- 01 Dec, 2018 17 commits
-
-
Emmanuel Grumbach authored
commit 82715ac7 upstream. When the firmware starts, it doesn't have any regulatory information, hence it uses the world wide limitations. The driver can feed the firmware with previous knowledge that was kept in the driver, but the firmware may still not update its internal tables. This happens when we start a BSS interface, and then the firmware can change the regulatory tables based on our location and it'll use more lenient, location specific rules. Then, if the firmware is shut down (when the interface is brought down), and then an AP interface is created, the firmware will forget the country specific rules. The host will think that we are in a certain country that may allow channels and will try to teach the firmware about our location, but the firmware may still not allow to drop the world wide limitations and apply country specific rules because it was just re-started. In this case, the firmware will reply with MCC_RESP_ILLEGAL to the MCC_UPDATE_CMD. In that case, iwlwifi needs to let the upper layers (cfg80211 / hostapd) know that the channel list they know about has been updated. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=201105 Cc: stable@vger.kernel.org Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Emmanuel Grumbach authored
commit ec484d03 upstream. The oldest firmware supported by iwlmvm do support getting the average beacon RSSI. Enable the sta_statistics() call from mac80211 even on older firmware versions. Fixes: 33cef925 ("iwlwifi: mvm: support beacon statistics for BSS client") Cc: stable@vger.kernel.org # 4.2+ Signed-off-by:
-
Vladimir Zapolskiy authored
commit a05a1404 upstream. The change corrects the error path in gpiochip_add_data_with_key() by avoiding to call ida_simple_remove(), if ida_simple_get() returns an error. Note that ida_simple_remove()/ida_free() throws a BUG(), if id argument is negative, it allows to easily check the correctness of the fix by fuzzing the return value from ida_simple_get(). Fixes: ff2b1359 ("gpio: make the gpiochip a real device") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by:
Vladimir Zapolskiy <vz@mleia.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Rajat Jain authored
commit cdcefe6b upstream. Problem: The card detect IRQ does not work with modern BIOS (that want to use _DSD to provide the card detect GPIO to the driver). Details: The mmc core provides the mmc_gpiod_request_cd() API to let host drivers request the gpio descriptor for the "card detect" pin. This pin is specified in the ACPI for the SDHC device: * Either as a resource using _CRS. This is a method used by legacy BIOS. (The driver needs to tell which resource index). * Or as a named property ("cd-gpios"/"cd-gpio") in _DSD (which internally points to an entry in _CRS). This way, the driver can lookup using a string. This is what modern BIOS prefer to use. This API finally results in a call to the following code: struct gpio_desc *acpi_find_gpio(..., const char *con_id,...) { ... /* Lookup gpio (using "<con_id>-gpio") in the _DSD */ ... if (!acpi_can_fallback_to_crs(adev, con_id)) return ERR_PTR(-ENOENT); ... /* Falling back to _CRS is allowed, Lookup gpio in the _CRS */ ... } Note that this means that if the ACPI has _DSD properties, the kernel will never use _CRS for the lookup (Because acpi_can_fallback_to_crs() will always be false for any device hat has _DSD entries). The SDHCI driver is thus currently broken on a modern BIOS, even if BIOS provides both _CRS (for index based lookup) and _DSD entries (for string based lookup). Ironically, none of these will be used for the lookup currently because: * Since the con_id is NULL, acpi_find_gpio() does not find a matching entry in DSDT. (The _DSDT entry has the property name = "cd-gpios") * Because ACPI contains DSDT entries, thus acpi_can_fallback_to_crs() returns false (because device properties have been populated from _DSD), thus the _CRS is never used for the lookup. Fix: Try "cd" for lookup in the _DSD before falling back to using NULL so as to try looking up in the _CRS. I've tested this patch successfully with both Legacy BIOS (that provide only _CRS method) as well as modern BIOS (that provide both _CRS and _DSD). Also the use of "cd" appears to be fairly consistent across other users of this API (other MMC host controller drivers). Link: https://lkml.org/lkml/2018/9/25/1113Signed-off-by:
Rajat Jain <rajatja@google.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Fixes: f10e4bf6 ("gpio: acpi: Even more tighten up ACPI GPIO lookups") Cc: stable@vger.kernel.org Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Greg Kroah-Hartman authored
commit cb5d2194 upstream. Sasha has somehow been convinced into helping me with the stable kernel maintenance. Codify this slip in good judgement before he realizes what he really signed up for :) Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit 65766ee0 upstream. PCM OSS layer may allocate a few temporary buffers, one for the core read/write and another for the conversions via plugins. Currently both are allocated via vmalloc(). But as the allocation size is equivalent with the PCM period size, the required size might be quite small, depending on the application. This patch replaces these vmalloc() calls with kvzalloc() for covering small period sizes better. Also, we use "z"-alloc variant here for addressing the possible uninitialized access reported by syzkaller. Reported-by: syzbot+1cb36954e127c98dd037@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Aaron Ma authored
commit a5baeaea upstream. This definition is used by msecs_to_jiffies in milliseconds. According to the comments, max rexit timeout should be 20ms. Align with the comments to properly calculate the delay. Verified on Sunrise Point-LP and Cannon Lake. Cc: stable@vger.kernel.org Signed-off-by:
Aaron Ma <aaron.ma@canonical.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Sandeep Singh authored
commit d9193efb upstream. Observed "TRB completion code (27)" error which corresponds to Stopped - Length Invalid error(xhci spec section 4.17.4) while connecting USB to SATA bridge. Looks like this case was not considered when the following patch[1] was committed. Hence adding this new check which can prevent the invalid byte size error. [1] ade2e3a1 xhci: handle transfer events without TRB pointer Cc: <stable@vger.kernel.org> Signed-off-by:
Sandeep Singh <sandeep.singh@amd.com> cc: Nehal Shah <Nehal-bakulchandra.Shah@amd.com> cc: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by:
-
Andy Shevchenko authored
commit 08fd9a82 upstream. If dwc3_core_init_mode() fails with deferred probe, next probe fails on sysfs with sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:11.0/dwc3.0.auto/dwc3.0.auto.ulpi' To avoid this failure, clean up ULPI device. Cc: <stable@vger.kernel.org> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Thinh Nguyen authored
commit ba3a51ac upstream. Current check for the last extra TRB for zero and unaligned transfers does not account for isoc OUT. The last TRB of the Buffer Descriptor for isoc OUT transfers will be retired with HWO=0. As a result, we won't return early. The req->remaining will be updated to include the BUFSIZ count of the extra TRB, and the actual number of transferred bytes calculation will be wrong. To fix this, check whether it's a short or zero packet and the last TRB chain bit to return early. Fixes: c6267a51 ("usb: dwc3: gadget: align transfers to wMaxPacketSize") Cc: <stable@vger.kernel.org> Signed-off-by:
Thinh Nguyen <thinhn@synopsys.com> Signed-off-by:
-
Felipe Balbi authored
commit 2fc6d4be upstream. When chaining ISOC TRBs together, only the first ISOC TRB should be of type ISOC_FIRST, all others should be of type ISOC. This patch fixes that. Fixes: c6267a51 ("usb: dwc3: gadget: align transfers to wMaxPacketSize") Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by:
-
Dennis Wassenberg authored
commit 22454b79 upstream. This will clear the USB_PORT_FEAT_C_CONNECTION bit in case of a hub port reset only if a device is was attached to the hub port before resetting the hub port. Using a Lenovo T480s attached to the ultra dock it was not possible to detect some usb-c devices at the dock usb-c ports because the hub_port_reset code will clear the USB_PORT_FEAT_C_CONNECTION bit after the actual hub port reset. Using this device combo the USB_PORT_FEAT_C_CONNECTION bit was set between the actual hub port reset and the clear of the USB_PORT_FEAT_C_CONNECTION bit. This ends up with clearing the USB_PORT_FEAT_C_CONNECTION bit after the new device was attached such that it was not detected. This patch will not clear the USB_PORT_FEAT_C_CONNECTION bit if there is currently no device attached to the port before the hub port reset. This will avoid clearing the connection bit for new attached devices. Signed-off-by:
Dennis Wassenberg <dennis.wassenberg@secunet.com> Acked-by:
-
Stefan Agner authored
(commit 4ea7bdc6 upstream) As documented in GCC naked functions should only use basic ASM syntax. The extended ASM or mixture of basic ASM and "C" code is not guaranteed. Currently this works because it was hard coded to follow and check GCC behavior for arguments and register placement. Furthermore with clang using parameters in Extended asm in a naked function is not supported: arch/arm/firmware/trusted_foundations.c:47:10: error: parameter references not allowed in naked functions : "r" (type), "r" (arg1), "r" (arg2) ^ Use a regular function to be more portable. This aligns also with the other SMC call implementations e.g. in qcom_scm-32.c and bcm_kona_smc.c. Cc: Dmitry Osipenko <digetx@gmail.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Stefan Agner authored
(commit 10d87134 upstream) Mixing asm and C code is not recommended in a naked function by gcc and leads to an error when using clang: drivers/bus/arm-cci.c:2107:2: error: non-ASM statement in naked function is not supported unreachable(); ^ While the function is marked __naked it actually properly return in asm. There is no need for the unreachable() call. GCC 7.2 generates identical object files before and after, other than (for obvious reasons) the line numbers generated by WANT_WARN_ON_SLOWPATH for all the WARN()s appearing later in the file. Suggested-by:
Russell King <linux@arm.linux.org.uk> Signed-off-by:
Nicolas Pitre <nico@linaro.org> Reviewed-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Stefan Agner authored
(commit c1c38668 upstream) Use cc-options call for compiler options which are not available in clang. With this patch an ARMv7 multi platform kernel can be successfully build using clang (tested with version 5.0.1). Based-on-patches-by:
Behan Webster <behanw@converseincode.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Stefan Agner authored
(commit 22905a24 upstream) According to GCC documentation -m(no-)thumb-interwork is meaningless in AAPCS configurations. Also clang does not support the flag: clang-5.0: error: unknown argument: '-mno-thumb-interwork' Just drop -mno-thumb-interwork in AEABI configuration. Signed-off-by:
-
Alistair Strachan authored
(commit 41f1c484 upstream) When building with CONFIG_EFI and CONFIG_EFI_STUB on ARM, the libstub Makefile would use -mno-single-pic-base without checking it was supported by the compiler. As the ARM (32-bit) clang backend does not support this flag, the build would fail. This changes the Makefile to check the compiler's support for -mno-single-pic-base before using it, similar to c1c38668 ("ARM: 8767/1: add support for building ARM kernel with clang"). Signed-off-by:
Alistair Strachan <astrachan@google.com> Reviewed-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> [ND: adjusted due to missing commit ce279d37 ("efi/libstub: Only disable stackleak plugin for arm64")] Signed-off-by:
-
- 27 Nov, 2018 23 commits
-
-
Greg Kroah-Hartman authored
-
Ilya Dryomov authored
commit 7e241f64 upstream. skb_can_coalesce() allows coalescing neighboring slab objects into a single frag: return page == skb_frag_page(frag) && off == frag->page_offset + skb_frag_size(frag); ceph_tcp_sendpage() can be handed slab pages. One example of this is XFS: it passes down sector sized slab objects for its metadata I/O. If the kernel client is co-located on the OSD node, the skb may go through loopback and pop on the receive side with the exact same set of frags. When tcp_recvmsg() attempts to copy out such a frag, hardened usercopy complains because the size exceeds the object's allocated size: usercopy: kernel memory exposure attempt detected from ffff9ba917f20a00 (kmalloc-512) (1024 bytes) Although skb_can_coalesce() could be taught to return false if the resulting frag would cross a slab object boundary, we already have a fallback for non-refcounted pages. Utilize it for slab pages too. Cc: stable@vger.kernel.org # 4.8+ Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Eric Biggers authored
commit 8c01db76 upstream. When a UHID_CREATE command is written to the uhid char device, a copy_from_user() is done from a user pointer embedded in the command. When the address limit is KERNEL_DS, e.g. as is the case during sys_sendfile(), this can read from kernel memory. Alternatively, information can be leaked from a setuid binary that is tricked to write to the file descriptor. Therefore, forbid UHID_CREATE in these cases. No other commands in uhid_char_write() are affected by this bug and UHID_CREATE is marked as "obsolete", so apply the restriction to UHID_CREATE only rather than to uhid_char_write() entirely. Thanks to Dmitry Vyukov for adding uhid definitions to syzkaller and to Jann Horn for commit 9da3f2b7 ("x86/fault: BUG() when uaccess helpers fault on kernel addresses"), allowing this bug to be found. Reported-by: syzbot+72473edc9bf4eb1c6556@syzkaller.appspotmail.com Fixes: d365c6cf ("HID: uhid: add UHID_CREATE and UHID_DESTROY events") Cc: <stable@vger.kernel.org> # v3.6+ Cc: Jann Horn <jannh@google.com> Cc: Andy Lutomirski <luto@kernel.org> Signed-off-by:
Eric Biggers <ebiggers@google.com> Reviewed-by:
Jann Horn <jannh@google.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Hans de Goede authored
commit 2bbb5fa3 upstream. Many HP AMD based laptops contain an SMB0001 device like this: Device (SMBD) { Name (_HID, "SMB0001") // _HID: Hardware ID Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings { IO (Decode16, 0x0B20, // Range Minimum 0x0B20, // Range Maximum 0x20, // Alignment 0x20, // Length ) IRQ (Level, ActiveLow, Shared, ) {7} }) } The legacy style IRQ resource here causes acpi_dev_get_irqresource() to be called with legacy=true and this message to show in dmesg: ACPI: IRQ 7 override to edge, high This causes issues when later on the AMD0030 GPIO device gets enumerated: Device (GPIO) { Name (_HID, "AMDI0030") // _HID: Hardware ID Name (_CID, "AMDI0030") // _CID: Compatible ID Name (_UID, Zero) // _UID: Unique ID Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings { Name (RBUF, ResourceTemplate () { Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, ) { 0x00000007, } Memory32Fixed (ReadWrite, 0xFED81500, // Address Base 0x00000400, // Address Length ) }) Return (RBUF) /* \_SB_.GPIO._CRS.RBUF */ } } Now acpi_dev_get_irqresource() gets called with legacy=false, but because of the earlier override of the trigger-type acpi_register_gsi() returns -EBUSY (because we try to register the same interrupt with a different trigger-type) and we end up setting IORESOURCE_DISABLED in the flags. The setting of IORESOURCE_DISABLED causes platform_get_irq() to call acpi_irq_get() which is not implemented on x86 and returns -EINVAL. resulting in the following in dmesg: amd_gpio AMDI0030:00: Failed to get gpio IRQ: -22 amd_gpio: probe of AMDI0030:00 failed with error -22 The SMB0001 is a "virtual" device in the sense that the only way the OS interacts with it is through calling a couple of methods to do SMBus transfers. As such it is weird that it has IO and IRQ resources at all, because the driver for it is not expected to ever access the hardware directly. The Linux driver for the SMB0001 device directly binds to the acpi_device through the acpi_bus, so we do not need to instantiate a platform_device for this ACPI device. This commit adds the SMB0001 HID to the forbidden_id_list, avoiding the instantiating of a platform_device for it. Not instantiating a platform_device means we will no longer call acpi_dev_get_irqresource() for the legacy IRQ resource fixing the probe of the AMDI0030 device failing. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1644013 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198715 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199523Reported-by:
Lukas Kahnert <openproggerfreak@gmail.com> Tested-by:
Marc <suaefar@googlemail.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Gustavo A. R. Silva authored
commit fee05f45 upstream. req.gid can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: vers/misc/sgi-gru/grukdump.c:200 gru_dump_chiplet_request() warn: potential spectre issue 'gru_base' [w] Fix this by sanitizing req.gid before calling macro GID_TO_GRU, which uses it to index gru_base. Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Mattias Jacobsson authored
commit f6501f49 upstream. Add another Apple Cinema Display to the list of supported displays Signed-off-by:
Mattias Jacobsson <2pi@mok.nu> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Nathan Chancellor authored
commit 7c973012 upstream. After building the kernel with Clang, the following section mismatch warning appears: WARNING: vmlinux.o(.text+0x3bf19a6): Section mismatch in reference from the function ssc_probe() to the function .init.text:atmel_ssc_get_driver_data() The function ssc_probe() references the function __init atmel_ssc_get_driver_data(). This is often because ssc_probe lacks a __init annotation or the annotation of atmel_ssc_get_driver_data is wrong. Remove __init from atmel_ssc_get_driver_data to get rid of the mismatch. Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Emmanuel Pescosta authored
commit a7711257 upstream. Following on from this patch: https://lkml.org/lkml/2017/11/3/516, Corsair K70 LUX RGB keyboards also require the DELAY_INIT quirk to start correctly at boot. Dmesg output: usb 1-6: string descriptor 0 read error: -110 usb 1-6: New USB device found, idVendor=1b1c, idProduct=1b33 usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-6: can't set config #1, error -110 Signed-off-by:
Emmanuel Pescosta <emmanuelpescosta099@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Kai-Heng Feng authored
commit deefd242 upstream. Raydium USB touchscreen fails to set config if LPM is enabled: [ 2.030658] usb 1-8: New USB device found, idVendor=2386, idProduct=3119 [ 2.030659] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.030660] usb 1-8: Product: Raydium Touch System [ 2.030661] usb 1-8: Manufacturer: Raydium Corporation [ 7.132209] usb 1-8: can't set config #1, error -110 Same behavior can be observed on 2386:3114. Raydium claims the touchscreen supports LPM under Windows, so I used Microsoft USB Test Tools (MUTT) [1] to check its LPM status. MUTT shows that the LPM doesn't work under Windows, either. So let's just disable LPM for Raydium touchscreens. [1] https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/usb-test-toolsSigned-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Maarten Jacobs authored
commit 63529eaa upstream. The cdc-acm kernel module currently does not support the Hiro (Conexant) H05228 USB modem. The patch below adds the device specific information: idVendor 0x0572 idProduct 0x1349 Signed-off-by:
Maarten Jacobs <maarten256@outlook.com> Acked-by:
Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Dan Carpenter authored
commit 43279819 upstream. I was trying to solve a double free but I introduced a more serious NULL dereference bug. The problem is that if there is an IRQ which triggers immediately, then we need "info->uio_dev" but it's not set yet. This patch puts the original initialization back to how it was and just sets info->uio_dev to NULL on the error path so it should solve both the Oops and the double free. Fixes: f019f07e ("uio: potential double frees if __uio_register_device() fails") Reported-by:
Mathias Thore <Mathias.Thore@infinera.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Tested-by:
-
Aaro Koskinen authored
commit 82fba2df upstream. Re-enable OCTEON USB driver which is needed on older hardware (e.g. EdgeRouter Lite) for mass storage etc. This got accidentally deleted when config options were changed for OCTEON2/3 USB. Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
Paul Burton <paul.burton@mips.com> Fixes: f922bc0a ("MIPS: Octeon: cavium_octeon_defconfig: Enable more drivers") Patchwork: https://patchwork.linux-mips.org/patch/21077/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # 4.14+ Signed-off-by:
-
Sakari Ailus authored
commit 92539d3e upstream. Patch ad608fbc changed how events were subscribed to address an issue elsewhere. As a side effect of that change, the "add" callback was called before the event subscription was added to the list of subscribed events, causing the first event queued by the add callback (and possibly other events arriving soon afterwards) to be lost. Fix this by adding the subscription to the list before calling the "add" callback, and clean up afterwards if that fails. Fixes: ad608fbc ("media: v4l: event: Prevent freeing event subscriptions while accessed") Reported-by:
Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by:
Hans Verkuil <hans.verkuil@cisco.com> Tested-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Kirill A. Shutemov authored
commit a0e6e083 upstream modify_ldt(2) leaves the old LDT mapped after switching over to the new one. The old LDT gets freed and the pages can be re-used. Leaving the mapping in place can have security implications. The mapping is present in the userspace page tables and Meltdown-like attacks can read these freed and possibly reused pages. It's relatively simple to fix: unmap the old LDT and flush TLB before freeing the old LDT memory. This further allows to avoid flushing the TLB in map_ldt_struct() as the slot is unmapped and flushed by unmap_ldt_struct() or has never been mapped at all. [ tglx: Massaged changelog and removed the needless line breaks ] Fixes: f55f0501 ("x86/pti: Put the LDT in its own PGD if PTI is on") Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: bp@alien8.de Cc: hpa@zytor.com Cc: dave.hansen@linux.intel.com Cc: luto@kernel.org Cc: peterz@infradead.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Cc: bhe@redhat.com Cc: willy@infradead.org Cc: linux-mm@kvack.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20181026122856.66224-3-kirill.shutemov@linux.intel.comSigned-off-by:
-
Kirill A. Shutemov authored
commit d52888aa upstream On 5-level paging the LDT remap area is placed in the middle of the KASLR randomization region and it can overlap with the direct mapping, the vmalloc or the vmap area. The LDT mapping is per mm, so it cannot be moved into the P4D page table next to the CPU_ENTRY_AREA without complicating PGD table allocation for 5-level paging. The 4 PGD slot gap just before the direct mapping is reserved for hypervisors, so it cannot be used. Move the direct mapping one slot deeper and use the resulting gap for the LDT remap area. The resulting layout is the same for 4 and 5 level paging. [ tglx: Massaged changelog ] Fixes: f55f0501 ("x86/pti: Put the LDT in its own PGD if PTI is on") Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: bp@alien8.de Cc: hpa@zytor.com Cc: dave.hansen@linux.intel.com Cc: peterz@infradead.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Cc: bhe@redhat.com Cc: willy@infradead.org Cc: linux-mm@kvack.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20181026122856.66224-2-kirill.shutemov@linux.intel.comSigned-off-by:
-
Adrian Hunter authored
commit f6c66d73 upstream. The "Object code reading" test will not create maps for the PTI entry trampolines unless the machine environment exists to show that the arch is x86_64. Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by:
-
Adrian Hunter authored
commit 4d99e413 upstream. On x86_64 the PTI entry trampolines are not in the kernel map created by perf tools. That results in the addresses having no symbols and prevents annotation. It also causes Intel PT to have decoding errors at the trampoline addresses. Workaround that by creating maps for the trampolines. At present the kernel does not export information revealing where the trampolines are. Until that happens, the addresses are hardcoded. Signed-off-by:
-
Adrian Hunter authored
commit 9cecca32 upstream. Add a function to return the number of the machine's available CPUs. Signed-off-by:
-
Adrian Hunter authored
commit 19422a9f upstream. On x86_64, PTI entry trampolines are less than the start of kernel text, but still above 2^63. So leave kernel_start = 1ULL << 63 for x86_64. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/1526548928-20790-7-git-send-email-adrian.hunter@intel.comSigned-off-by:
-
Adrian Hunter authored
commit dbbd34a6 upstream. Add a function to identify the machine architecture. Signed-off-by:
-
Mika Westerberg authored
[ Upstream commit 5a802a7a ] After we added quirk for Lenovo Z50-70 it turns out there are at least two more systems where WDAT table includes instructions accessing RTC SRAM. Instead of quirking each system separately, look for such instructions in the table and automatically prefer iTCO_wdt if found. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199033Reported-by:
Arnold Guy <aurnoldg@gmail.com> Reported-by:
Alois Nespor <nespor@fssp.cz> Reported-by:
Yury Pakin <zxwarior@gmail.com> Reported-by:
Ihor Chyhin <ihorchyhin@ukr.net> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
YueHaibing authored
[ Upstream commit 025911a5 ] There is no need to have the '__be32 *p' variable static since new value always be assigned before use it. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Cc: stable@vger.kernel.org Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Minchan Kim authored
commit fef912bf upstream. commit 98af4d4d upstream. I got a report from Howard Chen that he saw zram and sysfs race(ie, zram block device file is created but sysfs for it isn't yet) when he tried to create new zram devices via hotadd knob. v4.20 kernel fixes it by [1, 2] but it's too large size to merge into -stable so this patch fixes the problem by registering defualt group by Greg KH's approach[3]. This patch should be applied to every stable tree [3.16+] currently existing from kernel.org because the problem was introduced at 2.6.37 by [4]. [1] fef912bf, block: genhd: add 'groups' argument to device_add_disk [2] 98af4d4d, zram: register default groups with device_add_disk() [3] http://kroah.com/log/blog/2013/06/26/how-to-create-a-sysfs-file-correctly/ [4] 33863c21, Staging: zram: Replace ioctls with sysfs interface Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Hannes Reinecke <hare@suse.com> Tested-by:
Howard Chen <howardsoc@google.com> Signed-off-by:
Minchan Kim <minchan@kernel.org> Signed-off-by:
-
