Skip to content

L
linux
Switch branch/tag
  1. 28 Jul, 2021 1 commit
  3. 26 Jul, 2021 12 commits
  5. 25 Jul, 2021 14 commits
  7. 24 Jul, 2021 1 commit
  9. 23 Jul, 2021 12 commits
    • David S. Miller's avatar
      Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue · facfbf4f
      David S. Miller authored 
      Tony Nguyen says:

====================
1GbE Intel Wired LAN Driver Updates 2021-07-23

This series contains updates to igb and e100 drivers.

Grzegorz adds a timeout check to prevent possible infinite loop for igb.

Kees Cook adjusts memcpy() argument to represent the entire structure
to allow for appropriate bounds checking for igb and e100.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      facfbf4f
    • chongjiapeng's avatar
      net: phy: Remove unused including <linux/version.h> · 94a994d2
      chongjiapeng authored 
      Eliminate the follow versioncheck warning:

./drivers/net/phy/mxl-gpy.c: 9 linux/version.h not needed.
Reported-by: default avatarAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: default avatarchongjiapeng <jiapeng.chong@linux.alibaba.com>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Reviewed-by: default avatarRussell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      94a994d2
    • Krzysztof Kozlowski's avatar
      nfc: port100: constify protocol list array · c65e7025
      Krzysztof Kozlowski authored 
      File-scope "port100_protocol" array is read-only and passed as pointer
to const, so it can be made a const to increase code safety.
Signed-off-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c65e7025
    • Kangmin Park's avatar
      mpls: defer ttl decrement in mpls_forward() · 6a6b83ca
      Kangmin Park authored 
      Defer ttl decrement to optimize in tx_err case. There is no need
to decrease ttl in the case of goto tx_err.
Signed-off-by: default avatarKangmin Park <l4stpr0gr4m@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6a6b83ca
    • Loic Poulain's avatar
      wwan: core: Fix missing RTM_NEWLINK event for default link · 8cc236db
      Loic Poulain authored 
      A wwan link created via the wwan_create_default_link procedure is
never notified to the user (RTM_NEWLINK), causing issues with user
tools relying on such event to track network links (NetworkManager).

This is because the procedure misses a call to rtnl_configure_link(),
which sets the link as initialized and notifies the new link (cf
proper usage in __rtnl_newlink()).

Cc: stable@vger.kernel.org
Fixes: ca374290 ("wwan: core: support default netdev creation")
Suggested-by: default avatarSergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: default avatarLoic Poulain <loic.poulain@linaro.org>
Acked-by: default avatarSergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8cc236db
    • Jerin Jacob's avatar
      octeontx2-af: Enhance mailbox trace entry · 3bdba2c7
      Jerin Jacob authored 
      Added mailbox id to name translation on trace entry for
better tracing output.

Before the change:
otx2_msg_process: [0002:01:00.0] msg:(0x03) error:0

After the change:
otx2_msg_process: [0002:01:00.0] msg:(DETACH_RESOURCES) error:0
Signed-off-by: default avatarJerin Jacob <jerinj@marvell.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3bdba2c7
    • Kees Cook's avatar
      e100: Avoid memcpy() over-reading of ETH_SS_STATS · cd74f25b
      Kees Cook authored 
      In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally reading across neighboring array fields.

The memcpy() is copying the entire structure, not just the first array.
Adjust the source argument so the compiler can do appropriate bounds
checking.
Signed-off-by: default avatarKees Cook <keescook@chromium.org>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      cd74f25b
    • Kees Cook's avatar
      igb: Avoid memcpy() over-reading of ETH_SS_STATS · c9183f45
      Kees Cook authored 
      In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally reading across neighboring array fields.

The memcpy() is copying the entire structure, not just the first array.
Adjust the source argument so the compiler can do appropriate bounds
checking.
Signed-off-by: default avatarKees Cook <keescook@chromium.org>
Tested-by: default avatarTony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      c9183f45
    • Grzegorz Siwik's avatar
      igb: Add counter to i21x doublecheck · 07be39e3
      Grzegorz Siwik authored 
      Add failed_counter to i21x_doublecheck(). There is possibility that
loop will never end.
With this patch the loop will stop after maximum 3 retries
to write to MTA_REGISTER
Signed-off-by: default avatarGrzegorz Siwik <grzegorz.siwik@intel.com>
Tested-by: default avatarTony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      07be39e3
    • David S. Miller's avatar
      Merge branch 'bridge-tx-fwd' · 356ae88f
      David S. Miller authored 
      Vladimir Oltean says:

====================
Allow TX forwarding for the software bridge data path to be offloaded to capable devices

On RX, switchdev drivers have the ability to mark packets for the
software bridge as "already forwarded in hardware" via
skb->offload_fwd_mark. This instructs the nbp_switchdev_allowed_egress()
function to perform software forwarding of that packet only to the bridge
ports that are not in the same hardware domain as the source packet.

This series expands the concept for TX, in the sense that we can trust
the accelerator to:
(a) look up its FDB (which is more or less in sync with the software
    bridge FDB) for selecting the destination ports for a packet
(b) replicate the frame in hardware in case it's a multicast/broadcast,
    instead of the software bridge having to clone it and send the
    clones to each net device one at a time. This reduces the bandwidth
    needed between the CPU and the accelerator, as well as the CPU time
    spent.

This is done by augmenting nbp_switchdev_allowed_egress() to also
exclude the bridge ports which have the tx_fwd_offload capability if the
skb has already been transmitted to one port from their hardware domain.

Even though in reality, the software bridge still technically looks up
the FDB/MDB for every frame, but all skb clones are suppressed, this
offload specifically requires that the switchdev accelerator looks up
its FDB/MDB again. It is intended to be used to inject "data plane
packets" into the hardware as opposed to "control plane packets" which
target a precise destination port.

Towards that goal, the bridge always provides the TX packets with
skb->offload_fwd_mark = true with the VLAN tag always present, so that
the accelerator can forward according to that VLAN broadcast domain.

This work is not intended to cater to switches which can inject control
plane packets to a bit mask of destination ports. I see that as a more
difficult task to accomplish with potentially less benefits (it provides
only replication offload). The reason it is more difficult is that
struct skb_buff would probably need to be extended to contain a list of
struct net_devices that the packet must be replicated to. Sending data
plane packets avoids that issue by keeping the hardware and software FDB
more or less in sync and looking it up twice.

Additionally, the ability for the software bridge to request data plane
packets to be sent brings the opportunity for "dumb switches" to support
traffic termination to/from the bridge. Such switches (DSA or otherwise)
typically only use control packets for link-local traps, and sending or
receiving a control packet is an expensive operation.

For this class of switches, this patch series makes the difference
between supporting and not supporting local IP termination through a
VLAN-aware bridge, bridging with a foreign interface, bridging with
software upper interfaces like LAG, etc. So instead of telling them
"oh, what a dumb switch you are!", we can now tell them "oh, what a
stark contrast you have between the control and data plane!".

Patches 1-3 tested on Turris MOX (3 mv88e6xxx switches in a daisy chain
topology) and a second DSA driver to be added soon. Patches 4-5 tested
only on Turris MOX.

===========================================================

Changes in v5:
- make sure the static key is decremented on bridge port unoffload
- rename functions and variables so that the "tx_fwd_offload" string is
  easy to grep across the git tree
- simplify DSA core bookkeeping of the bridge_num

===========================================================

Changes in v4:

The biggest change compared to the previous series is not present in the
patches, but is rather a lack of them. Previously we were replaying
switchdev objects on the public notifier chain, but that was a mistake
in my reasoning and it was reverted for v4. Therefore, we are now
passing the notifier blocks as arguments to switchdev_bridge_port_offload()
for all drivers. This alone gets rid of 7 patches compared to v3.

Other changes are:
- Take more care for the case where mlxsw leaves a VLAN or LAG upper
  that is a bridge port, make sure that switchdev_bridge_port_unoffload()
  gets called for that case
- A couple of DSA bug fixes
- Add change logs for all patches
- Copy all switchdev driver maintainers on the changes relevant to them

===========================================================

Message for v3:
https://patchwork.kernel.org/project/netdevbpf/cover/20210712152142.800651-1-vladimir.oltean@nxp.com/

In this submission I have introduced a "native switchdev" driver API to
signal whether the TX forwarding offload is supported or not. This comes
after a third person has said that the macvlan offload framework used
for v2 and v1 was simply too convoluted.

This large patch set is submitted for discussion purposes (it is
provided in its entirety so it can be applied & tested on net-next).
It is only minimally tested, and yet I will not copy all switchdev
driver maintainers until we agree on the viability of this approach.

The major changes compared to v2:
- The introduction of switchdev_bridge_port_offload() and
  switchdev_bridge_port_unoffload() as two major API changes from the
  perspective of a switchdev driver. All drivers were converted to call
  these.
- Augment switchdev_bridge_port_{,un}offload to also handle the
  switchdev object replays on port join/leave.
- Augment switchdev_bridge_port_offload to also signal whether the TX
  forwarding offload is supported.

===========================================================

Message for v2:
https://patchwork.kernel.org/project/netdevbpf/cover/20210703115705.1034112-1-vladimir.oltean@nxp.com/

For this series I have taken Tobias' work from here:
https://patchwork.kernel.org/project/netdevbpf/cover/20210426170411.1789186-1-tobias@waldekranz.com/
and made the following changes:
- I collected and integrated (hopefully all of) Nikolay's, Ido's and my
  feedback on the bridge driver changes. Otherwise, the structure of the
  bridge changes is pretty much the same as Tobias left it.
- I basically rewrote the DSA infrastructure for the data plane
  forwarding offload, based on the commonalities with another switch
  driver for which I implemented this feature (not submitted here)
- I adapted mv88e6xxx to use the new infrastructure, hopefully it still
  works but I didn't test that
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      356ae88f
    • Tobias Waldekranz's avatar
      net: dsa: tag_dsa: offload the bridge forwarding process · d82f8ab0
      Tobias Waldekranz authored 
      Allow the DSA tagger to generate FORWARD frames for offloaded skbs
sent from a bridge that we offload, allowing the switch to handle any
frame replication that may be required. This also means that source
address learning takes place on packets sent from the CPU, meaning
that return traffic no longer needs to be flooded as unknown unicast.
Signed-off-by: default avatarTobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d82f8ab0
    • Vladimir Oltean's avatar
      net: dsa: mv88e6xxx: map virtual bridges with forwarding offload in the PVT · ce5df689
      Vladimir Oltean authored 
      The mv88e6xxx switches have the ability to receive FORWARD (data plane)
frames from the CPU port and route them according to the FDB. We can use
this to offload the forwarding process of packets sent by the software
bridge.

Because DSA supports bridge domain isolation between user ports, just
sending FORWARD frames is not enough, as they might leak the intended
broadcast domain of the bridge on behalf of which the packets are sent.

It should be noted that FORWARD frames are also (and typically) used to
forward data plane packets on DSA links in cross-chip topologies. The
FORWARD frame header contains the source port and switch ID, and
switches receiving this frame header forward the packet according to
their cross-chip port-based VLAN table (PVT).

To address the bridging domain isolation in the context of offloading
the forwarding on TX, the idea is that we can reuse the parts of the PVT
that don't have any physical switch mapped to them, one entry for each
software bridge. The switches will therefore think that behind their
upstream port lie many switches, all in fact backed up by software
bridges through tag_dsa.c, which constructs FORWARD packets with the
right switch ID corresponding to each bridge.

The mapping we use is absolutely trivial: DSA gives us a unique bridge
number, and we add the number of the physical switches in the DSA switch
tree to that, to obtain a unique virtual bridge device number to use in
the PVT.
Co-developed-by: default avatarTobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: default avatarTobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ce5df689
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7