- 17 Mar, 2015 34 commits
-
-
Ville Syrjälä authored
VLV/CHV have similar DSPARB registers as older platforms, just more of them due to more planes. Add a bit of code to read out the current FIFO split from the registers. Will be useful later when we improve the WM calculations. v2: Add display_mmio_offset to DSPARB Reviewed-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
Now that we have drm_planes for the cursor and primary we can move the pixel_size handling into vlv_compute_drain_latency() and just pass the appropriate plane to it. v2: Check plane->state->fb instead of plane->fb Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v1) Signed-off-by:
-
Ville Syrjälä authored
Introduce struct vlv_wm_values to house VLV watermark/drain latency values. We start by using it when computing the drain latency values. Reviewed-by:
-
Ville Syrjälä authored
Move the DDL precision handling into vlv_compute_drain_latency() so the callers don't have to duplicate the same code to deal with it. Reviewed-by:
-
Ville Syrjälä authored
The current drain lantency computation relies on hardcoded limits to determine when the to use the low vs. high precision multiplier. Rewrite the code to use a more straightforward approach. Reviewed-by:
-
Ville Syrjälä authored
Kill the silly DRAIN_LATENCY_PRECISION_* defines and just use the raw number instead. v2: Move the sprite 32/16 -> 16/8 preision multiplier change to another patch (Jesse) Reviewed-by: -
Ville Syrjälä authored
Apparently we must yet halve the DDL drain latency from what we're using currently. This little nugget is not in any spec, but came down through the grapevine. This makes the displays a bit more stable. Not quite fully stable but at least they don't fall over immediately on driver load. v2: Update high_precision in valleyview_update_sprite_wm() too (Jesse) Reviewed-by:
-
Chris Wilson authored
If we have a single unclaimed register, we will have lots. A WARN for each one makes the machine unusable and does not aid debugging. Convert the i915.mmio_debug option to a counter for how many WARNs to fire before shutting up. Even when i915.mmio_debug was disabled it would continue to shout an *ERROR* for every interrupt, without any information at all for debugging. The massive verbiage was added in commit 5978118c Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Wed Jul 16 17:49:29 2014 -0300 drm/i915: reorganize the unclaimed register detection code v2: Automatically enable invalid mmio reporting for the *next* invalid access if mmio_debug is disabled by default. This should give us clearer debug information without polluting the logs too much. v3: Compile fixes, rebase. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Rodrigo Vivi <rodrigo.vivi@gmail.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> [danvet: Update modparam text per the thread.] Signed-off-by:
-
kbuild test robot authored
drivers/gpu/drm/i915/intel_ringbuffer.c:435:1-4: WARNING: end returns can be simpified Simplify a trivial if-return sequence. Possibly combine with a preceding function call. Generated by: scripts/coccinelle/misc/simple_return.cocci CC: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Mika Kuoppala authored
commit 05a2fb15 ("drm/i915: Consolidate forcewake code") failed to take into account that we have used to reset both the gen6 style and the multithreaded style forcewake registers. This is due to fact that ivb can use either, depending on how the bios has set up the machine. Mimic the old semantics before we have determined the correct variety and reset both before the ecobus probe. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Huang Ying <ying.huang@intel.com> Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by:
-
John Harrison authored
Apparently, this has never worked reliably and is currently disabled. Also, the gains are not particularly impressive. Thus rather than try to keep unused code from decaying and having to update it for other driver changes, it was decided to simply remove it. For: VIZ-5115 Signed-off-by:
John Harrison <John.C.Harrison@Intel.com> Signed-off-by:
-
Matt Roper authored
We need to disable all sprite planes when disabling the CRTC. We had been using the top-level atomic 'disable' entrypoint to accomplish this, which was wrong. Not only can this lead to various locking issues, it also modifies the actual plane state, making it impossible to restore the plane properly later. For example, a DPMS off followed by a DPMS on will result in any sprite planes in use not being restored properly. The proper solution here is to call directly into our 'commit plane' hook with a copy of the plane's current state that has 'visible' set to false. Committing this dummy state will turn off the plane, but will not touch the actual plane->state pointer, allowing us to properly restore the plane state later. Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Mika Kuoppala authored
If the requested size is less than what the full range of pdps can address, we end up setting pdps for only the requested area. The logical context however needs all pdp entries to be valid. Prior to commit 06fda602 ("drm/i915: Create page table allocators") we have been writing pdp entries with dma address of zero instead of valid pdps. This is supposedly bad even if those pdps are not addressed. As commit 06fda602 ("drm/i915: Create page table allocators") introduced more dynamic structure for pdps, we ended up oopsing when we populated the lrc context. Analyzing this oops revealed the fact that we have not been writing valid pdps with bsw, as it is doing the ppgtt init with 2GB limit in some cases. We should do the right thing and setup the non addressable part pdps/pde/pte to scratch page through the minimal structure by having just pdp with pde entries pointing to same page with pte entries pointing to scratch page. But instead of going through that trouble, setup all the pdps through individual pd pages and pt entries, even for non addressable parts. And let the clear range point them to scratch page. This way we populate the lrc with valid pdps and wait for dynamic page allocation work to land, and do the heavy lifting for truncating page table tree according to usage. The regression of oopsing in init was introduced by commit 06fda602 ("drm/i915: Create page table allocators") v2: Clear the range for the unused part also (Ville) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89350 Cc: Michel Thierry <michel.thierry@intel.com> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by:
Valtteri Rantala <valtteri.rantala@intel.com> Signed-off-by:
-
Sonika Jindal authored
v2: Making the link_clock half in switch inline with the DPLL_CTRL1_* macros (Ville) Signed-off-by:
Sonika Jindal <sonika.jindal@intel.com> Reviewed-by:
-
Sonika Jindal authored
eDp 1.4 supports custom frequencies. Skylake supports following intermediate frequencies : 3.24 GHz, 2.16 GHz and 4.32 GHz along with usual LBR, HBR and HBR2 frequencies. Read sink supported frequencies and get common frequencies from sink and source and use these for link training. v2: Rebased, removed calculation of min_clock since for edp it is taken as max_clock (as per comment). v3: Keeping single array for link rates (Satheesh) v4: Setting LINK_BW_SET to 0 when setting LINK_RATE_SET (Satheesh) v5: Some minor nits (Ville) v6: Keeping separate arrays for source and sink rates (Ville) v7: Remove redundant setting of DP_LINK_BW_SET to 0 (Ville) Reviewed-by:
-
Sonika Jindal authored
v2: Using DP_SUPPORTED_LINK_RATES macro for supported_rates array (Satheesh). v3: Reading dpcd's supported link rates tables based upon edp version in the same patch. v4: Move version check under is_edp (Satheesh) v5: Using le16 for rates, some naming, and removing nested if block (Ville) v6: Correctly using DP_MAX_SUPPORTED_RATES and removing DP_SUPPORTED_LINK_RATES (Ville) v7: Incorrectly removed DP_SUPPORTED_LINK_RATES in v6, re-adding it v8: Checking return value of intel_dp_dpcd_read_wake() (Ville) Reviewed-by:
-
Paulo Zanoni authored
Kill the blt/render tracking we currently have and use the frontbuffer tracking infrastructure. Don't enable things by default yet. v2: (Rodrigo) Fix small conflict on rebase and typo at subject. v3: (Paulo) Rebase on RENDER_CS change. v4: (Paulo) Rebase. v5: (Paulo) Simplify: flushes don't have origin (Daniel). Also rebase due to patch order changes. Signed-off-by:Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Ramalingam C authored
In invalidate and flush functions of eDP DRRS, if deferred downclock work starts execution at a time window between acquiring the drrs mutex and cancellation of the deferred work (intel_edp_drrs_downclock_work), then deferred work will find drrs mutex locked and wait for the same. Meanwhile the function that acquired mutex drrs invalidate/flush will wait for the completion of the deferred work before releasing the mutex. Thats a deadlock. To avoid such deadlock scenario, this change cancels the deferred work before acquiring the mutex at invalidate and flush functions. Signed-off-by:
Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
-
Vandana Kannan authored
Adding a debugfs entry to determine if DRRS is supported or not V2: [By Ram]: Following details about the active crtc will be filled in seq-file of the debugfs 1. Encoder output type 2. DRRS Support on this CRTC 3. DRRS current state 4. Current Vrefresh Format is as follows: CRTC 1: Output: eDP, DRRS Supported: Yes (Seamless), DRRS_State: DRRS_HIGH_RR, Vrefresh: 60 CRTC 2: Output: HDMI, DRRS Supported : No, VBT DRRS_type: Seamless CRTC 1: Output: eDP, DRRS Supported: Yes (Seamless), DRRS_State: DRRS_LOW_RR, Vrefresh: 40 CRTC 2: Output: HDMI, DRRS Supported : No, VBT DRRS_type: Seamless V3: [By Ram]: Readability is improved. Another error case is covered [Daniel] V4: [By Ram]: Current status of the Idleness DRRS along with the Front buffer bits are added to the debugfs. [Rodrigo] V5: [By Ram]: Rephrased to make it easy to understand. And format is modified. [Rodrigo] V6: [By Ram]: Modeset mutex are acquired for each crtc along with renaming the Idleness detection states [Daniel] Signed-off-by:
Vandana Kannan <vandana.kannan@intel.com> Signed-off-by:
-
Neil Roberts authored
Adds a parameter which can be used with DRM_I915_GETPARAM to query the GPU revision. The intention is to use this in Mesa to implement the WaDisableSIMD16On3SrcInstr workaround on Skylake but only for revision 2. Signed-off-by:
Neil Roberts <neil@linux.intel.com> Signed-off-by:
-
Ander Conselvan de Oliveira authored
When logging that full mode switch is necessary, log which connector, encoder or crtc has caused it, so it is easier to figure out what is goind on by just looking at the log. Signed-off-by:
Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by:
-
Ander Conselvan de Oliveira authored
We have similar macros for crtcs and encoders, and the pattern happens often enough to justify the macro. Signed-off-by:
-
Ander Conselvan de Oliveira authored
In the path were there is no state to duplicate, the allocated crtc state wouldn't have the crtc backpointer initialized. Signed-off-by:
-
Ville Syrjälä authored
The current minimum vco frequency leaves us with a gap in our supported frequencies at 233-243 MHz. Your typical 2560x1440@60 display wants a pixel clock of 241.5 MHz, which is just withing that gap. Reduce the allowed vco min frequency to 4.8GHz to reduce the gap to 233-240 MHz, and thus allow such displays to work. 4.8 GHz is actually the documented (at least in some docs) limit of the PLL, and we just picked 4.86 GHz originally because that was the lowest value produced by the PLL spreadsheet, which obviously didn't consider 2560x1440 displays. Signed-off-by:
Vijay Purushothaman <vijay.a.purushothaman@linux.intel.com> Signed-off-by:
-
Paulo Zanoni authored
We need this for FBC, and possibly for PSR too. v2: Don't only flush: invalidate too (Daniel). Signed-off-by:
-
Paulo Zanoni authored
We want to port FBC to the frontbuffer tracking infrastructure, but for that we need to know what caused the object invalidation so we can react accordingly: CPU mmaps need manual, GTT mmaps and flips don't need handling and ring rendering needs nukes. v2: - s/ORIGIN_RENDER/ORIGIN_CS/ (Daniel, Rodrigo) - Fix copy/pasted wrong documentation - Rebase v3: - Rebase v4: - Don't pass the operation to flushes (Daniel). Signed-off-by: -
Daniel Vetter authored
This reverts commit 3f678c96. We've been a bit too optimistic with this one here :( The trouble is that internally we're still using these plane update/disable hooks. Which was totally ok pre-atomic since the drm core did all the book-keeping updating and these just mostly updated hw state. But with atomic there's lots more going on, and it causes heaps of trouble with the load detect code. This one specifically cause a deadlock since both the load detect code and the nested plane atomic helper functions tried to grab the same locks. It only blows up because of the evil tricks though we play with the implicit ww acquire context. Applying this revert unearths the NULL deref on already freed framebuffer objects reported as a regression in 4.0 by various people. Fixing this will be fairly invasive, hence revert even for the 4.1-next queue. Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Bolle <pebolle@tiscali.nl> Acked-by:
Daniel Vetter <daniel.vetter@intel.com>
-
Damien Lespiau authored
This translation entry was updated after electrical validation by the hw team. The other entries are removed from existence as they aren't validated and because the sole use of a certain type of level shifter for SKL products is anticipated. v2: Remove all the other entries and force the use of the 800mv+2dB config (Sonika) Suggested-by:Damien Lespiau <damien.lespiau@intel.com> Reviewed-by:
-
Damien Lespiau authored
Implicit usage of local variables in macros isn't exactly the greatest thing in the world, especially when that variable is the drm device and we want to move towards a broader use of the i915 device structure. Let's make for_each_sprite() take dev_priv as its first argument then. Suggested-by:
-
Damien Lespiau authored
Implicit usage of local variables in macros isn't exactly the greatest thing in the world, especially when that variable is the drm device and we want to move towards a broader use of the i915 device structure. Let's make for_each_plane() take dev_priv as its first argument then. Suggested-by:
-
Daniel Vetter authored
With the two-step reset counter increments which braket the actual reset code and the subsequent wake-up we're guaranteeing that all the lockless waiters _will_ be woken up. And since we unconditionally bail out of waits with -EAGAIN (or -EIO) in that case there is not risk of lost interrupt enabling bits when the lockless wait code races against a gpu reset. Let's remove this FIXME as resolved then. Signed-off-by:
-
Yannick Guerrini authored
Change 'mutliple' to 'multiple' Change 'mutlipler' to 'multiplier' Change 'Haswel' to 'Haswell' Signed-off-by:
Yannick Guerrini <yguerrini@tomshardware.fr> Signed-off-by:
-
Matt Roper authored
plane->fb is a legacy pointer that not always be up-to-date (or updated early enough). Make sure the watermark code uses plane->state->fb so that we're always doing our calculations based on the correct framebuffers. This patch was generated by Coccinelle with the following semantic patch: @@ struct drm_plane *P; @@ - P->fb + P->state->fb v2: Rebase Signed-off-by: -
Matt Roper authored
The cursor size fields in intel_crtc just duplicate the data from cursor->state.crtc_{w,h} so we don't need them any more. Worse, their use in the watermark code actually introduces a subtle bug since they don't get updated to mirror the state values until the plane commit stage, which is *after* we've already used them to calculate new watermark values. This happens because we had to move watermark updates slightly earlier (outside vblank evasion) in commit commit 32b7eeec Author: Matt Roper <matthew.d.roper@intel.com> Date: Wed Dec 24 07:59:06 2014 -0800 drm/i915: Refactor work that can sleep out of commit (v7) Dropping the intel_crtc fields and just using the state values (which are properly updated by the time watermark updates happen) should solve the problem. Aside from the actual removal of the struct fields (which are formatted in a way that I couldn't figure out how to match in Coccinelle), the rest of this patch was generated via the following semantic patch: // Drop assignment @@ struct intel_crtc *C; struct drm_plane_state S; @@ ( - C->cursor_width = S.crtc_w; | - C->cursor_height = S.crtc_h; ) // Replace usage @@ struct intel_crtc *C; expression E; @@ ( - C->cursor_width + C->base.cursor->state->crtc_w | - C->cursor_height + C->base.cursor->state->crtc_h | - to_intel_crtc(E)->cursor_width + E->cursor->state->crtc_w | - to_intel_crtc(E)->cursor_height + E->cursor->state->crtc_h ) v2: Rebase Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Joe Konno <joe.konno@linux.intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89346Signed-off-by:
-
- 11 Mar, 2015 1 commit
-
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
Another pile of misc drm patches all over, mostly polish for atomic. Last minute rebase was to avoid the broken merge. * tag 'topic/drm-misc-2015-03-10' of git://anongit.freedesktop.org/drm-intel: drm: Check in setcrtc if the primary plane supports the fb pixel format drm: Lighten sysfs connector 'status' drm/plane-helper: unexport drm_primary_helper_create_plane drm: Share plane pixel format check code between legacy and atomic drm: Fix trivial typos in comments drm/dp: add DPCD definitions from eDP 1.4 drm/dp: add DPCD definitions from DP 1.1 and 1.2a drm: Fixup racy refcounting in plane_force_disable drm/i915: Rotation property is now handled in DRM core drm: Complete moving rotation property to core drm/dp: add DPCD definitions from eDP 1.2 drm/dp: indentation and ordering cleanups drm/atomic-helper: Fix kerneldoc for prepare_planes drm: Remove redundant code in the getencoder ioctl
-
- 10 Mar, 2015 5 commits
-
-
Laurent Pinchart authored
Drivers implementing the universal planes API report the list of supported pixel formats for the primary plane. Make sure the fb passed to the setcrtc ioctl is compatible. Drivers not implementing the universal planes API will have no format reported for the primary plane, skip the check in that case. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Chris Wilson authored
Since the beginning, sysfs/connector/status has done a heavyweight detection of the current connector status. But no user, such as upowerd or logind, has ever desired to initiate a probe. Move the probing into a new attribute so that existing readers get the behaviour they desire. v2: David Herrmann suggested using "echo detect > /sys/.../status" to trigger the probing, which is a fine idea. This extends that to also allow the user to apply the force detection overrides at runtime. v3: Now with airlied's email address fixed! Requires sysfs_streq() Signed-off-by:
David Herrmann <dh.herrmann@gmail.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Daniel Vetter authored
We shouldn't tempt driver writers into using this since it uses a default format list which is likely wrong. And when that's done we can simplify the code a bit, too. Noticed while reviewing a patch from Laurent. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
-
Laurent Pinchart authored
Both the legacy and atomic helpers need to check whether a plane supports a given pixel format. The code is currently duplicated, share it. Signed-off-by:
-
Yannick Guerrini authored
Change 'pixes' to 'pixels' Change 'enabel' to 'enable' Change 'enabeling' to 'enabling' Signed-off-by:
-
