Pull drm fixes from Dave Airlie:
 "I guess the main question is are things settling down, and I'd say
  kinda, these are all pretty small fixes, nothing big stands out
  really, just seems to be quite a few of them.

  Mostly amdgpu and core fixes, with some i915, tegra, vc4, panel bits.

  core:
   - Fix potential memory leak in drm_dev_init()
   - Fix potential null-ptr-deref in drm_vblank_destroy_worker()
   - Revert hiding unregistered connectors from userspace, as it breaks
     on DP-MST
   - Add workaround for DP++ dual mode adaptors that don't support i2c
     subaddressing

  i915:
   - Fix uaf with lmem_userfault_list handling

  amdgpu:
   - gang submit fixes
   - Fix a possible memory leak in ganng submit error path
   - DP tunneling fixes
   - DCN 3.1 page flip fix
   - DCN 3.2.x fixes
   - DCN 3.1.4 fixes
   - Don't expose degamma on hardware that doesn't support it
   - BACO fixes for SMU 11.x
   - BACO fixes for SMU 13.x
   - Virtual display fix for devices with no display hardware

  amdkfd:
   - Memory limit regression fix

  tegra:
   - tegra20 GART fix

  vc4:
   - Fix error handling in vc4_atomic_commit_tail()

  lima:
   - Set lima's clkname corrrectly when regulator is missing

  panel:
   - Set bpc for logictechno panels"

* tag 'drm-fixes-2022-11-19' of git://anongit.freedesktop.org/drm/drm: (28 commits)
  gpu: host1x: Avoid trying to use GART on Tegra20
  drm/display: Don't assume dual mode adaptors support i2c sub-addressing
  drm/amd/pm: fix SMU13 runpm hang due to unintentional workaround
  drm/amd/pm: enable runpm support over BACO for SMU13.0.7
  drm/amd/pm: enable runpm support over BACO for SMU13.0.0
  drm/amdgpu: there is no vbios fb on devices with no display hw (v2)
  drm/amdkfd: Fix a memory limit issue
  drm/amdgpu: disable BACO support on more cards
  drm/amd/display: don't enable DRM CRTC degamma property for DCE
  drm/amd/display: Set max for prefetch lines on dcn32
  drm/amd/display: use uclk pstate latency for fw assisted mclk validation dcn32
  drm/amd/display: Fix prefetch calculations for dcn32
  drm/amd/display: Fix optc2_configure warning on dcn314
  drm/amd/display: Fix calculation for cursor CAB allocation
  Revert "drm: hide unregistered connectors from GETCONNECTOR IOCTL"
  drm/amd/display: Support parsing VRAM info v3.0 from VBIOS
  drm/amd/display: Fix invalid DPIA AUX reply causing system hang
  drm/amdgpu: Add psp_13_0_10_ta firmware to modinfo
  drm/amd/display: Add HUBP surface flip interrupt handler
  drm/amd/display: Fix access timeout to DPIA AUX at boot time
  ...

Pull s390 fixes from Alexander Gordeev:

 - Fix deadlock in discontiguous saved segments (DCSS) block device
   driver. When adding a disk and scanning partitions the scan would not
   break out early without a missed flag.

 - Avoid using global register variable for current_stack_pointer due to
   an old bug in gcc versions prior to gcc-8.4. Due to this bug a broken
   code is generated, which leads to stack corruptions.

* tag 's390-6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: avoid using global register for current_stack_pointer
  s390/dcssblk: fix deadlock when adding a DCSS

Merge tag 'for-6.1/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix misbehavior if list_versions DM ioctl races with module loading

 - Fix missing decrement of no_sleep_enabled if dm_bufio_client_create
   failed

 - Allow DM integrity devices to be activated in read-only mode

* tag 'for-6.1/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm integrity: clear the journal on suspend
  dm integrity: flush the journal on suspend
  dm bufio: Fix missing decrement of no_sleep_enabled if dm_bufio_client_create failed
  dm ioctl: fix misbehavior if list_versions races with module loading

drm/tegra: Fixes for v6.1-rc6

This contains a single fix that avoids using the GART on Tegra20 because
it doesn't work well with the way the Tegra DRM driver tries to use it.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118121614.3511110-1-thierry.reding@gmail.com

Pull USB driver fixes from Greg KH:
 "Here are a number of USB driver fixes and new device ids for 6.1-rc6.
  Included in here are:

   - new usb-serial device ids

   - dwc3 driver fixes for reported problems

   - cdns3 driver fixes

   - new USB device quirks

   - typec driver fixes

   - extcon USB typec driver fix

  All of these have been in linux-next with no reported issues"

* tag 'usb-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: serial: option: add u-blox LARA-L6 modem
  USB: serial: option: add u-blox LARA-R6 00B modem
  USB: serial: option: remove old LARA-R6 PID
  USB: serial: option: add Fibocom FM160 0x0111 composition
  usb: add NO_LPM quirk for Realforce 87U Keyboard
  usb: cdns3: host: fix endless superspeed hub port reset
  usb: chipidea: fix deadlock in ci_otg_del_timer
  usb: dwc3: Do not get extcon device when usb-role-switch is used
  usb: typec: tipd: Prevent uninitialized event{1,2} in IRQ handler
  usb: typec: mux: Enter safe mode only when pins need to be reconfigured
  extcon: usbc-tusb320: Call the Type-C IRQ handler only if a port is registered
  Revert "usb: dwc3: disable USB core PHY management"
  usb: dwc3: gadget: Return -ESHUTDOWN on ep disable
  USB: bcma: Make GPIO explicitly optional
  USB: serial: option: add Sierra Wireless EM9191

Pull staging driver fix from Greg KH:
 "Here is a single staging driver fix for 6.1-rc6.

  It resolves a bogus signed character test as pointed out, and fixed
  by, Jason in the rtl8192e driver

  It has been in linux-next for a few weeks now with no reported
  problems"

* tag 'staging-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: rtl8192e: remove bogus ssid character sign test

Pull tty/serial driver fixes from Greg KH:
 "Here are a number of small tty and serial driver fixes for 6.1-rc6.
  They all resolve reported problems:

   - kernel doc build problems with the -rc1 serial driver documentation
     update

   - n_gsm reported problems

   - imx serial driver missing callback

   - lots of tiny 8250 driver fixes for reported issues.

  All of these have been in linux-next for over a week with no reported
  problems"

* tag 'tty-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  docs/driver-api/miscellaneous: Remove kernel-doc of serial_core.c
  serial: 8250: Flush DMA Rx on RLSI
  serial: 8250_lpss: Use 16B DMA burst with Elkhart Lake
  serial: 8250_lpss: Configure DMA also w/o DMA filter
  serial: 8250: Fall back to non-DMA Rx if IIR_RDI occurs
  tty: n_gsm: fix sleep-in-atomic-context bug in gsm_control_send
  Revert "tty: n_gsm: replace kicktimer with delayed_work"
  Revert "tty: n_gsm: avoid call of sleeping functions from atomic context"
  serial: imx: Add missing .thaw_noirq hook
  tty: serial: fsl_lpuart: don't break the on-going transfer when global reset
  serial: 8250: omap: Flush PM QOS work on remove
  serial: 8250: omap: Fix unpaired pm_runtime_put_sync() in omap8250_remove()
  serial: 8250_omap: remove wait loop from Errata i202 workaround
  serial: 8250: omap: Fix missing PM runtime calls for omap8250_set_mctrl()
  serial: 8250: 8250_omap: Avoid RS485 RTS glitch on ->set_termios()

Pull driver core fixes from Greg KH:
 "Here are two small driver core fixes for 6.1-rc6:

   - utsname fix, this one should already be in your tree as it came
     from a different tree earlier.

   - kernfs bugfix for a much reported syzbot report that seems to keep
     getting triggered.

  Both of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  kernfs: Fix spurious lockdep warning in kernfs_find_and_get_node_by_id()
  kernel/utsname_sysctl.c: Add missing enum uts_proc value

Pull char/misc driver fixes from Greg KH:
 "Here are some small char/misc and other driver fixes for 6.1-rc6 to
  resolve some reported problems. Included in here are:

   - iio driver fixes

   - binder driver fix

   - nvmem driver fix

   - vme_vmci information leak fix

   - parport fix

   - slimbus configuration fix

   - coreboot firmware bugfix

   - speakup build fix and crash fix

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (22 commits)
  firmware: coreboot: Register bus in module init
  nvmem: u-boot-env: fix crc32_data_offset on redundant u-boot-env
  slimbus: qcom-ngd: Fix build error when CONFIG_SLIM_QCOM_NGD_CTRL=y && CONFIG_QCOM_RPROC_COMMON=m
  docs: update mediator contact information in CoC doc
  slimbus: stream: correct presence rate frequencies
  nvmem: lan9662-otp: Fix compatible string
  binder: validate alloc->mm in ->mmap() handler
  parport_pc: Avoid FIFO port location truncation
  siox: fix possible memory leak in siox_device_add()
  misc/vmw_vmci: fix an infoleak in vmci_host_do_receive_datagram()
  speakup: replace utils' u_char with unsigned char
  speakup: fix a segfault caused by switching consoles
  tools: iio: iio_generic_buffer: Fix read size
  iio: imu: bno055: uninitialized variable bug in bno055_trigger_handler()
  iio: adc: at91_adc: fix possible memory leak in at91_adc_allocate_trigger()
  iio: adc: mp2629: fix potential array out of bound access
  iio: adc: mp2629: fix wrong comparison of channel
  iio: pressure: ms5611: changed hardcoded SPI speed to value limited
  iio: pressure: ms5611: fixed value compensation bug
  iio: accel: bma400: Ensure VDDIO is enable defore reading the chip ID.
  ...

Pull sound fixes from Takashi Iwai:
 "A fair amount of commits at this time due to ASoC PR merge, but all
  look small and easy, mostly device-specific fixes spanned in various
  drivers. Hopefully this should be the last big chunk for 6.1"

* tag 'sound-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
  ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book Pro 360
  ALSA: hda/realtek: fix speakers for Samsung Galaxy Book Pro
  ALSA: usb-audio: Drop snd_BUG_ON() from snd_usbmidi_output_open()
  ASoC: stm32: dfsdm: manage cb buffers cleanup
  ASoC: sof_es8336: reduce pop noise on speaker
  ASoC: SOF: topology: No need to assign core ID if token parsing failed
  ASoC: soc-utils: Remove __exit for snd_soc_util_exit()
  ASoC: rt5677: fix legacy dai naming
  ASoC: rt5514: fix legacy dai naming
  ASoC: SOF: ipc3-topology: use old pipeline teardown flow with SOF2.1 and older
  ASoC: hda: intel-dsp-config: add ES83x6 quirk for IceLake
  ASoC: Intel: soc-acpi: add ES83x6 support to IceLake
  ASoC: tas2780: Fix set_tdm_slot in case of single slot
  ASoC: tas2764: Fix set_tdm_slot in case of single slot
  ASoC: tas2770: Fix set_tdm_slot in case of single slot
  ASoC: fsl_asrc fsl_esai fsl_sai: allow CONFIG_PM=N
  ASoC: core: Fix use-after-free in snd_soc_exit()
  MAINTAINERS: update Tzung-Bi's email address
  ASoC: Intel: bytcht_es8316: Add quirk for the Nanote UMPC-01
  ASoC: amd: yc: Add Alienware m17 R5 AMD into DMI table
  ...

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Fixup VDD/VMMC voltage-range negotiation

  MMC host:
   - sdhci-pci: Fix memory leak by adding a missing pci_dev_put()
   - sdhci-pci-o2micro: Fix card detect by tuning the debounce timeout"

* tag 'mmc-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-pci: Fix possible memory leak caused by missing pci_dev_put()
  mmc: sdhci-pci-o2micro: fix card detect fail issue caused by CD# debounce timeout
  mmc: core: properly select voltage range without power cycle

There was a problem that a user burned a dm-integrity image on CDROM
and could not activate it because it had a non-empty journal.

Fix this problem by flushing the journal (done by the previous commit)
and clearing the journal (done by this commit). Once the journal is
cleared, dm-integrity won't attempt to replay it on the next
activation.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

This commit flushes the journal on suspend. It is prerequisite for the
next commit that enables activating dm integrity devices in read-only mode.

Note that we deliberately didn't flush the journal on suspend, so that the
journal replay code would be tested. However, the dm-integrity code is 5
years old now, so that journal replay is well-tested, and we can make this
change now.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

The 'no_sleep_enabled' should be decreased in error handling path
in dm_bufio_client_create() when the DM_BUFIO_CLIENT_NO_SLEEP flag
is set, otherwise static_branch_unlikely() will always return true
even if no dm_bufio_client instances have DM_BUFIO_CLIENT_NO_SLEEP
flag set.

Cc: stable@vger.kernel.org
Fixes: 3c1c875d ("dm bufio: conditionally enable branching for DM_BUFIO_CLIENT_NO_SLEEP")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

__list_versions will first estimate the required space using the
"dm_target_iterate(list_version_get_needed, &needed)" call and then will
fill the space using the "dm_target_iterate(list_version_get_info,
&iter_info)" call. Each of these calls locks the targets using the
"down_read(&_lock)" and "up_read(&_lock)" calls, however between the first
and second "dm_target_iterate" there is no lock held and the target
modules can be loaded at this point, so the second "dm_target_iterate"
call may need more space than what was the first "dm_target_iterate"
returned.

The code tries to handle this overflow (see the beginning of
list_version_get_info), however this handling is incorrect.

The code sets "param->data_size = param->data_start + needed" and
"iter_info.end = (char *)vers+len" - "needed" is the size returned by the
first dm_target_iterate call; "len" is the size of the buffer allocated by
userspace.

"len" may be greater than "needed"; in this case, the code will write up
to "len" bytes into the buffer, however param->data_size is set to
"needed", so it may write data past the param->data_size value. The ioctl
interface copies only up to param->data_size into userspace, thus part of
the result will be truncated.

Fix this bug by setting "iter_info.end = (char *)vers + needed;" - this
guarantees that the second "dm_target_iterate" call will write only up to
the "needed" buffer and it will exit with "DM_BUFFER_FULL_FLAG" if it
overflows the "needed" space - in this case, userspace will allocate a
larger buffer and retry.

Note that there is also a bug in list_version_get_needed - we need to add
"strlen(tt->name) + 1" to the needed size, not "strlen(tt->name)".

Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

Since commit c7e3ca51 ("iommu/tegra: gart: Do not register with
bus") quite some time ago, the GART driver has effectively disabled
itself to avoid issues with the GPU driver expecting it to work in ways
that it doesn't. As of commit 57365a04 ("iommu: Move bus setup to
IOMMU device registration") that bodge no longer works, but really the
GPU driver should be responsible for its own behaviour anyway. Make the
workaround explicit.
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Suggested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Merge tag 'amd-drm-fixes-6.1-2022-11-16' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.1-2022-11-16:

amdgpu:
- Fix a possible memory leak in ganng submit error path
- DP tunneling fixes
- DCN 3.1 page flip fix
- DCN 3.2.x fixes
- DCN 3.1.4 fixes
- Don't expose degamma on hardware that doesn't support it
- BACO fixes for SMU 11.x
- BACO fixes for SMU 13.x
- Virtual display fix for devices with no display hardware

amdkfd:
- Memory limit regression fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221117040416.6100-1-alexander.deucher@amd.com

Merge tag 'drm-intel-fixes-2022-11-17' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Fix uaf with lmem_userfault_list handling (Matthew Auld)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y3X2bNJ/4GR1BAiG@tursulin-desk

Pull ARM SoC fixes from Arnd Bergmann:
 "Another set of devicetree and code changes for SoC platforms, notably:

   - DT schema warning fixes for i.MX

   - Functional fixes for i.MX tqma8mqml-mba8mx USB and i.MX8M OCOTP

   - MAINTAINERS updates for Hisilicon and RISC-V, documenting which
     RISC-V SoC specific patches will now get merged through the SoC
     tree in the future.

   - A code fix for at91 suspend, to work around broken hardware

   - A devicetree fix for lan966x/pcb8291 LED support

   - Lots of DT fixes for Qualcomm SoCs, mostly fixing minor problems
     like incorrect register sizes and schema warnings. One fix makes
     the UFS controller work on sc8280xp, and six fixes address the same
     regulator problem in a variety of platforms"

* tag 'soc-fixes-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits)
  MAINTAINERS: repair Microchip corei2c driver entry
  MAINTAINERS: add an entry for StarFive devicetrees
  MAINTAINERS: generify the Microchip RISC-V entry name
  MAINTAINERS: add entries for misc. RISC-V SoC drivers and devicetrees
  MAINTAINERS: git://github.com -> https://github.com for HiSilicon
  soc: imx8m: Enable OCOTP clock before reading the register
  arm64: dts: imx93-pinfunc: drop execution permission
  arm64: dts: imx8mn: Fix NAND controller size-cells
  arm64: dts: imx8mm: Fix NAND controller size-cells
  ARM: dts: imx7: Fix NAND controller size-cells
  arm64: dts: imx8mm-tqma8mqml-mba8mx: Fix USB DR
  ARM: at91: pm: avoid soft resetting AC DLL
  ARM: dts: lan966x: Enable sgpio on pcb8291
  arm64: dts: qcom: sm8250: Disable the not yet supported cluster idle state
  ARM: dts: at91: sama7g5: fix signal name of pin PB2
  arm64: dts: qcom: sc7280: Add the reset reg for lpass audiocc on SC7280
  arm64: dts: qcom: sc8280xp: fix UFS PHY serdes size
  arm64: dts: qcom: sc8280xp: drop broken DP PHY nodes
  arm64: dts: qcom: sc8280xp: fix USB PHY PCS registers
  arm64: dts: qcom: sc8280xp: fix USB1 PHY RX1 registers
  ...

Pull ceph fixes from Ilya Dryomov:
 "Three filesystem bug fixes, intended for stable"

* tag 'ceph-for-6.1-rc6' of https://github.com/ceph/ceph-client:
  ceph: fix NULL pointer dereference for req->r_session
  ceph: avoid putting the realm twice when decoding snaps fails
  ceph: fix a NULL vs IS_ERR() check when calling ceph_lookup_inode()
  MAINTAINERS: git://github.com -> https://github.com for ceph

drm-misc-fixes for v6.1-rc6:
- Fix error handling in vc4_atomic_commit_tail()
- Set bpc for logictechno panels.
- Fix potential memory leak in drm_dev_init()
- Fix potential null-ptr-deref in drm_vblank_destroy_worker()
- Set lima's clkname corrrectly when regulator is missing.
- Small amdgpu fix to gang submission.
- Revert hiding unregistered connectors from userspace, as it breaks on DP-MST.
- Add workaround for DP++ dual mode adaptors that don't support
  i2c subaddressing.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c7d02936-c550-199b-6cb7-cbf6cf104e4a@linux.intel.com

Merge tag 'usb-serial-6.1-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus

Johan writes:
  "USB-serial fixes for 6.1-rc6

   Here are some new modem device ids for 6.1.

   All have been in linux-next with no reported issues."

* tag 'usb-serial-6.1-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
  USB: serial: option: add u-blox LARA-L6 modem
  USB: serial: option: add u-blox LARA-R6 00B modem
  USB: serial: option: remove old LARA-R6 PID
  USB: serial: option: add Fibocom FM160 0x0111 composition
  USB: serial: option: add Sierra Wireless EM9191

Pull nfsd fix from Chuck Lever:

 - Fix another tracepoint crash

* tag 'nfsd-6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  NFSD: Fix trace_nfsd_fh_verify_err() crasher

Pull networking fixes from Paolo Abeni:
 "Including fixes from bpf.

  Current release - regressions:

   - tls: fix memory leak in tls_enc_skb() and tls_sw_fallback_init()

  Previous releases - regressions:

   - bridge: fix memory leaks when changing VLAN protocol

   - dsa: make dsa_master_ioctl() see through port_hwtstamp_get() shims

   - dsa: don't leak tagger-owned storage on switch driver unbind

   - eth: mlxsw: avoid warnings when not offloaded FDB entry with IPv6
     is removed

   - eth: stmmac: ensure tx function is not running in
     stmmac_xdp_release()

   - eth: hns3: fix return value check bug of rx copybreak

  Previous releases - always broken:

   - kcm: close race conditions on sk_receive_queue

   - bpf: fix alignment problem in bpf_prog_test_run_skb()

   - bpf: fix writing offset in case of fault in
     strncpy_from_kernel_nofault

   - eth: macvlan: use built-in RCU list checking

   - eth: marvell: add sleep time after enabling the loopback bit

   - eth: octeon_ep: fix potential memory leak in octep_device_setup()

  Misc:

   - tcp: configurable source port perturb table size

   - bpf: Convert BPF_DISPATCHER to use static_call() (not ftrace)"

* tag 'net-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits)
  net: use struct_group to copy ip/ipv6 header addresses
  net: usb: smsc95xx: fix external PHY reset
  net: usb: qmi_wwan: add Telit 0x103a composition
  netdevsim: Fix memory leak of nsim_dev->fa_cookie
  tcp: configurable source port perturb table size
  l2tp: Serialize access to sk_user_data with sk_callback_lock
  net: thunderbolt: Fix error handling in tbnet_init()
  net: microchip: sparx5: Fix potential null-ptr-deref in sparx_stats_init() and sparx5_start()
  net: lan966x: Fix potential null-ptr-deref in lan966x_stats_init()
  net: dsa: don't leak tagger-owned storage on switch driver unbind
  net/x25: Fix skb leak in x25_lapb_receive_frame()
  net: ag71xx: call phylink_disconnect_phy if ag71xx_hw_enable() fail in ag71xx_open()
  bridge: switchdev: Fix memory leaks when changing VLAN protocol
  net: hns3: fix setting incorrect phy link ksettings for firmware in resetting process
  net: hns3: fix return value check bug of rx copybreak
  net: hns3: fix incorrect hw rss hash type of rx packet
  net: phy: marvell: add sleep time after enabling the loopback bit
  net: ena: Fix error handling in ena_init()
  kcm: close race conditions on sk_receive_queue
  net: ionic: Fix error handling in ionic_init_module()
  ...

kernel test robot reported warnings when build bonding module with
make W=1 O=build_dir ARCH=x86_64 SHELL=/bin/bash drivers/net/bonding/:

                 from ../drivers/net/bonding/bond_main.c:35:
In function ‘fortify_memcpy_chk’,
    inlined from ‘iph_to_flow_copy_v4addrs’ at ../include/net/ip.h:566:2,
    inlined from ‘bond_flow_ip’ at ../drivers/net/bonding/bond_main.c:3984:3:
../include/linux/fortify-string.h:413:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of f
ield (2nd parameter); maybe use struct_group()? [-Wattribute-warning]
  413 |                         __read_overflow2_field(q_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘fortify_memcpy_chk’,
    inlined from ‘iph_to_flow_copy_v6addrs’ at ../include/net/ipv6.h:900:2,
    inlined from ‘bond_flow_ip’ at ../drivers/net/bonding/bond_main.c:3994:3:
../include/linux/fortify-string.h:413:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of f
ield (2nd parameter); maybe use struct_group()? [-Wattribute-warning]
  413 |                         __read_overflow2_field(q_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This is because we try to copy the whole ip/ip6 address to the flow_key,
while we only point the to ip/ip6 saddr. Note that since these are UAPI
headers, __struct_group() is used to avoid the compiler warnings.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: c3f83241 ("net: Add full IPv6 addresses to flow_keys")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20221115142400.1204786-1-liuhangbin@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

An external PHY needs settling time after power up or reset.
In the bind() function an mdio bus is registered. If at this point
the external PHY is still initialising, no valid PHY ID will be
read and on phy_find_first() the bind() function will fail.

If an external PHY is present, wait the maximum time specified
in 802.3 45.2.7.1.1.

Fixes: 05b35e7e ("smsc95xx: add phylib support")
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221115114434.9991-2-alexandru.tachici@analog.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Add the following Telit LE910C4-WWX composition:

0x103a: rmnet
Signed-off-by: Enrico Sau <enrico.sau@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20221115105859.14324-1-enrico.sau@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Merge tag 'imx-fixes-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 6.1, 2nd round:

- Switch to usb-role-switch for fixing USB device mode on
  tqma8mqml-mba8mx board, so that Dual Role is fully functional.
- A series from Marek Vasut to fix dt-schema warning caused by NAND
  controller size-cells.
- Fix file permission of imx93-pinfunc header.
- Enable OCOTP clock in soc-imx8m driver to fix a kexec kernel hang
  issue.

* tag 'imx-fixes-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  soc: imx8m: Enable OCOTP clock before reading the register
  arm64: dts: imx93-pinfunc: drop execution permission
  arm64: dts: imx8mn: Fix NAND controller size-cells
  arm64: dts: imx8mm: Fix NAND controller size-cells
  ARM: dts: imx7: Fix NAND controller size-cells
  arm64: dts: imx8mm-tqma8mqml-mba8mx: Fix USB DR

Link: https://lore.kernel.org/r/20221116090402.GA1274@T480Signed-off-by: Arnd Bergmann <arnd@arndb.de>

MAINTAINERS file updates for HiSilicon sections

- Use https instead of git for the git trees listed

* tag 'hisi-maintainer-fix' of https://github.com/hisilicon/linux-hisi:
  MAINTAINERS: git://github.com -> https://github.com for HiSilicon

Link: https://lore.kernel.org/r/63744BAB.5020307@hisilicon.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

kmemleak reports this issue:

unreferenced object 0xffff8881bac872d0 (size 8):
  comm "sh", pid 58603, jiffies 4481524462 (age 68.065s)
  hex dump (first 8 bytes):
    04 00 00 00 de ad be ef                          ........
  backtrace:
    [<00000000c80b8577>] __kmalloc+0x49/0x150
    [<000000005292b8c6>] nsim_dev_trap_fa_cookie_write+0xc1/0x210 [netdevsim]
    [<0000000093d78e77>] full_proxy_write+0xf3/0x180
    [<000000005a662c16>] vfs_write+0x1c5/0xaf0
    [<000000007aabf84a>] ksys_write+0xed/0x1c0
    [<000000005f1d2e47>] do_syscall_64+0x3b/0x90
    [<000000006001c6ec>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

The issue occurs in the following scenarios:

nsim_dev_trap_fa_cookie_write()
  kmalloc() fa_cookie
  nsim_dev->fa_cookie = fa_cookie
..
nsim_drv_remove()

The fa_cookie allocked in nsim_dev_trap_fa_cookie_write() is not freed. To
fix, add kfree(nsim_dev->fa_cookie) to nsim_drv_remove().

Fixes: d3cbb907 ("netdevsim: add ACL trap reporting cookie as a metadata")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Link: https://lore.kernel.org/r/1668504625-14698-1-git-send-email-wangyufen@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull xen fixes from Juergen Gross:
 "Two trivial cleanups, and three simple fixes"

* tag 'for-linus-6.1-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/platform-pci: use define instead of literal number
  xen/platform-pci: add missing free_irq() in error path
  xen-pciback: Allow setting PCI_MSIX_FLAGS_MASKALL too
  xen/pcpu: fix possible memory leak in register_pcpu()
  x86/xen: Use kstrtobool() instead of strtobool()

Pull pin control fixes from Linus Walleij:
 "Aere is a hopefully final round of pin control fixes. Nothing special,
  driver fixes and we caught a potential NULL pointer exception.

   - Fix a potential NULL dereference in the core!

   - Fix all pin mux routes in the Rockchop PX30 driver

   - Fix the UFS pins in the Qualcomm SC8280XP driver

   - Fix bias disabling in the Mediatek driver

   - Fix debounce time settings in the Mediatek driver"

* tag 'pinctrl-v6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: mediatek: Export debounce time tables
  pinctrl: mediatek: Fix EINT pins input debounce time configuration
  pinctrl: devicetree: fix null pointer dereferencing in pinctrl_dt_to_map
  pinctrl: mediatek: common-v2: Fix bias-disable for PULL_PU_PD_RSEL_TYPE
  pinctrl: qcom: sc8280xp: Rectify UFS reset pins
  pinctrl: rockchip: list all pins in a possible mux route for PX30

Merge tag 'platform-drivers-x86-v6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:

 - Surface Pro 9 and Surface Laptop 5 kbd, battery, etc support (this
   is just a few hw-id additions)

 - A couple of other hw-id / DMI-quirk additions

 - A few small bug fixes + 1 build fix

* tag 'platform-drivers-x86-v6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: ideapad-laptop: Add module parameters to match DMI quirk tables
  platform/x86: ideapad-laptop: Fix interrupt storm on fn-lock toggle on some Yoga laptops
  platform/x86: hp-wmi: Ignore Smart Experience App event
  platform/surface: aggregator_registry: Add support for Surface Laptop 5
  platform/surface: aggregator_registry: Add support for Surface Pro 9
  platform/surface: aggregator: Do not check for repeated unsequenced packets
  platform/x86: acer-wmi: Enable SW_TABLET_MODE on Switch V 10 (SW5-017)
  platform/x86: asus-wmi: add missing pci_dev_put() in asus_wmi_set_xusb2pr()
  platform/x86/intel: pmc: Don't unconditionally attach Intel PMC when virtualized
  platform/x86: thinkpad_acpi: Enable s2idle quirk for 21A1 machine type
  platform/x86/amd: pmc: Add new ACPI ID AMDI0009
  platform/x86/amd: pmc: Remove more CONFIG_DEBUG_FS checks

Add LARA-L6 PIDs for three different USB compositions.

LARA-L6 module can be configured (by AT interface) in three different
USB modes:
* Default mode (Vendor ID: 0x1546 Product ID: 0x1341) with 4 serial
interfaces
* RmNet mode (Vendor ID: 0x1546 Product ID: 0x1342) with 4 serial
interfaces and 1 RmNet virtual network interface
* CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1343) with 4 serial
interface and 1 CDC-ECM virtual network interface

In default mode LARA-L6 exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parser/alternative functions

In RmNet mode LARA-L6 exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parset/alternative functions
If 4: RMNET interface

In CDC-ECM mode LARA-L6 exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parset/alternative functions
If 4: CDC-ECM interface
Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com>
[ johan: drop PID defines in favour of comments ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>

The official LARA-R6 (00B) modem uses 0x908b PID. LARA-R6 00B does not
implement a QMI interface on port 4, the reservation (RSVD(4)) has been
added to meet other companies that implement QMI on that interface.

LARA-R6 00B USB composition exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parser/alternative functions
Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>

Remove the UBLOX_PRODUCT_R6XX 0x90fa association since LARA-R6 00B final
product uses a new USB composition with different PID. 0x90fa PID used
only by LARA-R6 internal prototypes.

Move 0x90fa PID directly in the option_ids array since used by other
Qualcomm based modem vendors as pointed out in:

  https://lore.kernel.org/all/6572c4e6-d8bc-b8d3-4396-d879e4e76338@gmail.comSigned-off-by: Davide Tronchin <davide.tronchin.94@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>

pci_get_device() will increase the reference count for the returned
pci_dev. We need to use pci_dev_put() to decrease the reference count
before amd_probe() returns. There is no problem for the 'smbus_dev ==
NULL' branch because pci_dev_put() can also handle the NULL input
parameter case.

Fixes: 659c9bc1 ("mmc: sdhci-pci: Build o2micro support in the same module")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221114083100.149200-1-wangxiongfeng2@huawei.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

On embedded systems with little memory and no relevant
security concerns, it is beneficial to reduce the size
of the table.

Reducing the size from 2^16 to 2^8 saves 255 KiB
of kernel RAM.

Makes the table size configurable as an expert option.

The size was previously increased from 2^8 to 2^16
in commit 4c2c8f03 ("tcp: increase source port perturb table to
2^16").
Signed-off-by: Gleb Mazovetskiy <glex.spb@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The SD card is recognized failed sometimes when resume from suspend.
Because CD# debounce time too long then card present report wrong.
Finally, card is recognized failed.
Signed-off-by: Chevron Li <chevron.li@bayhubtech.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221104095512.4068-1-chevron.li@bayhubtech.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

In mmc_select_voltage(), if there is no full power cycle, the voltage
range selected at the end of the function will be on a single range
(e.g. 3.3V/3.4V). To keep a range around the selected voltage (3.2V/3.4V),
the mask shift should be reduced by 1.

This issue was triggered by using a specific SD-card (Verbatim Premium
16GB UHS-1) on an STM32MP157C-DK2 board. This board cannot do UHS modes
and there is no power cycle. And the card was failing to switch to
high-speed mode. When adding the range 3.2V/3.3V for this card with the
proposed shift change, the card can switch to high-speed mode.

Fixes: ce69d37b ("mmc: core: Prevent violation of specs while initializing cards")
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221028073740.7259-1-yann.gautier@foss.st.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>