- 07 Apr, 2017 8 commits
-
-
Martin Blumenstingl authored
On Meson8b the MPLL parent clock (fixed_pll) has a rate of 2550MHz. Multiplying this with SDM_DEN results in a value greater than 32bits. This is not a problem on the 64bit Meson GX SoCs, but it may result in undefined behavior on the older 32bit Meson8b SoC. While rate_from_params was only introduced recently to make the math reusable from _round_rate and _recalc_rate the original bug exists much longer. Fixes: 1c50da4f ("clk: meson: add mpll support") Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> [as discussed on the ml, use DIV_ROUND_UP_ULL] Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com>
-
Martin Blumenstingl authored
According to the public datasheet all register bits in HHI_MPLL_CNTL7, HHI_MPLL_CNTL8 and HHI_MPLL_CNTL9 default to zero. On all GX SoCs these seem to be initialized by the bootloader to some default value. However, on my Meson8 board they are not initialized, leading to a division by zero in rate_from_params as the math is: (parent_rate * SDM_DEN) / ((SDM_DEN * 0) + 0) According to the datasheet, the minimum n2 value is 4. The rate provided by the clock when n2 is less than this minimum is unpredictable. In such case, we report an error. Although the rate_from_params function was only introduced recently the original bug has been there for much longer. It was only exposed recently when the MPLL clocks were added to the Meson8b clock driver. Fixes: 1c50da4f ("clk: meson: add mpll support") Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com>
-
Jerome Brunet authored
This adds the cts_i958 clock to control the clock source of the spdif output block. This mux is not explicitly mentionned in the documentation but it is critical to the spdif dai. It is used to select whether the clock source of the spdif output is cts_amclk (when data are taken from i2s buffer) or the cts_mclk_i958 (when data are taken from the spdif buffer) Acked-by:
Michael Turquette <mturquette@baylibre.com> Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com>
-
Jerome Brunet authored
Add the spdif master clock also referred as cts_mclk_i958 Acked-by:
Michael Turquette <mturquette@baylibre.com> Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com>
-
Jerome Brunet authored
Add the i2s master clock also referred as cts_amclk Acked-by:
Michael Turquette <mturquette@baylibre.com> Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com>
-
Jerome Brunet authored
The audio divider needs a specific clock divider driver. With am mpll parent clock, which is able to provide a fairly precise rate, the generic divider tends to select low value of the divider. In such case the quality of the clock is very poor. For the same final rate, maximizing the audio clock divider value and selecting the corresponding mpll rate gives better results. This is what this driver aims to acheive. So far, so good. Cc: Hendrik v. Raven <hendrik@consetetur.de> Acked-by:
Michael Turquette <mturquette@baylibre.com> Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com>
-
Jerome Brunet authored
The clock controller is getting more complex and it might be possible, in the future, to have holes in the clk_hw_onecell_data array. Just make sure we skip those holes if it ever happens. Acked-by:
Michael Turquette <mturquette@baylibre.com> Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com>
-
Jerome Brunet authored
Suggested-by:
Michael Turquette <mturquette@baylibre.com> Cc: Kevin Hilman <khilman@baylibre.com>, Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com>
-
- 04 Apr, 2017 9 commits
-
-
Kevin Hilman authored
* v4.12/clk-drivers: clk: meson-gxbb: Add GXL/GXM GP0 Variant clk: meson-gxbb: Add GP0 PLL init parameters clk: meson: Add support for parameters for specific PLLs clk: meson-gxbb: Add MALI clocks clk: meson: mpll: correct N2 maximum value clk: meson8b: add the mplls clocks 0, 1 and 2 clk: meson: gxbb: mpll: use rw operation clk: meson: mpll: add rw operation clk: gxbb: put dividers and muxes in tables clk: meson8b: put dividers and muxes in tables clk: meson: add missing const qualifiers on gate arrays clk: meson: fix SET_PARM macro
-
Neil Armstrong authored
The clock tree in the Amlogic GXBB and GXL/GXM SoCs is shared, but the GXL/GXM SoCs embeds a different GP0 PLL, and needs different parameters with a vendor provided reduced rate table. This patch adds the GXL GP0 variant, and adds a GXL DT compatible in order to use the GXL GP0 PLL instead of the GXBB specific one. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1490178747-14837-4-git-send-email-narmstrong@baylibre.com
-
Neil Armstrong authored
Tha Amlogic GXBB SoC GP0 PLL needs some vendor provided parameters to be initializated in the the GP0 control registers before configuring the rate with the rate table provided parameters. GXBB GP0 PLL tweaks are also selected to respect the vendor init procedure. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1490178747-14837-3-git-send-email-narmstrong@baylibre.com
-
Neil Armstrong authored
In recent Amlogic GXBB, GXL and GXM SoCs, the GP0 PLL needs some specific parameters in order to initialize and lock correctly. This patch adds an optional PARAM table used to initialize the PLL to a default value with it's parameters in order to achieve to desired frequency. The GP0 PLL in GXBB, GXL/GXM also needs some tweaks in the initialization steps, and these are exposed along the PARAM table. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1490178747-14837-2-git-send-email-narmstrong@baylibre.com
-
Neil Armstrong authored
The Mali is clocked by two identical clock paths behind a glitch free mux to safely change frequency while running. The two "mali_0" and "mali_1" clocks are composed of a mux, divider and gate. Expose these two clocks trees using generic clocks. Finally the glitch free mux is added as "mali" clock. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1490177935-9646-3-git-send-email-narmstrong@baylibre.com
-
Neil Armstrong authored
Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1490178747-14837-6-git-send-email-narmstrong@baylibre.com
-
Neil Armstrong authored
This patch exposes the GP0 PLL clock id in the dt bindings. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1490178747-14837-5-git-send-email-narmstrong@baylibre.com
-
Neil Armstrong authored
Add missing MALI clock IDs and expose the muxes and gates in the dt-bindings. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1490177935-9646-2-git-send-email-narmstrong@baylibre.com
-
Jerome Brunet authored
Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20170309104154.28295-10-jbrunet@baylibre.com
-
- 27 Mar, 2017 8 commits
-
-
Jerome Brunet authored
Gxbb datasheet says N2 maximum value is 127 but the register field is 9 bits wide, the maximum value should 511. Test shows value greater than 127, all the way to 511, works well Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20170309104154.28295-9-jbrunet@baylibre.com
-
Jerome Brunet authored
Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20170309104154.28295-8-jbrunet@baylibre.com
-
Jerome Brunet authored
Use read/write operations for the mpll clocks instead of the read-only ones. Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20170309104154.28295-7-jbrunet@baylibre.com
-
Jerome Brunet authored
This patch adds new callbacks to the meson-mpll driver to control and set the pll rate. For this, we also need to add the enable bit and sdm enable bit. The corresponding parameters are added to mpll data structure. Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20170309104154.28295-6-jbrunet@baylibre.com
-
Jerome Brunet authored
Until now, there was only 2 dividers and 2 muxes declared for the gxbb platform. With the ongoing work on various subsystem, including audio, this is about to change. Use the same approach as gates for dividers and muxes, putting them in tables to fix the register address at runtime. Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20170309104154.28295-5-jbrunet@baylibre.com
-
Jerome Brunet authored
Until now, there was only 1 divider and 1 mux declared for the meson8b platform. With the ongoing work on various system, including audio, this is about to change. Use the same approach as gates for dividers and muxes, putting them in tables to fix the register address at runtime. Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20170309104154.28295-4-jbrunet@baylibre.com
-
Jerome Brunet authored
Reported-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20170309104154.28295-3-jbrunet@baylibre.com
-
Jerome Brunet authored
parameter val is not enclosed in parenthesis which is buggy when given an expression instead of a simple value Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Reviewed-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/20170309104154.28295-2-jbrunet@baylibre.com
-
- 05 Mar, 2017 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix double-free in batman-adv, from Sven Eckelmann. 2) Fix packet stats for fast-RX path, from Joannes Berg. 3) Netfilter's ip_route_me_harder() doesn't handle request sockets properly, fix from Florian Westphal. 4) Fix sendmsg deadlock in rxrpc, from David Howells. 5) Add missing RCU locking to transport hashtable scan, from Xin Long. 6) Fix potential packet loss in mlxsw driver, from Ido Schimmel. 7) Fix race in NAPI handling between poll handlers and busy polling, from Eric Dumazet. 8) TX path in vxlan and geneve need proper RCU locking, from Jakub Kicinski. 9) SYN processing in DCCP and TCP need to disable BH, from Eric Dumazet. 10) Properly handle net_enable_timestamp() being invoked from IRQ context, also from Eric Dumazet. 11) Fix crash on device-tree systems in xgene driver, from Alban Bedel. 12) Do not call sk_free() on a locked socket, from Arnaldo Carvalho de Melo. 13) Fix use-after-free in netvsc driver, from Dexuan Cui. 14) Fix max MTU setting in bonding driver, from WANG Cong. 15) xen-netback hash table can be allocated from softirq context, so use GFP_ATOMIC. From Anoob Soman. 16) Fix MAC address change bug in bgmac driver, from Hari Vyas. 17) strparser needs to destroy strp_wq on module exit, from WANG Cong. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (69 commits) strparser: destroy workqueue on module exit sfc: fix IPID endianness in TSOv2 sfc: avoid max() in array size rds: remove unnecessary returned value check rxrpc: Fix potential NULL-pointer exception nfp: correct DMA direction in XDP DMA sync nfp: don't tell FW about the reserved buffer space net: ethernet: bgmac: mac address change bug net: ethernet: bgmac: init sequence bug xen-netback: don't vfree() queues under spinlock xen-netback: keep a local pointer for vif in backend_disconnect() netfilter: nf_tables: don't call nfnetlink_set_err() if nfnetlink_send() fails netfilter: nft_set_rbtree: incorrect assumption on lower interval lookups netfilter: nf_conntrack_sip: fix wrong memory initialisation can: flexcan: fix typo in comment can: usb_8dev: Fix memory leak of priv->cmd_msg_buffer can: gs_usb: fix coding style can: gs_usb: Don't use stack memory for USB transfers ixgbe: Limit use of 2K buffers on architectures with 256B or larger cache lines ixgbe: update the rss key on h/w, when ethtool ask for it ...
-
- 04 Mar, 2017 13 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull more KVM updates from Radim Krčmář: "Second batch of KVM changes for the 4.11 merge window: PPC: - correct assumption about ASDR on POWER9 - fix MMIO emulation on POWER9 x86: - add a simple test for ioperm - cleanup TSS (going through KVM tree as the whole undertaking was caused by VMX's use of TSS) - fix nVMX interrupt delivery - fix some performance counters in the guest ... and two cleanup patches" * tag 'kvm-4.11-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: nVMX: Fix pending events injection x86/kvm/vmx: remove unused variable in segment_base() selftests/x86: Add a basic selftest for ioperm x86/asm: Tidy up TSS limit code kvm: convert kvm.users_count from atomic_t to refcount_t KVM: x86: never specify a sample period for virtualized in_tx_cp counters KVM: PPC: Book3S HV: Don't use ASDR for real-mode HPT faults on POWER9 KVM: PPC: Book3S HV: Fix software walk of guest process page tables
-
git://git.lwn.net/linuxLinus Torvalds authored
Pull documentation fixes from Jonathan Corbet: "A few fixes for the docs tree, including one for a 4.11 build regression" * tag 'docs-4.11-fixes' of git://git.lwn.net/linux: Documentation/sphinx: fix primary_domain configuration docs: Fix htmldocs build failure doc/ko_KR/memory-barriers: Update control-dependencies section pcieaer doc: update the link Documentation: Update path to sysrq.txt
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging/IIO driver fixes from Greg KH: "Here are a few small staging and IIO driver fixes for issues that showed up after the big set if changes you merged last week. Nothing major, just small bugs resolved in some IIO drivers, a lustre allocation fix, and some RaspberryPi driver fixes for reported problems, as well as a MAINTAINERS entry update. All of these have been in linux-next for a week with no reported issues" * tag 'staging-4.11-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: fsl-mc: fix warning in DT ranges parser MAINTAINERS: Remove Noralf Trønnes as fbtft maintainer staging: vchiq_2835_arm: Make cache-line-size a required DT property staging: bcm2835/mmal-vchiq: unlock on error in buffer_from_host() staging/lustre/lnet: Fix allocation size for sv_cpt_data iio: adc: xilinx: Fix error handling iio: 104-quad-8: Fix off-by-one error when addressing flag register iio: adc: handle unknow of_device_id data
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: - vmalloc stack regression in CCM - Build problem in CRC32 on ARM - Memory leak in cavium - Missing Kconfig dependencies in atmel and mediatek - XTS Regression on some platforms (s390 and ppc) - Memory overrun in CCM test vector * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: vmx - Use skcipher for xts fallback crypto: vmx - Use skcipher for cbc fallback crypto: testmgr - Pad aes_ccm_enc_tv_template vector crypto: arm/crc32 - add build time test for CRC instruction support crypto: arm/crc32 - fix build error with outdated binutils crypto: ccm - move cbcmac input off the stack crypto: xts - Propagate NEED_FALLBACK bit crypto: api - Add crypto_requires_off helper crypto: atmel - CRYPTO_DEV_MEDIATEK should depend on HAS_DMA crypto: atmel - CRYPTO_DEV_ATMEL_TDES and CRYPTO_DEV_ATMEL_SHA should depend on HAS_DMA crypto: cavium - fix leak on curr if curr->head fails to be allocated crypto: cavium - Fix couple of static checker errors
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull misc final vfs updates from Al Viro: "A few unrelated patches that got beating in -next. Everything else will have to go into the next window ;-/" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: hfs: fix hfs_readdir() selftest for default_file_splice_read() infoleak 9p: constify ->d_name handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull more SCSI updates from James Bottomley: "This is the set of stuff that didn't quite make the initial pull and a set of fixes for stuff which did. The new stuff is basically lpfc (nvme), qedi and aacraid. The fixes cover a lot of previously submitted stuff, the most important of which probably covers some of the failing irq vectors allocation and other fallout from having the SCSI command allocated as part of the block allocation functions" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (59 commits) scsi: qedi: Fix memory leak in tmf response processing. scsi: aacraid: remove redundant zero check on ret scsi: lpfc: use proper format string for dma_addr_t scsi: lpfc: use div_u64 for 64-bit division scsi: mac_scsi: Fix MAC_SCSI=m option when SCSI=m scsi: cciss: correct check map error. scsi: qla2xxx: fix spelling mistake: "seperator" -> "separator" scsi: aacraid: Fixed expander hotplug for SMART family scsi: mpt3sas: switch to pci_alloc_irq_vectors scsi: qedf: fixup compilation warning about atomic_t usage scsi: remove scsi_execute_req_flags scsi: merge __scsi_execute into scsi_execute scsi: simplify scsi_execute_req_flags scsi: make the sense header argument to scsi_test_unit_ready mandatory scsi: sd: improve TUR handling in sd_check_events scsi: always zero sshdr in scsi_normalize_sense scsi: scsi_dh_emc: return success in clariion_std_inquiry() scsi: fix memory leak of sdpk on when gd fails to allocate scsi: sd: make sd_devt_release() static scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework. ...
-
WANG Cong authored
Fixes: 43a0c675 ("strparser: Stream parser for messages") Cc: Tom Herbert <tom@herbertland.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree, they are: 1) Missing check for full sock in ip_route_me_harder(), from Florian Westphal. 2) Incorrect sip helper structure initilization that breaks it when several ports are used, from Christophe Leroy. 3) Fix incorrect assumption when looking up for matching with adjacent intervals in the nft_set_rbtree. 4) Fix broken netlink event error reporting in nf_tables that results in misleading ESRCH errors propagated to userspace listeners. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm fixes from Dan Williams: "A fix and regression test case for nvdimm namespace label compatibility. Details: - An "nvdimm namespace label" is metadata on an nvdimm that provisions dimm capacity into a "namespace" that can host a block device / dax-filesytem, or a device-dax character device. A namespace is an object that other operating environment and platform firmware needs to comprehend for capabilities like booting from an nvdimm. The label metadata contains a checksum that Linux was not calculating correctly leading to other environments rejecting the Linux label. These have received a build success notification from the kbuild robot, and a positive test result from Nick who reported the problem" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nfit, libnvdimm: fix interleave set cookie calculation tools/testing/nvdimm: make iset cookie predictable
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fixes from Bjorn Helgaas: - fix NULL pointer dereferences in many DesignWare-based drivers due to refactoring error - fix Altera config write breakage due to my refactoring error * tag 'pci-v4.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: altera: Fix TLP_CFG_DW0 for TLP write PCI: dwc: Fix crashes seen due to missing assignments
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc fixes and cleanups from Helge Deller: "Nothing really important in this patchset: fix resource leaks in error paths, coding style cleanups and code removal" * 'parisc-4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Remove flush_user_dcache_range and flush_user_icache_range parisc: fix a printk parisc: ccio-dma: Handle return NULL error from ioremap_nocache parisc: Define access_ok() as macro parisc: eisa: Fix resource leaks in error paths parisc: eisa: Remove coding style errors
-
git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds authored
Pull Xtensa updates from Max Filippov: - clean up bootable image build targets: provide separate 'Image', 'zImage' and 'uImage' make targets that only build corresponding image type. Make 'all' build all images appropriate for a platform - allow merging vectors code into .text section as a preparation step for XIP support - fix handling external FDT when the kernel is built without BLK_DEV_INITRD support * tag 'xtensa-20170303' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: allow merging vectors into .text section xtensa: clean up bootable image build targets xtensa: move parse_tag_fdt out of #ifdef CONFIG_BLK_DEV_INITRD
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC late DT updates from Arnd Bergmann: "These updates have been kept in a separate branch mostly because they rely on updates to the respective clk drivers to keep the shared header files in sync. This includes two branches for arm64 dt updates, both following up on earlier changes for the same platforms that are already merged: Samsung: - add USB3 support in Exynos7 - minor PM related updates Amlogic: - new machines: WeTek Set-top-boxes - various devices added to DT There are also a couple of bugfixes that trickled in since the start of the merge window: - The moxart_defconfig was not building the intended platform - CPU-hotplug was broken on ux500 - Coresight was broken on Juno (never worked)" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits) ARM: deconfig: fix the moxart defconfig ARM: ux500: resume the second core properly arm64: dts: juno: update definition for programmable replicator arm64: dts: exynos: Add regulators for Vbus and Vbus-Boost arm64: dts: exynos: Add USB 3.0 controller node for Exynos7 arm64: dts: exynos: Use macros for pinctrl configuration on Exynos7 pinctrl: dt-bindings: samsung: Add Exynos7 specific pinctrl macro definitions arm64: dts: exynos: Add initial configuration for DISP clocks for TM2/TM2e ARM64: dts: meson-gxbb-p200: add ADC laddered keys ARM64: dts: meson: meson-gx: add the SAR ADC ARM64: dts: meson-gxl: add the pwm_ao_b pin ARM64: dts: meson-gx: add the missing pwm_AO_ab node clk: gxbb: fix CLKID_ETH defined twice ARM64: dts: meson-gxl: rename Nexbox A95x for consistency clk: gxbb: add the SAR ADC clocks and expose them dt-bindings: amlogic: Add WeTek boards ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play dt-bindings: vendor-prefix: Add wetek vendor prefix ARM64: dts: meson-gxm: Rename q200 and q201 DT files for consistency ARM64: dts: meson-gx: Add HDMI HPD/DDC pinctrl nodes ...
-