- 15 Oct, 2024 5 commits
-
-
Oliver Neukum authored
The same bug as in the disconnect code path also exists in the case of a failure late during the probe process. The flag must also be set. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Link: https://patch.msgid.link/20241010131934.1499695-1-oneukum@suse.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Kai Shen authored
This patch adds missing percpu_ref_exit when releasing percpu refs. When releasing percpu refs, percpu_ref_exit should be called. Otherwise, memory leak happens. Fixes: 79a22238 ("net/smc: Use percpu ref for wr tx reference") Signed-off-by:
Kai Shen <KaiShen@linux.alibaba.com> Reviewed-by:
Dust Li <dust.li@linux.alibaba.com> Reviewed-by:
Wenjia Zhang <wenjia@linux.ibm.com> Link: https://patch.msgid.link/20241010115624.7769-1-KaiShen@linux.alibaba.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Jinjie Ruan says: ==================== posix-clock: Fix missing timespec64 check for PTP clock Check timespec64 in pc_clock_settime() for PTP clock as the man manual of clock_settime() said. ==================== Link: https://patch.msgid.link/20241009072302.1754567-1-ruanjinjie@huawei.comSigned-off-by:
-
Jinjie Ruan authored
Since timespec64_valid() has been checked in higher layer pc_clock_settime(), the duplicate check in lan743x_ptpci_settime64() can be removed. Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
Jinjie Ruan <ruanjinjie@huawei.com> Link: https://patch.msgid.link/20241009072302.1754567-3-ruanjinjie@huawei.comSigned-off-by:
-
Jinjie Ruan authored
As Andrew pointed out, it will make sense that the PTP core checked timespec64 struct's tv_sec and tv_nsec range before calling ptp->info->settime64(). As the man manual of clock_settime() said, if tp.tv_sec is negative or tp.tv_nsec is outside the range [0..999,999,999], it should return EINVAL, which include dynamic clocks which handles PTP clock, and the condition is consistent with timespec64_valid(). As Thomas suggested, timespec64_valid() only check the timespec is valid, but not ensure that the time is in a valid range, so check it ahead using timespec64_valid_strict() in pc_clock_settime() and return -EINVAL if not valid. There are some drivers that use tp->tv_sec and tp->tv_nsec directly to write registers without validity checks and assume that the higher layer has checked it, which is dangerous and will benefit from this, such as hclge_ptp_settime(), igb_ptp_settime_i210(), _rcar_gen4_ptp_settime(), and some drivers can remove the checks of itself. Cc: stable@vger.kernel.org Fixes: 0606f422 ("posix clocks: Introduce dynamic clocks") Acked-by:
Andrew Lunn <andrew@lunn.ch> Suggested-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
- 14 Oct, 2024 1 commit
-
-
Jakub Kicinski authored
Andrew has been a pillar of the community for as long as I remember. Focusing on embedded networking, co-maintaining Ethernet PHYs and DSA code, but also actively reviewing MAC and integrated NIC drivers. Elevate Andrew to the status of co-maintainer of all netdev drivers. Acked-by:
Eric Dumazet <edumazet@google.com> Acked-by:
-
- 11 Oct, 2024 10 commits
-
-
Alessandro Zanni authored
This fix solves this error, when calling kselftest with targets "drivers/net": File "tools/testing/selftests/net/lib/py/nsim.py", line 64, in __init__ if e.errno == errno.ENOSPC: NameError: name 'errno' is not defined The error was found by running tests manually with the command: make kselftest TARGETS="drivers/net" The module errno makes available standard error system symbols. Reviewed-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
Alessandro Zanni <alessandro.zanni87@gmail.com> Link: https://patch.msgid.link/20241010183034.24739-1-alessandro.zanni87@gmail.comSigned-off-by:
-
Alessandro Zanni authored
This fix solves this error, when calling kselftest with targets "net/rds": The error was found by running tests manually with the command: make kselftest TARGETS="net/rds" The patch also specifies to import ip() function from the utils module. Signed-off-by:
Allison Henderson <allison.henderson@oracle.com> Link: https://patch.msgid.link/20241010194421.48198-1-alessandro.zanni87@gmail.comSigned-off-by:
-
Wei Fang authored
Fix the build warnings when CONFIG_FSL_ENETC_MDIO is not enabled. The detailed warnings are shown as follows. include/linux/fsl/enetc_mdio.h:62:18: warning: no previous prototype for function 'enetc_hw_alloc' [-Wmissing-prototypes] 62 | struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs) | ^ include/linux/fsl/enetc_mdio.h:62:1: note: declare 'static' if the function is not intended to be used outside of this translation unit 62 | struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs) | ^ | static 8 warnings generated. Fixes: 6517798d ("enetc: Make MDIO accessors more generic and export to include/linux/fsl") Cc: stable@vger.kernel.org Reported-by:kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202410102136.jQHZOcS4-lkp@intel.com/Signed-off-by:
Wei Fang <wei.fang@nxp.com> Reviewed-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20241011030103.392362-1-wei.fang@nxp.comSigned-off-by:
-
Jakub Kicinski authored
Wei Fang says: ==================== net: enetc: fix some issues of XDP We found some bugs when testing the XDP function of enetc driver, and these bugs are easy to reproduce. This is not only causes XDP to not work, but also the network cannot be restored after exiting the XDP program. So the patch set is mainly to fix these bugs. For details, please see the commit message of each patch. v1: https://lore.kernel.org/bpf/20240919084104.661180-1-wei.fang@nxp.com/ v2: https://lore.kernel.org/netdev/20241008224806.2onzkt3gbslw5jxb@skbuf/ v3: https://lore.kernel.org/imx/20241009090327.146461-1-wei.fang@nxp.com/ ==================== Link: https://patch.msgid.link/20241010092056.298128-1-wei.fang@nxp.comSigned-off-by:
-
Wei Fang authored
When running "xdp-bench tx eno0" to test the XDP_TX feature of ENETC on LS1028A, it was found that if the command was re-run multiple times, Rx could not receive the frames, and the result of xdp-bench showed that the rx rate was 0. root@ls1028ardb:~# ./xdp-bench tx eno0 Hairpinning (XDP_TX) packets on eno0 (ifindex 3; driver fsl_enetc) Summary 2046 rx/s 0 err,drop/s Summary 0 rx/s 0 err,drop/s Summary 0 rx/s 0 err,drop/s Summary 0 rx/s 0 err,drop/s By observing the Rx PIR and CIR registers, CIR is always 0x7FF and PIR is always 0x7FE, which means that the Rx ring is full and can no longer accommodate other Rx frames. Therefore, the problem is caused by the Rx BD ring not being cleaned up. Further analysis of the code revealed that the Rx BD ring will only be cleaned if the "cleaned_cnt > xdp_tx_in_flight" condition is met. Therefore, some debug logs were added to the driver and the current values of cleaned_cnt and xdp_tx_in_flight were printed when the Rx BD ring was full. The logs are as follows. [ 178.762419] [XDP TX] >> cleaned_cnt:1728, xdp_tx_in_flight:2140 [ 178.771387] [XDP TX] >> cleaned_cnt:1941, xdp_tx_in_flight:2110 [ 178.776058] [XDP TX] >> cleaned_cnt:1792, xdp_tx_in_flight:2110 From the results, the max value of xdp_tx_in_flight has reached 2140. However, the size of the Rx BD ring is only 2048. So xdp_tx_in_flight did not drop to 0 after enetc_stop() is called and the driver does not clear it. The root cause is that NAPI is disabled too aggressively, without having waited for the pending XDP_TX frames to be transmitted, and their buffers recycled, so that xdp_tx_in_flight cannot naturally drop to 0. Later, enetc_free_tx_ring() does free those stale, unsent XDP_TX packets, but it is not coded up to also reset xdp_tx_in_flight, hence the manifestation of the bug. One option would be to cover this extra condition in enetc_free_tx_ring(), but now that the ENETC_TX_DOWN exists, we have created a window at the beginning of enetc_stop() where NAPI can still be scheduled, but any concurrent enqueue will be blocked. Therefore, enetc_wait_bdrs() and enetc_disable_tx_bdrs() can be called with NAPI still scheduled, and it is guaranteed that this will not wait indefinitely, but instead give us an indication that the pending TX frames have orderly dropped to zero. Only then should we call napi_disable(). This way, enetc_free_tx_ring() becomes entirely redundant and can be dropped as part of subsequent cleanup. The change also refactors enetc_start() so that it looks like the mirror opposite procedure of enetc_stop(). Fixes: ff58fda0 ("net: enetc: prioritize ability to go down over packet processing") Cc: stable@vger.kernel.org Signed-off-by:
-
Wei Fang authored
The Tx BD rings are disabled first in enetc_stop() and the driver waits for them to become empty. This operation is not safe while the ring is actively transmitting frames, and will cause the ring to not be empty and hardware exception. As described in the NETC block guide, software should only disable an active Tx ring after all pending ring entries have been consumed (i.e. when PI = CI). Disabling a transmit ring that is actively processing BDs risks a HW-SW race hazard whereby a hardware resource becomes assigned to work on one or more ring entries only to have those entries be removed due to the ring becoming disabled. When testing XDP_REDIRECT feautre, although all frames were blocked from being put into Tx rings during ring reconfiguration, the similar warning log was still encountered: fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #6 clear fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #7 clear The reason is that when there are still unsent frames in the Tx ring, disabling the Tx ring causes the remaining frames to be unable to be sent out. And the Tx ring cannot be restored, which means that even if the xdp program is uninstalled, the Tx frames cannot be sent out anymore. Therefore, correct the operation order in enect_start() and enect_stop(). Fixes: ff58fda0 ("net: enetc: prioritize ability to go down over packet processing") Cc: stable@vger.kernel.org Signed-off-by:
-
Wei Fang authored
When testing the XDP_REDIRECT function on the LS1028A platform, we found a very reproducible issue that the Tx frames can no longer be sent out even if XDP_REDIRECT is turned off. Specifically, if there is a lot of traffic on Rx direction, when XDP_REDIRECT is turned on, the console may display some warnings like "timeout for tx ring #6 clear", and all redirected frames will be dropped, the detailed log is as follows. root@ls1028ardb:~# ./xdp-bench redirect eno0 eno2 Redirecting from eno0 (ifindex 3; driver fsl_enetc) to eno2 (ifindex 4; driver fsl_enetc) [203.849809] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #5 clear [204.006051] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #6 clear [204.161944] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #7 clear eno0->eno2 1420505 rx/s 1420590 err,drop/s 0 xmit/s xmit eno0->eno2 0 xmit/s 1420590 drop/s 0 drv_err/s 15.71 bulk-avg eno0->eno2 1420484 rx/s 1420485 err,drop/s 0 xmit/s xmit eno0->eno2 0 xmit/s 1420485 drop/s 0 drv_err/s 15.71 bulk-avg By analyzing the XDP_REDIRECT implementation of enetc driver, the driver will reconfigure Tx and Rx BD rings when a bpf program is installed or uninstalled, but there is no mechanisms to block the redirected frames when enetc driver reconfigures rings. Similarly, XDP_TX verdicts on received frames can also lead to frames being enqueued in the Tx rings. Because XDP ignores the state set by the netif_tx_wake_queue() API, so introduce the ENETC_TX_DOWN flag to suppress transmission of XDP frames. Fixes: c33bfaf9 ("net: enetc: set up XDP program under enetc_reconfigure()") Cc: stable@vger.kernel.org Signed-off-by:
-
Wei Fang authored
The xdp_drops statistic indicates the number of XDP frames dropped in the Rx direction. However, enetc_xdp_drop() is also used in XDP_TX and XDP_REDIRECT actions. If frame loss occurs in these two actions, the frames loss count should not be included in xdp_drops, because there are already xdp_tx_drops and xdp_redirect_failures to count the frame loss of these two actions, so it's better to remove xdp_drops statistic from enetc_xdp_drop() and increase xdp_drops in XDP_DROP action. Fixes: 7ed2bc80 ("net: enetc: add support for XDP_TX") Cc: stable@vger.kernel.org Signed-off-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by:
-
Daniel Machon authored
When port mirroring is added to a port, the bit position of the source port, needs to be written to the register ANA_AC_PROBE_PORT_CFG. This register is replicated for n_ports > 32, and therefore we need to derive the correct register from the port number. Before this patch, we wrongly calculate the register from portno / BITS_PER_BYTE, where the divisor ought to be 32, causing any port >=8 to be written to the wrong register. We fix this, by using do_div(), where the dividend is the register, the remainder is the bit position and the divisor is now 32. Fixes: 4e50d72b ("net: sparx5: add port mirroring implementation") Signed-off-by:
Daniel Machon <daniel.machon@microchip.com> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241009-mirroring-fix-v1-1-9ec962301989@microchip.comSigned-off-by:
-
Xin Long authored
After commit 8d7017fd ("blackhole_netdev: use blackhole_netdev to invalidate dst entries"), blackhole_netdev was introduced to invalidate dst cache entries on the TX path whenever the cache times out or is flushed. When two UDP sockets (sk1 and sk2) send messages to the same destination simultaneously, they are using the same dst cache. If the dst cache is invalidated on one path (sk2) while the other (sk1) is still transmitting, sk1 may try to use the invalid dst entry. CPU1 CPU2 udp_sendmsg(sk1) udp_sendmsg(sk2) udp_send_skb() ip_output() <--- dst timeout or flushed dst_dev_put() ip_finish_output2() ip_neigh_for_gw() This results in a scenario where ip_neigh_for_gw() returns -EINVAL because blackhole_dev lacks an in_dev, which is needed to initialize the neigh in arp_constructor(). This error is then propagated back to userspace, breaking the UDP application. The patch fixes this issue by assigning an in_dev to blackhole_dev for IPv4, similar to what was done for IPv6 in commit e5f80fcf ("ipv6: give an IPv6 dev to blackhole_netdev"). This ensures that even when the dst entry is invalidated with blackhole_dev, it will not fail to create the neigh entry. As devinet_init() is called ealier than blackhole_netdev_init() in system booting, it can not assign the in_dev to blackhole_dev in devinet_init(). As Paolo suggested, add a separate late_initcall() in devinet.c to ensure inet_blackhole_dev_init() is called after blackhole_netdev_init(). Fixes: 8d7017fd ("blackhole_netdev: use blackhole_netdev to invalidate dst entries") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Reviewed-by:
-
- 10 Oct, 2024 24 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth and netfilter. Current release - regressions: - dsa: sja1105: fix reception from VLAN-unaware bridges - Revert "net: stmmac: set PP_FLAG_DMA_SYNC_DEV only if XDP is enabled" - eth: fec: don't save PTP state if PTP is unsupported Current release - new code bugs: - smc: fix lack of icsk_syn_mss with IPPROTO_SMC, prevent null-deref - eth: airoha: update Tx CPU DMA ring idx at the end of xmit loop - phy: aquantia: AQR115c fix up PMA capabilities Previous releases - regressions: - tcp: 3 fixes for retrans_stamp and undo logic Previous releases - always broken: - net: do not delay dst_entries_add() in dst_release() - netfilter: restrict xtables extensions to families that are safe, syzbot found a way to combine ebtables with extensions that are never used by userspace tools - sctp: ensure sk_state is set to CLOSED if hashing fails in sctp_listen_start - mptcp: handle consistently DSS corruption, and prevent corruption due to large pmtu xmit" * tag 'net-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits) MAINTAINERS: Add headers and mailing list to UDP section MAINTAINERS: consistently exclude wireless files from NETWORKING [GENERAL] slip: make slhc_remember() more robust against malicious packets net/smc: fix lacks of icsk_syn_mss with IPPROTO_SMC ppp: fix ppp_async_encode() illegal access docs: netdev: document guidance on cleanup patches phonet: Handle error of rtnl_register_module(). mpls: Handle error of rtnl_register_module(). mctp: Handle error of rtnl_register_module(). bridge: Handle error of rtnl_register_module(). vxlan: Handle error of rtnl_register_module(). rtnetlink: Add bulk registration helpers for rtnetlink message handlers. net: do not delay dst_entries_add() in dst_release() mptcp: pm: do not remove closing subflows mptcp: fallback when MPTCP opts are dropped after 1st data tcp: fix mptcp DSS corruption due to large pmtu xmit mptcp: handle consistently DSS corruption net: netconsole: fix wrong warning net: dsa: refuse cross-chip mirroring operations net: fec: don't save PTP state if PTP is unsupported ... -
Linus Torvalds authored
Merge tag 'trace-ringbuffer-v6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fix from Steven Rostedt: "Ring-buffer fix: do not have boot-mapped buffers use CPU hotplug callbacks When a ring buffer is mapped to memory assigned at boot, it also splits it up evenly between the possible CPUs. But the allocation code still attached a CPU notifier callback to this ring buffer. When a CPU is added, the callback will happen and another per-cpu buffer is created for the ring buffer. But for boot mapped buffers, there is no room to add another one (as they were all created already). The result of calling the CPU hotplug notifier on a boot mapped ring buffer is unpredictable and could lead to a system crash. If the ring buffer is boot mapped simply do not attach the CPU notifier to it" * tag 'trace-ringbuffer-v6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: ring-buffer: Do not have boot mapped buffers hook to CPU hotplug
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: - update fstrim loop and add more cancellation points, fix reported delayed or blocked suspend if there's a huge chunk queued - fix error handling in recent qgroup xarray conversion - in zoned mode, fix warning printing device path without RCU protection - again fix invalid extent xarray state (6252690f), lost due to refactoring * tag 'for-6.12-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix clear_dirty and writeback ordering in submit_one_sector() btrfs: zoned: fix missing RCU locking in error message when loading zone info btrfs: fix missing error handling when adding delayed ref with qgroups enabled btrfs: add cancellation points to trim loops btrfs: split remaining space to discard in chunks
-
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linuxLinus Torvalds authored
Pull nfsd fixes from Chuck Lever: - Fix NFSD bring-up / shutdown - Fix a UAF when releasing a stateid * tag 'nfsd-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: nfsd: fix possible badness in FREE_STATEID nfsd: nfsd_destroy_serv() must call svc_destroy() even if nfsd_startup_net() failed NFSD: Mark filecache "down" if init fails
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Carlos Maiolino: - A few small typo fixes - fstests xfs/538 DEBUG-only fix - Performance fix on blockgc on COW'ed files, by skipping trims on cowblock inodes currently opened for write - Prevent cowblocks to be freed under dirty pagecache during unshare - Update MAINTAINERS file to quote the new maintainer * tag 'xfs-6.12-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: fix a typo xfs: don't free cowblocks from under dirty pagecache on unshare xfs: skip background cowblock trims on inodes open for write xfs: support lowmode allocations in xfs_bmap_exact_minlen_extent_alloc xfs: call xfs_bmap_exact_minlen_extent_alloc from xfs_bmap_btalloc xfs: don't ifdef around the exact minlen allocations xfs: fold xfs_bmap_alloc_userdata into xfs_bmapi_allocate xfs: distinguish extra split from real ENOSPC from xfs_attr_node_try_addname xfs: distinguish extra split from real ENOSPC from xfs_attr3_leaf_split xfs: return bool from xfs_attr3_leaf_add xfs: merge xfs_attr_leaf_try_add into xfs_attr_leaf_addname xfs: Use try_cmpxchg() in xlog_cil_insert_pcp_aggregate() xfs: scrub: convert comma to semicolon xfs: Remove empty declartion in header file MAINTAINERS: add Carlos Maiolino as XFS release manager
-
Jakub Kicinski authored
Simon Horman says: ==================== MAINTAINERS: Networking file coverage updates The aim of this proposal is to make the handling of some files, related to Networking and Wireless, more consistently. It does so by: 1. Adding some more headers to the UDP section, making it consistent with the TCP section. 2. Excluding some files relating to Wireless from NETWORKING [GENERAL], making their handling consistent with other files related to Wireless. The aim of this is to make things more consistent. And for MAINTAINERS to better reflect the situation on the ground. I am more than happy to be told that the current state of affairs is fine. Or for other ideas to be discussed. v1: https://lore.kernel.org/20241004-maint-net-hdrs-v1-0-41fd555aacc5@kernel.org ==================== Link: https://patch.msgid.link/20241009-maint-net-hdrs-v2-0-f2c86e7309c8@kernel.orgSigned-off-by:
-
Simon Horman authored
Add netdev mailing list and some more udp.h headers to the UDP section. This is now more consistent with the TCP section. Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Simon Horman authored
We already exclude wireless drivers from the netdev@ traffic, to delegate it to linux-wireless@, and avoid overwhelming netdev@. Many of the following wireless-related sections MAINTAINERS are already not included in the NETWORKING [GENERAL] section. For consistency, exclude those that are. * 802.11 (including CFG80211/NL80211) * MAC80211 * RFKILL Acked-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Eric Dumazet authored
syzbot found that slhc_remember() was missing checks against malicious packets [1]. slhc_remember() only checked the size of the packet was at least 20, which is not good enough. We need to make sure the packet includes the IPv4 and TCP header that are supposed to be carried. Add iph and th pointers to make the code more readable. [1] BUG: KMSAN: uninit-value in slhc_remember+0x2e8/0x7b0 drivers/net/slip/slhc.c:666 slhc_remember+0x2e8/0x7b0 drivers/net/slip/slhc.c:666 ppp_receive_nonmp_frame+0xe45/0x35e0 drivers/net/ppp/ppp_generic.c:2455 ppp_receive_frame drivers/net/ppp/ppp_generic.c:2372 [inline] ppp_do_recv+0x65f/0x40d0 drivers/net/ppp/ppp_generic.c:2212 ppp_input+0x7dc/0xe60 drivers/net/ppp/ppp_generic.c:2327 pppoe_rcv_core+0x1d3/0x720 drivers/net/ppp/pppoe.c:379 sk_backlog_rcv+0x13b/0x420 include/net/sock.h:1113 __release_sock+0x1da/0x330 net/core/sock.c:3072 release_sock+0x6b/0x250 net/core/sock.c:3626 pppoe_sendmsg+0x2b8/0xb90 drivers/net/ppp/pppoe.c:903 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:744 ____sys_sendmsg+0x903/0xb60 net/socket.c:2602 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656 __sys_sendmmsg+0x3c1/0x960 net/socket.c:2742 __do_sys_sendmmsg net/socket.c:2771 [inline] __se_sys_sendmmsg net/socket.c:2768 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768 x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4091 [inline] slab_alloc_node mm/slub.c:4134 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4186 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:587 __alloc_skb+0x363/0x7b0 net/core/skbuff.c:678 alloc_skb include/linux/skbuff.h:1322 [inline] sock_wmalloc+0xfe/0x1a0 net/core/sock.c:2732 pppoe_sendmsg+0x3a7/0xb90 drivers/net/ppp/pppoe.c:867 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:744 ____sys_sendmsg+0x903/0xb60 net/socket.c:2602 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656 __sys_sendmmsg+0x3c1/0x960 net/socket.c:2742 __do_sys_sendmmsg net/socket.c:2771 [inline] __se_sys_sendmmsg net/socket.c:2768 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768 x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 0 UID: 0 PID: 5460 Comm: syz.2.33 Not tainted 6.12.0-rc2-syzkaller-00006-g87d6aab2 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Fixes: b5451d78 ("slip: Move the SLIP drivers") Reported-by: syzbot+2ada1bc857496353be5a@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/670646db.050a0220.3f80e.0027.GAE@google.com/T/#uSigned-off-by:
-
D. Wythe authored
Eric report a panic on IPPROTO_SMC, and give the facts that when INET_PROTOSW_ICSK was set, icsk->icsk_sync_mss must be set too. Bug: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x0000000086000005 EC = 0x21: IABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault user pgtable: 4k pages, 48-bit VAs, pgdp=00000001195d1000 [0000000000000000] pgd=0800000109c46003, p4d=0800000109c46003, pud=0000000000000000 Internal error: Oops: 0000000086000005 [#1] PREEMPT SMP Modules linked in: CPU: 1 UID: 0 PID: 8037 Comm: syz.3.265 Not tainted 6.11.0-rc7-syzkaller-g5f5673607153 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : 0x0 lr : cipso_v4_sock_setattr+0x2a8/0x3c0 net/ipv4/cipso_ipv4.c:1910 sp : ffff80009b887a90 x29: ffff80009b887aa0 x28: ffff80008db94050 x27: 0000000000000000 x26: 1fffe0001aa6f5b3 x25: dfff800000000000 x24: ffff0000db75da00 x23: 0000000000000000 x22: ffff0000d8b78518 x21: 0000000000000000 x20: ffff0000d537ad80 x19: ffff0000d8b78000 x18: 1fffe000366d79ee x17: ffff8000800614a8 x16: ffff800080569b84 x15: 0000000000000001 x14: 000000008b336894 x13: 00000000cd96feaa x12: 0000000000000003 x11: 0000000000040000 x10: 00000000000020a3 x9 : 1fffe0001b16f0f1 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 000000000000003f x5 : 0000000000000040 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 0000000000000002 x1 : 0000000000000000 x0 : ffff0000d8b78000 Call trace: 0x0 netlbl_sock_setattr+0x2e4/0x338 net/netlabel/netlabel_kapi.c:1000 smack_netlbl_add+0xa4/0x154 security/smack/smack_lsm.c:2593 smack_socket_post_create+0xa8/0x14c security/smack/smack_lsm.c:2973 security_socket_post_create+0x94/0xd4 security/security.c:4425 __sock_create+0x4c8/0x884 net/socket.c:1587 sock_create net/socket.c:1622 [inline] __sys_socket_create net/socket.c:1659 [inline] __sys_socket+0x134/0x340 net/socket.c:1706 __do_sys_socket net/socket.c:1720 [inline] __se_sys_socket net/socket.c:1718 [inline] __arm64_sys_socket+0x7c/0x94 net/socket.c:1718 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:712 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 Code: ???????? ???????? ???????? ???????? (????????) ---[ end trace 0000000000000000 ]--- This patch add a toy implementation that performs a simple return to prevent such panic. This is because MSS can be set in sock_create_kern or smc_setsockopt, similar to how it's done in AF_SMC. However, for AF_SMC, there is currently no way to synchronize MSS within __sys_connect_file. This toy implementation lays the groundwork for us to support such feature for IPPROTO_SMC in the future. Fixes: d25a92cc ("net/smc: Introduce IPPROTO_SMC") Reported-by:
D. Wythe <alibuda@linux.alibaba.com> Reviewed-by:
-
Eric Dumazet authored
syzbot reported an issue in ppp_async_encode() [1] In this case, pppoe_sendmsg() is called with a zero size. Then ppp_async_encode() is called with an empty skb. BUG: KMSAN: uninit-value in ppp_async_encode drivers/net/ppp/ppp_async.c:545 [inline] BUG: KMSAN: uninit-value in ppp_async_push+0xb4f/0x2660 drivers/net/ppp/ppp_async.c:675 ppp_async_encode drivers/net/ppp/ppp_async.c:545 [inline] ppp_async_push+0xb4f/0x2660 drivers/net/ppp/ppp_async.c:675 ppp_async_send+0x130/0x1b0 drivers/net/ppp/ppp_async.c:634 ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2280 [inline] ppp_input+0x1f1/0xe60 drivers/net/ppp/ppp_generic.c:2304 pppoe_rcv_core+0x1d3/0x720 drivers/net/ppp/pppoe.c:379 sk_backlog_rcv+0x13b/0x420 include/net/sock.h:1113 __release_sock+0x1da/0x330 net/core/sock.c:3072 release_sock+0x6b/0x250 net/core/sock.c:3626 pppoe_sendmsg+0x2b8/0xb90 drivers/net/ppp/pppoe.c:903 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:744 ____sys_sendmsg+0x903/0xb60 net/socket.c:2602 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656 __sys_sendmmsg+0x3c1/0x960 net/socket.c:2742 __do_sys_sendmmsg net/socket.c:2771 [inline] __se_sys_sendmmsg net/socket.c:2768 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768 x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4092 [inline] slab_alloc_node mm/slub.c:4135 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4187 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:587 __alloc_skb+0x363/0x7b0 net/core/skbuff.c:678 alloc_skb include/linux/skbuff.h:1322 [inline] sock_wmalloc+0xfe/0x1a0 net/core/sock.c:2732 pppoe_sendmsg+0x3a7/0xb90 drivers/net/ppp/pppoe.c:867 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:744 ____sys_sendmsg+0x903/0xb60 net/socket.c:2602 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656 __sys_sendmmsg+0x3c1/0x960 net/socket.c:2742 __do_sys_sendmmsg net/socket.c:2771 [inline] __se_sys_sendmmsg net/socket.c:2768 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768 x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 1 UID: 0 PID: 5411 Comm: syz.1.14 Not tainted 6.12.0-rc1-syzkaller-00165-g360c1f1f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: syzbot+1d121645899e7692f92a@syzkaller.appspotmail.com Signed-off-by:
-
Simon Horman authored
The purpose of this section is to document what is the current practice regarding clean-up patches which address checkpatch warnings and similar problems. I feel there is a value in having this documented so others can easily refer to it. Clearly this topic is subjective. And to some extent the current practice discourages a wider range of patches than is described here. But I feel it is best to start somewhere, with the most well established part of the current practice. Signed-off-by:
-
Paolo Abeni authored
Kuniyuki Iwashima says: ==================== rtnetlink: Handle error of rtnl_register_module(). While converting phonet to per-netns RTNL, I found a weird comment /* Further rtnl_register_module() cannot fail */ that was true but no longer true after commit addf9b90 ("net: rtnetlink: use rcu to free rtnl message handlers"). Many callers of rtnl_register_module() just ignore the returned value but should handle them properly. This series introduces two helpers, rtnl_register_many() and rtnl_unregister_many(), to do that easily and fix such callers. All rtnl_register() and rtnl_register_module() will be converted to _many() variant and some rtnl_lock() will be saved in _many() later in net-next. Changes: v4: * Add more context in changelog of each patch v3: https://lore.kernel.org/all/20241007124459.5727-1-kuniyu@amazon.com/ * Move module *owner to struct rtnl_msg_handler * Make struct rtnl_msg_handler args/vars const * Update mctp goto labels v2: https://lore.kernel.org/netdev/20241004222358.79129-1-kuniyu@amazon.com/ * Remove __exit from mctp_neigh_exit(). v1: https://lore.kernel.org/netdev/20241003205725.5612-1-kuniyu@amazon.com/ ==================== Link: https://patch.msgid.link/20241008184737.9619-1-kuniyu@amazon.comSigned-off-by:
-
Kuniyuki Iwashima authored
Before commit addf9b90 ("net: rtnetlink: use rcu to free rtnl message handlers"), once the first rtnl_register_module() allocated rtnl_msg_handlers[PF_PHONET], the following calls never failed. However, after the commit, rtnl_register_module() could fail silently to allocate rtnl_msg_handlers[PF_PHONET][msgtype] and requires error handling for each call. Handling the error allows users to view a module as an all-or-nothing thing in terms of the rtnetlink functionality. This prevents syzkaller from reporting spurious errors from its tests, where OOM often occurs and module is automatically loaded. Let's use rtnl_register_many() to handle the errors easily. Fixes: addf9b90 ("net: rtnetlink: use rcu to free rtnl message handlers") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by:
Rémi Denis-Courmont <courmisch@gmail.com> Signed-off-by:
-
Kuniyuki Iwashima authored
Since introduced, mpls_init() has been ignoring the returned value of rtnl_register_module(), which could fail silently. Handling the error allows users to view a module as an all-or-nothing thing in terms of the rtnetlink functionality. This prevents syzkaller from reporting spurious errors from its tests, where OOM often occurs and module is automatically loaded. Let's handle the errors by rtnl_register_many(). Fixes: 03c05665 ("mpls: Netlink commands to add, remove, and dump routes") Signed-off-by:
-
Kuniyuki Iwashima authored
Since introduced, mctp has been ignoring the returned value of rtnl_register_module(), which could fail silently. Handling the error allows users to view a module as an all-or-nothing thing in terms of the rtnetlink functionality. This prevents syzkaller from reporting spurious errors from its tests, where OOM often occurs and module is automatically loaded. Let's handle the errors by rtnl_register_many(). Fixes: 583be982 ("mctp: Add device handling and netlink interface") Fixes: 831119f8 ("mctp: Add neighbour netlink interface") Fixes: 06d2f4c5 ("mctp: Add netlink route management") Signed-off-by:
Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by:
-
Kuniyuki Iwashima authored
Since introduced, br_vlan_rtnl_init() has been ignoring the returned value of rtnl_register_module(), which could fail silently. Handling the error allows users to view a module as an all-or-nothing thing in terms of the rtnetlink functionality. This prevents syzkaller from reporting spurious errors from its tests, where OOM often occurs and module is automatically loaded. Let's handle the errors by rtnl_register_many(). Fixes: 8dcea187 ("net: bridge: vlan: add rtm definitions and dump support") Fixes: f26b2965 ("net: bridge: vlan: add new rtm message support") Fixes: adb3ce9b ("net: bridge: vlan: add del rtm message support") Signed-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
-
Kuniyuki Iwashima authored
Since introduced, vxlan_vnifilter_init() has been ignoring the returned value of rtnl_register_module(), which could fail silently. Handling the error allows users to view a module as an all-or-nothing thing in terms of the rtnetlink functionality. This prevents syzkaller from reporting spurious errors from its tests, where OOM often occurs and module is automatically loaded. Let's handle the errors by rtnl_register_many(). Fixes: f9c4bb0b ("vxlan: vni filtering support on collect metadata device") Signed-off-by:
-
Kuniyuki Iwashima authored
Before commit addf9b90 ("net: rtnetlink: use rcu to free rtnl message handlers"), once rtnl_msg_handlers[protocol] was allocated, the following rtnl_register_module() for the same protocol never failed. However, after the commit, rtnl_msg_handler[protocol][msgtype] needs to be allocated in each rtnl_register_module(), so each call could fail. Many callers of rtnl_register_module() do not handle the returned error, and we need to add many error handlings. To handle that easily, let's add wrapper functions for bulk registration of rtnetlink message handlers. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfPaolo Abeni authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Restrict xtables extensions to families that are safe, syzbot found a way to combine ebtables with extensions that are never used by userspace tools. From Florian Westphal. 2) Set l3mdev inconditionally whenever possible in nft_fib to fix lookup mismatch, also from Florian. netfilter pull request 24-10-09 * tag 'nf-24-10-09' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: selftests: netfilter: conntrack_vrf.sh: add fib test case netfilter: fib: check correct rtable in vrf setups netfilter: xtables: avoid NFPROTO_UNSPEC where needed ==================== Link: https://patch.msgid.link/20241009213858.3565808-1-pablo@netfilter.orgSigned-off-by:
-
Eric Dumazet authored
dst_entries_add() uses per-cpu data that might be freed at netns dismantle from ip6_route_net_exit() calling dst_entries_destroy() Before ip6_route_net_exit() can be called, we release all the dsts associated with this netns, via calls to dst_release(), which waits an rcu grace period before calling dst_destroy() dst_entries_add() use in dst_destroy() is racy, because dst_entries_destroy() could have been called already. Decrementing the number of dsts must happen sooner. Notes: 1) in CONFIG_XFRM case, dst_destroy() can call dst_release_immediate(child), this might also cause UAF if the child does not have DST_NOCOUNT set. IPSEC maintainers might take a look and see how to address this. 2) There is also discussion about removing this count of dst, which might happen in future kernels. Fixes: f8864972 ("ipv4: fix dst race in sk_dst_get()") Closes: https://lore.kernel.org/lkml/CANn89iLCCGsP7SFn9HKpvnKu96Td4KD08xf7aGtiYgZnkjaL=w@mail.gmail.com/T/Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-10-08 (ice, i40e, igb, e1000e) This series contains updates to ice, i40e, igb, and e1000e drivers. For ice: Marcin allows driver to load, into safe mode, when DDP package is missing or corrupted and adjusts the netif_is_ice() check to account for when the device is in safe mode. He also fixes an out-of-bounds issue when MSI-X are increased for VFs. Wojciech clears FDB entries on reset to match the hardware state. For i40e: Aleksandr adds locking around MACVLAN filters to prevent memory leaks due to concurrency issues. For igb: Mohamed Khalfella adds a check to not attempt to bring up an already running interface on non-fatal PCIe errors. For e1000e: Vitaly changes board type for I219 to more closely match the hardware and stop PHY issues. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: e1000e: change I219 (19) devices to ADP igb: Do not bring the device up after non-fatal error i40e: Fix macvlan leak by synchronizing access to mac_filter_hash ice: Fix increasing MSI-X on VF ice: Flush FDB entries before reset ice: Fix netif_is_ice() in Safe Mode ice: Fix entering Safe Mode ==================== Link: https://patch.msgid.link/20241008230050.928245-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Jakub Kicinski authored
Matthieu Baerts says: ==================== mptcp: misc. fixes involving fallback to TCP - Patch 1: better handle DSS corruptions from a bugged peer: reducing warnings, doing a fallback or a reset depending on the subflow state. For >= v5.7. - Patch 2: fix DSS corruption due to large pmtu xmit, where MPTCP was not taken into account. For >= v5.6. - Patch 3: fallback when MPTCP opts are dropped after the first data packet, instead of resetting the connection. For >= v5.6. - Patch 4: restrict the removal of a subflow to other closing states, a better fix, for a recent one. For >= v5.10. ==================== Link: https://patch.msgid.link/20241008-net-mptcp-fallback-fixes-v1-0-c6fb8e93e551@kernel.orgSigned-off-by:
-
Matthieu Baerts (NGI0) authored
In a previous fix, the in-kernel path-manager has been modified not to retrigger the removal of a subflow if it was already closed, e.g. when the initial subflow is removed, but kept in the subflows list. To be complete, this fix should also skip the subflows that are in any closing state: mptcp_close_ssk() will initiate the closure, but the switch to the TCP_CLOSE state depends on the other peer. Fixes: 58e1b66b ("mptcp: pm: do not remove already closed subflows") Cc: stable@vger.kernel.org Suggested-by:
Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241008-net-mptcp-fallback-fixes-v1-4-c6fb8e93e551@kernel.orgSigned-off-by:
-
