- 09 Dec, 2020 4 commits
-
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by replacing a /* fall through */ comment with the new pseudo-keyword macro fallthrough; instead of letting the code fall through to the next case. Notice that Clang doesn't recognize /* fall through */ comments as implicit fall-through markings. Link: https://github.com/KSPP/linux/issues/115Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/f932c887e013767cbdabfdddd671086e8ae63193.1605896060.git.gustavoars@kernel.org
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/04257418814755f081fa0ac14a61b01328cdc4ed.1605896059.git.gustavoars@kernel.org
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/e127232621c4de340509047a11d98093958303c5.1605896059.git.gustavoars@kernel.org
-
Anilkumar Kolli authored
QMI sequence fails if caldata file is not available. It is observed that 'rmmod ath11k' fails if qmi message fails. With this patch rmmod/insmod is working. Logs: Direct firmware load for IPQ8074/caldata.bin failed with error -2 Falling back to user helper qmi failed to load CAL: IPQ8074/caldata.bin qmi failed to load board data file:-11 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1 Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01699-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1606916215-24643-1-git-send-email-akolli@codeaurora.org
-
- 08 Dec, 2020 2 commits
-
-
Tom Rix authored
The macro use will already have a semicolon. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201127175531.2754461-1-trix@redhat.com
-
Devin Bayer authored
I am trying to get the ath11k driver to work with VyOS and during the build it tries to discover the firmware blobs which drivers require. This doesn't work with ath11k because it doesn't use the MODULE_FIRMWARE macro. This patch fixes that. Signed-off-by: Devin Bayer <dev@doubly.so> [kvalo@codeaurora.org: cleanup commit log, move to pci.c] Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201202182705.dhkml4nb4rf2vwav@orac
-
- 07 Dec, 2020 12 commits
-
-
Tom Rix authored
The macro use will already have a semicolon. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201127175336.2752730-1-trix@redhat.com
-
Seevalamuthu Mariappan authored
Incase of hardware encryption, WMI_PEER_AUTH flag will be set by firmware during install key. Since install key wont be done for software encryption mode, firmware will not set this flag. Due to this, seeing traffic failure in software encryption. Hence, avoid resetting peer auth flag if hardware encryption disabled. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01421-QCAHKSWPL_SILICONZ-1 Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1606369414-25211-1-git-send-email-seevalam@codeaurora.org
-
Anilkumar Kolli authored
In QCN9074 ath11k boot, firmware crash is observed in 64-bit builds and is due to wrong 64 bit MSI address size. This patch fixes the firmware crash. Read msi high addr if 64-bit addresses allowed on MSI. Tested-On: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r1-00026-QCAHKSWPL_SILICONZ-2 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1606199334-18206-1-git-send-email-akolli@codeaurora.org
-
Wen Gong authored
cppcheck possible warnings: (new ones prefixed by >>, may not real problems) drivers/net/wireless/ath/ath10k/sdio.c:2234:2: warning: Non-boolean value returned from function returning bool [returnNonBoolInBooleanFunction] return param & HI_OPTION_SDIO_CRASH_DUMP_ENHANCEMENT_FW; Reported-by: kernel test robot <rong.a.chen@intel.com> Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1606103240-9868-1-git-send-email-wgong@codeaurora.org
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Misc updates This patchset contains miscellaneous patches we gathered in our queue. Some of them are dependencies of larger patchsets that I will submit later this cycle. Patches #1-#3 perform small non-functional changes in mlxsw. Patch #4 adds more extended ack messages in mlxsw. Patch #5 adds devlink parameters documentation for mlxsw. To be extended with more parameters this cycle. Patches #6-#7 perform small changes in forwarding selftests infrastructure. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Turned out that mlxsw_sp_ipip_fib_entry_op_gre4() does not need to figure out the IP address and virtual router id. Those are exactly the same as in the fib_entry it is called for. So just use that and reduce mlxsw_sp_ipip_fib_entry_op_gre4() function to only call mlxsw_sp_ipip_fib_entry_op_gre4_rtdp() make the ipip decap op code similar to nve. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Machata authored
The indicated version fixes an issue whereby the MOMTE register would by default enable mirroring of ECN-marked traffic from all traffic classes, once the ECN mirroring was configured. This fix is necessary for offload of RED "ecn_mark" qevent. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Suppresses the following coccinelle warning: drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_keys.c:139:3-7: WARNING use flexible-array member instead Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Suppresses the following coccinelle warning: drivers/net/ethernet/mellanox/mlxsw/spectrum_mr.c:18:15-19: WARNING use flexible-array member instead Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Currently, mlxsw triggers the 'devlink:devlink_hwmsg' tracepoint whenever a request is sent to the device and whenever a response is received from it. However, the tracepoint is not triggered when an event (e.g., port up / down) is received from the device. Also trace EMAD events in order to log a more complete picture of all the exchanged hardware messages. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Test that the reference count of a router interface (RIF) configured for a LAG is incremented / decremented when ports join / leave the LAG. Use the offload indication on routes configured on the RIF to understand if it was created / destroyed. The test fails without the previous patch. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
In case a router interface (RIF) is configured for a LAG, make sure its configuration is applied on the new LAG member. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 06 Dec, 2020 3 commits
-
-
David S. Miller authored
Heiner Kallweit says: ==================== r8169: improve rtl_rx and NUM_RX_DESC handling This series improves rtl_rx() and the handling of NUM_RX_DESC. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
After recent changes there's no need any longer to define NUM_RX_DESC as an unsigned value. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
There's no need to check min(budget, NUM_RX_DESC). At first budget (NAPI_POLL_WEIGHT = 64) is less then NUM_RX_DESC (256). And more important: Even in case of budget > NUM_RX_DESC we could safely continue processing descriptors as long as they are owned by the CPU. In addition replace rx_left with a normal counter variable, this allows to simplify the code. Last but not least there's no need any longer to pass the budget as an u32. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 05 Dec, 2020 9 commits
-
-
Colin Ian King authored
There is a spelling mistake in the Kconfig help text. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201204194549.1153063-1-colin.king@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.open-mesh.org/linux-mergeJakub Kicinski authored
Simon Wunderlich says: ==================== This cleanup patchset includes the following patches: - bump version strings, by Simon Wunderlich - update include for min/max helpers, by Sven Eckelmann - add infrastructure and netlink functions for routing algo selection, by Sven Eckelmann (2 patches) - drop deprecated debugfs and sysfs support and obsoleted functionality, by Sven Eckelmann (3 patches) - drop unused include in fragmentation.c, by Simon Wunderlich * tag 'batadv-next-pullrequest-20201204' of git://git.open-mesh.org/linux-merge: batman-adv: Drop unused soft-interface.h include in fragmentation.c batman-adv: Drop legacy code for auto deleting mesh interfaces batman-adv: Drop deprecated debugfs support batman-adv: Drop deprecated sysfs support batman-adv: Allow selection of routing algorithm over rtnetlink batman-adv: Prepare infrastructure for newlink settings batman-adv: Add new include for min/max helpers batman-adv: Start new development cycle ==================== Link: https://lore.kernel.org/r/20201204154631.21063-1-sw@simonwunderlich.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Arnd Bergmann authored
When CONFIG_OF is disabled, there is a harmless warning about an unused variable: enetc_pf.c: In function 'enetc_phylink_create': enetc_pf.c:981:17: error: unused variable 'dev' [-Werror=unused-variable] Slightly rearrange the code to pass around the of_node as a function argument, which avoids the problem without hurting readability. Fixes: 71b77a7a ("enetc: Migrate to PHYLINK and PCS_LYNX") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20201204120800.17193-1-claudiu.manoil@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jonathan Lemon authored
The OpenCompute time card is an atomic clock along with a GPS receiver that provides a Grandmaster clock source for a PTP enabled network. More information is available at http://www.timingcard.com/Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20201204035128.2219252-2-jonathan.lemon@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Bongsu Jeon authored
implement the NCI 2.x initial sequence to support NCI 2.x NFCC. Since NCI 2.0, CORE_RESET and CORE_INIT sequence have been changed. If NFCEE supports NCI 2.x, then NCI 2.x initial sequence will work. In NCI 1.0, Initial sequence and payloads are as below: (DH) (NFCC) | -- CORE_RESET_CMD --> | | <-- CORE_RESET_RSP -- | | -- CORE_INIT_CMD --> | | <-- CORE_INIT_RSP -- | CORE_RESET_RSP payloads are Status, NCI version, Configuration Status. CORE_INIT_CMD payloads are empty. CORE_INIT_RSP payloads are Status, NFCC Features, Number of Supported RF Interfaces, Supported RF Interface, Max Logical Connections, Max Routing table Size, Max Control Packet Payload Size, Max Size for Large Parameters, Manufacturer ID, Manufacturer Specific Information. In NCI 2.0, Initial Sequence and Parameters are as below: (DH) (NFCC) | -- CORE_RESET_CMD --> | | <-- CORE_RESET_RSP -- | | <-- CORE_RESET_NTF -- | | -- CORE_INIT_CMD --> | | <-- CORE_INIT_RSP -- | CORE_RESET_RSP payloads are Status. CORE_RESET_NTF payloads are Reset Trigger, Configuration Status, NCI Version, Manufacturer ID, Manufacturer Specific Information Length, Manufacturer Specific Information. CORE_INIT_CMD payloads are Feature1, Feature2. CORE_INIT_RSP payloads are Status, NFCC Features, Max Logical Connections, Max Routing Table Size, Max Control Packet Payload Size, Max Data Packet Payload Size of the Static HCI Connection, Number of Credits of the Static HCI Connection, Max NFC-V RF Frame Size, Number of Supported RF Interfaces, Supported RF Interfaces. Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com> Link: https://lore.kernel.org/r/20201202223147.3472-1-bongsu.jeon@samsung.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Guillaume Nault authored
Connect hosts H1 and H2 using two intermediate encapsulation routers (LER1 and LER2). These routers encapsulate traffic from the hosts, including the original Ethernet header, into MPLS. Use ping to test reachability between H1 and H2. Signed-off-by: Guillaume Nault <gnault@redhat.com> Link: https://lore.kernel.org/r/625f5c1aafa3a8085f8d3e082d680a82e16ffbaa.1606918980.git.gnault@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Tom Rix authored
The macro use will already have a semicolon. Clean up escaped newlines. Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20201202163622.3733506-1-trix@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Hoang Le authored
We add the support to remove a specific node down with 128bit node identifier, as an alternative to legacy 32-bit node address. example: $tipc peer remove identiy <1001002|16777777> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Link: https://lore.kernel.org/r/20201203035045.4564-1-hoang.h.le@dektech.com.auSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Simon Horman authored
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use "flexible array members"[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9/process/deprecated.html#zero-length-and-one-element-arrays Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Louis Peens <louis.peens@netronome.com> Link: https://lore.kernel.org/r/20201204125601.24876-1-simon.horman@netronome.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 04 Dec, 2020 10 commits
-
-
Bongsu Jeon authored
If there isn't a proper NFC firmware image, Bootloader mode will be skipped. Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201203225257.2446-1-bongsu.jeon@samsung.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Arjun Roy says: ==================== Perf. optimizations for TCP Recv. Zerocopy This patchset contains several optimizations for TCP Recv. Zerocopy. Summarized: 1. It is possible that a read payload is not exactly page aligned - that there may exist "straggler" bytes that we cannot map into the caller's address space cleanly. For this, we allow the caller to provide as argument a "hybrid copy buffer", turning getsockopt(TCP_ZEROCOPY_RECEIVE) into a "hybrid" operation that allows the caller to avoid a subsequent recvmsg() call to read the stragglers. 2. Similarly, for "small" read payloads that are either below the size of a page, or small enough that remapping pages is not a performance win - we allow the user to short-circuit the remapping operations entirely and simply copy into the buffer provided. Some of the patches in the middle of this set are refactors to support this "short-circuiting" optimization. 3. We allow the user to provide a hint that performing a page zap operation (and the accompanying TLB shootdown) may not be necessary, for the provided region that the kernel will attempt to map pages into. This allows us to avoid this expensive operation while holding the socket lock, which provides a significant performance advantage. With all of these changes combined, "medium" sized receive traffic (multiple tens to few hundreds of KB) see significant efficiency gains when using TCP receive zerocopy instead of regular recvmsg(). For example, with RPC-style traffic with 32KB messages, there is a roughly 15% efficiency improvement when using zerocopy. Without these changes, there is a roughly 60-70% efficiency reduction with such messages when employing zerocopy. ==================== Link: https://lore.kernel.org/r/20201202225349.935284-1-arjunroy.kdev@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Arjun Roy authored
Zapping pages is required only if we are calling vm_insert_page into a region where pages had previously been mapped. Receive zerocopy allows reusing such regions, and hitherto called zap_page_range() before calling vm_insert_page() in that range. zap_page_range() can also be triggered from userspace with madvise(MADV_DONTNEED). If userspace is configured to call this before reusing a segment, or if there was nothing mapped at this virtual address to begin with, we can avoid calling zap_page_range() under the socket lock. That said, if userspace does not do that, then we are still responsible for calling zap_page_range(). This patch adds a flag that the user can use to hint to the kernel that a zap is not required. If the flag is not set, or if an older user application does not have a flags field at all, then the kernel calls zap_page_range as before. Also, if the flag is set but a zap is still required, the kernel performs that zap as necessary. Thus incorrectly indicating that a zap can be avoided does not change the correctness of operation. It also increases the batchsize for vm_insert_pages and prefetches the page struct for the batch since we're about to bump the refcount. An alternative mechanism could be to not have a flag, assume by default a zap is not needed, and fall back to zapping if needed. However, this would harm performance for older applications for which a zap is necessary, and thus we implement it with an explicit flag so newer applications can opt in. When using RPC-style traffic with medium sized (tens of KB) RPCs, this change yields an efficency improvement of about 30% for QPS/CPU usage. Signed-off-by: Arjun Roy <arjunroy@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Arjun Roy authored
Set zerocopy hint, event when falling back to copy, so that the pending data can be efficiently received using zerocopy when possible. Signed-off-by: Arjun Roy <arjunroy@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Arjun Roy authored
Sometimes, we may call tcp receive zerocopy when inq is 0, or inq < PAGE_SIZE, or inq is generally small enough that it is cheaper to copy rather than remap pages. In these cases, we may want to either return early (inq=0) or attempt to use the provided copy buffer to simply copy the received data. This allows us to save both system call overhead and the latency of acquiring mmap_sem in read mode for cases where it would be useless to do so. This patchset enables this behaviour by: 1. Returning quickly if inq is 0. 2. Attempting to perform a regular copy if a hybrid copybuffer is provided and it is large enough to absorb all available bytes. 3. Return quickly if no such buffer was provided and there are less than PAGE_SIZE bytes available. For small RPC ping-pong workloads, normally we would have 1 getsockopt(), 1 recvmsg() and 1 sendmsg() call per RPC. With this change, we remove the recvmsg() call entirely, reducing the syscall overhead by about 33%. In testing with small (hundreds of bytes) RPC traffic, this yields a syscall reduction of about 33% and an efficiency gain of about 3-5% when defined as QPS/CPU Util. Signed-off-by: Arjun Roy <arjunroy@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Arjun Roy authored
Sometimes, we may call tcp receive zerocopy when inq is 0, or inq < PAGE_SIZE, in which case we cannot remap pages. In this case, simply return the appropriate hint for regular copying without taking mmap_sem. Signed-off-by: Arjun Roy <arjunroy@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Arjun Roy authored
Refactor frag-is-remappable test for tcp receive zerocopy. This is part of a patch set that introduces short-circuited hybrid copies for small receive operations, which results in roughly 33% fewer syscalls for small RPC scenarios. Signed-off-by: Arjun Roy <arjunroy@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Arjun Roy authored
Refactor skb frag fast-forwarding for tcp receive zerocopy. This is part of a patch set that introduces short-circuited hybrid copies for small receive operations, which results in roughly 33% fewer syscalls for small RPC scenarios. skb_advance_to_frag(), given a skb and an offset into the skb, iterates from the first frag for the skb until we're at the frag specified by the offset. Assuming the offset provided refers to how many bytes in the skb are already read, the returned frag points to the next frag we may read from, while offset_frag is set to the number of bytes from this frag that we have already read. If frag is not null and offset_frag is equal to 0, then we may be able to map this frag's page into the process address space with vm_insert_page(). However, if offset_frag is not equal to 0, then we cannot do so. Signed-off-by: Arjun Roy <arjunroy@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Arjun Roy authored
Refactor tcp_recvmsg() by splitting it into locked and unlocked portions. Callers already holding the socket lock and not using ERRQUEUE/cmsg/busy polling can simply call tcp_recvmsg_locked(). This is in preparation for a short-circuit copy performed by TCP receive zerocopy for small (< PAGE_SIZE, or otherwise requested by the user) reads. Signed-off-by: Arjun Roy <arjunroy@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Arjun Roy authored
When TCP receive zerocopy does not successfully map the entire requested space, it outputs a 'hint' that the caller should recvmsg(). Augment zerocopy to accept a user buffer that it tries to copy this hint into - if it is possible to copy the entire hint, it will do so. This elides a recvmsg() call for received traffic that isn't exactly page-aligned in size. This was tested with RPC-style traffic of arbitrary sizes. Normally, each received message required at least one getsockopt() call, and one recvmsg() call for the remaining unaligned data. With this change, almost all of the recvmsg() calls are eliminated, leading to a savings of about 25%-50% in number of system calls for RPC-style workloads. Signed-off-by: Arjun Roy <arjunroy@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-