- 17 Apr, 2015 31 commits
-
-
Joe Perches authored
Add a test for sizeof(foo)/sizeof(foo[0]) that could be ARRAY_SIZE(foo). Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Joe Perches authored
Add another struct to the list of normally const struct types Signed-off-by:
-
Joe Perches authored
There are #defines with long string constants like: #define foo "some really long string > 80 columns" Add a long line exception for them. Miscellanea: Use the $String variable for slightly better readability Signed-off-by:
Madalin-Cristian Bucur <madalin.bucur@freescale.com> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by:
-
Joe Perches authored
Commit messages lines are sometimes overly long. Suggest line wrapping at 75 columns so the default git commit log indentation of 4 plus the commit message text still fits on an 80 column screen. Add a checkpatch test for long commit messages lines too. Signed-off-by:
-
Fabian Frederick authored
Currently checkpatch warns when asm/file.h is included and linux/file.h exists. That conversion can be made when linux/file.h includes asm/file.h which is not always the case.(See signal.h) Signed-off-by:
Fabian Frederick <fabf@skynet.be> Cc: Andy Whitcroft <apw@canonical.com> Acked-by:
-
Joe Perches authored
Using 'const <type> const *' is generally meant to be written 'const <type> * const'. Add a test for the miswritten form. Signed-off-by:
-
Joe Perches authored
Add a few conditions to the test to find return (ERRNO); Make the output message a bit less cryptic too. Signed-off-by:
-
Joe Perches authored
Currently checkpatch will fuss if one uses world writable settings in debugfs files and DEVICE_ATTR uses by testing S_IWUGO but not testing S_IWOTH, S_IRWXUGO or S_IALLUGO. Extend the check to catch all cases exporting world writable permissions including octal values. [akpm@linux-foundation.org: remove stray $] Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Joe Perches authored
If a codespell dictionary exists, use it if desired. default is off, maybe it could be turned on later. codespell's dictionary format allows multiple possible corrections, ignore that for now and only use the first suggestion. Also add \b to spelling test so that consecutive misspelled words are found properly. Signed-off-by:
-
Jani Nikula authored
References: http://mid.gmane.org/1424977312-24902-1-git-send-email-ville.syrjala@linux.intel.comSigned-off-by:
Jani Nikula <jani.nikula@intel.com> Cc: Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
Only commit log and patch additions are checked for typos and spelling errors currently. Add a check of the email subject line too. Signed-off-by:
Jani Nikula <jani.nikula@linux.intel.com> Tested-by:
-
Joe Perches authored
The "no space is necessary after a cast" sizeof exclusion doesn't work properly. The test reports a false positive for code like: BUILD_BUG_ON(sizeof(struct batadv_bla_claim_dst) != 6); Make it work, simplify the exclusions, and add some comments. Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
-
Nicolas Iooss authored
Commit 2473238e ("ihex: add support for CS:IP/EIP records") removes the "default:" statement in the switch block, making the "return usage();" line dead code and ihex2fw silently ignoring unknown options. Restore this statement. This bug was found by building with HOSTCC=clang and adding -Wunreachable-code-return to HOSTCFLAGS. Fixes: 2473238e ("ihex: add support for CS:IP/EIP records") Signed-off-by:
Nicolas Iooss <nicolas.iooss_linux@m4x.org> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
Yury Norov authored
bitmap_empty() has its own implementation. But it's clearly as simple as: find_first_bit(src, nbits) == nbits The same is true for 'bitmap_full'. Signed-off-by:
Yury Norov <yury.norov@gmail.com> Cc: George Spelvin <linux@horizon.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
-
Javi Merino authored
Now that the kernel provides DIV_ROUND_CLOSEST_ULL(), drop the internal implementation and use the kernel one. Signed-off-by:
Javi Merino <javi.merino@arm.com> Reported-by:
kbuild test robot <fengguang.wu@intel.com> Cc: Peter Rosin <peda@axentia.se> Acked-by:
Mark Brown <broonie@kernel.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Javi Merino authored
Now that the kernel provides DIV_ROUND_CLOSEST_ULL(), drop the internal implementation and use the kernel one. Signed-off-by:
Antti Palosaari <crope@iki.fi> Reviewed-by:
-
Javi Merino authored
Now that the kernel provides DIV_ROUND_CLOSEST_ULL(), drop the internal implementation and use the kernel one. Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by:
-
Javi Merino authored
Now that the kernel provides DIV_ROUND_CLOSEST_ULL(), drop the internal implementation and use the kernel one. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Javi Merino authored
We have grown a number of different implementations of DIV_ROUND_CLOSEST_ULL throughout the kernel. Move the i915 one to kernel.h so that it can be reused. Signed-off-by:
Jeff Epler <jepler@unpythonic.net> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Guenter Roeck <linux@roeck-us.net> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Alex Elder <elder@linaro.org> Cc: Antti Palosaari <crope@iki.fi> Cc: Javi Merino <javi.merino@arm.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Turquette <mturquette@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by:
-
Rasmus Villemoes authored
I hadn't had enough coffee when I wrote this. Currently, the final increment of buf depends on the value loaded from the table, and causes gcc to emit a cmov immediately before the return. It is smarter to let it depend on r, since the increment can then be computed in parallel with the final load/store pair. It also shaves 16 bytes of .text. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Tejun Heo <tj@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
-
Bartosz Golaszewski authored
Replace the loop iterating over pwm_freq_cksel0 with a call to find_closest_descending(). Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Bartosz Golaszewski authored
Replace RANGE_TO_REG() and FREQ_TO_REG() implementations with calls to find_closest(). Signed-off-by:
-
Bartosz Golaszewski authored
Use find_closest() to locate the closest average in ina226_avg_tab. Signed-off-by:
-
Bartosz Golaszewski authored
Describe proper naming convention for local variables in macros resembling functions. Signed-off-by:
-
Bartosz Golaszewski authored
This series unduplicates the code used to find the member in an array closest to 'x'. The first patch adds a macro implementing the algorithm in two flavors - for arrays sorted in ascending and descending order. The second updates Documentation/CodingStyle on the naming convention for local variables in macros resembling functions. Other three patches replace duplicated code with calls to one of these macros in some hwmon drivers. This patch (of 5): Searching for the member of an array closest to 'x' is duplicated in several places. Add a new include - util_macros.h - and two macros that implement this algorithm for arrays sorted both in ascending and descending order. Uses linear search. Signed-off-by:
-
Sebastian Ott authored
bucket_find_contain() will search the bucket list for a dma_debug_entry. When the entry isn't found it needs to search other buckets too, since only the start address of a dma range is hashed (which might be in a different bucket). A copy of the dma_debug_entry is used to get the previous hash bucket but when its list is searched the original dma_debug_entry is to be used not its modified copy. This fixes false "device driver tries to sync DMA memory it has not allocated" warnings. Signed-off-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Horia Geanta <horia.geanta@freescale.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Rasmus Villemoes authored
The most expensive part of decimal conversion is the divisions by 10 (albeit done using reciprocal multiplication with appropriately chosen constants). I decided to see if one could eliminate around half of these multiplications by emitting two digits at a time, at the cost of a 200 byte lookup table, and it does indeed seem like there is something to be gained, especially on 64 bits. Microbenchmarking shows improvements ranging from -50% (for numbers uniformly distributed in [0, 2^64-1]) to -25% (for numbers heavily biased toward the smaller end, a more realistic distribution). On a larger scale, perf shows that top, one of the big consumers of /proc data, uses 0.5-1.0% fewer cpu cycles. I had to jump through some hoops to get the 32 bit code to compile and run on my 64 bit machine, so I'm not sure how relevant these numbers are, but just for comparison the microbenchmark showed improvements between -30% and -10%. The bloat-o-meter costs are around 150 bytes (the generated code is a little smaller, so it's not the full 200 bytes) on both 32 and 64 bit. I'm aware that extra cache misses won't show up in a microbenchmark as used above, but on the other hand decimal conversions often happen in bulk (for example in the case of top). I have of course tested that the new code generates the same output as the old, for both the first and last 1e10 numbers in [0,2^64-1] and 4e9 'random' numbers in-between. Test and verification code on github: https://github.com/Villemoes/dec. Signed-off-by:
-
Yury Norov authored
This file contains implementation for all find_*_bit{,_le} So giving it more generic name looks reasonable. Signed-off-by:George Spelvin <linux@horizon.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Daniel Borkmann <dborkman@redhat.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Mark Salter <msalter@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Thomas Graf <tgraf@suug.ch> Cc: Valentin Rothberg <valentinrothberg@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Yury Norov authored
Currently all 'find_*_bit' family is located in lib/find_next_bit.c, except 'find_last_bit', which is in lib/find_last_bit.c. It seems, there's no major benefit to have it separated. Signed-off-by:
-
Yury Norov authored
This patchset does rework to find_bit function family to achieve better performance, and decrease size of text. All rework is done in patch 1. Patches 2 and 3 are about code moving and renaming. It was boot-tested on x86_64 and MIPS (big-endian) machines. Performance tests were ran on userspace with code like this: /* addr[] is filled from /dev/urandom */ start = clock(); while (ret < nbits) ret = find_next_bit(addr, nbits, ret + 1); end = clock(); printf("%ld\t", (unsigned long) end - start); On Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz measurements are: (for find_next_bit, nbits is 8M, for find_first_bit - 80K) find_next_bit: find_first_bit: new current new current 26932 43151 14777 14925 26947 43182 14521 15423 26507 43824 15053 14705 27329 43759 14473 14777 26895 43367 14847 15023 26990 43693 15103 15163 26775 43299 15067 15232 27282 42752 14544 15121 27504 43088 14644 14858 26761 43856 14699 15193 26692 43075 14781 14681 27137 42969 14451 15061 ... ... find_next_bit performance gain is 35-40%; find_first_bit - no measurable difference. On ARM machine, there is arch-specific implementation for find_bit. Thanks a lot to George Spelvin and Rasmus Villemoes for hints and helpful discussions. This patch (of 3): New implementations takes less space in source file (see diffstat) and in object. For me it's 710 vs 453 bytes of text. It also shows better performance. find_last_bit description fixed due to obvious typo. [akpm@linux-foundation.org: include linux/bitmap.h, per Rasmus] Signed-off-by: -
Richard Weinberger authored
Removal of exec domains uncovered this new warning. processor.h re-used struct pt_regs from personality.h which is now gone. ./arch/alpha/include/asm/processor.h:47:33: warning: 'struct pt_regs' declared inside parameter list [enabled by default] Signed-off-by:
Richard Weinberger <richard@nod.at> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Signed-off-by:
-
- 16 Apr, 2015 1 commit
-
-
Herbert Xu authored
Commit 9c521a20 ("crypto: api - remove instance when test failed") tried to grab a module reference count before the module was even set. Worse, it then goes on to free the module reference count after it is set so you quickly end up with a negative module reference count which prevents people from using any instances belonging to that module. This patch moves the module initialisation before the reference count. Reported-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
- 15 Apr, 2015 8 commits
-
-
Linus Torvalds authored
Merge second patchbomb from Andrew Morton: - the rest of MM - various misc bits - add ability to run /sbin/reboot at reboot time - printk/vsprintf changes - fiddle with seq_printf() return value * akpm: (114 commits) parisc: remove use of seq_printf return value lru_cache: remove use of seq_printf return value tracing: remove use of seq_printf return value cgroup: remove use of seq_printf return value proc: remove use of seq_printf return value s390: remove use of seq_printf return value cris fasttimer: remove use of seq_printf return value cris: remove use of seq_printf return value openrisc: remove use of seq_printf return value ARM: plat-pxa: remove use of seq_printf return value nios2: cpuinfo: remove use of seq_printf return value microblaze: mb: remove use of seq_printf return value ipc: remove use of seq_printf return value rtc: remove use of seq_printf return value power: wakeup: remove use of seq_printf return value x86: mtrr: if: remove use of seq_printf return value linux/bitmap.h: improve BITMAP_{LAST,FIRST}_WORD_MASK MAINTAINERS: CREDITS: remove Stefano Brivio from B43 .mailmap: add Ricardo Ribalda CREDITS: add Ricardo Ribalda Delgado ... -
Joe Perches authored
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by:
-
Joe Perches authored
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by:
-
Joe Perches authored
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Miscellanea: o Remove unused return value from trace_lookup_stack Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
-
Joe Perches authored
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Joe Perches authored
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by:
-
Joe Perches authored
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by:
-
Joe Perches authored
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Miscellanea: o Coalesce formats, realign arguments Signed-off-by:
-
