- 21 Apr, 2016 21 commits
-
-
Simon Horman authored
When using masked actions the ipv6_proto field of an action to set IPv6 fields may be zero rather than the prevailing protocol which will result in skipping checksum recalculation. This patch resolves the problem by relying on the protocol in the flow key rather than that in the set field action. Fixes: 83d2b9ba ("net: openvswitch: Support masked set actions.") Cc: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Shrikrishna Khare authored
For IPv6, if the device indicates that the checksum is correct, set CHECKSUM_UNNECESSARY. Reported-by:
Subbarao Narahari <snarahari@vmware.com> Signed-off-by:
Shrikrishna Khare <skhare@vmware.com> Signed-off-by:
Jin Heo <heoj@vmware.com> Signed-off-by:
-
Ben Hutchings authored
atl2 includes NETIF_F_SG in hw_features even though it has no support for non-linear skbs. This bug was originally harmless since the driver does not claim to implement checksum offload and that used to be a requirement for SG. Now that SG and checksum offload are independent features, if you explicitly enable SG *and* use one of the rare protocols that can use SG without checkusm offload, this potentially leaks sensitive information (before you notice that it just isn't working). Therefore this obscure bug has been designated CVE-2016-2117. Reported-by:
Justin Yackoski <jyackoski@crypto-nite.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Fixes: ec5f0615 ("net: Kill link between CSUM and SG features.") Signed-off-by:
-
David S. Miller authored
Or Gerlitz says: ==================== Mellaox 40G driver fixes for 4.6-rc With the fix for ARM bug being under the works, these are few other fixes for mlx4 we have ready to go. Eran addressed the problematic/wrong reporting of dropped packets, Daniel fixed some matters related to PPC EEH's and Jenny's patch makes sure VFs can't change the port's pause settings. ==================== Signed-off-by: -
Eran Ben Elisha authored
Count SW packet drops per RX ring instead of a global counter. This will allow monitoring the number of rx drops per ring. In addition, SW rx_dropped counter was overwritten by HW rx_dropped counter, sum both of them instead to show the accurate value. Fixes: a3333b35 ('net/mlx4_en: Moderate ethtool callback to [...] ') Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Reported-by:
Brenden Blanco <bblanco@plumgrid.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Reported-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eugenia Emantayev authored
Currently changing global pause settings is done via SET_PORT command with input modifier GENERAL. This command is allowed for each VF since MTU setting is done via the same command. Change the above to the following scheme: before passing the request to the FW, the PF will check whether it was issued by a slave. If yes, don't change global pause and warn, otherwise change to the requested value and store for further reference. Signed-off-by:
Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by:
-
Daniel Jurgens authored
Maintain the PCI status and provide wrappers for enabling and disabling the PCI device. Performing the actions more than once without doing its opposite results in warning logs. This occurred when EEH hotplugged the device causing a warning for disabling an already disabled device. Fixes: 2ba5fbd6 ('net/mlx4_core: Handle AER flow properly') Signed-off-by:
Daniel Jurgens <danielj@mellanox.com> Signed-off-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
-
Daniel Jurgens authored
Move resume related activities to a new pci_resume function instead of performing them in mlx4_pci_slot_reset. This change is needed to avoid a hotplug during EEH recovery due to commit f2da4ccf ("powerpc/eeh: More relaxed hotplug criterion"). Fixes: 2ba5fbd6 ('net/mlx4_core: Handle AER flow properly') Signed-off-by:
-
Mark Brown authored
The ks8895 driver is using spi_dev_get() apparently just to take a copy of the SPI device used to instantiate it but never calls spi_dev_put() to free it. Since the device is guaranteed to exist between probe() and remove() there should be no need for the driver to take an extra reference to it so fix the leak by just using a straight assignment. Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Neil Armstrong authored
When the DaVinci emac driver is removed and re-probed, the actual pdev->dev.platform_data is populated with an unwanted valid pointer saved by the previous davinci_emac_of_get_pdata() call, causing a kernel crash when calling priv->int_disable() in emac_int_disable(). Unable to handle kernel paging request at virtual address c8622a80 ... [<c0426fb4>] (emac_int_disable) from [<c0427700>] (emac_dev_open+0x290/0x5f8) [<c0427700>] (emac_dev_open) from [<c04c00ec>] (__dev_open+0xb8/0x120) [<c04c00ec>] (__dev_open) from [<c04c0370>] (__dev_change_flags+0x88/0x14c) [<c04c0370>] (__dev_change_flags) from [<c04c044c>] (dev_change_flags+0x18/0x48) [<c04c044c>] (dev_change_flags) from [<c052bafc>] (devinet_ioctl+0x6b4/0x7ac) [<c052bafc>] (devinet_ioctl) from [<c04a1428>] (sock_ioctl+0x1d8/0x2c0) [<c04a1428>] (sock_ioctl) from [<c014f054>] (do_vfs_ioctl+0x41c/0x600) [<c014f054>] (do_vfs_ioctl) from [<c014f2a4>] (SyS_ioctl+0x6c/0x7c) [<c014f2a4>] (SyS_ioctl) from [<c000ff60>] (ret_fast_syscall+0x0/0x1c) Fixes: 42f59967 ("net: ethernet: davinci_emac: add OF support") Cc: Brian Hutchinson <b.hutchman@gmail.com> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Neil Armstrong authored
In order to avoid an Unbalanced pm_runtime_enable in the DaVinci emac driver when the device is removed and re-probed, and a pm_runtime_disable() call in davinci_emac_remove(). Actually, using unbind/bind on a TI DM8168 SoC gives : $ echo 4a120000.ethernet > /sys/bus/platform/drivers/davinci_emac/unbind net eth1: DaVinci EMAC: davinci_emac_remove() $ echo 4a120000.ethernet > /sys/bus/platform/drivers/davinci_emac/bind davinci_emac 4a120000.ethernet: Unbalanced pm_runtime_enable Cc: Brian Hutchinson <b.hutchman@gmail.com> Fixes: 3ba97381 ("net: ethernet: davinci_emac: add pm_runtime support") Signed-off-by:
-
David S. Miller authored
Manish Chopra says: ==================== qede: Bug fixes This series fixes - * various memory allocation failure flows for fastpath * issues with respect to driver GRO packets handling V1->V2 * Send series against net instead of net-next. Please consider applying this series to "net" ==================== Signed-off-by: -
Manish Chopra authored
In firmware assisted GRO flow there could be a single MTU sized segment arriving due to firmware aggregation timeout/last segment in an aggregation flow, which is not expected to be an actual gro packet. So If a skb has zero frags from the GRO flow then simply push it in the stack as non gso skb. Signed-off-by:
Manish Chopra <manish.chopra@qlogic.com> Signed-off-by:
Yuval Mintz <yuval.mintz@qlogic.com> Signed-off-by:
-
Manish Chopra authored
Skb's network header needs to be set before extracting IPv4/IPv6 headers from it. Signed-off-by:
-
Manish Chopra authored
This patch handles memory allocation failures for fastpath gracefully in the driver. Signed-off-by:
-
David S. Miller authored
Martin KaFai Lau says: ==================== tcp: Merge timestamp info when coalescing skbs This series is separated from the RFC series related to tcp_sendmsg(MSG_EOR) and it is targeting for the net branch. This patchset is focusing on fixing cases where TCP timestamp could be lost after coalescing skbs. A BPF prog is used to kprobe to sock_queue_err_skb() and print out the value of serr->ee.ee_data. The BPF prog (run-able from bcc) is attached here: BPF prog used for testing: ~~~~~ from __future__ import print_function from bcc import BPF bpf_text = """ int trace_err_skb(struct pt_regs *ctx) { struct sk_buff *skb = (struct sk_buff *)ctx->si; struct sock *sk = (struct sock *)ctx->di; struct sock_exterr_skb *serr; u32 ee_data = 0; if (!sk || !skb) return 0; serr = SKB_EXT_ERR(skb); bpf_probe_read(&ee_data, sizeof(ee_data), &serr->ee.ee_data); bpf_trace_printk("ee_data:%u\\n", ee_data); return 0; }; """ b = BPF(text=bpf_text) b.attach_kprobe(event="sock_queue_err_skb", fn_name="trace_err_skb") print("Attached to kprobe") b.trace_print() ==================== Signed-off-by: -
Martin KaFai Lau authored
After receiving sacks, tcp_shifted_skb() will collapse skbs if possible. tx_flags and tskey also have to be merged. This patch reuses the tcp_skb_collapse_tstamp() to handle them. BPF Output Before: ~~~~~ <no-output-due-to-missing-tstamp-event> BPF Output After: ~~~~~ <...>-2024 [007] d.s. 88.644374: : ee_data:14599 Packetdrill Script: ~~~~~ +0 `sysctl -q -w net.ipv4.tcp_min_tso_segs=10` +0 `sysctl -q -w net.ipv4.tcp_no_metrics_save=1` +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 0.100 < S 0:0(0) win 32792 <mss 1460,sackOK,nop,nop,nop,wscale 7> 0.100 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7> 0.200 < . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_TCP, TCP_NODELAY, [1], 4) = 0 0.200 write(4, ..., 1460) = 1460 +0 setsockopt(4, SOL_SOCKET, 37, [2688], 4) = 0 0.200 write(4, ..., 13140) = 13140 0.200 > P. 1:1461(1460) ack 1 0.200 > . 1461:8761(7300) ack 1 0.200 > P. 8761:14601(5840) ack 1 0.300 < . 1:1(0) ack 1 win 257 <sack 1461:14601,nop,nop> 0.300 > P. 1:1461(1460) ack 1 0.400 < . 1:1(0) ack 14601 win 257 0.400 close(4) = 0 0.400 > F. 14601:14601(0) ack 1 0.500 < F. 1:1(0) ack 14602 win 257 0.500 > . 14602:14602(0) ack 2 Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Tested-by:
-
Martin KaFai Lau authored
If two skbs are merged/collapsed during retransmission, the current logic does not merge the tx_flags and tskey. The end result is the SCM_TSTAMP_ACK timestamp could be missing for a packet. The patch: 1. Merge the tx_flags 2. Overwrite the prev_skb's tskey with the next_skb's tskey BPF Output Before: ~~~~~~ <no-output-due-to-missing-tstamp-event> BPF Output After: ~~~~~~ packetdrill-2092 [001] d.s. 453.998486: : ee_data:1459 Packetdrill Script: ~~~~~~ +0 `sysctl -q -w net.ipv4.tcp_min_tso_segs=10` +0 `sysctl -q -w net.ipv4.tcp_no_metrics_save=1` +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 0.100 < S 0:0(0) win 32792 <mss 1460,sackOK,nop,nop,nop,wscale 7> 0.100 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7> 0.200 < . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_TCP, TCP_NODELAY, [1], 4) = 0 0.200 write(4, ..., 730) = 730 +0 setsockopt(4, SOL_SOCKET, 37, [2688], 4) = 0 0.200 write(4, ..., 730) = 730 +0 setsockopt(4, SOL_SOCKET, 37, [2176], 4) = 0 0.200 write(4, ..., 11680) = 11680 +0 setsockopt(4, SOL_SOCKET, 37, [2688], 4) = 0 0.200 > P. 1:731(730) ack 1 0.200 > P. 731:1461(730) ack 1 0.200 > . 1461:8761(7300) ack 1 0.200 > P. 8761:13141(4380) ack 1 0.300 < . 1:1(0) ack 1 win 257 <sack 1461:2921,nop,nop> 0.300 < . 1:1(0) ack 1 win 257 <sack 1461:4381,nop,nop> 0.300 < . 1:1(0) ack 1 win 257 <sack 1461:5841,nop,nop> 0.300 > P. 1:1461(1460) ack 1 0.400 < . 1:1(0) ack 13141 win 257 0.400 close(4) = 0 0.400 > F. 13141:13141(0) ack 1 0.500 < F. 1:1(0) ack 13142 win 257 0.500 > . 13142:13142(0) ack 2 Signed-off-by:
-
Grygorii Strashko authored
The cpsw_ndo_open() could try to access CPSW registers before calling pm_runtime_get_sync(). This will trigger L3 error: WARNING: CPU: 0 PID: 21 at drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x220/0x34c() 44000000.ocp:L3 Custom Error: MASTER M2 (64-bit) TARGET L4_FAST (Idle): Data Access in Supervisor mode during Functional access and CPSW will stop functioning. Hence, fix it by moving pm_runtime_get_sync() before the first access to CPSW registers in cpsw_ndo_open(). Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
Martin KaFai Lau authored
Assuming SOF_TIMESTAMPING_TX_ACK is on. When dup acks are received, it could incorrectly think that a skb has already been acked and queue a SCM_TSTAMP_ACK cmsg to the sk->sk_error_queue. In tcp_ack_tstamp(), it checks 'between(shinfo->tskey, prior_snd_una, tcp_sk(sk)->snd_una - 1)'. If prior_snd_una == tcp_sk(sk)->snd_una like the following packetdrill script, between() returns true but the tskey is actually not acked. e.g. try between(3, 2, 1). The fix is to replace between() with one before() and one !before(). By doing this, the -1 offset on the tcp_sk(sk)->snd_una can also be removed. A packetdrill script is used to reproduce the dup ack scenario. Due to the lacking cmsg support in packetdrill (may be I cannot find it), a BPF prog is used to kprobe to sock_queue_err_skb() and print out the value of serr->ee.ee_data. Both the packetdrill and the bcc BPF script is attached at the end of this commit message. BPF Output Before Fix: ~~~~~~ <...>-2056 [001] d.s. 433.927987: : ee_data:1459 #incorrect packetdrill-2056 [001] d.s. 433.929563: : ee_data:1459 #incorrect packetdrill-2056 [001] d.s. 433.930765: : ee_data:1459 #incorrect packetdrill-2056 [001] d.s. 434.028177: : ee_data:1459 packetdrill-2056 [001] d.s. 434.029686: : ee_data:14599 BPF Output After Fix: ~~~~~~ <...>-2049 [000] d.s. 113.517039: : ee_data:1459 <...>-2049 [000] d.s. 113.517253: : ee_data:14599 BCC BPF Script: ~~~~~~ #!/usr/bin/env python from __future__ import print_function from bcc import BPF bpf_text = """ #include <uapi/linux/ptrace.h> #include <net/sock.h> #include <bcc/proto.h> #include <linux/errqueue.h> #ifdef memset #undef memset #endif int trace_err_skb(struct pt_regs *ctx) { struct sk_buff *skb = (struct sk_buff *)ctx->si; struct sock *sk = (struct sock *)ctx->di; struct sock_exterr_skb *serr; u32 ee_data = 0; if (!sk || !skb) return 0; serr = SKB_EXT_ERR(skb); bpf_probe_read(&ee_data, sizeof(ee_data), &serr->ee.ee_data); bpf_trace_printk("ee_data:%u\\n", ee_data); return 0; }; """ b = BPF(text=bpf_text) b.attach_kprobe(event="sock_queue_err_skb", fn_name="trace_err_skb") print("Attached to kprobe") b.trace_print() Packetdrill Script: ~~~~~~ +0 `sysctl -q -w net.ipv4.tcp_min_tso_segs=10` +0 `sysctl -q -w net.ipv4.tcp_no_metrics_save=1` +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 0.100 < S 0:0(0) win 32792 <mss 1460,sackOK,nop,nop,nop,wscale 7> 0.100 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7> 0.200 < . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_TCP, TCP_NODELAY, [1], 4) = 0 +0 setsockopt(4, SOL_SOCKET, 37, [2688], 4) = 0 0.200 write(4, ..., 1460) = 1460 0.200 write(4, ..., 13140) = 13140 0.200 > P. 1:1461(1460) ack 1 0.200 > . 1461:8761(7300) ack 1 0.200 > P. 8761:14601(5840) ack 1 0.300 < . 1:1(0) ack 1 win 257 <sack 1461:2921,nop,nop> 0.300 < . 1:1(0) ack 1 win 257 <sack 1461:4381,nop,nop> 0.300 < . 1:1(0) ack 1 win 257 <sack 1461:5841,nop,nop> 0.300 > P. 1:1461(1460) ack 1 0.400 < . 1:1(0) ack 14601 win 257 0.400 close(4) = 0 0.400 > F. 14601:14601(0) ack 1 0.500 < F. 1:1(0) ack 14602 win 257 0.500 > . 14602:14602(0) ack 2 Signed-off-by: -
Joe Stringer authored
This is the IPv6 counterpart to commit 8282f274 ("inet: frag: Always orphan skbs inside ip_defrag()"). Prior to commit 029f7f3b ("netfilter: ipv6: nf_defrag: avoid/free clone operations"), ipv6 fragments sent to nf_ct_frag6_gather() would be cloned (implicitly orphaning) prior to queueing for reassembly. As such, when the IPv6 message is eventually reassembled, the skb->sk for all fragments would be NULL. After that commit was introduced, rather than cloning, the original skbs were queued directly without orphaning. The end result is that all frags except for the first and last may have a socket attached. This commit explicitly orphans such skbs during nf_ct_frag6_gather() to prevent BUG_ON(skb->sk) during a later call to ip6_fragment(). kernel BUG at net/ipv6/ip6_output.c:631! [...] Call Trace: <IRQ> [<ffffffff810be8f7>] ? __lock_acquire+0x927/0x20a0 [<ffffffffa042c7c0>] ? do_output.isra.28+0x1b0/0x1b0 [openvswitch] [<ffffffff810bb8a2>] ? __lock_is_held+0x52/0x70 [<ffffffffa042c587>] ovs_fragment+0x1f7/0x280 [openvswitch] [<ffffffff810bdab5>] ? mark_held_locks+0x75/0xa0 [<ffffffff817be416>] ? _raw_spin_unlock_irqrestore+0x36/0x50 [<ffffffff81697ea0>] ? dst_discard_out+0x20/0x20 [<ffffffff81697e80>] ? dst_ifdown+0x80/0x80 [<ffffffffa042c703>] do_output.isra.28+0xf3/0x1b0 [openvswitch] [<ffffffffa042d279>] do_execute_actions+0x709/0x12c0 [openvswitch] [<ffffffffa04340a4>] ? ovs_flow_stats_update+0x74/0x1e0 [openvswitch] [<ffffffffa04340d1>] ? ovs_flow_stats_update+0xa1/0x1e0 [openvswitch] [<ffffffff817be387>] ? _raw_spin_unlock+0x27/0x40 [<ffffffffa042de75>] ovs_execute_actions+0x45/0x120 [openvswitch] [<ffffffffa0432d65>] ovs_dp_process_packet+0x85/0x150 [openvswitch] [<ffffffff817be387>] ? _raw_spin_unlock+0x27/0x40 [<ffffffffa042def4>] ovs_execute_actions+0xc4/0x120 [openvswitch] [<ffffffffa0432d65>] ovs_dp_process_packet+0x85/0x150 [openvswitch] [<ffffffffa04337f2>] ? key_extract+0x442/0xc10 [openvswitch] [<ffffffffa043b26d>] ovs_vport_receive+0x5d/0xb0 [openvswitch] [<ffffffff810be8f7>] ? __lock_acquire+0x927/0x20a0 [<ffffffff810be8f7>] ? __lock_acquire+0x927/0x20a0 [<ffffffff810be8f7>] ? __lock_acquire+0x927/0x20a0 [<ffffffff817be416>] ? _raw_spin_unlock_irqrestore+0x36/0x50 [<ffffffffa043c11d>] internal_dev_xmit+0x6d/0x150 [openvswitch] [<ffffffffa043c0b5>] ? internal_dev_xmit+0x5/0x150 [openvswitch] [<ffffffff8168fb5f>] dev_hard_start_xmit+0x2df/0x660 [<ffffffff8168f5ea>] ? validate_xmit_skb.isra.105.part.106+0x1a/0x2b0 [<ffffffff81690925>] __dev_queue_xmit+0x8f5/0x950 [<ffffffff81690080>] ? __dev_queue_xmit+0x50/0x950 [<ffffffff810bdab5>] ? mark_held_locks+0x75/0xa0 [<ffffffff81690990>] dev_queue_xmit+0x10/0x20 [<ffffffff8169a418>] neigh_resolve_output+0x178/0x220 [<ffffffff81752759>] ? ip6_finish_output2+0x219/0x7b0 [<ffffffff81752759>] ip6_finish_output2+0x219/0x7b0 [<ffffffff817525a5>] ? ip6_finish_output2+0x65/0x7b0 [<ffffffff816cde2b>] ? ip_idents_reserve+0x6b/0x80 [<ffffffff8175488f>] ? ip6_fragment+0x93f/0xc50 [<ffffffff81754af1>] ip6_fragment+0xba1/0xc50 [<ffffffff81752540>] ? ip6_flush_pending_frames+0x40/0x40 [<ffffffff81754c6b>] ip6_finish_output+0xcb/0x1d0 [<ffffffff81754dcf>] ip6_output+0x5f/0x1a0 [<ffffffff81754ba0>] ? ip6_fragment+0xc50/0xc50 [<ffffffff81797fbd>] ip6_local_out+0x3d/0x80 [<ffffffff817554df>] ip6_send_skb+0x2f/0xc0 [<ffffffff817555bd>] ip6_push_pending_frames+0x4d/0x50 [<ffffffff817796cc>] icmpv6_push_pending_frames+0xac/0xe0 [<ffffffff8177a4be>] icmpv6_echo_reply+0x42e/0x500 [<ffffffff8177acbf>] icmpv6_rcv+0x4cf/0x580 [<ffffffff81755ac7>] ip6_input_finish+0x1a7/0x690 [<ffffffff81755925>] ? ip6_input_finish+0x5/0x690 [<ffffffff817567a0>] ip6_input+0x30/0xa0 [<ffffffff81755920>] ? ip6_rcv_finish+0x1a0/0x1a0 [<ffffffff817557ce>] ip6_rcv_finish+0x4e/0x1a0 [<ffffffff8175640f>] ipv6_rcv+0x45f/0x7c0 [<ffffffff81755fe6>] ? ipv6_rcv+0x36/0x7c0 [<ffffffff81755780>] ? ip6_make_skb+0x1c0/0x1c0 [<ffffffff8168b649>] __netif_receive_skb_core+0x229/0xb80 [<ffffffff810bdab5>] ? mark_held_locks+0x75/0xa0 [<ffffffff8168c07f>] ? process_backlog+0x6f/0x230 [<ffffffff8168bfb6>] __netif_receive_skb+0x16/0x70 [<ffffffff8168c088>] process_backlog+0x78/0x230 [<ffffffff8168c0ed>] ? process_backlog+0xdd/0x230 [<ffffffff8168db43>] net_rx_action+0x203/0x480 [<ffffffff810bdab5>] ? mark_held_locks+0x75/0xa0 [<ffffffff817c156e>] __do_softirq+0xde/0x49f [<ffffffff81752768>] ? ip6_finish_output2+0x228/0x7b0 [<ffffffff817c070c>] do_softirq_own_stack+0x1c/0x30 <EOI> [<ffffffff8106f88b>] do_softirq.part.18+0x3b/0x40 [<ffffffff8106f946>] __local_bh_enable_ip+0xb6/0xc0 [<ffffffff81752791>] ip6_finish_output2+0x251/0x7b0 [<ffffffff81754af1>] ? ip6_fragment+0xba1/0xc50 [<ffffffff816cde2b>] ? ip_idents_reserve+0x6b/0x80 [<ffffffff8175488f>] ? ip6_fragment+0x93f/0xc50 [<ffffffff81754af1>] ip6_fragment+0xba1/0xc50 [<ffffffff81752540>] ? ip6_flush_pending_frames+0x40/0x40 [<ffffffff81754c6b>] ip6_finish_output+0xcb/0x1d0 [<ffffffff81754dcf>] ip6_output+0x5f/0x1a0 [<ffffffff81754ba0>] ? ip6_fragment+0xc50/0xc50 [<ffffffff81797fbd>] ip6_local_out+0x3d/0x80 [<ffffffff817554df>] ip6_send_skb+0x2f/0xc0 [<ffffffff817555bd>] ip6_push_pending_frames+0x4d/0x50 [<ffffffff81778558>] rawv6_sendmsg+0xa28/0xe30 [<ffffffff81719097>] ? inet_sendmsg+0xc7/0x1d0 [<ffffffff817190d6>] inet_sendmsg+0x106/0x1d0 [<ffffffff81718fd5>] ? inet_sendmsg+0x5/0x1d0 [<ffffffff8166d078>] sock_sendmsg+0x38/0x50 [<ffffffff8166d4d6>] SYSC_sendto+0xf6/0x170 [<ffffffff8100201b>] ? trace_hardirqs_on_thunk+0x1b/0x1d [<ffffffff8166e38e>] SyS_sendto+0xe/0x10 [<ffffffff817bebe5>] entry_SYSCALL_64_fastpath+0x18/0xa8 Code: 06 48 83 3f 00 75 26 48 8b 87 d8 00 00 00 2b 87 d0 00 00 00 48 39 d0 72 14 8b 87 e4 00 00 00 83 f8 01 75 09 48 83 7f 18 00 74 9a <0f> 0b 41 8b 86 cc 00 00 00 49 8# RIP [<ffffffff8175468a>] ip6_fragment+0x73a/0xc50 RSP <ffff880072803120> Fixes: 029f7f3b ("netfilter: ipv6: nf_defrag: avoid/free clone operations") Reported-by:
Daniele Di Proietto <diproiettod@vmware.com> Signed-off-by:
Joe Stringer <joe@ovn.org> Signed-off-by:
-
- 20 Apr, 2016 5 commits
-
-
Andrew Goodbody authored
This reverts commit cfe25560 This can result in a "Unable to handle kernel paging request" during boot. This was due to using an uninitialised struct member, data->slaves. Signed-off-by:
Andrew Goodbody <andrew.goodbody@cambrionix.com> Tested-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Jorgen Hansen authored
If skb_recv_datagram returns an skb, we should ignore the err value returned. Otherwise, datagram receives will return EAGAIN when they have to wait for a datagram. Acked-by:
Adit Ranadive <aditr@vmware.com> Signed-off-by:
Jorgen Hansen <jhansen@vmware.com> Signed-off-by:
-
Konstantin Khlebnikov authored
skb->sk could point to timewait or request socket which has no sk_classid. Detected as "BUG: KASAN: slab-out-of-bounds in cls_cgroup_classify". Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by:
-
Konstantin Khlebnikov authored
This patch fixes couple error paths after allocation failures. Atomic set of page reference counter is safe only if it is zero, otherwise set can race with any speculative get_page_unless_zero. Signed-off-by:
-
Konstantin Khlebnikov authored
High order pages are optional here since commit 51151a16 ("mlx4: allow order-0 memory allocations in RX path"), so here is no reason for depleting reserves. Generic __netdev_alloc_frag() implements the same logic. Signed-off-by:
-
- 17 Apr, 2016 2 commits
-
-
Arnd Bergmann authored
The new MACsec driver uses the AES crypto algorithm, but can be configured even if CONFIG_CRYPTO is disabled, leading to a build error: warning: (MAC80211 && MACSEC) selects CRYPTO_GCM which has unmet direct dependencies (CRYPTO) warning: (BT && CEPH_LIB && INET && MAC802154 && MAC80211 && BLK_DEV_RBD && MACSEC && AIRO_CS && LIBIPW && HOSTAP && USB_WUSB && RTLLIB_CRYPTO_CCMP && FS_ENCRYPTION && EXT4_ENCRYPTION && CEPH_FS && BIG_KEYS && ENCRYPTED_KEYS) selects CRYPTO_AES which has unmet direct dependencies (CRYPTO) crypto/built-in.o: In function `gcm_enc_copy_hash': aes_generic.c:(.text+0x2b8): undefined reference to `crypto_xor' aes_generic.c:(.text+0x2dc): undefined reference to `scatterwalk_map_and_copy' This adds an explicit 'select CRYPTO' statement the way that other drivers handle it. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by:
-
Eric Dumazet authored
On 64bit kernels, device stats are 64bit wide, not 32bit. Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by:
-
- 16 Apr, 2016 7 commits
-
-
David S. Miller authored
Vivien Didelot says: ==================== net: dsa: mv88e6xxx: fix hardware cross-chip bridging In order to accelerate cross-chip switching of frames with the hardware, the DSA Tag ports, used to interconnect switch devices, must learn SA and DA addresses, and share the same FDB with the user ports. The two first patches restore address learning on DSA links. This fixes hardware cross-chip bridging in a VLAN filtering enabled system, which implements a bridge group as a 802.1Q VLAN and thus share an isolated address database between DSA and user ports. The third patch changes the distinct default databases used for each port, to the same address database. This fixes the hardware cross-chip bridging in a VLAN filtering disabled system, where a bridge group gets implemented only as a port-based VLAN. ==================== Signed-off-by: -
Vivien Didelot authored
For hardware cross-chip bridging to work, user ports *and* DSA ports need to share a common address database, in order to switch a frame to the correct interconnected device. This is currently working for VLAN filtering aware systems, since Linux will implement a bridge group as a 802.1Q VLAN, which has its own FDB, including DSA and CPU links as members. However when the system doesn't support VLAN filtering, Linux only relies on the port-based VLAN to implement a bridge group. To fix hardware cross-chip bridging for such systems, set the same default address database 0 for user and DSA ports, instead of giving them all a different default database. Note that the bridging code prevents frames to egress between unbridged ports, and flushes FDB entries of a port when changing its STP state. Also note that the FID 0 is special and means "all" for ATU operations, but it's OK since it is used as a default forwarding address database. Fixes: 2db9ce1f ("net: dsa: mv88e6xxx: assign default FDB to ports") Fixes: 466dfa07 ("net: dsa: mv88e6xxx: assign dynamic FDB to bridges") Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
-
Vivien Didelot authored
In multi-chip systems, DSA Tag ports must learn SA addresses in order to correctly switch frames between interconnected chips. This fixes cross-chip hardware bridging in a VLAN filtering aware system, because a bridge group gets implemented as an hardware 802.1Q VLAN and thus DSA and user ports share the same FDB. Fixes: 4c7ea3c0 ("net: dsa: mv88e6xxx: disable SA learning for DSA and CPU ports") Signed-off-by:
-
Vivien Didelot authored
Locking a port generates an hardware interrupt when a new SA address is received. This enables CPU directed learning, which is needed for 802.1X MAC authentication. To disable automatic learning on a port, the only configuration needed is to set its Port Association Vector to all zero. Clear PAV when SA learning should be disabled instead of locking a port. Fixes: 4c7ea3c0 ("net: dsa: mv88e6xxx: disable SA learning for DSA and CPU ports") Signed-off-by:
-
santosh.shilimkar@oracle.com authored
Two different threads with different rds sockets may be in rds_recv_rcvbuf_delta() via receive path. If their ports both map to the same word in the congestion map, then using non-atomic ops to update it could cause the map to be incorrect. Lets use atomics to avoid such an issue. Full credit to Wengang <wen.gang.wang@oracle.com> for finding the issue, analysing it and also pointing out to offending code with spin lock based fix. Reviewed-by:
Leon Romanovsky <leon@leon.nu> Signed-off-by:
Wengang Wang <wen.gang.wang@oracle.com> Signed-off-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Qing Huang authored
dp->dp_ack_seq is used in big endian format. We need to do the big endianness conversion when we assign a value in host format to it. Signed-off-by:
Qing Huang <qing.huang@oracle.com> Signed-off-by:
-
Daniel Borkmann authored
When __vlan_insert_tag() fails from skb_vlan_push() path due to the skb_cow_head(), we need to undo the __skb_push() in the error path as well that was done earlier to move skb->data pointer to mac header. Moreover, I noticed that when in the non-error path the __skb_pull() is done and the original offset to mac header was non-zero, we fixup from a wrong skb->data offset in the checksum complete processing. So the skb_postpush_rcsum() really needs to be done before __skb_pull() where skb->data still points to the mac header start and thus operates under the same conditions as in __vlan_insert_tag(). Fixes: 93515d53 ("net: move vlan pop/push functions into common code") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
- 15 Apr, 2016 5 commits
-
-
Andrew Goodbody authored
Adding a 2nd PHY to cpsw results in a NULL pointer dereference as below. Fix by maintaining a reference to each PHY node in slave struct instead of a single reference in the priv struct which was overwritten by the 2nd PHY. [ 17.870933] Unable to handle kernel NULL pointer dereference at virtual address 00000180 [ 17.879557] pgd = dc8bc000 [ 17.882514] [00000180] *pgd=9c882831, *pte=00000000, *ppte=00000000 [ 17.889213] Internal error: Oops: 17 [#1] ARM [ 17.893838] Modules linked in: [ 17.897102] CPU: 0 PID: 1657 Comm: connmand Not tainted 4.5.0-ge463dfb-dirty #11 [ 17.904947] Hardware name: Cambrionix whippet [ 17.909576] task: dc859240 ti: dc968000 task.ti: dc968000 [ 17.915339] PC is at phy_attached_print+0x18/0x8c [ 17.920339] LR is at phy_attached_info+0x14/0x18 [ 17.925247] pc : [<c042baec>] lr : [<c042bb74>] psr: 600f0113 [ 17.925247] sp : dc969cf8 ip : dc969d28 fp : dc969d18 [ 17.937425] r10: dda7a400 r9 : 00000000 r8 : 00000000 [ 17.942971] r7 : 00000001 r6 : ddb00480 r5 : ddb8cb34 r4 : 00000000 [ 17.949898] r3 : c0954cc0 r2 : c09562b0 r1 : 00000000 r0 : 00000000 [ 17.956829] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 17.964401] Control: 10c5387d Table: 9c8bc019 DAC: 00000051 [ 17.970500] Process connmand (pid: 1657, stack limit = 0xdc968210) [ 17.977059] Stack: (0xdc969cf8 to 0xdc96a000) [ 17.981692] 9ce0: dc969d28 dc969d08 [ 17.990386] 9d00: c038f9bc c038f6b4 ddb00480 dc969d34 dc969d28 c042bb74 c042bae4 00000000 [ 17.999080] 9d20: c09562b0 c0954cc0 dc969d5c dc969d38 c043ebfc c042bb6c 00000007 00000003 [ 18.007773] 9d40: ddb00000 ddb8cb58 ddb00480 00000001 dc969dec dc969d60 c0441614 c043ea68 [ 18.016465] 9d60: 00000000 00000003 00000000 fffffff4 dc969df4 0000000d 00000000 00000000 [ 18.025159] 9d80: dc969db4 dc969d90 c005dc08 c05839e0 dc969df4 0000000d ddb00000 00001002 [ 18.033851] 9da0: 00000000 00000000 dc969dcc dc969db8 c005ddf4 c005dbc8 00000000 00000118 [ 18.042544] 9dc0: dc969dec dc969dd0 ddb00000 c06db27c ffff9003 00001002 00000000 00000000 [ 18.051237] 9de0: dc969e0c dc969df0 c057c88c c04410dc dc969e0c ddb00000 ddb00000 00000001 [ 18.059930] 9e00: dc969e34 dc969e10 c057cb44 c057c7d8 ddb00000 ddb00138 00001002 beaeda20 [ 18.068622] 9e20: 00000000 00000000 dc969e5c dc969e38 c057cc28 c057cac0 00000000 dc969e80 [ 18.077315] 9e40: dda7a40c beaeda20 00000000 00000000 dc969ecc dc969e60 c05e36d0 c057cc14 [ 18.086007] 9e60: dc969e84 00000051 beaeda20 00000000 dda7a40c 00000014 ddb00000 00008914 [ 18.094699] 9e80: 30687465 00000000 00000000 00000000 00009003 00000000 00000000 00000000 [ 18.103391] 9ea0: 00001002 00008914 dd257ae0 beaeda20 c098a428 beaeda20 00000011 00000000 [ 18.112084] 9ec0: dc969edc dc969ed0 c05e4e54 c05e3030 dc969efc dc969ee0 c055f5ac c05e4cc4 [ 18.120777] 9ee0: beaeda20 dd257ae0 dc8ab4c0 00008914 dc969f7c dc969f00 c010b388 c055f45c [ 18.129471] 9f00: c071ca40 dd257ac0 c00165e8 dc968000 dc969f3c dc969f20 dc969f64 dc969f28 [ 18.138164] 9f20: c0115708 c0683ec8 dd257ac0 dd257ac0 dc969f74 dc969f40 c055f350 c00fc66c [ 18.146857] 9f40: dd82e4d0 00000011 00000000 00080000 dd257ac0 00000000 dc8ab4c0 dc8ab4c0 [ 18.155550] 9f60: 00008914 beaeda20 00000011 00000000 dc969fa4 dc969f80 c010bc34 c010b2fc [ 18.164242] 9f80: 00000000 00000011 00000002 00000036 c00165e8 dc968000 00000000 dc969fa8 [ 18.172935] 9fa0: c00163e0 c010bbcc 00000000 00000011 00000011 00008914 beaeda20 00009003 [ 18.181628] 9fc0: 00000000 00000011 00000002 00000036 00081018 00000001 00000000 beaedc10 [ 18.190320] 9fe0: 00083188 beaeda1c 00043a5d b6d29c0c 600b0010 00000011 00000000 00000000 [ 18.198989] Backtrace: [ 18.201621] [<c042bad8>] (phy_attached_print) from [<c042bb74>] (phy_attached_info+0x14/0x18) [ 18.210664] r3:c0954cc0 r2:c09562b0 r1:00000000 [ 18.215588] r4:ddb00480 [ 18.218322] [<c042bb60>] (phy_attached_info) from [<c043ebfc>] (cpsw_slave_open+0x1a0/0x280) [ 18.227293] [<c043ea5c>] (cpsw_slave_open) from [<c0441614>] (cpsw_ndo_open+0x544/0x674) [ 18.235874] r7:00000001 r6:ddb00480 r5:ddb8cb58 r4:ddb00000 [ 18.241944] [<c04410d0>] (cpsw_ndo_open) from [<c057c88c>] (__dev_open+0xc0/0x128) [ 18.249972] r9:00000000 r8:00000000 r7:00001002 r6:ffff9003 r5:c06db27c r4:ddb00000 [ 18.258255] [<c057c7cc>] (__dev_open) from [<c057cb44>] (__dev_change_flags+0x90/0x154) [ 18.266745] r5:00000001 r4:ddb00000 [ 18.270575] [<c057cab4>] (__dev_change_flags) from [<c057cc28>] (dev_change_flags+0x20/0x50) [ 18.279523] r9:00000000 r8:00000000 r7:beaeda20 r6:00001002 r5:ddb00138 r4:ddb00000 [ 18.287811] [<c057cc08>] (dev_change_flags) from [<c05e36d0>] (devinet_ioctl+0x6ac/0x76c) [ 18.296483] r9:00000000 r8:00000000 r7:beaeda20 r6:dda7a40c r5:dc969e80 r4:00000000 [ 18.304762] [<c05e3024>] (devinet_ioctl) from [<c05e4e54>] (inet_ioctl+0x19c/0x1c8) [ 18.312882] r10:00000000 r9:00000011 r8:beaeda20 r7:c098a428 r6:beaeda20 r5:dd257ae0 [ 18.321235] r4:00008914 [ 18.323956] [<c05e4cb8>] (inet_ioctl) from [<c055f5ac>] (sock_ioctl+0x15c/0x2d8) [ 18.331829] [<c055f450>] (sock_ioctl) from [<c010b388>] (do_vfs_ioctl+0x98/0x8d0) [ 18.339765] r7:00008914 r6:dc8ab4c0 r5:dd257ae0 r4:beaeda20 [ 18.345822] [<c010b2f0>] (do_vfs_ioctl) from [<c010bc34>] (SyS_ioctl+0x74/0x84) [ 18.353573] r10:00000000 r9:00000011 r8:beaeda20 r7:00008914 r6:dc8ab4c0 r5:dc8ab4c0 [ 18.361924] r4:00000000 [ 18.364653] [<c010bbc0>] (SyS_ioctl) from [<c00163e0>] (ret_fast_syscall+0x0/0x3c) [ 18.372682] r9:dc968000 r8:c00165e8 r7:00000036 r6:00000002 r5:00000011 r4:00000000 [ 18.380960] Code: e92dd810 e24cb010 e24dd010 e59b4004 (e5902180) [ 18.387580] ---[ end trace c80529466223f3f3 ]--- Signed-off-by:
-
Felix Fietkau authored
Only core revisions older than 4 use BGMAC_CMDCFG_SR_REV0. This mainly fixes support for BCM4708A0KF SoCs with Ethernet core rev 5 (it means only some devices as most of BCM4708A0KF-s got core rev 4). This was tested for regressions on BCM47094 which doesn't seem to care which bit gets used. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
-
David S. Miller authored
Craig Gallek says: ==================== Fixes for SO_REUSEPORT and mixed v4/v6 sockets Recent changes to the datastructures associated with SO_REUSEPORT broke an existing behavior when equivalent SO_REUSEPORT sockets are created using both AF_INET and AF_INET6. This patch series restores the previous behavior and includes a test to validate it. This series should be a trivial merge to stable kernels (if deemed necessary), but will have conflicts in net-next. The following patches recently replaced the use of hlist_nulls with hlists for UDP and TCP socket lists: ca065d0c ("udp: no longer use SLAB_DESTROY_BY_RCU") 3b24d854 ("tcp/dccp: do not touch listener sk_refcnt under synflood") If this series is accepted, I will send an RFC for the net-next change to assist with the merge. ==================== Signed-off-by:
-
Craig Gallek authored
Test to validate the behavior of SO_REUSEPORT sockets that are created with both AF_INET and AF_INET6. See the commit prior to this for a description of this behavior. Signed-off-by:
Craig Gallek <kraig@google.com> Signed-off-by:
-
Craig Gallek authored
With the SO_REUSEPORT socket option, it is possible to create sockets in the AF_INET and AF_INET6 domains which are bound to the same IPv4 address. This is only possible with SO_REUSEPORT and when not using IPV6_V6ONLY on the AF_INET6 sockets. Prior to the commits referenced below, an incoming IPv4 packet would always be routed to a socket of type AF_INET when this mixed-mode was used. After those changes, the same packet would be routed to the most recently bound socket (if this happened to be an AF_INET6 socket, it would have an IPv4 mapped IPv6 address). The change in behavior occurred because the recent SO_REUSEPORT optimizations short-circuit the socket scoring logic as soon as they find a match. They did not take into account the scoring logic that favors AF_INET sockets over AF_INET6 sockets in the event of a tie. To fix this problem, this patch changes the insertion order of AF_INET and AF_INET6 addresses in the TCP and UDP socket lists when the sockets have SO_REUSEPORT set. AF_INET sockets will be inserted at the head of the list and AF_INET6 sockets with SO_REUSEPORT set will always be inserted at the tail of the list. This will force AF_INET sockets to always be considered first. Fixes: e32ea7e7 ("soreuseport: fast reuseport UDP socket selection") Fixes: 125e80b88687 ("soreuseport: fast reuseport TCP socket selection") Reported-by:
Maciej Żenczykowski <maze@google.com> Signed-off-by:
-
