Current code didn't modify the QP state to error because it queried the
QP state as a bitmap while it isn't. So the code never got executed.
This patch fixes this and queries for each QP state respectively and not
at once via a bitmask.
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Reviewed-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Reviewed-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Reviewed-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Configure ibcq->cqe when a CQ is created.
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Reviewed-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RQ WQE size other than 128B is not supported.  Correct
RQ size calculation to use 128B only.

Since this breaks ABI, add additional code to
provide compatibility with v4 user provider, libi40iw.
Signed-off-by: Chien Tin Tung <chien.tin.tung@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Code that dereferences the struct net_device ip_ptr member must be
protected with an in_dev_get() / in_dev_put() pair. Hence insert
calls to these functions.

Fixes: commit 7b85627b ("IB/cma: IBoE (RoCE) IP-based GID addressing")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Roland Dreier <roland@purestorage.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

A socket is associated with every QP by the rxe driver but sock_release()
is never called. Add a call to sock_release() in rxe_qp_cleanup().

Fixes: commit 8700e3e7c48A5 ("Add Soft RoCE driver")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Moni Shoua <monis@mellanox.com>
Cc: Kamal Heib <kamalh@mellanox.com>
Cc: Amir Vadai <amirv@mellanox.com>
Cc: Haggai Eran <haggaie@mellanox.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

The current QP FetchBurstMax value is 256B, which
is incorrect since a WR can exceed that value.  The
result being a partial WR fetched by hardware, and
a fatal "bad WR" error posted by the SGE.

So bump the FetchBurstMax to 512B.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

This patch series adds a driver for a paravirtual RDMA device. The
device is developed for VMware's Virtual Machines and allows existing RDMA
applications to continue to use existing Verbs API when deployed in VMs
on ESXi. We recently did a presentation in the OFA Workshop [1] regarding
this device.

Description and RDMA Support
============================
The virtual device is exposed as a dual function PCIe device. One part
is a virtual network device (VMXNet3) which provides networking properties
like MAC, IP addresses to the RDMA part of the device. The networking
properties are used to register GIDs required by RDMA applications to
communicate.

These patches add support and the all required infrastructure for
letting applications use such a device. We support the mandatory Verbs API as
well as the base memory management extensions (Local Inv, Send with Inv and
Fast Register Work Requests). We currently support both Reliable Connected
and Unreliable Datagram QPs but do not support Shared Receive Queues
(SRQs).

Also, we support the following types of Work Requests:
 o Send/Receive (with or without Immediate Data)
 o RDMA Write (with or without Immediate Data)
 o RDMA Read
 o Local Invalidate
 o Send with Invalidate
 o Fast Register Work Requests

This version only adds support for version 1 of RoCE. We will add RoCEv2
support in a future patch. We do support registration of both MAC-based
and IP-based GIDs. I have also created a git tree for our user-level driver
[2].

Testing
=======
We have tested this internally for various types of Guest OS - Red Hat,
Centos, Ubuntu 12.04/14.04/16.04, Oracle Enterprise Linux, SLES 12
using backported versions of this driver. The tests included several
runs of the performance tests (included with OFED), Intel MPI PingPong
benchmark on OpenMPI, krping for FRWRs. Mellanox has been kind enough
to test the backported version of the driver internally on their hardware
using a VMware provided ESX build. I have also applied and tested this
with Doug's k.o/for-4.9 branch (commit 5603910b). Note, that this patch
series should be applied all together. I split out the commits so that
it may be easier to review.

PVRDMA Resources
================
[1] OFA Workshop Presentation -
https://openfabrics.org/images/eventpresos/2016presentations/102parardma.pdf

[2] Libpvrdma User-level library -
http://git.openfabrics.org/?p=~aditr/libpvrdma.git;a=summaryReviewed-by: Jorgen Hansen <jhansen@vmware.com>
Reviewed-by: George Zhang <georgezhang@vmware.com>
Reviewed-by: Aditya Sarwade <asarwade@vmware.com>
Reviewed-by: Bryan Tan <bryantan@vmware.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

If uhw->inlen is non-zero, the value of variable err is 0 if the copy
succeeds. Then, if kzalloc() or kmalloc() returns a NULL pointer, it
will return 0 to the callers. As a result, the callers cannot detect the
errors. This patch fixes the bug, assign "-ENOMEM" to err before the
NULL pointer checks, and remove the initialization of err at the
beginning.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=189031Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

In function ocrdma_mbx_create_ah_tbl(), returns the value of status on
errors. However, because status is initialized with 0, 0 will be
returned even if on error paths. This patch initialize status with
"-ENOMEM".

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188831Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Return value of skb_linearize should be handled in function
nes_netdev_start_xmit.

Compiled in x86_64
Signed-off-by: Zhouyi Zhou <yizhouzhou@ict.ac.cn>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Remove Mitesh Ahuja <mitesh.ahuja@avagotech.com> from
maintainers file. This email address seems not active
and causes to mail bounces during submissions.
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

__ib_umem_release calls dma_unmap_sg with a different number of
sg_entries than ib_umem_get uses for dma_map_sg. This might cause
trouble for implementations that merge sglist entries and results
in the following dma debug complaint:

DMA-API: device driver frees DMA sg list with different entry
         count [map count=2] [unmap count=1]

Fix it by using the correct value.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

The recent introduction of qedr driver support in qede causes a GPF when probing the driver in a server without a RoCE enabled QLogic NIC. This fix avoids using an uninitialized pointer in such a case. Caught by the kernel test robot.
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

In mthca_create_ah(), pci_pool_alloc() followed by memset will be
replaced by pci_pool_zalloc()
Signed-off-by: Souptick joarder <jrdr.linux@gmail.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Make it clear that qp->sq.wqe_cnt is not the number of WQEs.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Eli Cohen <eli@mellanox.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

This has been detected by building the mlx5 driver with W=1.

Fixes: 1a412fb1 ('net/mlx5: Fixes: 1a412fb1 (IB/mlx5: Modify QP
commands via mlx5 ifc')
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Eli Cohen <eli@mellanox.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Detected by sparse.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Eli Cohen <eli@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Avoid that shutdown of srp_daemon is delayed if add_target_mutex is
held by another process.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Make it easier to figure out what is going on if memory mapping
fails because more memory regions than mr_per_cmd are needed.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

If login fails because memory region allocation failed it can be
hard to figure out what happened. Make it easier to figure out
why login failed by logging a message if ib_alloc_mr() fails.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

This patch makes the srp_add_one() code more compact and does not
change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Avoid that the kernel build fails as follows if dynamic debug support
is disabled:

drivers/infiniband/ulp/srp/ib_srp.c:2272:3: error: implicit declaration of function 'DEFINE_DYNAMIC_DEBUG_METADATA'
drivers/infiniband/ulp/srp/ib_srp.c:2272:33: error: 'ddm' undeclared (first use in this function)
drivers/infiniband/ulp/srp/ib_srp.c:2275:39: error: '_DPRINTK_FLAGS_PRINT' undeclared (first use in this function)
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

This patch avoids that Coverity complains about not checking the
ib_find_pkey() return value.

Fixes: commit 547af765 ("IB/multicast: Report errors on multicast groups if P_key changes")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

This patch avoids that Coverity reports the following:

    Using uninitialized value port_attr.state when calling printk

Fixes: commit 94232d9c ("IPoIB: Start multicast join process only on active ports")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Erez Shitrit <erezsh@mellanox.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

The array ib_mad_mgmt_class_table.method_table has MAX_MGMT_CLASS
(80) elements. Hence compare the array index with that value instead
of with IB_MGMT_MAX_METHODS (128). This patch avoids that Coverity
reports the following:

Overrunning array class->method_table of 80 8-byte elements at element index 127 (byte offset 1016) using index convert_mgmt_class(mad_hdr->mgmt_class) (which evaluates to 127).

Fixes: commit b7ab0b19 ("IB/mad: Verify mgmt class in received MADs")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Hal Rosenstock <hal@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

The special QP creation error path relies on offset_of(struct mlx4_ib_sqp,
qp) == 0. Remove this assumption because that makes the QP creation
code easier to understand.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Report the following message only once if no ACL has been configured
yet for an initiator port:

"Rejected login because no ACL has been configured yet for initiator %s.\n"
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagig@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

The function usnic_ib_qp_grp_get_chunk only returns an ERR_PTR value or a
valid pointer, never NULL.  The same is true of get_qp_res_chunk, which
just returns the result of calling usnic_ib_qp_grp_get_chunk.  Simplify
IS_ERR_OR_NULL to IS_ERR in both cases.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression t,e;
@@

t = \(usnic_ib_qp_grp_get_chunk(...)\|get_qp_res_chunk(...)\)
... when != t=e
- IS_ERR_OR_NULL(t)
+ IS_ERR(t)

@@
expression t,e,e1;
@@

t = \(usnic_ib_qp_grp_get_chunk(...)\|get_qp_res_chunk(...)\)
... when != t=e
?- t ? PTR_ERR(t) : e1
+ PTR_ERR(t)
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

from "InfiBand Architecture Specifications Volume 1":

  A QP is said to have a stale connection when only one side has
  connection information. A stale connection may result if the remote CM
  had dropped the connection and sent a DREQ but the DREQ was never
  received by the local CM. Alternatively the remote CM may have lost
  all record of past connections because its node crashed and rebooted,
  while the local CM did not become aware of the remote node's reboot
  and therefore did not clean up stale connections.

and:

   A local CM may receive a REQ/REP for a stale connection. It shall
   abort the connection issuing REJ to the REQ/REP. It shall then issue
   DREQ with "DREQ:remote QPN” set to the remote QPN from the REQ/REP.

This patch solves a problem with reuse of QPN. Current codebase, that
is IPoIB, relies on a REAP-mechanism to do cleanup of the structures
in CM. A problem with this is the timeconstants governing this
mechanism; they are up to 768 seconds and the interface may look
inresponsive in that period.  Issuing a DREQ (and receiving a DREP)
does the necessary cleanup and the interface comes up.
Signed-off-by: Hans Westgaard Ry <hans.westgaard.ry@oracle.com>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

There are several places, where errors in dma_map_single() are
ignored. The patch fixes them.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>

rvt_create_qp() creates qp->ip only when a qp creation request comes from
userspace (udata is not NULL).  If we exceed the number of available
queue pairs however, the error path always attempts to put a kref to this
structure.  If the requestor is inside the kernel, this leads to a crash.

We fix this by checking that qp->ip is not NULL before caling kref_put().
Signed-off-by: Jim Foraker <foraker1@llnl.gov>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>