- 15 Jun, 2019 40 commits
-
-
Greg Kroah-Hartman authored
This reverts commit 07e38998 which is commit d5bb334a upstream. Lots of people have reported issues with this patch, and as there does not seem to be a fix going into Linus's kernel tree any time soon, revert the commit in the stable trees so as to get people's machines working properly again. Reported-by:
Vasily Khoruzhick <anarsoul@gmail.com> Reported-by:
Hans de Goede <hdegoede@redhat.com> Cc: Jeremy Cline <jeremy@jcline.org> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dennis Zhou authored
[ Upstream commit 8c43004a ] pcpu_find_block_fit() guarantees that a fit is found within PCPU_BITMAP_BLOCK_BITS. Iteration is used to determine the first fit as it compares against the block's contig_hint. This can lead to incorrectly scanning past the end of the bitmap. The behavior was okay given the check after for bit_off >= end and the correctness of the hints from pcpu_find_block_fit(). This patch fixes this by bounding the end offset by the number of bits in a chunk. Signed-off-by:
Dennis Zhou <dennis@kernel.org> Reviewed-by:
Peng Fan <peng.fan@nxp.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Andrey Smirnov authored
[ Upstream commit 338aa107 ] Fix the warning produced by gpiochip_set_irq_hooks() by allocating a dedicated IRQ chip per GPIO chip/port. Signed-off-by:
Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: linux-gpio@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-imx@nxp.com Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
-
Marek Vasut authored
[ Upstream commit d5aa8408 ] Porter needs the regulator quirk, just like the other boards. But unlike the other boards, the Porter uses DA9063L, which is at 0x5a. Otherwise, DA9063L and DA9210 IRQ line is still connected to CPU IRQ2 . Signed-off-by:
Marek Vasut <marek.vasut+renesas@gmail.com> Acked-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Takeshi Kihara authored
[ Upstream commit 15160f6d ] The Product Register of R-Car M3-W ES1.3 incorrectly identifies the SoC revision as ES2.1. Add a workaround to fix this. Signed-off-by:
Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 32a155b1 ] The datasheet says the vconn MUST be off when we start toggling. The tcpm.c state-machine is responsible to make sure vconn is off, but lets add a WARN to catch any cases where vconn is not off for some reason. Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Marek Szyprowski authored
[ Upstream commit 4d8e3e95 ] During early system resume on Exynos5422 with performance counters enabled the following kernel oops happens: Internal error: Oops - undefined instruction: 0 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 1433 Comm: bash Tainted: G W 5.0.0-rc5-next-20190208-00023-gd5fb5a8a13e6-dirty #5480 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) ... Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 4451006a DAC: 00000051 Process bash (pid: 1433, stack limit = 0xb7e0e22f) ... (reset_ctrl_regs) from [<c0112ad0>] (dbg_cpu_pm_notify+0x1c/0x24) (dbg_cpu_pm_notify) from [<c014c840>] (notifier_call_chain+0x44/0x84) (notifier_call_chain) from [<c014cbc0>] (__atomic_notifier_call_chain+0x7c/0x128) (__atomic_notifier_call_chain) from [<c01ffaac>] (cpu_pm_notify+0x30/0x54) (cpu_pm_notify) from [<c055116c>] (syscore_resume+0x98/0x3f4) (syscore_resume) from [<c0189350>] (suspend_devices_and_enter+0x97c/0xe74) (suspend_devices_and_enter) from [<c0189fb8>] (pm_suspend+0x770/0xc04) (pm_suspend) from [<c0187740>] (state_store+0x6c/0xcc) (state_store) from [<c09fa698>] (kobj_attr_store+0x14/0x20) (kobj_attr_store) from [<c030159c>] (sysfs_kf_write+0x4c/0x50) (sysfs_kf_write) from [<c0300620>] (kernfs_fop_write+0xfc/0x1e0) (kernfs_fop_write) from [<c0282be8>] (__vfs_write+0x2c/0x160) (__vfs_write) from [<c0282ea4>] (vfs_write+0xa4/0x16c) (vfs_write) from [<c0283080>] (ksys_write+0x40/0x8c) (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28) Undefined instruction is triggered during CP14 reset, because bits: #16 (Secure privileged invasive debug disabled) and #17 (Secure privileged noninvasive debug disable) are set in DSCR. Those bits depend on SPNIDEN and SPIDEN lines, which are provided by Secure JTAG hardware block. That block in turn is powered from cluster 0 (big/Eagle), but the Exynos5422 boots on cluster 1 (LITTLE/KFC). To fix this issue it is enough to turn on the power on the cluster 0 for a while. This lets the Secure JTAG block to propagate the needed signals to LITTLE/KFC cores and change their DSCR. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Phong Hoang authored
[ Upstream commit 347ab948 ] This patch fixes deadlock warning if removing PWM device when CONFIG_PROVE_LOCKING is enabled. This issue can be reproceduced by the following steps on the R-Car H3 Salvator-X board if the backlight is disabled: # cd /sys/class/pwm/pwmchip0 # echo 0 > export # ls device export npwm power pwm0 subsystem uevent unexport # cd device/driver # ls bind e6e31000.pwm uevent unbind # echo e6e31000.pwm > unbind [ 87.659974] ====================================================== [ 87.666149] WARNING: possible circular locking dependency detected [ 87.672327] 5.0.0 #7 Not tainted [ 87.675549] ------------------------------------------------------ [ 87.681723] bash/2986 is trying to acquire lock: [ 87.686337] 000000005ea0e178 (kn->count#58){++++}, at: kernfs_remove_by_name_ns+0x50/0xa0 [ 87.694528] [ 87.694528] but task is already holding lock: [ 87.700353] 000000006313b17c (pwm_lock){+.+.}, at: pwmchip_remove+0x28/0x13c [ 87.707405] [ 87.707405] which lock already depends on the new lock. [ 87.707405] [ 87.715574] [ 87.715574] the existing dependency chain (in reverse order) is: [ 87.723048] [ 87.723048] -> #1 (pwm_lock){+.+.}: [ 87.728017] __mutex_lock+0x70/0x7e4 [ 87.732108] mutex_lock_nested+0x1c/0x24 [ 87.736547] pwm_request_from_chip.part.6+0x34/0x74 [ 87.741940] pwm_request_from_chip+0x20/0x40 [ 87.746725] export_store+0x6c/0x1f4 [ 87.750820] dev_attr_store+0x18/0x28 [ 87.754998] sysfs_kf_write+0x54/0x64 [ 87.759175] kernfs_fop_write+0xe4/0x1e8 [ 87.763615] __vfs_write+0x40/0x184 [ 87.767619] vfs_write+0xa8/0x19c [ 87.771448] ksys_write+0x58/0xbc [ 87.775278] __arm64_sys_write+0x18/0x20 [ 87.779721] el0_svc_common+0xd0/0x124 [ 87.783986] el0_svc_compat_handler+0x1c/0x24 [ 87.788858] el0_svc_compat+0x8/0x18 [ 87.792947] [ 87.792947] -> #0 (kn->count#58){++++}: [ 87.798260] lock_acquire+0xc4/0x22c [ 87.802353] __kernfs_remove+0x258/0x2c4 [ 87.806790] kernfs_remove_by_name_ns+0x50/0xa0 [ 87.811836] remove_files.isra.1+0x38/0x78 [ 87.816447] sysfs_remove_group+0x48/0x98 [ 87.820971] sysfs_remove_groups+0x34/0x4c [ 87.825583] device_remove_attrs+0x6c/0x7c [ 87.830197] device_del+0x11c/0x33c [ 87.834201] device_unregister+0x14/0x2c [ 87.838638] pwmchip_sysfs_unexport+0x40/0x4c [ 87.843509] pwmchip_remove+0xf4/0x13c [ 87.847773] rcar_pwm_remove+0x28/0x34 [ 87.852039] platform_drv_remove+0x24/0x64 [ 87.856651] device_release_driver_internal+0x18c/0x21c [ 87.862391] device_release_driver+0x14/0x1c [ 87.867175] unbind_store+0xe0/0x124 [ 87.871265] drv_attr_store+0x20/0x30 [ 87.875442] sysfs_kf_write+0x54/0x64 [ 87.879618] kernfs_fop_write+0xe4/0x1e8 [ 87.884055] __vfs_write+0x40/0x184 [ 87.888057] vfs_write+0xa8/0x19c [ 87.891887] ksys_write+0x58/0xbc [ 87.895716] __arm64_sys_write+0x18/0x20 [ 87.900154] el0_svc_common+0xd0/0x124 [ 87.904417] el0_svc_compat_handler+0x1c/0x24 [ 87.909289] el0_svc_compat+0x8/0x18 [ 87.913378] [ 87.913378] other info that might help us debug this: [ 87.913378] [ 87.921374] Possible unsafe locking scenario: [ 87.921374] [ 87.927286] CPU0 CPU1 [ 87.931808] ---- ---- [ 87.936331] lock(pwm_lock); [ 87.939293] lock(kn->count#58); [ 87.945120] lock(pwm_lock); [ 87.950599] lock(kn->count#58); [ 87.953908] [ 87.953908] *** DEADLOCK *** [ 87.953908] [ 87.959821] 4 locks held by bash/2986: [ 87.963563] #0: 00000000ace7bc30 (sb_writers#6){.+.+}, at: vfs_write+0x188/0x19c [ 87.971044] #1: 00000000287991b2 (&of->mutex){+.+.}, at: kernfs_fop_write+0xb4/0x1e8 [ 87.978872] #2: 00000000f739d016 (&dev->mutex){....}, at: device_release_driver_internal+0x40/0x21c [ 87.988001] #3: 000000006313b17c (pwm_lock){+.+.}, at: pwmchip_remove+0x28/0x13c [ 87.995481] [ 87.995481] stack backtrace: [ 87.999836] CPU: 0 PID: 2986 Comm: bash Not tainted 5.0.0 #7 [ 88.005489] Hardware name: Renesas Salvator-X board based on r8a7795 ES1.x (DT) [ 88.012791] Call trace: [ 88.015235] dump_backtrace+0x0/0x190 [ 88.018891] show_stack+0x14/0x1c [ 88.022204] dump_stack+0xb0/0xec [ 88.025514] print_circular_bug.isra.32+0x1d0/0x2e0 [ 88.030385] __lock_acquire+0x1318/0x1864 [ 88.034388] lock_acquire+0xc4/0x22c [ 88.037958] __kernfs_remove+0x258/0x2c4 [ 88.041874] kernfs_remove_by_name_ns+0x50/0xa0 [ 88.046398] remove_files.isra.1+0x38/0x78 [ 88.050487] sysfs_remove_group+0x48/0x98 [ 88.054490] sysfs_remove_groups+0x34/0x4c [ 88.058580] device_remove_attrs+0x6c/0x7c [ 88.062671] device_del+0x11c/0x33c [ 88.066154] device_unregister+0x14/0x2c [ 88.070070] pwmchip_sysfs_unexport+0x40/0x4c [ 88.074421] pwmchip_remove+0xf4/0x13c [ 88.078163] rcar_pwm_remove+0x28/0x34 [ 88.081906] platform_drv_remove+0x24/0x64 [ 88.085996] device_release_driver_internal+0x18c/0x21c [ 88.091215] device_release_driver+0x14/0x1c [ 88.095478] unbind_store+0xe0/0x124 [ 88.099048] drv_attr_store+0x20/0x30 [ 88.102704] sysfs_kf_write+0x54/0x64 [ 88.106359] kernfs_fop_write+0xe4/0x1e8 [ 88.110275] __vfs_write+0x40/0x184 [ 88.113757] vfs_write+0xa8/0x19c [ 88.117065] ksys_write+0x58/0xbc [ 88.120374] __arm64_sys_write+0x18/0x20 [ 88.124291] el0_svc_common+0xd0/0x124 [ 88.128034] el0_svc_compat_handler+0x1c/0x24 [ 88.132384] el0_svc_compat+0x8/0x18 The sysfs unexport in pwmchip_remove() is completely asymmetric to what we do in pwmchip_add_with_polarity() and commit 0733424c ("pwm: Unexport children before chip removal") is a strong indication that this was wrong to begin with. We should just move pwmchip_sysfs_unexport() where it belongs, which is right after pwmchip_sysfs_unexport_children(). In that case, we do not need separate functions anymore either. We also really want to remove sysfs irrespective of whether or not the chip will be removed as a result of pwmchip_remove(). We can only assume that the driver will be gone after that, so we shouldn't leave any dangling sysfs files around. This warning disappears if we move pwmchip_sysfs_unexport() to the top of pwmchip_remove(), pwmchip_sysfs_unexport_children(). That way it is also outside of the pwm_lock section, which indeed doesn't seem to be needed. Moving the pwmchip_sysfs_export() call outside of that section also seems fine and it'd be perfectly symmetric with pwmchip_remove() again. So, this patch fixes them. Signed-off-by:
Phong Hoang <phong.hoang.wz@renesas.com> [shimoda: revise the commit log and code] Fixes: 76abbdde ("pwm: Add sysfs interface") Fixes: 0733424c ("pwm: Unexport children before chip removal") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by:
Hoan Nguyen An <na-hoan@jinso.co.jp> Reviewed-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
Krzysztof Kozlowski authored
[ Upstream commit 5ab99cf7 ] The PVDD_APIO_1V8 (LDO2) and PVDD_ABB_1V8 (LDO8) regulators were turned off by Linux kernel as unused. However they supply critical parts of SoC so they should be always on: 1. PVDD_APIO_1V8 supplies SYS pins (gpx[0-3], PSHOLD), HDMI level shift, RTC, VDD1_12 (DRAM internal 1.8 V logic), pull-up for PMIC interrupt lines, TTL/UARTR level shift, reset pins and SW-TACT1 button. It also supplies unused blocks like VDDQ_SRAM (for SROM controller) and VDDQ_GPIO (gpm7, gpy7). The LDO2 cannot be turned off (S2MPS11 keeps it on anyway) so marking it "always-on" only reflects its real status. 2. PVDD_ABB_1V8 supplies Adaptive Body Bias Generator for ARM cores, memory and Mali (G3D). Signed-off-by:
-
Sakari Ailus authored
[ Upstream commit 9d386373 ] The lack of defaults provided by the caller to v4l2_fwnode_endpoint_parse() signals the use of the default lane mapping. The default lane mapping must not be used however if the firmmare contains the lane mapping. Disable the default lane mapping in that case, and improve the debug messages telling of the use of the defaults. This was missed previously since the default mapping will only unsed in this case if the bus type is set, and no driver did both while still needing the lane mapping configuration. Fixes: b4357d21 ("media: v4l: fwnode: Support default CSI-2 lane mapping for drivers") Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Christoph Vogtländer authored
[ Upstream commit b00ef530 ] It must be made sure that immediate mode is not already set, when modifying shadow register value in ehrpwm_pwm_disable(). Otherwise modifications to the action-qualifier continuous S/W force register(AQSFRC) will be done in the active register. This may happen when both channels are being disabled. In this case, only the first channel state will be recorded as disabled in the shadow register. Later, when enabling the first channel again, the second channel would be enabled as well. Setting RLDCSF to zero, first, ensures that the shadow register is updated as desired. Fixes: 38dabd91 ("pwm: tiehrpwm: Fix disabling of output of PWMs") Signed-off-by:
Christoph Vogtländer <c.vogtlaender@sigma-surface-science.com> [vigneshr@ti.com: Improve commit message] Signed-off-by:
Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by:
-
Andy Shevchenko authored
[ Upstream commit 5ba846b1 ] Intel IOMMU, when enabled, tries to find the domain of the device, assuming it's a PCI one, during DMA operations, such as mapping or unmapping. Since we are splitting the actual PCI device to couple of children via MFD framework (see drivers/mfd/intel-lpss.c for details), the DMA device appears to be a platform one, and thus not an actual one that performs DMA. In a such situation IOMMU can't find or allocate a proper domain for its operations. As a result, all DMA operations are failed. In order to fix this, supply parent of the platform device to the DMA engine framework and fix filter functions accordingly. We may rely on the fact that parent is a real PCI device, because no other configuration is present in the wild. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Mark Brown <broonie@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [for tty parts] Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Christopher N Bednarz authored
[ Upstream commit b58dafbc ] LB_EN for prune switch rules was causing all TX traffic to loopback to the internal switch and dropped. When running bi-directional stress workloads with RDMA the RDPU would hang blocking tx and rx traffic. Signed-off-by:
Christopher N Bednarz <christopher.n.bednarz@intel.com> Reviewed-by:
Bruce Allan <bruce.w.allan@intel.com> Signed-off-by:
Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
[ Upstream commit 277b3a45 ] In VEB mode, enable LAN_EN bit in the action fields for filter rules corresponding to the right recipes. Signed-off-by:
Yashaswini Raghuram Prathivadi Bhayankaram <yashaswini.raghuram.prathivadi.bhayankaram@intel.com> Reviewed-by:
-
Sven Eckelmann authored
[ Upstream commit c2d8b9a6 ] The send functions in batman-adv are expected to consume the skb when either the data is queued up for the underlying driver or when some precondition failed. batadv_dat_send_data didn't do this and instead created a copy of the skb, modified it and queued the copy up for transmission. The caller has to take care that the skb is handled correctly (for example free'd) when batadv_dat_send_data returns. This unclear behavior already lead to memory leaks in the recent past. Renaming the function to batadv_dat_forward_data should make it easier to identify that the data is forwarded but the skb is not actually send+consumed. Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Dafna Hirschfeld authored
[ Upstream commit 09ca38a5 ] If one of the controls fails to set, then 'v4l2_ctrl_request_setup' immediately returns with the error code. Signed-off-by:
Dafna Hirschfeld <dafna3@gmail.com> Reviewed-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Brett Creeley authored
[ Upstream commit 203a068a ] Currently we aren't checking for the ICE_FC_NONE case for the current flow control mode. This is causing "Unknown" to be printed for the current flow control method if flow control is disabled. Fix this by adding the case for ICE_FC_NONE to print "None". Signed-off-by:
Brett Creeley <brett.creeley@intel.com> Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit 21e2118f ] We need to only apply errata 1.101 handling to clear non-wakeup edge gpios for idle to the gpio bank(s) in the wkup domain to prevent spurious wake-up events. And we must restore what we did after idle manually as the gpio bank in wkup domain is not restored otherwise. Let's keep bank->saved_datain register reading separate, that's not related to the 1.101 errata and is used separately on restore. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Tero Kristo <t-kristo@ti.com> Reported-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit da38ef3e ] We are currently assuming all GPIOs are non-wakeup capable GPIOs as we not configuring the bank->non_wakeup_gpios like we used to earlier with platform_data. Let's add omap_gpio_is_off_wakeup_capable() to make the handling clearer while considering that later patches may want to configure SoC specific bank->non_wakeup_gpios for the GPIOs in wakeup domain. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Tero Kristo <t-kristo@ti.com> Reported-by:
-
Bjorn Andersson authored
[ Upstream commit f95f57e4 ] The regulator definition got their supply names cleaned up during upstreaming, so they no longer match the driver defined names. Update the supply names. Also fill out the missing voltage of SMPS 5. Fixes: 0b363f5b ("arm64: dts: qcom: qcs404: Add PMS405 RPM regulators") Reported-by:
Nicolas Dechesne <nicolas.dechesne@linaro.org> Reviewed-by:
Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Andy Gross <andy.gross@linaro.org> Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit 699ca301 ] If __get_free_pages() fails, return -ENOMEM to avoid a NULL pointer dereference. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by:
Steven Price <steven.price@arm.com> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Signed-off-by:
-
Paolo Valente authored
[ Upstream commit 778c02a2 ] If a sync bfq_queue has a higher weight than some other queue, and remains temporarily empty while in service, then, to preserve the bandwidth share of the queue, it is necessary to plug I/O dispatching until a new request arrives for the queue. In addition, a timeout needs to be set, to avoid waiting for ever if the process associated with the queue has actually finished its I/O. Even with the above timeout, the device is however not fed with new I/O for a while, if the process has finished its I/O. If this happens often, then throughput drops and latencies grow. For this reason, the timeout is kept rather low: 8 ms is the current default. Unfortunately, such a low value may cause, on the opposite end, a violation of bandwidth guarantees for a process that happens to issue new I/O too late. The higher the system load, the higher the probability that this happens to some process. This is a problem in scenarios where service guarantees matter more than throughput. One important case are weight-raised queues, which need to be granted a very high fraction of the bandwidth. To address this issue, this commit lower-bounds the plugging timeout for weight-raised queues to 20 ms. This simple change provides relevant benefits. For example, on a PLEXTOR PX-256M5S, with which gnome-terminal starts in 0.6 seconds if there is no other I/O in progress, the same applications starts in - 0.8 seconds, instead of 1.2 seconds, if ten files are being read sequentially in parallel - 1 second, instead of 2 seconds, if, in parallel, five files are being read sequentially, and five more files are being written sequentially Tested-by:
Holger Hoffstätte <holger@applied-asynchrony.com> Tested-by:
Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by:
Paolo Valente <paolo.valente@linaro.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit 1d84353d ] In case ioremap fails, the fix releases resources and returns -ENOMEM to avoid NULL pointer dereferences. Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit ec7f6aad ] When ioremap fails, hga_vram should not be dereferenced. The fix check the failure to avoid NULL pointer dereference. Signed-off-by:
-
Jagan Teki authored
[ Upstream commit a5f50c50 ] GT5663 is capacitive touch controller with customized smart wakeup gestures. Add support for it by adding compatible and supported chip data. The chip data on GT5663 is similar to GT1151, like - config data register has 0x8050 address - config data register max len is 240 - config data checksum has 16-bit Signed-off-by:
Jagan Teki <jagan@amarulasolutions.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Giridhar Malavali authored
[ Upstream commit 0257eda0 ] Driver maintains state machine for processing and completing switch commands. This patch resets FCF_ASYNC_{SENT|ACTIVE} flag to indicate if the previous command is active or sent, in order for next GPSC command to advance the state machine. [mkp: commit desc typo] Signed-off-by:
Giridhar Malavali <gmalavali@marvell.com> Signed-off-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Marek Vasut authored
[ Upstream commit 954b4b75 ] The MSI message address in the RC address space can be 64 bit. The R-Car PCIe RC supports such a 64bit MSI message address as well. The code currently uses virt_to_phys(__get_free_pages()) to obtain a reserved page for the MSI message address, and the return value of which can be a 64 bit physical address on 64 bit system. However, the driver only programs PCIEMSIALR register with the bottom 32 bits of the virt_to_phys(__get_free_pages()) return value and does not program the top 32 bits into PCIEMSIAUR, but rather programs the PCIEMSIAUR register with 0x0. This worked fine on older 32 bit R-Car SoCs, however may fail on new 64 bit R-Car SoCs. Since from a PCIe controller perspective, an inbound MSI is a memory write to a special address (in case of this controller, defined by the value in PCIEMSIAUR:PCIEMSIALR), which triggers an interrupt, but never hits the DRAM _and_ because allocation of an MSI by a PCIe card driver obtains the MSI message address by reading PCIEMSIAUR:PCIEMSIALR in rcar_msi_setup_irqs(), incorrectly programmed PCIEMSIAUR cannot cause memory corruption or other issues. There is however the possibility that if virt_to_phys(__get_free_pages()) returned address above the 32bit boundary _and_ PCIEMSIAUR was programmed to 0x0 _and_ if the system had physical RAM at the address matching the value of PCIEMSIALR, a PCIe card driver could allocate a buffer with a physical address matching the value of PCIEMSIALR and a remote write to such a buffer by a PCIe card would trigger a spurious MSI. Fixes: e015f88c ("PCI: rcar: Add support for R-Car H3 to pcie-rcar") Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit f0d14edd ] In case __get_free_pages() fails and returns NULL, fix the return value to -ENOMEM and release resources to avoid dereferencing a NULL pointer. Signed-off-by:
Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by:
-
Kishon Vijay Abraham I authored
[ Upstream commit fd8a44bd ] Platforms which populate msi_host_init() have their own MSI controller logic. Writing to MSI control registers on platforms which do not use Designware's MSI controller logic might have side effects. To be safe, do not write to MSI control registers if the platform uses its own MSI controller logic instead of Designware's MSI one. Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by:
-
Peng Li authored
[ Upstream commit 72110b56 ] When set 2 same MAC to different function of one port, IMP will return error as the later one may modify the origin one. This will cause bond fail for 2 VFs of one port. Driver just print warning and return 0 with this patch, so if set same MAC address, it will return 0 but do not really configure HW. Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Chao Yu authored
[ Upstream commit 186857c5 ] As Hagbard Celine reported: Hi, this is a long standing bug that I've hit before on older kernels, but I was not able to get the syslog saved because of the nature of the bug. This time I had booted form a pen-drive, and was able to save the log to it's efi-partition. What i did to trigger it was to create a partition and format it f2fs, then mount it with options: "rw,relatime,lazytime,background_gc=on,disable_ext_identify,discard,heap,user_xattr,inline_xattr,acl,inline_data,inline_dentry,flush_merge,data_flush,extent_cache,mode=adaptive,active_logs=6,whint_mode=fs-based,alloc_mode=default,fsync_mode=strict". Then I unpacked a big .tar.xz to the partition (I used a gentoo-stage3-tarball as I was in process of installing Gentoo). Same options just without data_flush gives no problems. Mar 20 20:54:01 usbgentoo kernel: FAT-fs (nvme0n1p4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. Mar 20 21:05:23 usbgentoo kernel: kworker/dying (1588) used greatest stack depth: 12064 bytes left Mar 20 21:06:40 usbgentoo kernel: BUG: stack guard page was hit at 00000000a4b0733c (stack is 0000000056016422..0000000096e7463f) Mar 20 21:06:40 usbgentoo kernel: kernel stack overflow ...... Mar 20 21:06:40 usbgentoo kernel: Call Trace: Mar 20 21:06:40 usbgentoo kernel: read_node_page+0x71/0xf0 Mar 20 21:06:40 usbgentoo kernel: ? xas_load+0x8/0x50 Mar 20 21:06:40 usbgentoo kernel: __get_node_page+0x73/0x2a0 Mar 20 21:06:40 usbgentoo kernel: f2fs_get_dnode_of_data+0x34e/0x580 Mar 20 21:06:40 usbgentoo kernel: f2fs_write_inline_data+0x5e/0x2a0 Mar 20 21:06:40 usbgentoo kernel: __write_data_page+0x421/0x690 Mar 20 21:06:40 usbgentoo kernel: f2fs_write_cache_pages+0x1cf/0x460 Mar 20 21:06:40 usbgentoo kernel: f2fs_write_data_pages+0x2b3/0x2e0 Mar 20 21:06:40 usbgentoo kernel: ? f2fs_inode_chksum_verify+0x1d/0xc0 Mar 20 21:06:40 usbgentoo kernel: ? read_node_page+0x71/0xf0 Mar 20 21:06:40 usbgentoo kernel: do_writepages+0x3c/0xd0 Mar 20 21:06:40 usbgentoo kernel: __filemap_fdatawrite_range+0x7c/0xb0 Mar 20 21:06:40 usbgentoo kernel: f2fs_sync_dirty_inodes+0xf2/0x200 Mar 20 21:06:40 usbgentoo kernel: f2fs_balance_fs_bg+0x2a3/0x2c0 Mar 20 21:06:40 usbgentoo kernel: ? f2fs_inode_dirtied+0x21/0xc0 Mar 20 21:06:40 usbgentoo kernel: f2fs_balance_fs+0xd6/0x2b0 Mar 20 21:06:40 usbgentoo kernel: __write_data_page+0x4fb/0x690 ...... Mar 20 21:06:40 usbgentoo kernel: __writeback_single_inode+0x2a1/0x340 Mar 20 21:06:40 usbgentoo kernel: ? soft_cursor+0x1b4/0x220 Mar 20 21:06:40 usbgentoo kernel: writeback_sb_inodes+0x1d5/0x3e0 Mar 20 21:06:40 usbgentoo kernel: __writeback_inodes_wb+0x58/0xa0 Mar 20 21:06:40 usbgentoo kernel: wb_writeback+0x250/0x2e0 Mar 20 21:06:40 usbgentoo kernel: ? 0xffffffff8c000000 Mar 20 21:06:40 usbgentoo kernel: ? cpumask_next+0x16/0x20 Mar 20 21:06:40 usbgentoo kernel: wb_workfn+0x2f6/0x3b0 Mar 20 21:06:40 usbgentoo kernel: ? __switch_to_asm+0x40/0x70 Mar 20 21:06:40 usbgentoo kernel: process_one_work+0x1f5/0x3f0 Mar 20 21:06:40 usbgentoo kernel: worker_thread+0x28/0x3c0 Mar 20 21:06:40 usbgentoo kernel: ? rescuer_thread+0x330/0x330 Mar 20 21:06:40 usbgentoo kernel: kthread+0x10e/0x130 Mar 20 21:06:40 usbgentoo kernel: ? kthread_create_on_node+0x60/0x60 Mar 20 21:06:40 usbgentoo kernel: ret_from_fork+0x35/0x40 The root cause is that we run into an infinite recursive calling in between f2fs_balance_fs_bg and writepage() as described below: - f2fs_write_data_pages --- A - __write_data_page - f2fs_balance_fs - f2fs_balance_fs_bg --- B - f2fs_sync_dirty_inodes - filemap_fdatawrite - f2fs_write_data_pages --- A ... - f2fs_balance_fs_bg --- B ... In order to fix this issue, let's detect such condition in __write_data_page() and just skip calling f2fs_balance_fs() recursively. Reported-by:
Hagbard Celine <hagbardcelin@gmail.com> Signed-off-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Sven Van Asbroeck authored
[ Upstream commit 0cd0e497 ] Call order on probe(): - max14656_hw_init() enables interrupts on the chip - devm_request_irq() starts processing interrupts, isr could be called immediately - isr: schedules delayed work (irq_work) - irq_work: calls power_supply_changed() - devm_power_supply_register() registers the power supply Depending on timing, it's possible that power_supply_changed() is called on an unregistered power supply structure. Fix by registering the power supply before requesting the irq. Cc: Alexander Kurz <akurz@blala.de> Signed-off-by:
Sven Van Asbroeck <TheSven73@gmail.com> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
-
Junxiao Chang authored
[ Upstream commit e61985d0 ] If punit or telemetry device initialization fails, pmc driver should unregister and return failure. This change is to fix a kernel panic when removing kernel module intel_pmc_ipc. Fixes: 48c19170 ("platform:x86: Add Intel telemetry platform device") Signed-off-by:
Junxiao Chang <junxiao.chang@intel.com> Signed-off-by:
-
Binbin Wu authored
[ Upstream commit 2fef3276 ] In current driver, SET_LATE_SYSTEM_SLEEP_PM_OPS is used to install the callbacks for suspend/resume. GPIO pin may be used as the interrupt pin by some device. However, using SET_LATE_SYSTEM_SLEEP_PM_OPS() to install the callbacks, the resume callback is called after resume_device_irqs(). Unintended interrupts may arrive due to resuming device irqs first, but the GPIO controller is not properly restored. Normally, for a SMP system, there are multiple cores, so even when there are unintended interrupts, BSP gets the chance to initialize the GPIO chip soon. But when there is only 1 core is active (other cores are offlined or single core) during resume, it is more easily to observe the unintended interrupts. This patch renames the suspend/resume function by adding suffix "_noirq", and installs the callbacks using SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(). Signed-off-by:
Binbin Wu <binbin.wu@intel.com> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
-
Kabir Sahane authored
[ Upstream commit 72aff4ec ] This area is used to store keys by HSPPA in case of AM438x SOC. Leave it active. Signed-off-by:
Kabir Sahane <x0153567@ti.com> Signed-off-by:
Andrew F. Davis <afd@ti.com> Signed-off-by:
-
Nicholas Kazlauskas authored
[ Upstream commit a1e07ba8 ] [Why] The input color space for the plane was previously ignored even if it was set. If a limited range YUV format was given to DC then the wrong color transformation matrix was being used since DC assumed that it was full range instead. [How] Respect the given color_space format for the plane if it isn't COLOR_SPACE_UNKNOWN. Otherwise, use the implicit default since DM didn't specify. Signed-off-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by:
Sun peng Li <Sunpeng.Li@amd.com> Acked-by:
Aric Cyr <Aric.Cyr@amd.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Anthony Koo authored
[ Upstream commit 15ae3b28 ] [Why] If link is already enabled at a different rate (for example 5.4 Gbps) then calling VBIOS command table to switch to a new rate (for example 2.7 Gbps) will not take effect. This can lead to link training failure to occur. [How] If the requested link rate is different than the current link rate, the link must be disabled in order to re-enable at the new link rate. In today's logic it is currently only impacting eDP since DP connection types will always disable the link during display detection, when initial link verification occurs. Signed-off-by:
Anthony Koo <Anthony.Koo@amd.com> Reviewed-by:
Tony Cheng <Tony.Cheng@amd.com> Signed-off-by:
-
Tyrel Datwyler authored
[ Upstream commit fb26228b ] The find_dlpar_node() helper returns a device node with its reference incremented. Both the add and remove paths use this helper for find the appropriate node, but fail to release the reference when done. Annotate the find_dlpar_node() helper with a comment about the incremented reference count and call of_node_put() on the obtained device_node in the add and remove paths. Also, fixup a reference leak in the find_vio_slot() helper where we fail to call of_node_put() on the vdevice node after we iterate over its children. Signed-off-by:
Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Andrey Smirnov authored
[ Upstream commit b14c872e ] Since 25aaa75d SDMA driver uses clock rates of "ipg" and "ahb" clock to determine if it needs to configure the IP block as operating at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both clocks as IMX6QDL_CLK_SDMA results in driver incorrectly thinking that ratio is 1:1 which results in broken SDMA funtionality(this at least breaks RAVE SP serdev driver on RDU2). Fix the code to specify IMX6QDL_CLK_IPG as "ipg" clock for SDMA, to avoid detecting incorrect clock ratio. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Cc: Angus Ainslie (Purism) <angus@akkea.ca> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Tested-by:
Adam Ford <aford173@gmail.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Andrey Smirnov authored
[ Upstream commit 89791177 ] Since 25aaa75d SDMA driver uses clock rates of "ipg" and "ahb" clock to determine if it needs to configure the IP block as operating at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both clocks as IMX6SX_CLK_SDMA results in driver incorrectly thinking that ratio is 1:1 which results in broken SDMA funtionality. Fix the code to specify IMX6SX_CLK_IPG as "ipg" clock for SDMA, to avoid detecting incorrect clock ratio. Signed-off-by:
-
