- 19 Jul, 2010 2 commits
-
-
Sage Weil authored
The CLONE and CLONE_RANGE ioctls round up the range of extents being cloned to the block size when the range to clone extends to the end of file (this is always the case with CLONE). It was then using that offset when extending the destination file's i_size. Fix this by not setting i_size beyond the originally requested ending offset. This bug was introduced by a22285a6 (2.6.35-rc1). Signed-off-by:
Sage Weil <sage@newdream.net> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Chris Mason authored
split_leaf was not properly balancing leaves when it was forced to split a leaf twice. This commit adds an extra push left and right before forcing the double split in hopes of getting the slot where we want to insert at either the start or end of the leaf. If the extra pushes do work, then we are able to avoid splitting twice and we keep the tree properly balanced. Signed-off-by:
-
- 11 Jun, 2010 17 commits
-
-
Dan Carpenter authored
The "file" argument for fsync is never null so we can remove this check. What drew my attention here is that 7ea80859: "drop unused dentry argument to ->fsync" introduced an unconditional dereference at the start of the function and that generated a smatch warning. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Dan Carpenter authored
posix_acl_from_xattr() returns both ERR_PTRs and null, but it's OK to pass null values to set_cached_acl() Signed-off-by:
-
Sage Weil authored
If btrfs_ioctl_snap_destroy() deletes a snapshot but finishes with end_transaction(), the cleaner kthread may come in and drop the root in the same transaction. If that's the case, the root's refs still == 1 in the tree when btrfs_del_root() deletes the item, because commit_fs_roots() hasn't updated it yet (that happens during the commit). This wasn't a problem before only because btrfs_ioctl_snap_destroy() would commit the transaction before dropping the dentry reference, so the dead root wouldn't get queued up until after the fs root item was updated in the btree. Since it is not an error to drop the root reference and the root in the same transaction, just drop the BUG_ON() in btrfs_del_root(). Signed-off-by:
-
Shi Weihua authored
when used Posix File System Test Suite(pjd-fstest) to test btrfs, some cases about setfacl failed when noacl mount option used. I simplified used commands in pjd-fstest, and the following steps can reproduce it. ------------------------ # cd btrfs-part/ # mkdir aaa # setfacl -m m::rw aaa <- successed, but not expected by pjd-fstest. ------------------------ I checked ext3, a warning message occured, like as: setfacl: aaa/: Operation not supported Certainly, it's expected by pjd-fstest. So, i compared acl.c of btrfs and ext3. Based on that, a patch created. Fortunately, it works. Signed-off-by:
Shi Weihua <shiwh@cn.fujitsu.com> Signed-off-by:
-
Shi Weihua authored
On btrfs, do the following ------------------ # su user1 # cd btrfs-part/ # touch aaa # getfacl aaa # file: aaa # owner: user1 # group: user1 user::rw- group::rw- other::r-- # su user2 # cd btrfs-part/ # setfacl -m u::rwx aaa # getfacl aaa # file: aaa # owner: user1 # group: user1 user::rwx <- successed to setfacl group::rw- other::r-- ------------------ but we should prohibit it that user2 changing user1's acl. In fact, on ext3 and other fs, a message occurs: setfacl: aaa: Operation not permitted This patch fixed it. Signed-off-by:
-
Dan Carpenter authored
btrfs_lookup_dir_item() can return either ERR_PTRs or null. Signed-off-by:
-
Dan Carpenter authored
btrfs_read_fs_root_no_name() returns ERR_PTRs on error so I added a check for that. It's not clear to me if it can also return NULL pointers or not so I left the original NULL pointer check as is. Signed-off-by:
-
Dan Carpenter authored
This was added by a22285a6: "Btrfs: Integrate metadata reservation with start_transaction". If we goto out here then we skip all the unwinding and there are locks still held etc. Signed-off-by:
-
Dan Carpenter authored
btrfs_iget() returns an ERR_PTR() on failure and not null. Signed-off-by:
-
Dan Carpenter authored
Unwind and return -ENOMEM if the allocation fails here. Signed-off-by:
-
Dan Carpenter authored
If btrfs_lookup_dir_item() fails, we should can just let the mount fail with an error. Signed-off-by:
-
Yan, Zheng authored
Tree blocks can live in data block groups in FS converted from extN. So it's easy to trigger the BUG_ON. Signed-off-by:
Yan Zheng <zheng.yan@oracle.com> Signed-off-by:
-
Yan, Zheng authored
Fix a potential null dereference in relocation.c Signed-off-by:
-
Miao Xie authored
when we use remap_file_pages() to remap a file, remap_file_pages always return error. It is because btrfs didn't set VM_CAN_NONLINEAR for vma. Signed-off-by:
Miao Xie <miaox@cn.fujitsu.com> Signed-off-by:
-
Dan Carpenter authored
refs can be used with uninitialized data if btrfs_lookup_extent_info() fails on the first pass through the loop. In the original code if that happens then check_path_shared() probably returns 1, this patch changes it to return 1 for safety. Signed-off-by:
-
Josef Bacik authored
Seems that when btrfs_fallocate was converted to use the new ENOSPC stuff we dropped passing the mode to the function that actually does the preallocation. This breaks anybody who wants to use FALLOC_FL_KEEP_SIZE. Thanks, Signed-off-by:
Josef Bacik <josef@redhat.com> Signed-off-by:
-
Miao Xie authored
We cannot use the loop device which has been connected to a file in the btrf The reproduce steps is following: # dd if=/dev/zero of=vdev0 bs=1M count=1024 # losetup /dev/loop0 vdev0 # mkfs.btrfs /dev/loop0 ... failed to zero device start -5 The reason is that the btrfs don't implement either ->write_begin or ->write the VFS API, so we fix it by setting ->write to do_sync_write(). Signed-off-by:
-
- 27 May, 2010 5 commits
-
-
Chris Mason authored
The ENOSPC code will now return ENOSPC to btrfs_start_transaction. btrfs_dirty_inode needs to check for this and error out appropriately. Signed-off-by: -
Chris Mason authored
In order to support DIO that isn't aligned to the filesystem blocksize, we fall back to buffered for any unaligned DIOs. Signed-off-by: -
Chris Mason authored
Less printk is good printk. Signed-off-by: -
Yan, Zheng authored
After the path is released, the generation number got from block pointer is no long valid. The race may cause disk corruption, because verify_parent_transid() calls clear_extent_buffer_uptodate() when generation numbers mismatch. Signed-off-by:
-
Chris Mason authored
The O_DIRECT code wasn't checking for multiple references on preallocated or nodatacow extents. This means it wasn't honoring snapshots properly. The fix here is to add an explicit check for multiple references This also fixes the math for selecting the correct disk block, making sure not to go past the end of the extent. Signed-off-by:
-
- 26 May, 2010 3 commits
-
-
Chris Mason authored
btrfs_dirty_inode tries to sneak in without much waiting or space reservation, mostly for performance reasons. This usually works well but can cause problems when there are many many writers. When btrfs_update_inode fails with ENOSPC, we fallback to a slower btrfs_start_transaction call that will reserve some space. Signed-off-by: -
Chris Mason authored
This moves the delalloc space reservation done for O_DIRECT into btrfs_direct_IO. This way we don't leak reserved space if the generic O_DIRECT write code errors out before it calls into btrfs_direct_IO. Signed-off-by: -
Chris Mason authored
This changes O_DIRECT write code to mark extents as delalloc while it is processing them. Yan Zheng has reworked the enospc accounting based on tracking delalloc extents and this makes it much easier to track enospc in the O_DIRECT code. There are a few space cases with the O_DIRECT code though, it only sets the EXTENT_DELALLOC bits, instead of doing EXTENT_DELALLOC | EXTENT_DIRTY | EXTENT_UPTODATE, because we don't want to mess with clearing the dirty and uptodate bits when things go wrong. This is important because there are no pages in the page cache, so any extent state structs that we put in the tree won't get freed by releasepage. We have to clear them ourselves as the DIO ends. With this commit, we reserve space at in btrfs_file_aio_write, and then as each btrfs_direct_IO call progresses it sets EXTENT_DELALLOC on the range. btrfs_get_blocks_direct is responsible for clearing the delalloc at the same time it drops the extent lock. Signed-off-by:
-
- 25 May, 2010 13 commits
-
-
Chris Mason authored
The async helper threads offload crc work onto all the CPUs, and make streaming writes much faster. This changes the O_DIRECT write code to use them. The only small complication was that we need to pass in the logical offset in the file for each bio, because we can't find it in the bio's pages. Signed-off-by: -
Chris Mason authored
Yan Zheng noticed two places we were doing a lot of work without task->state set to TASK_RUNNING. This sets the state properly after we get ready to sleep but decide not to. Signed-off-by: -
Josef Bacik authored
In order for AIO to work, we need to implement aio_write. This patch converts our btrfs_file_write to btrfs_aio_write. I've tested this with xfstests and nothing broke, and the AIO stuff magically started working. Thanks, Signed-off-by:
-
Josef Bacik authored
This provides basic DIO support for reading and writing. It does not do the work to recover from mismatching checksums, that will come later. A few design changes have been made from Jim's code (sorry Jim!) 1) Use the generic direct-io code. Jim originally re-wrote all the generic DIO code in order to account for all of BTRFS's oddities, but thanks to that work it seems like the best bet is to just ignore compression and such and just opt to fallback on buffered IO. 2) Fallback on buffered IO for compressed or inline extents. Jim's code did it's own buffering to make dio with compressed extents work. Now we just fallback onto normal buffered IO. 3) Use ordered extents for the writes so that all of the lock_extent() lookup_ordered() type checks continue to work. 4) Do the lock_extent() lookup_ordered() loop in readpage so we don't race with DIO writes. I've tested this with fsx and everything works great. This patch depends on my dio and filemap.c patches to work. Thanks, Signed-off-by:
-
Josef Bacik authored
Btrfs cannot handle having logically non-contiguous requests submitted. For example if you have Logical: [0-4095][HOLE][8192-12287] Physical: [0-4095] [4096-8191] Normally the DIO code would put these into the same BIO's. The problem is we need to know exactly what offset is associated with what BIO so we can do our checksumming and unlocking properly, so putting them in the same BIO doesn't work. So add another check where we submit the current BIO if the physical blocks are not contigous OR the logical blocks are not contiguous. Signed-off-by:
-
Josef Bacik authored
Because BTRFS can do RAID and such, we need our own submit hook so we can setup the bio's in the correct fashion, and handle checksum errors properly. So there are a few changes here 1) The submit_io hook. This is straightforward, just call this instead of submit_bio. 2) Allow the fs to return -ENOTBLK for reads. Usually this has only worked for writes, since writes can fallback onto buffered IO. But BTRFS needs the option of falling back on buffered IO if it encounters a compressed extent, since we need to read the entire extent in and decompress it. So if we get -ENOTBLK back from get_block we'll return back and fallback on buffered just like the write case. I've tested these changes with fsx and everything seems to work. Thanks, Signed-off-by:
-
Josef Bacik authored
This is similar to what already happens in the write case. If we have a short read while doing O_DIRECT, instead of just returning, fallthrough and try to read the rest via buffered IO. BTRFS needs this because if we encounter a compressed or inline extent during DIO, we need to fallback on buffered. If the extent is compressed we need to read the entire thing into memory and de-compress it into the users pages. I have tested this with fsx and everything works great. Thanks, Signed-off-by:
-
Yan, Zheng authored
This patch adds metadata ENOSPC handling for the balance code. It is consisted by following major changes: 1. Avoid COW tree leave in the phrase of merging tree. 2. Handle interaction with snapshot creation. 3. make the backref cache can live across transactions. Signed-off-by:
-
Yan, Zheng authored
Pre-allocate space for data relocation. This can detect ENOPSC condition caused by fragmentation of free space. Signed-off-by:
-
Yan, Zheng authored
Previous patches make the allocater return -ENOSPC if there is no unreserved free metadata space. This patch updates tree log code and various other places to propagate/handle the ENOSPC error. Signed-off-by:
-
Yan, Zheng authored
reserve metadata space for handling orphan inodes Signed-off-by:
-
Yan, Zheng authored
Reserve metadata space for extent tree, checksum tree and root tree Signed-off-by:
-
Yan, Zheng authored
Introduce metadata reservation context for delayed allocation and update various related functions. This patch also introduces EXTENT_FIRST_DELALLOC control bit for set/clear_extent_bit. It tells set/clear_bit_hook whether they are processing the first extent_state with EXTENT_DELALLOC bit set. This change is important if set/clear_extent_bit involves multiple extent_state. Signed-off-by:
-
