This patch started as as405 from Alan Stern.  It has been re-generated
against the current tip of the BK tree.

For quite a while we've had a bunch of state-transition testing code in the
driver, to report if anything bad ever happens (like the SCSI midlayer
trying to queue a second command before the first one finishes).  None of
those tests triggered in a very long time; this aspect of the code appears
to be extremely stable.

So this patch removes all those tests for illegal values of us->sm_state.
It turns out that sm_state was used only for one other purpose: to check
whether a command had timed out and caused a SCSI abort.  That piece of
information can easily be stored in a single new bitflag (which is called
calling US_FLIDX_TIMED_OUT) and doing so makes us->sm_state completely
unused.  Hence the patch removes it from the structure.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This is patch as399, originally from Alan Stern.

A recent change to the scsi_probe_lun() routine now allows host drivers to
specify a device's INQUIRY length in a way that cannot be overridden by
the value returned from the device.  This patch makes usb-storage set the
length to 36; now buggy devices won't be able to cause trouble by saying
that they have 37 bytes of INQUIRY data available.

The only way this value could be changed is if someone creates a SCSI
blacklist entry with the BLIST_INQUIRY_58 flag -- and no one would do that
for a USB device (I hope)!
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This was originally patch as401 from Alan Stern.  This patch makes a couple
of small changes to the new scanning thread.

It changes the name to "usb-stor-scan", which was my original intention and
makes more sense than the current name.

It also removes the PF_NOFREEZE flag; if someone suspends their system
immediately after plugging in a USB storage device then the scanning thread
should be frozen along with everything else.  The delay will be restarted
after the system wakes up.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

 Add device ID to pl2303 usb serial driver for
 1) I/O DATA USB-RSAQ3
 2) ELECOM UC-SGT
Signed-off-by: CHIKAMA Masaki <masaki-c@nict.go.jp>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Here's another unusual_devs entry for the Tekom/Yakumo devices. While I
was there I realized two of the tekom entries were out of order, so I
fixed that as well.

From: Paul Ortyl <ortylp@3miasto.net>
Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This patch for ipaq.h and ipaq.c in drivers/usb/serial/ has the
following features:

o Provides an updated table with all vendor/product IDs (except one [1])
present in Microsoft ActiveSync 3.7.1, the latest version available for
download.

o Removes #defines with vendor and product IDs from ipaq.h [2]

The table has been autogenerated from the file wceusbsh.inf (extracted
from MSASYNC.EXE with cabextract). The scripts used to generate the
table become available for download as part of the SynCE project
(http://synce.sourceforge.net).

[1] Vendor 0x45e (Microsoft) with device 0xCE is not included, because
they are used when the device is turned off but still connected to the
PC via USB. When the device is turned on, it changes vendor/product IDs
to the more specific ones.

[2] Not needed with an autogenerated device table
Signed-off-by: David Eriksson <twogood@users.sourceforge.net>
Signed-off-by: Ganesh Varadarajan <ganesh@veritas.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

generic_startup in visor.c was not called for some hardware, resulting
in attempts to access memory that had never been allocated, which in
turn caused the problem several people reported with recent (2.6.10ish)
kernels.
Signed-off-by: Roger Luethi <rl@hellgate.ch>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

The attached patch fixes a bug introduced by myself (a brown paper bag
one) when I posted the patch that introduced this same PID to the
id_table_FT232BM array only and not the id_table_combined array.
Signed-off-by: Paulo Marques <pmarques@grupopie.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

big-endian related fixes;
Signed-off-by: Petko Manolov <petkan@nucleusys.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

add some help text for touchkitusb. the howto there should also
work for mtouchusb and other touchscreens using the input layer.
Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Patch from Deepak Saxena

One of the problems I have seen with several bootloaders is
that they forget to disable network devices before jumping 
into the kernel and we end up with kernel text being overwritten
by random data before the in-kernel driver resets the devices.
This patch adds a blurb to the ARM Bootloader documentation 
reminding developers to quiesce all DMA capable devices before
executing the kernel.

Signed-off-by: Deepak Saxena
Signed-off-by: Russell King

Patch from Deepak Saxena

Patch from Lennert Buytenhek

Signed-off-by: Lennert Buytenhek

Signed-off-by: Deepak Saxena
Signed-off-by: Russell King

Patch from Deepak Saxena

Signed-off-by: Deepak Saxena
Signed-off-by: Russell King

Patch from Deepak Saxena

There seems to be a typo that has creeped into
include/asm/arch-ixp4xx/ixp4xx-regs.h. IXP4XX_EXP_CFG_BASE_VIRT and
IXP4XX_PCI_CFG_BASE_VIRT were both defined to the same value. The patch
changes PCI_CFG_BASE_VIRT to the value in the memory map comment.
  

Signed-off-by: Deepak Saxena
Signed-off-by: Russell King

Patch from Deepak Saxena

The IXP4xx PCI config cycle routines currently virtualize accesses
to device 0:0 to map to the host bridge itself. This is technically
incorrect b/c on certain boards we have an actual device wired to 0:0
and the existing code will not see these.
  

Signed-off-by: Deepak Saxena
 
Signed-off-by: Russell King

Patch from Deepak Saxena

The current timer interrupt implementation can cause time to skip
forward by ~65s and causes a 1 minute pause during bootup. The fix
for this was found during 2.4 but got lost in the 2.6 transition.
  
Details @:
  
http://lists.arm.linux.org.uk/pipermail/linux-arm-kernel/2003-September/017171.html
  

Signed-off-by: Deepak Saxena
Signed-off-by: Russell King

Patch from Ben Dooks

Fix S3C2410_GPE3, S3C2410_GPE4 and S3C2410_GPE7
pin functions, and add S3C2440 AC97 pin functions

Signed-off-by: Ben Dooks
Signed-off-by: Russell King

Patch from Ben Dooks

Fix pair of bugs in dma loading code

1) no need to error if loading onto stopped channel
2) irq code prints error if buffer done callback
   fully reloads the channel.

Signed-off-by: Ben Dooks
Signed-off-by: Russell King

Patch from Ben Dooks

Update help-text to show the new option for controlling
where the low-level debug messgaes go.

Signed-off-by: Ben Dooks
Signed-off-by: Russell King

1) Don't call security_unix_may_send() hook during sendmsg() for 
SOCK_SEQPACKET, and ensure that sendmsg() can only be called on a 
connected socket so as not to bypass the security_unix_stream_connect() 
hook.

2) Return -EINVAL if sendto() is called on SOCK_SEQPACKET with an address 
supplied.
Signed-off-by: James Morris <jmorris@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

fix printk argument type warning:
net/sctp/socket.c:2672: warning: format argument is not a pointer (arg 5)
Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

It's only purpose seems to be to break ifconfig. It often gets enabled by
default by distributors who like to set everything on, and it just confuses
people.

The functionality is available via netlink anyway - which is what anyone using
DECnet will be using for configuration.
Signed-off-by: Patrick Caulfield <patrick@tykepenguin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

into nuts.davemloft.net:/disk1/BK/net-2.6

We should not touch "self_exec_id" here. The parent changed,
not we.

Fix typo introduced during changes to use NV_ macros,
which caused screen corruption when using rivafb
Signed-off-by: Andrew Walrond <andrew@walrond.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

As noted by Linus, the burst-length "log2()" calculations were broken by
the cleanup.

This reverts to the old code.

It happens with misconfigured interrupts (and no floppy
controller).

We should probably also make floppy use the irq probing
mechanism, which handles that situation more gracefully.

The L2CAP sockets can now set LM_RELIABLE flag and get notification
when a reliability problem with the ACL connection is detected. The
Bluetooth qualification tests require this functionality.
Signed-off-by: Maxim Krasnyansky <maxk@qualcomm.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

The secure mode requests an authentication and enables the encryption
for that connection. After the successful execution of these procedures
it triggers the generation of a new link key.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

The l2cap_get_chan_by_ident() function must lock the socket with the
bh_lock_sock() function on success.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

The initial firmware loading routine for the Broadcom based chips was
written by Maxim Krasnyansky and so he also owns a copyright for this
driver.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

On Thu, 11 Nov 2004 17:10:21 +0100, Jens Axboe <axboe@suse.de> wrote:
> On Thu, Nov 11 2004, Alan Cox wrote:
> > > +   printk(KERN_WARNING "Warning: /proc/ide/hd?/settings interface is "
> > > +                       "obsolete, and will be removed soon!\n");
> > > +
> >
> > The above should be rate limited or on the write case moved to after
> > the capable() check. A program polling these settings now makes a nasty
> > noise and wipes the logs. A user can also do it intentionally.
> 
> Or just print it once...
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

The patch below does the following small cleanups in the IDE code:
- make some needlessly global code static
- remove two unused functions from pdc202xx_new.c
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

From: Srihari Vijayaraghavan <sriharivijayaraghavan@yahoo.com.au>

I have tested my RICOH CD-R/RW with this patch (on CD reading/writing),
and it works just fine with DMA enabled.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>