMv5, so we cannot share a single image. Add the required symbols to multi_v5_defconfig, to give people some sane default config when playing around with this chip. This is probably more important as there are surely not many distros out there supporting ARMv5 out of the box. This allows my LicheePi Nano board to boot to a busybox prompt. The zImage size grows by about 50 KB, in detail: text data bss dec hex filename 10510000 4400700 687740 15598440 ee0368 vmlinux-old 10588592 4469096 686812 15744500 f03df4 vmlinux-new 14922908 arch/arm/boot/Image-old 15067388 arch/arm/boot/Image-new 6388016 arch/arm/boot/zImage-old 6440064 arch/arm/boot/zImage-new Signed-off-by:Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20220317183043.948432-6-andre.przywara@arm.com' Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
git://git.infradead.org/users/willy/pagecacheLinus Torvalds authored
Pull filesystem folio updates from Matthew Wilcox: "Primarily this series converts some of the address_space operations to take a folio instead of a page. Notably: - a_ops->is_partially_uptodate() takes a folio instead of a page and changes the type of the 'from' and 'count' arguments to make it obvious they're bytes. - a_ops->invalidatepage() becomes ->invalidate_folio() and has a similar type change. - a_ops->launder_page() becomes ->launder_folio() - a_ops->set_page_dirty() becomes ->dirty_folio() and adds the address_space as an argument. There are a couple of other misc changes up front that weren't worth separating into their own pull request" * tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecache: (53 commits) fs: Remove aops ->set_page_dirty fb_defio: Use noop_dirty_folio() fs: Convert __set_page_dirty_no_writeback to noop_dirty_folio fs: Convert __set_page_dirty_buffers to block_dirty_folio nilfs: Convert nilfs_set_page_dirty() to nilfs_dirty_folio() mm: Convert swap_set_page_dirty() to swap_dirty_folio() ubifs: Convert ubifs_set_page_dirty to ubifs_dirty_folio f2fs: Convert f2fs_set_node_page_dirty to f2fs_dirty_node_folio f2fs: Convert f2fs_set_data_page_dirty to f2fs_dirty_data_folio f2fs: Convert f2fs_set_meta_page_dirty to f2fs_dirty_meta_folio afs: Convert afs_dir_set_page_dirty() to afs_dir_dirty_folio() btrfs: Convert extent_range_redirty_for_io() to use folios fs: Convert trivial uses of __set_page_dirty_nobuffers to filemap_dirty_folio btrfs: Convert from set_page_dirty to dirty_folio fscache: Convert fscache_set_page_dirty() to fscache_dirty_folio() fs: Add aops->dirty_folio fs: Remove aops->launder_page orangefs: Convert launder_page to launder_folio nfs: Convert from launder_page to launder_folio fuse: Convert from launder_page to launder_folio ... -
git://git.infradead.org/users/willy/pagecacheLinus Torvalds authored
Pull folio updates from Matthew Wilcox: - Rewrite how munlock works to massively reduce the contention on i_mmap_rwsem (Hugh Dickins): https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/ - Sort out the page refcount mess for ZONE_DEVICE pages (Christoph Hellwig): https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/ - Convert GUP to use folios and make pincount available for order-1 pages. (Matthew Wilcox) - Convert a few more truncation functions to use folios (Matthew Wilcox) - Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew Wilcox) - Convert rmap_walk to use folios (Matthew Wilcox) - Convert most of shrink_page_list() to use a folio (Matthew Wilcox) - Add support for creating large folios in readahead (Matthew Wilcox) * tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache: (114 commits) mm/damon: minor cleanup for damon_pa_young selftests/vm/transhuge-stress: Support file-backed PMD folios mm/filemap: Support VM_HUGEPAGE for file mappings mm/readahead: Switch to page_cache_ra_order mm/readahead: Align file mappings for non-DAX mm/readahead: Add large folio readahead mm: Support arbitrary THP sizes mm: Make large folios depend on THP mm: Fix READ_ONLY_THP warning mm/filemap: Allow large folios to be added to the page cache mm: Turn can_split_huge_page() into can_split_folio() mm/vmscan: Convert pageout() to take a folio mm/vmscan: Turn page_check_references() into folio_check_references() mm/vmscan: Account large folios correctly mm/vmscan: Optimise shrink_page_list for non-PMD-sized folios mm/vmscan: Free non-shmem folios without splitting them mm/rmap: Constify the rmap_walk_control argument mm/rmap: Convert rmap_walk() to take a folio mm: Turn page_anon_vma() into folio_anon_vma() mm/rmap: Turn page_lock_anon_vma_read() into folio_lock_anon_vma_read() ...
-
- 22 Mar, 2022 17 commits
-
-
Linus Torvalds authored
Merge updates from Andrew Morton: - A few misc subsystems: kthread, scripts, ntfs, ocfs2, block, and vfs - Most the MM patches which precede the patches in Willy's tree: kasan, pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap, sparsemem, vmalloc, pagealloc, memory-failure, mlock, hugetlb, userfaultfd, vmscan, compaction, mempolicy, oom-kill, migration, thp, cma, autonuma, psi, ksm, page-poison, madvise, memory-hotplug, rmap, zswap, uaccess, ioremap, highmem, cleanups, kfence, hmm, and damon. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (227 commits) mm/damon/sysfs: remove repeat container_of() in damon_sysfs_kdamond_release() Docs/ABI/testing: add DAMON sysfs interface ABI document Docs/admin-guide/mm/damon/usage: document DAMON sysfs interface selftests/damon: add a test for DAMON sysfs interface mm/damon/sysfs: support DAMOS stats mm/damon/sysfs: support DAMOS watermarks mm/damon/sysfs: support schemes prioritization mm/damon/sysfs: support DAMOS quotas mm/damon/sysfs: support DAMON-based Operation Schemes mm/damon/sysfs: support the physical address space monitoring mm/damon/sysfs: link DAMON for virtual address spaces monitoring mm/damon: implement a minimal stub for sysfs-based DAMON interface mm/damon/core: add number of each enum type values mm/damon/core: allow non-exclusive DAMON start/stop Docs/damon: update outdated term 'regions update interval' Docs/vm/damon/design: update DAMON-Idle Page Tracking interference handling Docs/vm/damon: call low level monitoring primitives the operations mm/damon: remove unnecessary CONFIG_DAMON option mm/damon/paddr,vaddr: remove damon_{p,v}a_{target_valid,set_operations}() mm/damon/dbgfs-test: fix is_target_id() change ... -
Xin Hao authored
In damon_sysfs_kdamond_release(), we have use container_of() to get "kdamond" pointer, so there no need to get it once again. Link: https://lkml.kernel.org/r/20220303075314.22502-1-xhao@linux.alibaba.comSigned-off-by:
Xin Hao <xhao@linux.alibaba.com> Reviewed-by:
SeongJae Park <sj@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
SeongJae Park authored
This commit adds DAMON sysfs interface ABI document under Documentation/ABI/testing. Link: https://lkml.kernel.org/r/20220228081314.5770-14-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
This commit adds detailed usage of DAMON sysfs interface in the admin-guide document for DAMON. Link: https://lkml.kernel.org/r/20220228081314.5770-13-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
This commit adds a selftest for DAMON sysfs interface. It tests the functionality of 'nr' files and existence of files in each directory of the hierarchy. Link: https://lkml.kernel.org/r/20220228081314.5770-12-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
This commit makes DAMON sysfs interface supports the DAMOS stats feature. Specifically, this commit adds 'stats' directory under each scheme directory, and update the contents of the files under the directory according to the latest monitoring results, when the user writes special keyword, 'update_schemes_stats' to the 'state' file of the kdamond. As a result, the files hierarchy becomes as below: /sys/kernel/mm/damon/admin │ kdamonds/nr_kdamonds │ │ 0/state,pid │ │ │ contexts/nr_contexts │ │ │ │ 0/operations │ │ │ │ │ monitoring_attrs/intervals/sample_us,aggr_us,update_us │ │ │ │ │ │ nr_regions/min,max │ │ │ │ │ targets/nr_targets │ │ │ │ │ │ 0/pid_target │ │ │ │ │ │ │ regions/nr_regions │ │ │ │ │ │ │ │ 0/start,end │ │ │ │ │ │ │ │ ... │ │ │ │ │ │ ... │ │ │ │ │ schemes/nr_schemes │ │ │ │ │ │ 0/action │ │ │ │ │ │ │ access_pattern/ │ │ │ │ │ │ │ │ sz/min,max │ │ │ │ │ │ │ │ nr_accesses/min,max │ │ │ │ │ │ │ │ age/min,max │ │ │ │ │ │ │ quotas/ms,sz,reset_interval_ms │ │ │ │ │ │ │ │ weights/sz_permil,nr_accesses_permil,age_permil │ │ │ │ │ │ │ watermarks/metric,interval_us,high,mid,low │ │ │ │ │ │ │ stats/ <- NEW DIRECTORY │ │ │ │ │ │ │ │ nr_tried,sz_tried,nr_applied,sz_applied,qt_exceeds │ │ │ │ │ │ ... │ │ │ │ ... │ │ ... Link: https://lkml.kernel.org/r/20220228081314.5770-11-sj@kernel.orgSigned-off-by: -
SeongJae Park authored
This commit makes DAMON sysfs interface supports the DAMOS watermarks feature. Specifically, this commit adds 'watermarks' directory under each scheme directory and makes kdamond 'state' file writing respects the contents in the directory. As a result, the files hierarchy becomes as below: /sys/kernel/mm/damon/admin │ kdamonds/nr_kdamonds │ │ 0/state,pid │ │ │ contexts/nr_contexts │ │ │ │ 0/operations │ │ │ │ │ monitoring_attrs/intervals/sample_us,aggr_us,update_us │ │ │ │ │ │ nr_regions/min,max │ │ │ │ │ targets/nr_targets │ │ │ │ │ │ 0/pid_target │ │ │ │ │ │ │ regions/nr_regions │ │ │ │ │ │ │ │ 0/start,end │ │ │ │ │ │ │ │ ... │ │ │ │ │ │ ... │ │ │ │ │ schemes/nr_schemes │ │ │ │ │ │ 0/action │ │ │ │ │ │ │ access_pattern/ │ │ │ │ │ │ │ │ sz/min,max │ │ │ │ │ │ │ │ nr_accesses/min,max │ │ │ │ │ │ │ │ age/min,max │ │ │ │ │ │ │ quotas/ms,sz,reset_interval_ms │ │ │ │ │ │ │ │ weights/sz_permil,nr_accesses_permil,age_permil │ │ │ │ │ │ │ watermarks/ <- NEW DIRECTORY │ │ │ │ │ │ │ │ metric,interval_us,high,mid,lo │ │ │ │ │ │ ... │ │ │ │ ... │ │ ... [sj@kernel.org: fix out-of-bound array access for wmark_metric_strs[]] Link: https://lkml.kernel.org/r/20220301185619.2904-1-sj@kernel.org Link: https://lkml.kernel.org/r/20220228081314.5770-10-sj@kernel.orgSigned-off-by: -
SeongJae Park authored
This commit makes DAMON sysfs interface supports the DAMOS' regions prioritization weights feature under quotas limitation. Specifically, this commit adds 'weights' directory under each scheme directory and makes kdamond 'state' file writing respects the contents in the directory. /sys/kernel/mm/damon/admin │ kdamonds/nr │ │ 0/state,pid │ │ │ contexts/nr │ │ │ │ 0/operations │ │ │ │ │ monitoring_attrs/intervals/sample_us,aggr_us,update_us │ │ │ │ │ │ nr_regions/min,max │ │ │ │ │ targets/nr │ │ │ │ │ │ 0/pid │ │ │ │ │ │ │ regions/nr │ │ │ │ │ │ │ │ 0/start,end │ │ │ │ │ │ │ │ ... │ │ │ │ │ │ ... │ │ │ │ │ schemes/nr │ │ │ │ │ │ 0/action │ │ │ │ │ │ │ access_pattern/ │ │ │ │ │ │ │ │ sz/min,max │ │ │ │ │ │ │ │ nr_accesses/min,max │ │ │ │ │ │ │ │ age/min,max │ │ │ │ │ │ │ quotas/ms,bytes,reset_interval_ms │ │ │ │ │ │ │ │ weights/ <- NEW DIRECTORY │ │ │ │ │ │ │ │ │ weights/sz_permil,nr_accesses_permil,age_permil │ │ │ │ │ │ ... │ │ │ │ ... │ │ ... Link: https://lkml.kernel.org/r/20220228081314.5770-9-sj@kernel.orgSigned-off-by: -
SeongJae Park authored
This commit makes DAMON sysfs interface supports the DAMOS quotas feature. Specifically, this commit adds 'quotas' directory under each scheme directory and makes kdamond 'state' file writing respects the contents in the directory. As a result, the files hierarchy becomes as below: /sys/kernel/mm/damon/admin │ kdamonds/nr_kdamonds │ │ 0/state,pid │ │ │ contexts/nr_contexts │ │ │ │ 0/operations │ │ │ │ │ monitoring_attrs/intervals/sample_us,aggr_us,update_us │ │ │ │ │ │ nr_regions/min,max │ │ │ │ │ targets/nr_targets │ │ │ │ │ │ 0/pid_target │ │ │ │ │ │ │ regions/nr_regions │ │ │ │ │ │ │ │ 0/start,end │ │ │ │ │ │ │ │ ... │ │ │ │ │ │ ... │ │ │ │ │ schemes/nr_schemes │ │ │ │ │ │ 0/action │ │ │ │ │ │ │ access_pattern/ │ │ │ │ │ │ │ │ sz/min,max │ │ │ │ │ │ │ │ nr_accesses/min,max │ │ │ │ │ │ │ │ age/min,max │ │ │ │ │ │ │ quotas/ms,bytes,reset_interval_ms <- NEW DIRECTORY │ │ │ │ │ │ ... │ │ │ │ ... │ │ ... Link: https://lkml.kernel.org/r/20220228081314.5770-8-sj@kernel.orgSigned-off-by: -
SeongJae Park authored
This commit makes DAMON sysfs interface supports the DAMON-based operation schemes (DAMOS) feature. Specifically, this commit adds 'schemes' directory under each context direcotry, and makes kdamond 'state' file writing respects the contents in the directory. Note that this commit doesn't support all features of DAMOS but only the target access pattern and action feature. Supports for quotas, prioritization, watermarks will follow. As a result, the files hierarchy becomes as below: /sys/kernel/mm/damon/admin │ kdamonds/nr_kdamonds │ │ 0/state,pid │ │ │ contexts/nr_contexts │ │ │ │ 0/operations │ │ │ │ │ monitoring_attrs/intervals/sample_us,aggr_us,update_us │ │ │ │ │ │ nr_regions/min,max │ │ │ │ │ targets/nr_targets │ │ │ │ │ │ 0/pid_target │ │ │ │ │ │ │ regions/nr_regions │ │ │ │ │ │ │ │ 0/start,end │ │ │ │ │ │ │ │ ... │ │ │ │ │ │ ... │ │ │ │ │ schemes/nr_schemes <- NEW DIRECTORY │ │ │ │ │ │ 0/action │ │ │ │ │ │ │ access_pattern/ │ │ │ │ │ │ │ │ sz/min,max │ │ │ │ │ │ │ │ nr_accesses/min,max │ │ │ │ │ │ │ │ age/min,max │ │ │ │ │ │ ... │ │ │ │ ... │ │ ... Link: https://lkml.kernel.org/r/20220228081314.5770-7-sj@kernel.orgSigned-off-by: -
SeongJae Park authored
This commit makes DAMON sysfs interface supports the physical address space monitoring. Specifically, this commit adds support of the initial monitoring regions set feature by adding 'regions' directory under each target directory and makes context operations file to receive 'paddr' in addition to 'vaddr'. As a result, the files hierarchy becomes as below: /sys/kernel/mm/damon/admin │ kdamonds/nr_kdamonds │ │ 0/state,pid │ │ │ contexts/nr_contexts │ │ │ │ 0/operations │ │ │ │ │ monitoring_attrs/ │ │ │ │ │ │ intervals/sample_us,aggr_us,update_us │ │ │ │ │ │ nr_regions/min,max │ │ │ │ │ targets/nr_targets │ │ │ │ │ │ 0/pid_target │ │ │ │ │ │ │ regions/nr_regions <- NEW DIRECTORY │ │ │ │ │ │ │ │ 0/start,end │ │ │ │ │ │ │ │ ... │ │ │ │ │ │ ... │ │ │ │ ... │ │ ... Link: https://lkml.kernel.org/r/20220228081314.5770-6-sj@kernel.orgSigned-off-by: -
SeongJae Park authored
This commit links the DAMON sysfs interface to DAMON so that users can control DAMON via the interface. In detail, this commit makes writing 'on' to 'state' file constructs DAMON contexts based on values that users have written to relevant sysfs files and start the context. It supports only virtual address spaces monitoring at the moment, though. The files hierarchy of DAMON sysfs interface after this commit is shown below. In the below figure, parents-children relations are represented with indentations, each directory is having ``/`` suffix, and files in each directory are separated by comma (","). /sys/kernel/mm/damon/admin │ kdamonds/nr_kdamonds │ │ 0/state,pid │ │ │ contexts/nr_contexts │ │ │ │ 0/operations │ │ │ │ │ monitoring_attrs/ │ │ │ │ │ │ intervals/sample_us,aggr_us,update_us │ │ │ │ │ │ nr_regions/min,max │ │ │ │ │ targets/nr_targets │ │ │ │ │ │ 0/pid_target │ │ │ │ │ │ ... │ │ │ │ ... │ │ ... The usage is straightforward. Writing a number ('N') to each 'nr_*' file makes directories named '0' to 'N-1'. Users can construct DAMON contexts by writing proper values to the files in the straightforward manner and start each kdamond by writing 'on' to 'kdamonds/<N>/state'. Link: https://lkml.kernel.org/r/20220228081314.5770-5-sj@kernel.orgSigned-off-by: -
SeongJae Park authored
DAMON's debugfs-based user interface served very well, so far. However, it unnecessarily depends on debugfs, while DAMON is not aimed to be used for only debugging. Also, the interface receives multiple values via one file. For example, schemes file receives 18 values separated by white spaces. As a result, it is ineffient, hard to be used, and difficult to be extended. Especially, keeping backward compatibility of user space tools is getting only challenging. It would be better to implement another reliable and flexible interface and deprecate the debugfs interface in long term. To this end, this commit implements a stub of a part of the new user interface of DAMON using sysfs. Specifically, this commit implements the sysfs control parts for virtual address space monitoring. More specifically, the idea of the new interface is, using directory hierarchies and making one file for one value. The hierarchy that this commit is introducing is as below. In the below figure, parents-children relations are represented with indentations, each directory is having ``/`` suffix, and files in each directory are separated by comma (","). /sys/kernel/mm/damon/admin │ kdamonds/nr_kdamonds │ │ 0/state,pid │ │ │ contexts/nr_contexts │ │ │ │ 0/operations │ │ │ │ │ monitoring_attrs/ │ │ │ │ │ │ intervals/sample_us,aggr_us,update_us │ │ │ │ │ │ nr_regions/min,max │ │ │ │ │ targets/nr_targets │ │ │ │ │ │ 0/pid_target │ │ │ │ │ │ ... │ │ │ │ ... │ │ ... Writing a number <N> to each 'nr' file makes directories of name <0> to <N-1> in the directory of the 'nr' file. That's all this commit does. Writing proper values to relevant files will construct the DAMON contexts, and writing a special keyword, 'on', to 'state' files for each kdamond will ask DAMON to start the constructed contexts. For a short example, using below commands for monitoring virtual address spaces of a given workload is imaginable: # cd /sys/kernel/mm/damon/admin/ # echo 1 > kdamonds/nr_kdamonds # echo 1 > kdamonds/0/contexts/nr_contexts # echo vaddr > kdamonds/0/contexts/0/operations # echo 1 > kdamonds/0/contexts/0/targets/nr_targets # echo $(pidof <workload>) > kdamonds/0/contexts/0/targets/0/pid_target # echo on > kdamonds/0/state Please note that this commit is implementing only the sysfs part stub as abovely mentioned. This commit doesn't implement the special keywords for 'state' files. Following commits will do that. [jiapeng.chong@linux.alibaba.com: fix missing error code in damon_sysfs_attrs_add_dirs()] Link: https://lkml.kernel.org/r/20220302111120.24984-1-jiapeng.chong@linux.alibaba.com Link: https://lkml.kernel.org/r/20220228081314.5770-4-sj@kernel.orgSigned-off-by:Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Cc: David Rientjes <rientjes@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Xin Hao <xhao@linux.alibaba.com> Signed-off-by:
-
SeongJae Park authored
This commit declares the number of legal values for each DAMON enum types to make traversals of such DAMON enum types easy and safe. Link: https://lkml.kernel.org/r/20220228081314.5770-3-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
Patch series "Introduce DAMON sysfs interface", v3. Introduction ============ DAMON's debugfs-based user interface (DAMON_DBGFS) served very well, so far. However, it unnecessarily depends on debugfs, while DAMON is not aimed to be used for only debugging. Also, the interface receives multiple values via one file. For example, schemes file receives 18 values. As a result, it is inefficient, hard to be used, and difficult to be extended. Especially, keeping backward compatibility of user space tools is getting only challenging. It would be better to implement another reliable and flexible interface and deprecate DAMON_DBGFS in long term. For the reason, this patchset introduces a sysfs-based new user interface of DAMON. The idea of the new interface is, using directory hierarchies and having one dedicated file for each value. For a short example, users can do the virtual address monitoring via the interface as below: # cd /sys/kernel/mm/damon/admin/ # echo 1 > kdamonds/nr_kdamonds # echo 1 > kdamonds/0/contexts/nr_contexts # echo vaddr > kdamonds/0/contexts/0/operations # echo 1 > kdamonds/0/contexts/0/targets/nr_targets # echo $(pidof <workload>) > kdamonds/0/contexts/0/targets/0/pid_target # echo on > kdamonds/0/state A brief representation of the files hierarchy of DAMON sysfs interface is as below. Childs are represented with indentation, directories are having '/' suffix, and files in each directory are separated by comma. /sys/kernel/mm/damon/admin │ kdamonds/nr_kdamonds │ │ 0/state,pid │ │ │ contexts/nr_contexts │ │ │ │ 0/operations │ │ │ │ │ monitoring_attrs/ │ │ │ │ │ │ intervals/sample_us,aggr_us,update_us │ │ │ │ │ │ nr_regions/min,max │ │ │ │ │ targets/nr_targets │ │ │ │ │ │ 0/pid_target │ │ │ │ │ │ │ regions/nr_regions │ │ │ │ │ │ │ │ 0/start,end │ │ │ │ │ │ │ │ ... │ │ │ │ │ │ ... │ │ │ │ │ schemes/nr_schemes │ │ │ │ │ │ 0/action │ │ │ │ │ │ │ access_pattern/ │ │ │ │ │ │ │ │ sz/min,max │ │ │ │ │ │ │ │ nr_accesses/min,max │ │ │ │ │ │ │ │ age/min,max │ │ │ │ │ │ │ quotas/ms,bytes,reset_interval_ms │ │ │ │ │ │ │ │ weights/sz_permil,nr_accesses_permil,age_permil │ │ │ │ │ │ │ watermarks/metric,interval_us,high,mid,low │ │ │ │ │ │ │ stats/nr_tried,sz_tried,nr_applied,sz_applied,qt_exceeds │ │ │ │ │ │ ... │ │ │ │ ... │ │ ... Detailed usage of the files will be described in the final Documentation patch of this patchset. Main Difference Between DAMON_DBGFS and DAMON_SYSFS --------------------------------------------------- At the moment, DAMON_DBGFS and DAMON_SYSFS provides same features. One important difference between them is their exclusiveness. DAMON_DBGFS works in an exclusive manner, so that no DAMON worker thread (kdamond) in the system can run concurrently and interfere somehow. For the reason, DAMON_DBGFS asks users to construct all monitoring contexts and start them at once. It's not a big problem but makes the operation a little bit complex and unflexible. For more flexible usage, DAMON_SYSFS moves the responsibility of preventing any possible interference to the admins and work in a non-exclusive manner. That is, users can configure and start contexts one by one. Note that DAMON respects both exclusive groups and non-exclusive groups of contexts, in a manner similar to that of reader-writer locks. That is, if any exclusive monitoring contexts (e.g., contexts that started via DAMON_DBGFS) are running, DAMON_SYSFS does not start new contexts, and vice versa. Future Plan of DAMON_DBGFS Deprecation ====================================== Once this patchset is merged, DAMON_DBGFS development will be frozen. That is, we will maintain it to work as is now so that no users will be break. But, it will not be extended to provide any new feature of DAMON. The support will be continued only until next LTS release. After that, we will drop DAMON_DBGFS. User-space Tooling Compatibility -------------------------------- As DAMON_SYSFS provides all features of DAMON_DBGFS, all user space tooling can move to DAMON_SYSFS. As we will continue supporting DAMON_DBGFS until next LTS kernel release, user space tools would have enough time to move to DAMON_SYSFS. The official user space tool, damo[1], is already supporting both DAMON_SYSFS and DAMON_DBGFS. Both correctness tests[2] and performance tests[3] of DAMON using DAMON_SYSFS also passed. [1] https://github.com/awslabs/damo [2] https://github.com/awslabs/damon-tests/tree/master/corr [3] https://github.com/awslabs/damon-tests/tree/master/perf Sequence of Patches =================== First two patches (patches 1-2) make core changes for DAMON_SYSFS. The first one (patch 1) allows non-exclusive DAMON contexts so that DAMON_SYSFS can work in non-exclusive mode, while the second one (patch 2) adds size of DAMON enum types so that DAMON API users can safely iterate the enums. Third patch (patch 3) implements basic sysfs stub for virtual address spaces monitoring. Note that this implements only sysfs files and DAMON is not linked. Fourth patch (patch 4) links the DAMON_SYSFS to DAMON so that users can control DAMON using the sysfs files. Following six patches (patches 5-10) implements other DAMON features that DAMON_DBGFS supports one by one (physical address space monitoring, DAMON-based operation schemes, schemes quotas, schemes prioritization weights, schemes watermarks, and schemes stats). Following patch (patch 11) adds a simple selftest for DAMON_SYSFS, and the final one (patch 12) documents DAMON_SYSFS. This patch (of 13): To avoid interference between DAMON contexts monitoring overlapping memory regions, damon_start() works in an exclusive manner. That is, damon_start() does nothing bug fails if any context that started by another instance of the function is still running. This makes its usage a little bit restrictive. However, admins could aware each DAMON usage and address such interferences on their own in some cases. This commit hence implements non-exclusive mode of the function and allows the callers to select the mode. Note that the exclusive groups and non-exclusive groups of contexts will respect each other in a manner similar to that of reader-writer locks. Therefore, this commit will not cause any behavioral change to the exclusive groups. Link: https://lkml.kernel.org/r/20220228081314.5770-1-sj@kernel.org Link: https://lkml.kernel.org/r/20220228081314.5770-2-sj@kernel.orgSigned-off-by: -
SeongJae Park authored
Before DAMON is merged in the mainline, the concept of 'regions update interval' has generalized to be used as the time interval for update of any monitoring operations related data structure, but the document has not updated properly. This commit updates the document for better consistency. Link: https://lkml.kernel.org/r/20220222170100.17068-4-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
In DAMON's early development stage before it be merged in the mainline, it was first designed to work exclusively with Idle page tracking to avoid any interference between each other. Later, but still before be merged in the mainline, because Idle page tracking is fully under the control of sysadmins, we made the resolving of conflict as the responsibility of sysadmins. The document is not updated for the change, though. This commit updates the document for that. Link: https://lkml.kernel.org/r/20220222170100.17068-3-sj@kernel.orgSigned-off-by:
-
