Skip to content

L
linux
Switch branch/tag
  1. 15 Jun, 2016 18 commits
    • Rui Salvaterra's avatar
      lib: lz4: fixed zram with lz4 on big endian machines · b6128b21
      Rui Salvaterra authored 
      commit 3e26a691 upstream.

Based on Sergey's test patch [1], this fixes zram with lz4 compression
on big endian cpus.

Note that the 64-bit preprocessor test is not a cleanup, it's part of
the fix, since those identifiers are bogus (for example, __ppc64__
isn't defined anywhere else in the kernel, which means we'd fall into
the 32-bit definitions on ppc64).

Tested on ppc64 with no regression on x86_64.

[1] http://marc.info/?l=linux-kernel&m=145994470805853&w=4Suggested-by: default avatarSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: default avatarRui Salvaterra <rsalvaterra@gmail.com>
Reviewed-by: default avatarSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      b6128b21
    • Ben Hutchings's avatar
      spi: spi-ti-qspi: Handle truncated frames properly · e5bb0548
      Ben Hutchings authored 
      commit 1ff7760f upstream.

We clamp frame_len_words to a maximum of 4096, but do not actually
limit the number of words written or read through the DATA registers
or the length added to spi_message::actual_length.  This results in
silent data corruption for commands longer than this maximum.

Recalculate the length of each transfer, taking frame_len_words into
account.  Use this length in qspi_{read,write}_msg(), and to increment
spi_message::actual_length.
Signed-off-by: default avatarBen Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      e5bb0548
    • Ben Hutchings's avatar
      spi: spi-ti-qspi: Fix FLEN and WLEN settings if bits_per_word is overridden · cfb3474f
      Ben Hutchings authored 
      commit ea1b60fb upstream.

Each transfer can specify 8, 16 or 32 bits per word independently of
the default for the device being addressed.  However, currently we
calculate the number of words in the frame assuming that the word size
is the device default.

If multiple transfers in the same message have differing
bits_per_word, we bitwise-or the different values in the WLEN register
field.

Fix both of these.  Also rename 'frame_length' to 'frame_len_words' to
make clear that it's not a byte count like spi_message::frame_length.
Signed-off-by: default avatarBen Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
[bwh: Backported to 3.16:
 - QSPI_WLEN_MAX_BITS is not defined so use the literal value 128
 - Adjust context]
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      cfb3474f
    • Dmitry Ivanov's avatar
      nl80211: check netlink protocol in socket release notification · 9e27e421
      Dmitry Ivanov authored 
      commit 8f815cdd upstream.

A non-privileged user can create a netlink socket with the same port_id as
used by an existing open nl80211 netlink socket (e.g. as used by a hostapd
process) with a different protocol number.

Closing this socket will then lead to the notification going to nl80211's
socket release notification handler, and possibly cause an action such as
removing a virtual interface.

Fix this issue by checking that the netlink protocol is NETLINK_GENERIC.
Since generic netlink has no notifier chain of its own, we can't fix the
problem more generically.

Fixes: 026331c4 ("cfg80211/mac80211: allow registering for and sending action frames")
Signed-off-by: default avatarDmitry Ivanov <dima@ubnt.com>
[rewrite commit message]
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      9e27e421
    • Kailang Yang's avatar
      ALSA: usb-audio: Skip volume controls triggers hangup on Dell USB Dock · 0589641b
      Kailang Yang authored 
      commit adcdd0d5 upstream.

This is Dell usb dock audio workaround.
It was fixed the master volume keep lower.

[Some background: the patch essentially skips the controls of a couple
 of FU volumes.  Although the firmware exposes the dB and the value
 information via the usb descriptor, changing the values (we set the
 min volume as default) screws up the device.  Although this has been
 fixed in the newer firmware, the devices are shipped with the old
 firmware, thus we need the workaround in the driver side.  -- tiwai]
Signed-off-by: default avatarKailang Yang <kailang@realtek.com>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      0589641b
    • David Matlack's avatar
      kvm: x86: do not leak guest xcr0 into host interrupt handlers · 65ed9de4
      David Matlack authored 
      commit fc5b7f3b upstream.

An interrupt handler that uses the fpu can kill a KVM VM, if it runs
under the following conditions:
 - the guest's xcr0 register is loaded on the cpu
 - the guest's fpu context is not loaded
 - the host is using eagerfpu

Note that the guest's xcr0 register and fpu context are not loaded as
part of the atomic world switch into "guest mode". They are loaded by
KVM while the cpu is still in "host mode".

Usage of the fpu in interrupt context is gated by irq_fpu_usable(). The
interrupt handler will look something like this:

if (irq_fpu_usable()) {
        kernel_fpu_begin();

        [... code that uses the fpu ...]

        kernel_fpu_end();
}

As long as the guest's fpu is not loaded and the host is using eager
fpu, irq_fpu_usable() returns true (interrupted_kernel_fpu_idle()
returns true). The interrupt handler proceeds to use the fpu with
the guest's xcr0 live.

kernel_fpu_begin() saves the current fpu context. If this uses
XSAVE[OPT], it may leave the xsave area in an undesirable state.
According to the SDM, during XSAVE bit i of XSTATE_BV is not modified
if bit i is 0 in xcr0. So it's possible that XSTATE_BV[i] == 1 and
xcr0[i] == 0 following an XSAVE.

kernel_fpu_end() restores the fpu context. Now if any bit i in
XSTATE_BV == 1 while xcr0[i] == 0, XRSTOR generates a #GP. The
fault is trapped and SIGSEGV is delivered to the current process.

Only pre-4.2 kernels appear to be vulnerable to this sequence of
events. Commit 653f52c3 ("kvm,x86: load guest FPU context more eagerly")
from 4.2 forces the guest's fpu to always be loaded on eagerfpu hosts.

This patch fixes the bug by keeping the host's xcr0 loaded outside
of the interrupts-disabled region where KVM switches into guest mode.
Suggested-by: default avatarAndy Lutomirski <luto@amacapital.net>
Signed-off-by: default avatarDavid Matlack <dmatlack@google.com>
[Move load after goto cancel_injection. - Paolo]
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      65ed9de4
    • Jerome Marchand's avatar
      assoc_array: don't call compare_object() on a node · d513fcfd
      Jerome Marchand authored 
      commit 8d4a2ec1 upstream.

Changes since V1: fixed the description and added KASan warning.

In assoc_array_insert_into_terminal_node(), we call the
compare_object() method on all non-empty slots, even when they're
not leaves, passing a pointer to an unexpected structure to
compare_object(). Currently it causes an out-of-bound read access
in keyring_compare_object detected by KASan (see below). The issue
is easily reproduced with keyutils testsuite.
Only call compare_object() when the slot is a leave.

KASan warning:
==================================================================
BUG: KASAN: slab-out-of-bounds in keyring_compare_object+0x213/0x240 at addr ffff880060a6f838
Read of size 8 by task keyctl/1655
=============================================================================
BUG kmalloc-192 (Not tainted): kasan: bad access detected
-----------------------------------------------------------------------------

Disabling lock debugging due to kernel taint
INFO: Allocated in assoc_array_insert+0xfd0/0x3a60 age=69 cpu=1 pid=1647
	___slab_alloc+0x563/0x5c0
	__slab_alloc+0x51/0x90
	kmem_cache_alloc_trace+0x263/0x300
	assoc_array_insert+0xfd0/0x3a60
	__key_link_begin+0xfc/0x270
	key_create_or_update+0x459/0xaf0
	SyS_add_key+0x1ba/0x350
	entry_SYSCALL_64_fastpath+0x12/0x76
INFO: Slab 0xffffea0001829b80 objects=16 used=8 fp=0xffff880060a6f550 flags=0x3fff8000004080
INFO: Object 0xffff880060a6f740 @offset=5952 fp=0xffff880060a6e5d1

Bytes b4 ffff880060a6f730: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffff880060a6f740: d1 e5 a6 60 00 88 ff ff 0e 00 00 00 00 00 00 00  ...`............
Object ffff880060a6f750: 02 cf 8e 60 00 88 ff ff 02 c0 8e 60 00 88 ff ff  ...`.......`....
Object ffff880060a6f760: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffff880060a6f770: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffff880060a6f780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffff880060a6f790: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffff880060a6f7a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffff880060a6f7b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffff880060a6f7c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffff880060a6f7d0: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffff880060a6f7e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffff880060a6f7f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
CPU: 0 PID: 1655 Comm: keyctl Tainted: G    B           4.5.0-rc4-kasan+ #291
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
 0000000000000000 000000001b2800b4 ffff880060a179e0 ffffffff81b60491
 ffff88006c802900 ffff880060a6f740 ffff880060a17a10 ffffffff815e2969
 ffff88006c802900 ffffea0001829b80 ffff880060a6f740 ffff880060a6e650
Call Trace:
 [<ffffffff81b60491>] dump_stack+0x85/0xc4
 [<ffffffff815e2969>] print_trailer+0xf9/0x150
 [<ffffffff815e9454>] object_err+0x34/0x40
 [<ffffffff815ebe50>] kasan_report_error+0x230/0x550
 [<ffffffff819949be>] ? keyring_get_key_chunk+0x13e/0x210
 [<ffffffff815ec62d>] __asan_report_load_n_noabort+0x5d/0x70
 [<ffffffff81994cc3>] ? keyring_compare_object+0x213/0x240
 [<ffffffff81994cc3>] keyring_compare_object+0x213/0x240
 [<ffffffff81bc238c>] assoc_array_insert+0x86c/0x3a60
 [<ffffffff81bc1b20>] ? assoc_array_cancel_edit+0x70/0x70
 [<ffffffff8199797d>] ? __key_link_begin+0x20d/0x270
 [<ffffffff8199786c>] __key_link_begin+0xfc/0x270
 [<ffffffff81993389>] key_create_or_update+0x459/0xaf0
 [<ffffffff8128ce0d>] ? trace_hardirqs_on+0xd/0x10
 [<ffffffff81992f30>] ? key_type_lookup+0xc0/0xc0
 [<ffffffff8199e19d>] ? lookup_user_key+0x13d/0xcd0
 [<ffffffff81534763>] ? memdup_user+0x53/0x80
 [<ffffffff819983ea>] SyS_add_key+0x1ba/0x350
 [<ffffffff81998230>] ? key_get_type_from_user.constprop.6+0xa0/0xa0
 [<ffffffff828bcf4e>] ? retint_user+0x18/0x23
 [<ffffffff8128cc7e>] ? trace_hardirqs_on_caller+0x3fe/0x580
 [<ffffffff81004017>] ? trace_hardirqs_on_thunk+0x17/0x19
 [<ffffffff828bc432>] entry_SYSCALL_64_fastpath+0x12/0x76
Memory state around the buggy address:
 ffff880060a6f700: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00
 ffff880060a6f780: 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc
>ffff880060a6f800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
                                        ^
 ffff880060a6f880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff880060a6f900: fc fc fc fc fc fc 00 00 00 00 00 00 00 00 00 00
==================================================================
Signed-off-by: default avatarJerome Marchand <jmarchan@redhat.com>
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      d513fcfd
    • Sebastian Ott's avatar
      s390/scm_blk: fix deadlock for requests != REQ_TYPE_FS · 74599272
      Sebastian Ott authored 
      commit b707c65a upstream.

When we refuse a non REQ_TYPE_FS request in the build request function
we already hold the queue lock. Thus we must not call blk_end_request_all
but __blk_end_request_all.
Reported-by: default avatarPeter Oberparleiter <oberpar@linux.vnet.ibm.com>
Fixes: de9587a2 ('s390/scm_blk: fix endless loop for requests != REQ_TYPE_FS')
Signed-off-by: default avatarSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      74599272
    • Srinivas Kandagatla's avatar
      libahci: save port map for forced port map · 8eb71f12
      Srinivas Kandagatla authored 
      commit 2fd0f46c upstream.

In usecases where force_port_map is used saved_port_map is never set,
resulting in not programming the PORTS_IMPL register as part of initial
config. This patch fixes this by setting it to port_map even in case
where force_port_map is used, making it more inline with other parts of
the code.

Fixes: 566d1827 ("libata: disable forced PORTS_IMPL for >= AHCI 1.3")
Signed-off-by: default avatarSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: default avatarTejun Heo <tj@kernel.org>
Reviewed-by: default avatarAndy Gross <andy.gross@linaro.org>
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      8eb71f12
    • Vladis Dronov's avatar
      Input: gtco - fix crash on detecting device without endpoints · 772703ca
      Vladis Dronov authored 
      commit 162f98de upstream.

The gtco driver expects at least one valid endpoint. If given malicious
descriptors that specify 0 for the number of endpoints, it will crash in
the probe function. Ensure there is at least one endpoint on the interface
before using it.

Also let's fix a minor coding style issue.

The full correct report of this issue can be found in the public
Red Hat Bugzilla:

https://bugzilla.redhat.com/show_bug.cgi?id=1283385Reported-by: default avatarRalf Spenneberg <ralf@spenneberg.net>
Signed-off-by: default avatarVladis Dronov <vdronov@redhat.com>
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      772703ca
    • John Keeping's avatar
      drm/qxl: fix cursor position with non-zero hotspot · f8d5d740
      John Keeping authored 
      commit d59a1f71 upstream.

The SPICE protocol considers the position of a cursor to be the location
of its active pixel on the display, so the cursor is drawn with its
top-left corner at "(x - hot_spot_x, y - hot_spot_y)" but the DRM cursor
position gives the location where the top-left corner should be drawn,
with the hotspot being a hint for drivers that need it.

This fixes the location of the window resize cursors when using Fluxbox
with the QXL DRM driver and both the QXL and modesetting X drivers.
Signed-off-by: default avatarJohn Keeping <john@metanate.com>
Reviewed-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1447845445-2116-1-git-send-email-john@metanate.comSigned-off-by: default avatarJani Nikula <jani.nikula@intel.com>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      f8d5d740
    • Krzysztof Kozlowski's avatar
      regulator: s2mps11: Fix invalid selector mask and voltages for buck9 · 18ac9c5e
      Krzysztof Kozlowski authored 
      commit 3b672623 upstream.

The buck9 regulator of S2MPS11 PMIC had incorrect vsel_mask (0xff
instead of 0x1f) thus reading entire register as buck9's voltage. This
effectively caused regulator core to interpret values as higher voltages
than they were and then to set real voltage much lower than intended.

The buck9 provides power to other regulators, including LDO13
and LDO19 which supply the MMC2 (SD card). On Odroid XU3/XU4 the lower
voltage caused SD card detection errors on Odroid XU3/XU4:
	mmc1: card never left busy state
	mmc1: error -110 whilst initialising SD card

During driver probe the regulator core was checking whether initial
voltage matches the constraints. With incorrect vsel_mask of 0xff and
default value of 0x50, the core interpreted this as 5 V which is outside
of constraints (3-3.775 V). Then the regulator core was adjusting the
voltage to match the constraints. With incorrect vsel_mask this new
voltage mapped to a vere low voltage in the driver.
Signed-off-by: default avatarKrzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: default avatarJavier Martinez Canillas <javier@osg.samsung.com>
Tested-by: default avatarJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
[bwh: Backported to 3.16: s2mps11_buck9_ops was never combined with other
 macros here, so just change the n_voltages and vsel_mask fields]
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      18ac9c5e
    • Lokesh Vutla's avatar
      ARM: OMAP2+: hwmod: Fix updating of sysconfig register · 08cd7e84
      Lokesh Vutla authored 
      commit 3ca4a238 upstream.

Commit 127500cc ("ARM: OMAP2+: Only write the sysconfig on idle
when necessary") talks about verification of sysconfig cache value before
updating it, only during idle path. But the patch is adding the
verification in the enable path. So, adding the check in a proper place
as per the commit description.

Not keeping this check during enable path as there is a chance of losing
context and it is safe to do on idle as the context of the register will
never be lost while the device is active.
Signed-off-by: default avatarLokesh Vutla <lokeshvutla@ti.com>
Acked-by: default avatarTero Kristo <t-kristo@ti.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Fixes: commit 127500cc "ARM: OMAP2+: Only write the sysconfig on idle when necessary"
[paul@pwsan.com: appears to have been caused by my own mismerge of the
 originally posted patch]
Signed-off-by: default avatarPaul Walmsley <paul@pwsan.com>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      08cd7e84
    • Jon Hunter's avatar
      ARM: OMAP2+: Only write the sysconfig on idle when necessary · 176122b7
      Jon Hunter authored 
      commit 127500cc upstream.

Currently, whenever we idle a device _idle_sysc() is called and writes to the
devices SYSCONFIG register to set the idle mode. A lot devices are using the
smart-idle mode and so the write to the SYSCONFIG register is programming the
same value that is already stored in the register.

Writes to the devices SYSCONFIG register can be slow, for example, writing to
the DMTIMER SYSCONFIG register takes 3 interface clock cycles and 3 functional
clock cycles. If the DMTIMER is using the slow 32kHz functional clock this can
take ~100us.

Furthermore, during boot on an OMAP4430 panda board, I see that there are 100
calls to _idle_sysc(), however, only 3 out of the 100 calls actually write
the SYSCONFIG register with a new value.

Therefore, to avoid unnecessary writes to device SYSCONFIG registers when
idling the device, only write the value if the value has changed. It should be
safe to do this on idle as the context of the register will never be lost while
the device is active.

Verified that suspend, CORE off and retention states are working with this
change on OMAP3430 Beagle board.
Signed-off-by: default avatarJon Hunter <jon-hunter@ti.com>
[paul@pwsan.com: updated to apply]
Signed-off-by: default avatarPaul Walmsley <paul@pwsan.com>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      176122b7
    • Alan Stern's avatar
      HID: usbhid: fix inconsistent reset/resume/reset-resume behavior · c57950a1
      Alan Stern authored 
      commit 972e6a99 upstream.

The usbhid driver has inconsistently duplicated code in its post-reset,
resume, and reset-resume pathways.

	reset-resume doesn't check HID_STARTED before trying to
	restart the I/O queues.

	resume fails to clear the HID_SUSPENDED flag if HID_STARTED
	isn't set.

	resume calls usbhid_restart_queues() with usbhid->lock held
	and the others call it without holding the lock.

The first item in particular causes a problem following a reset-resume
if the driver hasn't started up its I/O.  URB submission fails because
usbhid->urbin is NULL, and this triggers an unending reset-retry loop.

This patch fixes the problem by creating a new subroutine,
hid_restart_io(), to carry out all the common activities.  It also
adds some checks that were missing in the original code:

	After a reset, there's no need to clear any halted endpoints.

	After a resume, if a reset is pending there's no need to
	restart any I/O until the reset is finished.

	After a resume, if the interrupt-IN endpoint is halted there's
	no need to submit the input URB until the halt has been
	cleared.
Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Reported-by: default avatarDaniel Fraga <fragabr@gmail.com>
Tested-by: default avatarDaniel Fraga <fragabr@gmail.com>
Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      c57950a1
    • Sugar Zhang's avatar
      ASoC: rt5640: Correct the digital interface data select · 77e4dd2c
      Sugar Zhang authored 
      commit 653aa464 upstream.

this patch corrects the interface adc/dac control register definition
according to datasheet.
Signed-off-by: default avatarSugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      77e4dd2c
    • Ben Hutchings's avatar
      Revert "net: validate variable length ll headers" · f58a6c08
      Ben Hutchings authored 
      This reverts commit 2793a23a, which was
commit 2793a23a upstream.  It is
pointless unless af_packet calls the new function.
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      f58a6c08
    • Ben Hutchings's avatar
      Revert "ax25: add link layer header validation function" · 8547d08f
      Ben Hutchings authored 
      This reverts commit ea47781c, which was
commit ea47781c upstream.  It is
pointless unless af_packet calls the new function.
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      8547d08f
  3. 30 Apr, 2016 22 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7