- 09 Jul, 2016 5 commits
-
-
Bartlomiej Zolnierkiewicz authored
This patch disables deprecated IDE subsystem in pq2fads_defconfig (no IDE host drivers are selected in this config so there is no valid reason to enable IDE subsystem itself). Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
Scott Wood <oss@buserror.net>
-
Alessio Igor Bogani authored
Add support for the Artesyn MVME7100 Single Board Computer. The MVME7100 is a 6U form factor VME64 computer with: - A two e600 cores Freescale MPC8641D CPU - 2 GB of DDR2 onboard memory - Four Gigabit Ethernets - Five 16550 compatible UARTs - One USB 2.0 port - Two PCI/PCI eXpress Mezzanine Card (PMC/XMC) Slots - A DS1375 Real Time Clock (RTC) - 512 KB of Non-Volatile Memory (NVRAM) - Two 64 KB EEPROMs - 128 MB NOR and 4/8 GB NAND Flash This patch is based on linux-4.7-rc1 and has been only boot tested. Limitations: This patch covers only models 171 and 173 No plans to support CPLD timers Know issues: All four PHYs work in polling mode Configuration is missing for: PCI IDSEL and PCI Interrupt definition Support is missing for: Cache and memory controllers (which are very similar to the 85xx ones but right now I don't know if we can re-use their support) Watchdog, USB, NVRAM, NOR, NAND, EEPROMs, VME, PMC/XMC and RTC Signed-off-by:Alessio Igor Bogani <alessio.bogani@elettra.eu> Signed-off-by:
-
Sriram Dash authored
Add usb aliases for consistency with the other platforms. Signed-off-by:
Laurentiu Tudor <Laurentiu.Tudor@freescale.com> Signed-off-by:
Sriram Dash <sriram.dash@nxp.com> Signed-off-by:
-
Sriram Dash authored
Change USB controller version name to 2.5 in compatible string for T1040 Signed-off-by:
-
Claudiu Manoil authored
If the SRAM region parameters are missing the SRAM driver probing exits and the L2 region is configured as L2 cache entirely. This is the expected default behaviour, so it makes no sense to report it as an error. Signed-off-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by:
-
- 07 Jul, 2016 6 commits
-
-
Guilherme G. Piccoli authored
The domain/PHB field of PCI addresses has its value obtained from a global variable, incremented each time a new domain (represented by struct pci_controller) is added on the system. The domain addition process happens during boot or due to PHB hotplug add. As recent kernels are using predictable naming for network interfaces, the network stack is more tied to PCI naming. This can be a problem in hotplug scenarios, because PCI addresses will change if devices are removed and then re-added. This situation seems unusual, but it can happen if a user wants to replace a NIC without rebooting the machine, for example. This patch changes the way PCI domain values are generated: now, we use device-tree properties to assign fixed PHB numbers to PCI addresses when available (meaning pSeries and PowerNV cases). We also use a bitmap to allow dynamic PHB numbering when device-tree properties are not used. This bitmap keeps track of used PHB numbers and if a PHB is released (by hotplug operations for example), it allows the reuse of this PHB number, avoiding PCI address to change in case of device remove and re-add soon after. No functional changes were introduced. Signed-off-by:
Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Reviewed-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by:
Ian Munsie <imunsie@au1.ibm.com> Acked-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Michael Ellerman authored
Signed-off-by: -
Michael Ellerman authored
Despite attempting to fix this in commit fb36e907 ("powerpc/pci: Fix SRIOV not building without EEH enabled"), the build is still broken when PCI_IOV=y and EEH=n (eg. g5_defconfig with PCI_IOV=y): arch/powerpc/kernel/pci_dn.c: In function ‘remove_dev_pci_data’: arch/powerpc/kernel/pci_dn.c:230:18: error: unused variable ‘edev’ Incorporate Ben's idea of using __maybe_unused to avoid so many #ifdefs. Signed-off-by:
-
Benjamin Herrenschmidt authored
For memory hotplug to work, the MMU code needs to provide the functions create_section_mapping() and remove_section_mapping() to respectively map and unmap portions of the linear mapping. At the moment only hash64 provides these, so we provide weak stubs that just error out. This fixes the build with configurations such as 64-bit BookE with CONFIG_MEMORY_HOTPLUG enabled. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Benjamin Herrenschmidt authored
Signed-off-by:
-
Michael Ellerman authored
Use "Delta" to refer to the difference between measurements, rather than "Error", so scripts that look for "Error" aren't confused into thinking there was a failure. Signed-off-by:
-
- 05 Jul, 2016 19 commits
-
-
Oliver O'Halloran authored
This patch adds an OPAL console backend to the powerpc boot wrapper so that decompression failures inside the wrapper can be reported to the user. This is important since it typically indicates data corruption in the firmware and other nasty things. Currently this only works when building a little endian kernel. When compiling a 64 bit BE kernel the wrapper is always build 32 bit to be compatible with some 32 bit firmwares. BE support will be added at a later date. Another limitation of this is that only the "raw" type of OPAL console is supported, however machines that provide a hvsi console also provide a raw console so this is not an issue in practice. Actually-written-by:
Oliver O'Halloran <oohall@gmail.com> [mpe: Move #ifdef __powerpc64__ to avoid warnings on 32-bit] Signed-off-by:
-
Oliver O'Halloran authored
This patch adds the kernel command line parameter "no_tb_segs" which forces the kernel to use 256MB rather than 1TB segments. Forcing the use of 256MB segments makes it considerably easier to test code that depends on an SLB miss occurring. Suggested-by:
Michael Neuling <mikey@neuling.org> Suggested-by:
-
Oliver O'Halloran authored
Power ISAv3 adds a large decrementer (LD) mode which increases the size of the decrementer register. The size of the enlarged decrementer register is between 32 and 64 bits with the exact size being dependent on the implementation. When in LD mode, reads are sign extended to 64 bits and a decrementer exception is raised when the high bit is set (i.e the value goes below zero). Writes however are truncated to the physical register width so some care needs to be taken to ensure that the high bit is not set when reloading the decrementer. This patch adds support for using the LD inside the host kernel on processors that support it. When LD mode is supported firmware will supply the ibm,dec-bits property for CPU nodes to allow the kernel to determine the maximum decrementer value. Enabling LD mode is a hypervisor privileged operation so the kernel can only enable it manually when running in hypervisor mode. Guests that support LD mode can request it using the "ibm,client-architecture-support" firmware call (not implemented in this patch) or some other platform specific method. If this property is not supplied then the traditional decrementer width of 32 bit is assumed and LD mode will not be enabled. This patch was based on initial work by Jack Miller. Signed-off-by:
Balbir Singh <bsingharora@gmail.com> Acked-by:
-
Anton Blanchard authored
Check the assembler supports -maltivec by wrapping it with call as-option. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Rasmus Villemoes authored
cmm_mem_going_offline() is (only) called from cmm_memory_cb(), which sends the return value through notifier_from_errno(). The latter expects 0 or -errno (notifier_to_errno(notifier_from_errno(x)) is 0 for any x >= 0, so passing a positive value cannot make sense). Hence negate ENOMEM. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
-
Andrew Donnellan authored
If ppc_rtas() is called with args.nargs == 16 and args.nret == 0, args.rets is set to point to &args.args[16], which is beyond the end of the args.args array. This results in a minor read overrun of the array when we check the first return code (which, per PAPR, is a required output of all RTAS calls) to see if there's been a hardware error. Change the nargs/nret check to ensure nargs is <= 15, allowing room for the status code. Users shouldn't be calling with nret == 0, but there's no real harm if they do, so we don't stop them. Signed-off-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by:
-
Chris Smart authored
Test that an ISA 3.0 compliant machine performing an unaligned copy, copy_first, paste or paste_last is sent a SIGBUS. Signed-off-by:
Chris Smart <chris@distroguy.com> Signed-off-by:
-
Chris Smart authored
Calling ISA 3.0 instructions copy, copy_first, paste and paste_last generates an alignment fault when copying or pasting unaligned data (128 byte). We catch this and send SIGBUS to the userspace process that caused it. We do not emulate these because paste may contain additional metadata when pasting to a co-processor and paste_last is the synchronisation point for preceding copy/paste sequences. Thanks to Michael Neuling <mikey@neuling.org> for his help. Signed-off-by:
-
Michael Ellerman authored
These are useful little loops for smoke testing performance. Signed-off-by:
-
Cyril Bur authored
Currently it doesn't appear the resulting binary actually uses any Altivec or VSX instructions the solution is to explicitly tell GCC to use vector instructions and use vector types in the code. Part of this this issue can be GCC version specific: GCC 4.9.x is happy to use Altivec and VSX instructions if altivec.h is includedi (and possibly if vector types are used), this also means that 4.9.x will use VSX instructions even if only -maltivec is passed. It is also possible that Altivec instructions will be used even without -maltivec or -mabi=altivec. GCC 5.2.x complains about the lack of -maltivec parameter if altivec.h is included and will not use VSX unless -mvsx is present on commandline. GCC 5.3.0 has a regression that means __attribute__((__target__("no-vsx")) fails to build. A fix is targeted for 5.4. Furthermore LTO (Link Time Optimisation) doesn't play well with __attribute__((__target__("no-vsx")), LTO can cause GCC to forget about the attribute and compile with VSX instructions regardless. Be wary when enabling -flfo for this test. Signed-off-by:Cyril Bur <cyrilbur@gmail.com> Signed-off-by:
-
Cyril Bur authored
When we inverted the behaviour of the flags we forgot to update the usage message. Fixes: 51c21e72 ("selftests/powerpc: Make context_switch touch FP/altivec/vector by default") Signed-off-by:
-
Cyril Bur authored
Excerpt from man 2 perf_event_open: /proc/sys/kernel/perf_event_paranoid The perf_event_paranoid file can be set to restrict access to the performance counters. 2 allow only user-space measurements. 1 allow both kernel and user measurements (default). 0 allow access to CPU-specific data but not raw tracepoint samples. -1 no restrictions. require_paranoia_below() should return 0 if perf_event_paranoid is below a specified level, the value from perf_event_paranoid is read into an unsigned long so the incorrect value is returned when perf_event_paranoid is set to -1. Without this patch applied there is the same number of selftests/powerpc which skip when /proc/sys/kernel/perf_event_paranoid is set to 1 or -1 but no skips when set to zero. With this patch applied there are no skipped selftests/powerpc test when /proc/sys/kernel/perf_event_paranoid is set to 0 or -1. Signed-off-by: -
Madhavan Srinivasan authored
Export the generic hardware and cache perf events for Power9 to sysfs, so users can determine the PMU event monitored. Signed-off-by:
Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by:
-
Madhavan Srinivasan authored
This patch adds base enablement for the power9 PMU. Signed-off-by:
-
Madhavan Srinivasan authored
Add macros for the generic and cache events on Power9 Signed-off-by:
-
Madhavan Srinivasan authored
Factor out the power8 pmu init functions to share with power9. Monitor Mode Control Register S(MMCRS) and Monitor Mode Control Register H(MMCRH) registers are dropped in Power9. These registers are added to new function which are included for power8 init. Signed-off-by:
-
Madhavan Srinivasan authored
Factor out some of the power8 pmu functions to new file "isa207-common.c" to share with power9 pmu code. Only code movement and no logic change Signed-off-by:
-
Madhavan Srinivasan authored
Factor out some of the power8 pmu macros to new a header file to share with power9 pmu code. Just code movement and no logic change. Signed-off-by:
-
Michael Ellerman authored
We spent so much time bike-shedding the printk() we missed that the next line was missing a semi-colon. And it seems none of our defconfigs turn on CONFIG_FA_DUMP. Fixes: 4a03749f ("powerpc/fadump: Trivial fix of spelling mistake, clean up message") Signed-off-by:
-
- 29 Jun, 2016 3 commits
-
-
Suraj Jitindar Singh authored
Implement new character device driver to allow access from user space to the operator panel display present on IBM Power Systems machines with FSPs. This will allow status information to be presented on the display which is visible to a user. The driver implements a character buffer which a user can read/write by accessing the device (/dev/op_panel). This buffer is then displayed on the operator panel display. Any attempt to write past the last character position will have no effect and attempts to write more characters than the size of the display will be truncated. The device may only be accessed by a single process at a time. Signed-off-by:
Suraj Jitindar Singh <sjitindarsingh@gmail.com> Reviewed-by:
-
Suraj Jitindar Singh authored
An opal_msg of type OPAL_MSG_ASYNC_COMP contains the return code in the params[1] struct member. However this isn't intuitive or obvious when reading the code and requires that a user look at the skiboot documentation or opal-api.h to verify this. Add an inline function to get the return code from an opal_msg and update call sites accordingly. Signed-off-by:
-
Suraj Jitindar Singh authored
Add a binding to Documentation/devicetree/bindings/powerpc/opal (oppanel-opal.txt) for the operator panel which is present on IBM Power Systems machines with FSPs. Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by:
-
- 28 Jun, 2016 4 commits
-
-
Michael Neuling authored
This provides AFU drivers a means to associate private data with a cxl context. This is particularly intended for make the new callbacks for driver specific events easier for AFU drivers to use, as they can easily get back to any private data structures they may use. Signed-off-by:
Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Reviewed-by:
-
Philippe Bergheaud authored
This adds an afu_driver_ops structure with fetch_event() and event_delivered() callbacks. An AFU driver such as cxlflash can fill this out and associate it with a context to enable passing custom AFU specific events to userspace. This also adds a new kernel API function cxl_context_pending_events(), that the AFU driver can use to notify the cxl driver that new specific events are ready to be delivered, and wake up anyone waiting on the context wait queue. The current count of AFU driver specific events is stored in the field afu_driver_events of the context structure. The cxl driver checks the afu_driver_events count during poll, select, read, etc. calls to check if an AFU driver specific event is pending, and calls fetch_event() to obtain and deliver that event. This way, the cxl driver takes care of all the usual locking semantics around these calls and handles all the generic cxl events, so that the AFU driver only needs to worry about it's own events. fetch_event() return a struct cxl_event_afu_driver_reserved, allocated by the AFU driver, and filled in with the specific event information and size. Total event size (header + data) should not be greater than CXL_READ_MIN_SIZE (4K). Th cxl driver prepends an appropriate cxl event header, copies the event to userspace, and finally calls event_delivered() to return the status of the operation to the AFU driver. The event is identified by the context and cxl_event_afu_driver_reserved pointers. Since AFU drivers provide their own means for userspace to obtain the AFU file descriptor (i.e. cxlflash uses an ioctl on their scsi file descriptor to obtain the AFU file descriptor) and the generic cxl driver will never use this event, the ABI of the event is up to each individual AFU driver. Signed-off-by:
Philippe Bergheaud <felix@linux.vnet.ibm.com> Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in pr_debug() message. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
Fix trivial spelling mistake "rgistration". Also use pr_err() instead of printk() and unsplit the string to keep it all on one line. Signed-off-by:
-
- 24 Jun, 2016 3 commits
-
-
Benjamin Herrenschmidt authored
If a PHB has no I/O space, there's no need to make it look like something bad happened, a pr_debug() is plenty enough since this is the case of all our modern POWER chips. Signed-off-by:
-
Naveen N. Rao authored
PPC64 eBPF JIT compiler. Enable with: echo 1 > /proc/sys/net/core/bpf_jit_enable or echo 2 > /proc/sys/net/core/bpf_jit_enable ... to see the generated JIT code. This can further be processed with tools/net/bpf_jit_disasm. With CONFIG_TEST_BPF=m and 'modprobe test_bpf': test_bpf: Summary: 305 PASSED, 0 FAILED, [297/297 JIT'ed] ... on both ppc64 BE and LE. The details of the approach are documented through various comments in the code. Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by:
-
Naveen N. Rao authored
Break out classic BPF JIT specifics into a separate header in preparation for eBPF JIT implementation. Note that ppc32 will still need the classic BPF JIT. Acked-by:
-
