- 13 Jul, 2011 4 commits
-
-
Thomas Gleixner authored
commit b5199515 upstream. The clocksource watchdog code is interruptible and it has been observed that this can trigger false positives which disable the TSC. The reason is that an interrupt storm or a long running interrupt handler between the read of the watchdog source and the read of the TSC brings the two far enough apart that the delta is larger than the unstable treshold. Move both reads into a short interrupt disabled region to avoid that. Reported-and-tested-by:
Vernon Mauery <vernux@us.ibm.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Stefano Stabellini authored
commit a91d9287 upstream. We only need to set max_pfn_mapped to the last pfn mapped on x86_64 to make sure that cleanup_highmap doesn't remove important mappings at _end. We don't need to do this on x86_32 because cleanup_highmap is not called on x86_32. Besides lowering max_pfn_mapped on x86_32 has the unwanted side effect of limiting the amount of memory available for the 1:1 kernel pagetable allocation. This patch reverts the x86_32 part of the original patch. Signed-off-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Andrea Arcangeli authored
commit 99a15e21 upstream. swapcache will reach the below code path in migrate_page_move_mapping, and swapcache is accounted as NR_FILE_PAGES but it's not accounted as NR_SHMEM. Hugh pointed out we must use PageSwapCache instead of comparing mapping to &swapper_space, to avoid build failure with CONFIG_SWAP=n. Signed-off-by:
Andrea Arcangeli <aarcange@redhat.com> Acked-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Hugh Dickins authored
commit 2b472611 upstream. Andrea Righi reported a case where an exiting task can race against ksmd::scan_get_next_rmap_item (http://lkml.org/lkml/2011/6/1/742) easily triggering a NULL pointer dereference in ksmd. ksm_scan.mm_slot == &ksm_mm_head with only one registered mm CPU 1 (__ksm_exit) CPU 2 (scan_get_next_rmap_item) list_empty() is false lock slot == &ksm_mm_head list_del(slot->mm_list) (list now empty) unlock lock slot = list_entry(slot->mm_list.next) (list is empty, so slot is still ksm_mm_head) unlock slot->mm == NULL ... Oops Close this race by revalidating that the new slot is not simply the list head again. Andrea's test case: #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <sys/mman.h> #define BUFSIZE getpagesize() int main(int argc, char **argv) { void *ptr; if (posix_memalign(&ptr, getpagesize(), BUFSIZE) < 0) { perror("posix_memalign"); exit(1); } if (madvise(ptr, BUFSIZE, MADV_MERGEABLE) < 0) { perror("madvise"); exit(1); } *(char *)NULL = 0; return 0; } Reported-by:
Andrea Righi <andrea@betterlinux.com> Tested-by:
Chris Wright <chrisw@sous-sol.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
- 23 Jun, 2011 36 commits
-
-
Greg Kroah-Hartman authored
-
Greg Kroah-Hartman authored
This reverts commit 6f63415f. It turns out this is not what we want to have happen for the .32 and .33-longterm kernels as it does not work properly at all. This was reported by Gentoo, Arch, and Canonical developers as causing problems for their users: https://bugs.archlinux.org/task/24302 http://bugs.gentoo.org/show_bug.cgi?id=359445 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/796336 Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Gordon Malm <gengor@gentoo.org> Cc: Don Fry <donald.h.fry@intel.com> Cc: Wey-Yi Guy <wey-yi.w.guy@intel.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Kasper Pedersen authored
commit a386b5af upstream. When the clocksource is not a multiple of HZ, the clock will be off. For acpi_pm, HZ=1000 the error is 127.111 ppm: The rounding of cycle_interval ends up generating a false error term in ntp_error accumulation since xtime_interval is not exactly 1/HZ. So, we subtract out the error caused by the rounding. This has been visible since 2.6.32-rc2 commit a092ff0f time: Implement logarithmic time accumulation That commit raised NTP_INTERVAL_FREQ and exposed the rounding error. testing tool: http://n1.taur.dk/permanent/testpmt.c Also tested with ntpd and a frequency counter. Signed-off-by:
Kasper Pedersen <kkp2010@kasperkp.dk> Acked-by:
john stultz <johnstul@us.ibm.com> Cc: John Kacur <jkacur@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Will Tisdale <willtisdale@gmail.com> Signed-off-by:
-
Thomas Gleixner authored
commit 676dc3cf upstream. Mark the IRQF_NO_SUSPEND interrupts IRQF_FORCE_RESUME and remove the extra walk through the interrupt descriptors. Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
-
Thomas Gleixner authored
commit dc5f219e upstream. Xen needs to reenable interrupts which are marked IRQF_NO_SUSPEND in the resume path. Add a flag to force the reenabling in the resume code. Tested-and-acked-by:
Ian Campbell <Ian.Campbell@eu.citrix.com> Signed-off-by:
-
Ian Campbell authored
commit 6903591f upstream. The IRQ core code will take care of disabling and reenabling interrupts over suspend resume automatically, therefore we do not need to do this in the Xen event channel code. The only exception is those event channels marked IRQF_NO_SUSPEND which the IRQ core ignores. We must unmask these ourselves, taking care to obey the current IRQ_DISABLED status. Failure check for IRQ_DISABLED leads to enabling polled only event channels, such as that associated with the pv spinlocks, which must never be enabled: [ 21.970432] ------------[ cut here ]------------ [ 21.970432] kernel BUG at arch/x86/xen/spinlock.c:343! [ 21.970432] invalid opcode: 0000 [#1] SMP [ 21.970432] last sysfs file: /sys/devices/virtual/net/lo/operstate [ 21.970432] Modules linked in: [ 21.970432] [ 21.970432] Pid: 0, comm: swapper Not tainted (2.6.32.24-x86_32p-xen-01034-g787c727 #34) [ 21.970432] EIP: 0061:[<c102e209>] EFLAGS: 00010046 CPU: 3 [ 21.970432] EIP is at dummy_handler+0x3/0x7 [ 21.970432] EAX: 0000021c EBX: dfc16880 ECX: 0000001a EDX: 00000000 [ 21.970432] ESI: dfc02c00 EDI: 00000001 EBP: dfc47e10 ESP: dfc47e10 [ 21.970432] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0069 [ 21.970432] Process swapper (pid: 0, ti=dfc46000 task=dfc39440 task.ti=dfc46000) [ 21.970432] Stack: [ 21.970432] dfc47e30 c10a39f0 0000021c 00000000 00000000 dfc16880 0000021c 00000001 [ 21.970432] <0> dfc47e40 c10a4f08 0000021c 00000000 dfc47e78 c12240a7 c1839284 c1839284 [ 21.970432] <0> 00000200 00000000 00000000 f5720000 c1f3d028 c1f3d02c 00000180 dfc47e90 [ 21.970432] Call Trace: [ 21.970432] [<c10a39f0>] ? handle_IRQ_event+0x5f/0x122 [ 21.970432] [<c10a4f08>] ? handle_percpu_irq+0x2f/0x55 [ 21.970432] [<c12240a7>] ? __xen_evtchn_do_upcall+0xdb/0x15f [ 21.970432] [<c122481e>] ? xen_evtchn_do_upcall+0x20/0x30 [ 21.970432] [<c1030d47>] ? xen_do_upcall+0x7/0xc [ 21.970432] [<c102007b>] ? apic_reg_read+0xd3/0x22d [ 21.970432] [<c1002227>] ? hypercall_page+0x227/0x1005 [ 21.970432] [<c102d30b>] ? xen_force_evtchn_callback+0xf/0x14 [ 21.970432] [<c102da7c>] ? check_events+0x8/0xc [ 21.970432] [<c102da3b>] ? xen_irq_enable_direct_end+0x0/0x1 [ 21.970432] [<c105e485>] ? finish_task_switch+0x62/0xba [ 21.970432] [<c14e3f84>] ? schedule+0x808/0x89d [ 21.970432] [<c1084dc5>] ? hrtimer_start_expires+0x1a/0x22 [ 21.970432] [<c1085154>] ? tick_nohz_restart_sched_tick+0x15a/0x162 [ 21.970432] [<c102f43a>] ? cpu_idle+0x6d/0x6f [ 21.970432] [<c14db29e>] ? cpu_bringup_and_idle+0xd/0xf [ 21.970432] Code: 5d 0f 95 c0 0f b6 c0 c3 55 66 83 78 02 00 89 e5 5d 0f 95 \ c0 0f b6 c0 c3 55 b2 01 86 10 31 c0 84 d2 89 e5 0f 94 c0 5d c3 55 89 e5 <0f> 0b \ eb fe 55 80 3d 4c ce 84 c1 00 89 e5 57 56 89 c6 53 74 15 [ 21.970432] EIP: [<c102e209>] dummy_handler+0x3/0x7 SS:ESP 0069:dfc47e10 [ 21.970432] ---[ end trace c0b71f7e12cf3011 ]--- Signed-off-by:
Ian Campbell <ian.campbell@citrix.com> Signed-off-by:
Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by:
-
Fernando Luis Vazquez Cao authored
commit 1ed2f73d upstream. The mask indicates the bits one wants to zero out, so it needs to be inverted before applying to the original TOS field. Signed-off-by:
Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Fernando Luis Vazquez Cao authored
commit 4319cc0c upstream. The IPv6 header is not zeroed out in alloc_skb so we must initialize it properly unless we want to see IPv6 packets with random TOS fields floating around. The current implementation resets the flow label but this could be changed if deemed necessary. We stumbled upon this issue when trying to apply a mangle rule to the RST packet generated by the REJECT target module. Signed-off-by:
-
Mathias Krause authored
commit dac853ae upstream. Unconditionally changing the address limit to USER_DS and not restoring it to its old value in the error path is wrong because it prevents us using kernel memory on repeated calls to this function. This, in fact, breaks the fallback of hard coded paths to the init program from being ever successful if the first candidate fails to load. With this patch applied switching to USER_DS is delayed until the point of no return is reached which makes it possible to have a multi-arch rootfs with one arch specific init binary for each of the (hard coded) probed paths. Since the address limit is already set to USER_DS when start_thread() will be invoked, this redundancy can be safely removed. Signed-off-by:
Mathias Krause <minipli@googlemail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Johannes Weiner authored
commit 081003ff upstream. When marking an inode reclaimable, a per-AG counter is increased, the inode is tagged reclaimable in its per-AG tree, and, when this is the first reclaimable inode in the AG, the AG entry in the per-mount tree is also tagged. When an inode is finally reclaimed, however, it is only deleted from the per-AG tree. Neither the counter is decreased, nor is the parent tree's AG entry untagged properly. Since the tags in the per-mount tree are not cleared, the inode shrinker iterates over all AGs that have had reclaimable inodes at one point in time. The counters on the other hand signal an increasing amount of slab objects to reclaim. Since "70e60ce7 xfs: convert inode shrinker to per-filesystem context" this is not a real issue anymore because the shrinker bails out after one iteration. But the problem was observable on a machine running v2.6.34, where the reclaimable work increased and each process going into direct reclaim eventually got stuck on the xfs inode shrinking path, trying to scan several million objects. Fix this by properly unwinding the reclaimable-state tracking of an inode when it is reclaimed. Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Alex Elder <aelder@sgi.com> Backported-by:
Stefan Priebe <s.priebe@profihost.ag> Signed-off-by:
-
Bjorn Helgaas authored
commit b7b30de5 upstream. Previously, we assumed the only Device object immediately below the root was the \_SB Scope (which the ACPI CA treats as a Device), so we forced the HID of all such objects to ACPI_BUS_HID ("LNXSYBUS"). However, there are DSDTs that supply root-level Device objects with _HIDs. This patch makes us pay attention to those _HIDs and only add the synthetic ACPI_BUS_HID for root-level objects that do not supply their own _HID. For example, this DSDT: https://bugzilla.kernel.org/show_bug.cgi?id=15605 contains: Scope (_SB) { ... } Device (AMW0) { Name (_HID, EisaId ("PNP0C14")) ... } and we should use "PNP0C14" for the AMW0 device, not "LNXSYBUS". Signed-off-by:
Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by:
Zhang Rui <rui.zhang@intel.com> Tested-by:
Yong Wang <yong.y.wang@intel.com> Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
Thomas Renninger <trenn@suse.de> Tested-by:
-
James Bottomley authored
commit 9281b16c upstream. The old IDE cmd64x checks the status of the CNTRL register to see if the ports are enabled before probing them. pata_cmd64x doesn't do this, which causes a HPMC on parisc when it tries to poke at the secondary port because apparently the BAR isn't wired up (and a non-responding piece of memory causes a HPMC). Fix this by porting the CNTRL register port detection logic from IDE cmd64x. In addition, following converns from Alan Cox, add a check to see if a mobility electronics bridge is the immediate parent and forgo the check if it is (prevents problems on hotplug controllers). Signed-off-by:
James Bottomley <James.Bottomley@suse.de> Signed-off-by:
Jeff Garzik <jgarzik@pobox.com> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
commit c754d9b6 upstream. s/ARTIM2/ARTTIM23/ in cmd648_bmdma_stop() while at it Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
commit 03a849e6 upstream. Clear the primary channel pending interrupt bit instead of the reserved one. Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
commit a2bd6220 upstream. Fix incorrect handling of recovery clocks value == 16 resulting in overclocked recovery timings & potentially underclocked active timings. Signed-off-by:
-
Sergei Shtylyov authored
commit 89d3b360 upstream. Some places were using PCI_CLASS_REVISION instead of PCI_REVISION_ID, so they weren't converted by commit 44c10138 (PCI: Change all drivers to use pci_device->revision). Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
-
Namhyung Kim authored
commit b062962e upstream. Commit e9c7469b ("md: implment REQ_FLUSH/FUA support") introduced R5_WantFUA flag and set rw to WRITE_FUA in that case. However remaining code still checks whether rw is exactly same as WRITE or not, so FUAed-write ends up with being treated as READ. Fix it. This bug has been present since 2.6.37 and the fix is suitable for any -stable kernel since then. It is not clear why this has not caused more problems. Cc: Tejun Heo <tj@kernel.org> Signed-off-by:
Namhyung Kim <namhyung@gmail.com> Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Namhyung Kim authored
commit 9b2dc8b6 upstream. The @bio->bi_phys_segments consists of active stripes count in the lower 16 bits and processed stripes count in the upper 16 bits. So logical-OR operator should be bitwise one. This bug has been present since 2.6.27 and the fix is suitable for any -stable kernel since then. Fortunately the bad code is only used on error paths and is relatively unlikely to be hit. Signed-off-by:
-
Namhyung Kim authored
commit 01393f3d upstream. Check pers->hot_remove_disk instead of pers->hot_add_disk in slot_store() during disk removal. The linear personality only has ->hot_add_disk and no ->hot_remove_disk, so that removing disk in the array resulted to following kernel bug: $ sudo mdadm --create /dev/md0 --level=linear --raid-devices=4 /dev/loop[0-3] $ echo none | sudo tee /sys/block/md0/md/dev-loop2/slot BUG: unable to handle kernel NULL pointer dereference at (null) IP: [< (null)>] (null) PGD c9f5d067 PUD 8575a067 PMD 0 Oops: 0010 [#1] SMP CPU 2 Modules linked in: linear loop bridge stp llc kvm_intel kvm asus_atk0110 sr_mod cdrom sg Pid: 10450, comm: tee Not tainted 3.0.0-rc1-leonard+ #173 System manufacturer System Product Name/P5G41TD-M PRO RIP: 0010:[<0000000000000000>] [< (null)>] (null) RSP: 0018:ffff880085757df0 EFLAGS: 00010282 RAX: ffffffffa00168e0 RBX: ffff8800d1431800 RCX: 000000000000006e RDX: 0000000000000001 RSI: 0000000000000002 RDI: ffff88008543c000 RBP: ffff880085757e48 R08: 0000000000000002 R09: 000000000000000a R10: 0000000000000000 R11: ffff88008543c2e0 R12: 00000000ffffffff R13: ffff8800b4641000 R14: 0000000000000005 R15: 0000000000000000 FS: 00007fe8c9e05700(0000) GS:ffff88011fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 00000000b4502000 CR4: 00000000000406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process tee (pid: 10450, threadinfo ffff880085756000, task ffff8800c9f08000) Stack: ffffffff8138496a ffff8800b4641000 ffff88008543c268 0000000000000000 ffff8800b4641000 ffff88008543c000 ffff8800d1431868 ffffffff81a78a90 ffff8800b4641000 ffff88008543c000 ffff8800d1431800 ffff880085757e98 Call Trace: [<ffffffff8138496a>] ? slot_store+0xaa/0x265 [<ffffffff81384bae>] rdev_attr_store+0x89/0xa8 [<ffffffff8115a96a>] sysfs_write_file+0x108/0x144 [<ffffffff81106b87>] vfs_write+0xb1/0x10d [<ffffffff8106e6c0>] ? trace_hardirqs_on_caller+0x111/0x135 [<ffffffff81106cac>] sys_write+0x4d/0x77 [<ffffffff814fe702>] system_call_fastpath+0x16/0x1b Code: Bad RIP value. RIP [< (null)>] (null) RSP <ffff880085757df0> CR2: 0000000000000000 ---[ end trace ba5fc64319a826fb ]--- Signed-off-by:
-
Dave Jones authored
commit 13f06753 upstream. cpufreq_stats leaves behind its sysfs entries, which causes a panic when something stumbled across them. (Discovered by unloading cpufreq_stats while powertop was loaded). Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Robert Richter authored
commit fe47ae7f upstream. The lockdep warning below detects a possible A->B/B->A locking dependency of mm->mmap_sem and dcookie_mutex. The order in sync_buffer() is mm->mmap_sem/dcookie_mutex, while in sys_lookup_dcookie() it is vice versa. Fixing it in sys_lookup_dcookie() by unlocking dcookie_mutex before copy_to_user(). oprofiled/4432 is trying to acquire lock: (&mm->mmap_sem){++++++}, at: [<ffffffff810b444b>] might_fault+0x53/0xa3 but task is already holding lock: (dcookie_mutex){+.+.+.}, at: [<ffffffff81124d28>] sys_lookup_dcookie+0x45/0x149 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (dcookie_mutex){+.+.+.}: [<ffffffff8106557f>] lock_acquire+0xf8/0x11e [<ffffffff814634f0>] mutex_lock_nested+0x63/0x309 [<ffffffff81124e5c>] get_dcookie+0x30/0x144 [<ffffffffa0000fba>] sync_buffer+0x196/0x3ec [oprofile] [<ffffffffa0001226>] task_exit_notify+0x16/0x1a [oprofile] [<ffffffff81467b96>] notifier_call_chain+0x37/0x63 [<ffffffff8105803d>] __blocking_notifier_call_chain+0x50/0x67 [<ffffffff81058068>] blocking_notifier_call_chain+0x14/0x16 [<ffffffff8105a718>] profile_task_exit+0x1a/0x1c [<ffffffff81039e8f>] do_exit+0x2a/0x6fc [<ffffffff8103a5e4>] do_group_exit+0x83/0xae [<ffffffff8103a626>] sys_exit_group+0x17/0x1b [<ffffffff8146ad4b>] system_call_fastpath+0x16/0x1b -> #0 (&mm->mmap_sem){++++++}: [<ffffffff81064dfb>] __lock_acquire+0x1085/0x1711 [<ffffffff8106557f>] lock_acquire+0xf8/0x11e [<ffffffff810b4478>] might_fault+0x80/0xa3 [<ffffffff81124de7>] sys_lookup_dcookie+0x104/0x149 [<ffffffff8146ad4b>] system_call_fastpath+0x16/0x1b other info that might help us debug this: 1 lock held by oprofiled/4432: #0: (dcookie_mutex){+.+.+.}, at: [<ffffffff81124d28>] sys_lookup_dcookie+0x45/0x149 stack backtrace: Pid: 4432, comm: oprofiled Not tainted 2.6.39-00008-ge5a450d #9 Call Trace: [<ffffffff81063193>] print_circular_bug+0xae/0xbc [<ffffffff81064dfb>] __lock_acquire+0x1085/0x1711 [<ffffffff8102ef13>] ? get_parent_ip+0x11/0x42 [<ffffffff810b444b>] ? might_fault+0x53/0xa3 [<ffffffff8106557f>] lock_acquire+0xf8/0x11e [<ffffffff810b444b>] ? might_fault+0x53/0xa3 [<ffffffff810d7d54>] ? path_put+0x22/0x27 [<ffffffff810b4478>] might_fault+0x80/0xa3 [<ffffffff810b444b>] ? might_fault+0x53/0xa3 [<ffffffff81124de7>] sys_lookup_dcookie+0x104/0x149 [<ffffffff8146ad4b>] system_call_fastpath+0x16/0x1b References: https://bugzilla.kernel.org/show_bug.cgi?id=13809Signed-off-by:
Robert Richter <robert.richter@amd.com> Signed-off-by:
-
Daniel T Chen authored
commit 0a1896b2 upstream. BugLink: https://launchpad.net/bugs/792712 The original reporter states that sound from the internal speakers is inaudible until using the model=auto quirk. This symptom is due to an existing quirk mask for 0x102802b* that uses the model=dell quirk. To limit the possible regressions, leave the existing quirk mask but add a higher priority specific mask for the reporter's PCI SSID. Reported-and-tested-by: rodni hipp Signed-off-by:
Daniel T Chen <crimsun@ubuntu.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Dmitry Torokhov authored
commit cd3c18ba upstream. Full-speed isoc endpoints specify interval in exponent based form in frames, not microframes, so we need to adjust accordingly. NEC xHCI host controllers will return an error code of 0x11 if a full speed isochronous endpoint is added with the Interval field set to something less than 3 (2^3 = 8 microframes, or one frame). It is impossible for a full speed device to have an interval smaller than one frame. This was always an issue in the xHCI driver, but commit dfa49c4a "USB: xhci - fix math in xhci_get_endpoint_interval()" removed the clamping of the minimum value in the Interval field, which revealed this bug. This needs to be backported to stable kernels back to 2.6.31. Reported-by:
Matt Evans <matt@ozlabs.org> Signed-off-by:
Dmitry Torokhov <dtor@vmware.com> Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
-
Steffen Sledz authored
commit a26d31ce upstream. E.g. newer CAN 2.0 A/B <=> USB 2.0 converters report idProduct=f3c2. Signed-off-by:
Steffen Sledz <sledz@dresearch-fe.de> Signed-off-by:
-
Libor Pechacek authored
commit 3824c1dd upstream. Protocol stall should not be fatal while reading port or hub status as it is transient state. Currently hub EP0 STALL during port status read results in failed device enumeration. This has been observed with ST-Ericsson (formerly Philips) USB 2.0 Hub (04cc:1521) after connecting keyboard. Signed-off-by:
Libor Pechacek <lpechacek@suse.cz> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Toby Gray authored
commit 4061fde2 upstream. This adds the Nokia E7 and C7 to the list of devices in cdc-acm, allowing the secondary ACM channel on the device to be exposed. Without this patch the ACM driver won't claim this secondary channel as it's marked as having a vendor-specific protocol. Signed-off-by:
Toby Gray <toby.gray@realvnc.com> Signed-off-by:
-
Joerg Roedel authored
commit 0de66d5b upstream. The driver contains several loops counting on an u16 value where the exit-condition is checked against variables that can have values up to 0xffff. In this case the loops will never exit. This patch fixed 3 such loops. Signed-off-by:
Joerg Roedel <joerg.roedel@amd.com> Signed-off-by:
-
Dan Carpenter authored
commit f124c6ae upstream. b->args[] has MC_ARGS elements, so the comparison here should be ">=" instead of ">". Otherwise we read past the end of the array one space. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
OGAWA Hirofumi authored
commit 1adffbae upstream. We are clearly missing '~' in fat_ioctl_set_attributes(). Reported-by:
Dmitry Dmitriev <dimondmm@yandex.ru> Signed-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
-
Daniel Haid authored
commit 62fff811 upstream. On my x86_64 system with >4GB of ram and swiotlb instead of a hardware iommu (because I have a VIA chipset), the call to pci_set_dma_mask (see below) with 40bits returns an error. But it seems that the radeon driver is designed to have need_dma32 = true exactly if pci_set_dma_mask is called with 32 bits and false if it is called with 40 bits. I have read somewhere that the default are 32 bits. So if the call fails I suppose that need_dma32 should be set to true. And indeed the patch fixes the problem I have had before and which I had described here: http://choon.net/forum/read.php?21,106131,115940Acked-by:
Alex Deucher <alexdeucher@gmail.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Hans de Goede authored
commit 6a574b5b upstream. I found this while figuring out why gnome-shell would not run on my Asus EeeBox PC EB1007. As a standalone "pc" this device cleary does not have an internal panel, yet it claims it does. Add a quirk to fix this. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Keith Packard <keithp@keithp.com> Signed-off-by:
-
Peter Zijlstra authored
commit f2513cde upstream. The main lock_is_held() user is lockdep_assert_held(), avoid false assertions in lockdep_off() sections by unconditionally reporting the lock is taken. [ the reason this is important is a lockdep_assert_held() in ttwu() which triggers a warning under lockdep_off() as in printk() which can trigger another wakeup and lock up due to spinlock recursion, as reported and heroically debugged by Arne Jansen ] Reported-and-tested-by:
Arne Jansen <lists@die-jansens.de> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1307398759.2497.966.camel@laptopSigned-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Luciano Coelho authored
commit 208c72f4 upstream. In both trigger_scan and sched_scan operations, we were checking for the SSID length before assigning the value correctly. Since the memory was just kzalloc'ed, the check was always failing and SSID with over 32 characters were allowed to go through. This was causing a buffer overflow when copying the actual SSID to the proper place. This bug has been there since 2.6.29-rc4. Signed-off-by:
Luciano Coelho <coelho@ti.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Jordan_Hargrave@Dell.com authored
commit e522a712 upstream. The following patch sets the MaxPayload setting to match the parent reading when inserting a PCIE card into a hotplug slot. On our system, the upstream bridge is set to 256, but when inserting a card, the card setting defaults to 128. As soon as I/O is performed to the card it starts receiving errors since the payload size is too small. Reviewed-by:
Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by:
Jordan Hargrave <jordan_hargrave@dell.com> Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Hugh Dickins authored
commit e0dcd8a0 upstream. Al Viro observes that in the hugetlb case, handle_mm_fault() may return a value of the kind ENOSPC when its caller is expecting a value of the kind VM_FAULT_SIGBUS: fix alloc_huge_page()'s failure returns. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
James Bottomley authored
commit e73e079b upstream. In certain circumstances, we can get an oops from a torn down device. Most notably this is from CD roms trying to call scsi_ioctl. The root cause of the problem is the fact that after scsi_remove_device() has been called, the queue is fully torn down. This is actually wrong since the queue can be used until the sdev release function is called. Therefore, we add an extra reference to the queue which is released in sdev->release, so the queue always exists. Reported-by:
Parag Warudkar <parag.lkml@gmail.com> Signed-off-by:
James Bottomley <jbottomley@parallels.com> Signed-off-by:
-
