- 23 Jul, 2020 14 commits
-
-
Horia Geantă authored
RNGB block is found in some i.MX6 SoCs - 6SL, 6SLL, 6ULL, 6ULZ. Add corresponding compatible strings. Note: Several NXP SoC from QorIQ family (P1010, P1023, P4080, P3041, P5020) also have a RNGB, however it's part of the CAAM (Cryptograhic Accelerator and Assurance Module) crypto accelerator. In this case, RNGB is managed in the caam driver (drivers/crypto/caam/), since it's tightly related to the caam "job ring" interface, not to mention CAAM internally relying on RNGB as source of randomness. On the other hand, the i.MX6 SoCs with RNGB have a DCP (Data Co-Processor) crypto accelerator and this block and RNGB are independent. Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Daniel Jordan authored
Only its reorder field is actually used now, so remove the struct and embed @reorder directly in parallel_data. No functional change, just a cleanup. Signed-off-by:
Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Daniel Jordan authored
There's no reason to have two interfaces when there's only one caller. Removing _possible saves text and simplifies future changes. Signed-off-by:
-
Daniel Jordan authored
A padata instance has effective cpumasks that store the user-supplied masks ANDed with the online mask, but this middleman is unnecessary. parallel_data keeps the same information around. Removing this saves text and code churn in future changes. Signed-off-by:
-
Daniel Jordan authored
pd_setup_cpumasks() has only one caller. Move its contents inline to prepare for the next cleanup. Signed-off-by:
-
Daniel Jordan authored
padata_stop() has two callers and is unnecessary in both cases. When pcrypt calls it before padata_free(), it's being unloaded so there are no outstanding padata jobs[0]. When __padata_free() calls it, it's either along the same path or else pcrypt initialization failed, which of course means there are also no outstanding jobs. Removing it simplifies padata and saves text. [0] https://lore.kernel.org/linux-crypto/20191119225017.mjrak2fwa5vccazl@gondor.apana.org.au/Signed-off-by:
-
Daniel Jordan authored
padata_start() is only used right after pcrypt allocates an instance with all possible CPUs, when PADATA_INVALID can't happen, so there's no need for a separate "start" step. It can be done during allocation to save text, make using padata easier, and avoid unneeded calls in the future. Signed-off-by:
-
Tom Rix authored
clang static analysis flags this error qat_uclo.c:297:3: warning: Attempt to free released memory [unix.Malloc] kfree(*init_tab_base); ^~~~~~~~~~~~~~~~~~~~~ When input *init_tab_base is null, the function allocates memory for the head of the list. When there is problem allocating other list elements the list is unwound and freed. Then a check is made if the list head was allocated and is also freed. Keeping track of the what may need to be freed is the variable 'tail_old'. The unwinding/freeing block is while (tail_old) { mem_init = tail_old->next; kfree(tail_old); tail_old = mem_init; } The problem is that the first element of tail_old is also what was allocated for the list head init_header = kzalloc(sizeof(*init_header), GFP_KERNEL); ... *init_tab_base = init_header; flag = 1; } tail_old = init_header; So *init_tab_base/init_header are freed twice. There is another problem. When the input *init_tab_base is non null the tail_old is calculated by traveling down the list to first non null entry. tail_old = init_header; while (tail_old->next) tail_old = tail_old->next; When the unwinding free happens, the last entry of the input list will be freed. So the freeing needs a general changed. If locally allocated the first element of tail_old is freed, else it is skipped. As a bit of cleanup, reset *init_tab_base if it came in as null. Fixes: b4b7e67c ("crypto: qat - Intel(R) QAT ucode part of fw loader") Cc: <stable@vger.kernel.org> Signed-off-by:Tom Rix <trix@redhat.com> Signed-off-by:
-
Tero Kristo authored
The child devices for sa2ul (like the RNG) have hard dependency towards the parent, they can't function without the parent enabled. Add device link for this purpose so that the dependencies are taken care of properly. Signed-off-by:
Tero Kristo <t-kristo@ti.com> Signed-off-by:
-
Keerthy authored
Add support for sa2ul hardware AEAD for hmac(sha256),cbc(aes) and hmac(sha1),cbc(aes) algorithms. Signed-off-by:
Keerthy <j-keerthy@ti.com> [t-kristo@ti.com: number of bug fixes, major refactoring and cleanup of code] Signed-off-by:
-
Keerthy authored
Add support for sha1/sha256/sha512 sa2ul based hardware authentication. With the hash update mechanism, we always use software fallback mechanism for now, as there is no way to fetch the partial hash state from the HW accelerator. HW accelerator is only used when digest is called for a data chunk of known size. Signed-off-by:
-
Keerthy authored
Adds a basic crypto driver and currently supports AES/3DES in cbc mode for both encryption and decryption. Signed-off-by:
-
Keerthy authored
The Security Accelerator Ultra Lite (SA2UL) subsystem provides hardware cryptographic acceleration for the following use cases: * Encryption and authentication for secure boot * Encryption and authentication of content in applications requiring DRM (digital rights management) and content/asset protection SA2UL provides support for number of different cryptographic algorithms including SHA1, SHA256, SHA512, AES, 3DES, and various combinations of the previous for AEAD use. Reviewed-by:
-
Arnd Bergmann authored
The clang integrated assembler complains about movzxw: arch/x86/crypto/crc32c-pcl-intel-asm_64.S:173:2: error: invalid instruction mnemonic 'movzxw' It seems that movzwq is the mnemonic that it expects instead, and this is what objdump prints when disassembling the file. Fixes: 6a8ce1ef ("crypto: crc32c - Optimize CRC32C calculation with PCLMULQDQ instruction") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
- 16 Jul, 2020 26 commits
-
-
Christophe JAILLET authored
At the top this file, we have: #define pr_fmt(fmt) "chcr:" fmt So there is no need to repeat "chcr : " in some error message when the pr_xxx macro is used. This would lead to log "chcr:chcr : blabla" Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Christophe JAILLET authored
The error handling path of 'chcr_authenc_setkey()' is the same as this error handling code. So just 'goto out' as done everywhere in the function to simplify the code. Signed-off-by:
-
Eric Biggers authored
Overly-generic names can cause problems like naming collisions, confusing crash reports, and reduced grep-ability. E.g. see commit d099ea6e ("crypto - Avoid free() namespace collision"). Clean this up for the lrw template by prefixing the names with "lrw_". (I didn't use "crypto_lrw_" instead because that seems overkill.) Also constify the tfm context in a couple places. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Eric Biggers authored
Overly-generic names can cause problems like naming collisions, confusing crash reports, and reduced grep-ability. E.g. see commit d099ea6e ("crypto - Avoid free() namespace collision"). Clean this up for the xts template by prefixing the names with "xts_". (I didn't use "crypto_xts_" instead because that seems overkill.) Also constify the tfm context in a couple places, and make xts_free_instance() use the instance context structure so that it doesn't just assume the crypto_skcipher_spawn is at the beginning. Signed-off-by:
-
Hui Tang authored
for Hi1620 hardware, we should disable these hardware flr: 1. BME_FLR - bit 7, 2. PM_FLR - bit 11, 3. SRIOV_FLR - bit 12, Or HPRE may goto D3 state, when we bind and unbind HPRE quickly, as it does FLR triggered by BME/PM/SRIOV. Fixes: c8b4b477("crypto: hisilicon - add HiSilicon HPRE accelerator") Signed-off-by:
Hui Tang <tanghui20@huawei.com> Signed-off-by:
Meng Yu <yumeng18@huawei.com> Reviewed-by:
Zaibo Xu <xuzaibo@huawei.com> Signed-off-by:
-
Meng Yu authored
Update debugfs interface parameters, and adjust the processing logic inside the corresponding function. Fixes: 84897415("crypto: hisilicon - Add debugfs for HPRE") Signed-off-by:
-
Meng Yu authored
If CONFIG_PCI_IOV is not enabled, we can not use "sriov_configure". Fixes: 5ec302a3("crypto: hisilicon - add SRIOV support for HPRE") Signed-off-by:
Shukun Tan <tanshukun1@huawei.com> Signed-off-by:
-
Meng Yu authored
1. Bit 1 to bit 5 are NFE, not CE. 2. Macro 'HPRE_VF_NUM' is defined in 'qm.h', so delete it here. 3. Delete multiple blank lines. 4. Adjust format alignment. Signed-off-by:
Longfang Liu <liulongfang@huawei.com> Signed-off-by:
-
Hui Tang authored
Registers in "hpre_dfx_files" can only be cleaned to zero but HPRE_OVERTIME_THRHLD, which can be written as any number. Fixes: 64a6301e("crypto: hisilicon/hpre - add debugfs for ...") Signed-off-by:
Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by:
-
Meng Yu authored
Initialize current queue number as HPRE_PF_DEF_Q_NUM, or it is zero and we can't set its value by "current_q_write". Signed-off-by:
-
Mikulas Patocka authored
Set the flag CRYPTO_ALG_ALLOCATES_MEMORY in the crypto drivers that allocate memory. drivers/crypto/allwinner/sun8i-ce/sun8i-ce-core.c: sun8i_ce_cipher drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c: sun8i_ss_cipher drivers/crypto/amlogic/amlogic-gxl-core.c: meson_cipher drivers/crypto/axis/artpec6_crypto.c: artpec6_crypto_common_init drivers/crypto/bcm/cipher.c: spu_skcipher_rx_sg_create drivers/crypto/caam/caamalg.c: aead_edesc_alloc drivers/crypto/caam/caamalg_qi.c: aead_edesc_alloc drivers/crypto/caam/caamalg_qi2.c: aead_edesc_alloc drivers/crypto/caam/caamhash.c: hash_digest_key drivers/crypto/cavium/cpt/cptvf_algs.c: process_request drivers/crypto/cavium/nitrox/nitrox_aead.c: nitrox_process_se_request drivers/crypto/cavium/nitrox/nitrox_skcipher.c: nitrox_process_se_request drivers/crypto/ccp/ccp-crypto-aes-cmac.c: ccp_do_cmac_update drivers/crypto/ccp/ccp-crypto-aes-galois.c: ccp_crypto_enqueue_request drivers/crypto/ccp/ccp-crypto-aes-xts.c: ccp_crypto_enqueue_request drivers/crypto/ccp/ccp-crypto-aes.c: ccp_crypto_enqueue_request drivers/crypto/ccp/ccp-crypto-des3.c: ccp_crypto_enqueue_request drivers/crypto/ccp/ccp-crypto-sha.c: ccp_crypto_enqueue_request drivers/crypto/chelsio/chcr_algo.c: create_cipher_wr drivers/crypto/hisilicon/sec/sec_algs.c: sec_alloc_and_fill_hw_sgl drivers/crypto/hisilicon/sec2/sec_crypto.c: sec_alloc_req_id drivers/crypto/inside-secure/safexcel_cipher.c: safexcel_queue_req drivers/crypto/inside-secure/safexcel_hash.c: safexcel_ahash_enqueue drivers/crypto/ixp4xx_crypto.c: ablk_perform drivers/crypto/marvell/cesa/cipher.c: mv_cesa_skcipher_dma_req_init drivers/crypto/marvell/cesa/hash.c: mv_cesa_ahash_dma_req_init drivers/crypto/marvell/octeontx/otx_cptvf_algs.c: create_ctx_hdr drivers/crypto/n2_core.c: n2_compute_chunks drivers/crypto/picoxcell_crypto.c: spacc_sg_to_ddt drivers/crypto/qat/qat_common/qat_algs.c: qat_alg_skcipher_encrypt drivers/crypto/qce/skcipher.c: qce_skcipher_async_req_handle drivers/crypto/talitos.c : talitos_edesc_alloc drivers/crypto/virtio/virtio_crypto_algs.c: __virtio_crypto_skcipher_do_req drivers/crypto/xilinx/zynqmp-aes-gcm.c: zynqmp_aes_aead_cipher Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> [EB: avoid overly-long lines] Signed-off-by:
-
Eric Biggers authored
Introduce a new algorithm flag CRYPTO_ALG_ALLOCATES_MEMORY. If this flag is set, then the driver allocates memory in its request routine. Such drivers are not suitable for disk encryption because GFP_ATOMIC allocation can fail anytime (causing random I/O errors) and GFP_KERNEL allocation can recurse into the block layer, causing a deadlock. For now, this flag is only implemented for some algorithm types. We also assume some usage constraints for it to be meaningful, since there are lots of edge cases the crypto API allows (e.g., misaligned or fragmented scatterlists) that mean that nearly any crypto algorithm can allocate memory in some case. See the comment for details. Also add this flag to CRYPTO_ALG_INHERITED_FLAGS so that when a template is instantiated, this flag is set on the template instance if it is set on any algorithm the instance uses. Based on a patch by Mikulas Patocka <mpatocka@redhat.com> (https://lore.kernel.org/r/alpine.LRH.2.02.2006301414580.30526@file01.intranet.prod.int.rdu2.redhat.com). Signed-off-by:
-
Eric Biggers authored
CRYPTO_ALG_NEED_FALLBACK is handled inconsistently. When it's requested to be clear, some templates propagate that request to child algorithms, while others don't. It's apparently desired for NEED_FALLBACK to be propagated, to avoid deadlocks where a module tries to load itself while it's being initialized, and to avoid unnecessarily complex fallback chains where we have e.g. cbc-aes-$driver falling back to cbc(aes-$driver) where aes-$driver itself falls back to aes-generic, instead of cbc-aes-$driver simply falling back to cbc(aes-generic). There have been a number of fixes to this effect: commit 89027579 ("crypto: xts - Propagate NEED_FALLBACK bit") commit d2c2a85c ("crypto: ctr - Propagate NEED_FALLBACK bit") commit e6c2e65c ("crypto: cbc - Propagate NEED_FALLBACK bit") But it seems that other templates can have the same problems too. To avoid this whack-a-mole, just add NEED_FALLBACK to INHERITED_FLAGS so that it's always inherited. Signed-off-by:
-
Eric Biggers authored
The flag CRYPTO_ALG_ASYNC is "inherited" in the sense that when a template is instantiated, the template will have CRYPTO_ALG_ASYNC set if any of the algorithms it uses has CRYPTO_ALG_ASYNC set. We'd like to add a second flag (CRYPTO_ALG_ALLOCATES_MEMORY) that gets "inherited" in the same way. This is difficult because the handling of CRYPTO_ALG_ASYNC is hardcoded everywhere. Address this by: - Add CRYPTO_ALG_INHERITED_FLAGS, which contains the set of flags that have these inheritance semantics. - Add crypto_algt_inherited_mask(), for use by template ->create() methods. It returns any of these flags that the user asked to be unset and thus must be passed in the 'mask' to crypto_grab_*(). - Also modify crypto_check_attr_type() to handle computing the 'mask' so that most templates can just use this. - Make crypto_grab_*() propagate these flags to the template instance being created so that templates don't have to do this themselves. Make crypto/simd.c propagate these flags too, since it "wraps" another algorithm, similar to a template. Based on a patch by Mikulas Patocka <mpatocka@redhat.com> (https://lore.kernel.org/r/alpine.LRH.2.02.2006301414580.30526@file01.intranet.prod.int.rdu2.redhat.com). Signed-off-by: -
Eric Biggers authored
seqiv_create() is pointless because it just checks that the template is being instantiated as an AEAD, then calls seqiv_aead_create(). But seqiv_aead_create() does the exact same check, via aead_geniv_alloc(). Just remove seqiv_create() and use seqiv_aead_create() directly. Signed-off-by:
-
Eric Biggers authored
The type and mask arguments to aead_geniv_alloc() are always 0, so remove them. Signed-off-by:
-
Uros Bizjak authored
Current minimum required version of binutils is 2.23, which supports PSHUFB, PCLMULQDQ, PEXTRD, AESKEYGENASSIST, AESIMC, AESENC, AESENCLAST, AESDEC, AESDECLAST and MOVQ instruction mnemonics. Substitute macros from include/asm/inst.h with a proper instruction mnemonics in various assmbly files from x86/crypto directory, and remove now unneeded file. The patch was tested by calculating and comparing sha256sum hashes of stripped object files before and after the patch, to be sure that executable code didn't change. Signed-off-by:
Uros Bizjak <ubizjak@gmail.com> CC: Herbert Xu <herbert@gondor.apana.org.au> CC: "David S. Miller" <davem@davemloft.net> CC: Thomas Gleixner <tglx@linutronix.de> CC: Ingo Molnar <mingo@redhat.com> CC: Borislav Petkov <bp@alien8.de> CC: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
-
Herbert Xu authored
This patch kills an strncpy by using strscpy instead. The name would be silently truncated if it is too long. Signed-off-by:
John Allen <john.allen@amd.com> Signed-off-by:
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by:Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by:
-
Eric Biggers authored
Now that there's a function that calculates the SHA-256 digest of a buffer in one step, use it instead of sha256_init() + sha256_update() + sha256_final(). Also simplify the code by inlining calculate_sha256() into its caller and switching a debug log statement to use %*phN instead of bin2hex(). Acked-by:
Tzung-Bi Shih <tzungbi@google.com> Reviewed-by:
Ard Biesheuvel <ardb@kernel.org> Cc: alsa-devel@alsa-project.org Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Cheng-Yi Chiang <cychiang@chromium.org> Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com> Cc: Guenter Roeck <groeck@chromium.org> Cc: Tzung-Bi Shih <tzungbi@google.com> Signed-off-by:
-
Eric Biggers authored
Now that there's a function that calculates the SHA-256 digest of a buffer in one step, use it instead of sha256_init() + sha256_update() + sha256_final(). Reviewed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Cc: mptcp@lists.01.org Cc: Mat Martineau <mathew.j.martineau@linux.intel.com> Cc: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
-
Eric Biggers authored
Now that there's a function that calculates the SHA-256 digest of a buffer in one step, use it instead of sha256_init() + sha256_update() + sha256_final(). Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Cc: linux-efi@vger.kernel.org Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Eric Biggers authored
Add a function sha256() which computes a SHA-256 digest in one step, combining sha256_init() + sha256_update() + sha256_final(). This is similar to how we also have blake2s(). Reviewed-by:
-
Eric Biggers authored
To avoid a naming collision when we add a sha256() library function, rename the "sha256" static variable in sha256_glue.c to "sha256_alg". For consistency, also rename "sha224" to "sha224_alg". Reported-by:
kernel test robot <lkp@intel.com> Cc: sparclinux@vger.kernel.org Signed-off-by:
-
Ard Biesheuvel authored
Due to the fact that the x86 port does not support allocating objects on the stack with an alignment that exceeds 8 bytes, we have a rather ugly hack in the x86 code for ChaCha to ensure that the state array is aligned to 16 bytes, allowing the SSE3 implementation of the algorithm to use aligned loads. Given that the performance benefit of using of aligned loads appears to be limited (~0.25% for 1k blocks using tcrypt on a Corei7-8650U), and the fact that this hack has leaked into generic ChaCha code, let's just remove it. Cc: Martin Willi <martin@strongswan.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Eric Biggers <ebiggers@kernel.org> Signed-off-by:
Martin Willi <martin@strongswan.org> Reviewed-by:
-
Herbert Xu authored
This patch adds a declaration for chacha20poly1305_selftest to silence a sparse warning. Signed-off-by:
-
