- 22 Sep, 2015 2 commits
-
-
Mugunthan V N authored
Moving mac address reading from ethernet driver to common file for better maintenance and for code reusable. Signed-off-by:
Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'linux-can-next-for-4.4-20150921' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2015-09-17 this is a pull request of 8 patches for net-next/master. All 8 patches are by me and cleanup the flexcan driver. ==================== Signed-off-by:
-
- 21 Sep, 2015 28 commits
-
-
Florian Fainelli authored
We were checking twice for ec->tx_coalesce_usecs_high, remove the duplicate test. Reported-by:
Julia Lawall <julia.lawall@lip6.fr> Reported-by: kbuild-all@01.org Fixes: 2f913070 ("net: bcmgenet: Implement TX coalescing control knobs") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Yuchung Cheng authored
This patch makes TLP to use 1 sec timer by default when RTT is not available due to SYN/ACK retransmission or SYN cookies. Prior to this change, the lack of RTT prevents TLP so the first data packets sent can only be recovered by fast recovery or RTO. If the fast recovery fails to trigger the RTO is 3 second when SYN/ACK is retransmitted. With this patch we can trigger fast recovery in 1sec instead. Note that we need to check Fast Open more properly. A Fast Open connection could be (accepted then) closed before it receives the final ACK of 3WHS so the state is FIN_WAIT_1. Without the new check, TLP will retransmit FIN instead of SYN/ACK. Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Nandita Dukkipati <nanditad@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Yuchung Cheng authored
Currently SYN/ACK RTT is measured in jiffies. For LAN the SYN/ACK RTT is often measured as 0ms or sometimes 1ms, which would affect RTT estimation and min RTT samping used by some congestion control. This patch improves SYN/ACK RTT to be usec resolution if platform supports it. While the timestamping of SYN/ACK is done in request sock, the RTT measurement is carefully arranged to avoid storing another u64 timestamp in tcp_sock. For regular handshake w/o SYNACK retransmission, the RTT is sampled right after the child socket is created and right before the request sock is released (tcp_check_req() in tcp_minisocks.c) For Fast Open the child socket is already created when SYN/ACK was sent, the RTT is sampled in tcp_rcv_state_process() after processing the final ACK an right before the request socket is released. If the SYN/ACK was retransmistted or SYN-cookie was used, we rely on TCP timestamps to measure the RTT. The sample is taken at the same place in tcp_rcv_state_process() after the timestamp values are validated in tcp_validate_incoming(). Note that we do not store TS echo value in request_sock for SYN-cookies, because the value is already stored in tp->rx_opt used by tcp_ack_update_rtt(). One side benefit is that the RTT measurement now happens before initializing congestion control (of the passive side). Therefore the congestion control can use the SYN/ACK RTT. Signed-off-by:
-
David S. Miller authored
Ursula Braun says: ==================== s390: qeth and iucv patches here is version 2 of some s390 related qeth patches for net-next. The patch by Thomas Richter adds a new feature to the qeth layer2 code; the remaining patches are minor improvements. Version 2 of patch 4 uses the desired indentation in function declarations and definitions spanning multiple lines in almost all cases. Thomas run into a conflict with the maximum number of columns once. Thus you will still see one function definition using an earlier column before the opening paranthesis. ==================== Signed-off-by: -
Ursula Braun authored
The iucv code uses arrays as arguments. Even though this does not really cause a problem, it could be misleading, since the compiler turns array arguments into just a pointer argument. To be more precise this patch changes the array arguments into pointers. Signed-off-by:
Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by:
-
Thomas Richter authored
Checksum offloading for send and receive is already supported for layer 3 (IP layer). This patch adds support for RX and TX hardware checksum offloading for layer 2 (MAC layer). The hardware calculates the checksum for IP UDP and TCP packets. This patch moves the hardware checksum offloading setup to the set of common functions in qeth_core_main.c. Layer 2 and layer 3 now simply call the same common functions. Also note that TX checksum offloading is always enabled. The device driver relies on the TCP/IP stack to make use of this feature. Signed-off-by:
Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by:
Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by:
-
Ursula Braun authored
An OSA-Express port name was required to identify a shared OSA port. All operating system instances that shared the port had to use the same port name. This requirement no longer applies. Signed-off-by:
-
Lakhvich Dmitriy authored
User is not allowed to write into bridge_state sysfs file. Fixed attribute not mislead the user Signed-off-by:
Lakhvich Dmitriy <ldmitriy@ru.ibm.com> Signed-off-by:
Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Reviewed-by:
Thomas Richter <tmricht@de.ibm.com> Signed-off-by:
-
Eugene Crosser authored
Length specifier in the %pM format is not supported (at least, not documented). Remove it, and also an extraneous '&' for the array. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
David S. Miller authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2015-09-18 Here's the first bluetooth-next pull request for the 4.4 kernel: - ieee802154 cleanups & fixes - debugfs support for the at86rf230 driver - Support for quirky (seemingly counterfeit) CSR Bluetooth controllers - Power management and device config improvements for Intel controllers - Fix for devices with incorrect advertising data length - Fix for closing HCI user channel socket Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by:
-
Marc Kleine-Budde authored
This patch defers the writing of the interrupts bits of the CTRL register order to enables all interrupts atomically at the the of the flexcan_chip_start() function. Suggested-by:
Torsten Lang <torsten.lang@uweschneider.de> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Marc Kleine-Budde authored
This patch gives the member of flexcan_priv holding mailboxes a sensible name, by renaming from "cantxfg" to "mb": struct flexcan_priv::cantxfg -> struct flexcan_priv::mb Signed-off-by: -
Marc Kleine-Budde authored
This patch renames the pointer to the mmio address space from "base" to "regs" and changes the type from "void __iomem *" to "struct flexcan_regs __iomem *". Signed-off-by: -
Marc Kleine-Budde authored
This patch renames the "features" member of struct flexcan_devtype_data to "quirks". The corresponding defines are renamed too, to reflect what they actually do. FLEXCAN_HAS_V10_FEATURES -> FLEXCAN_QUIRK_DISABLE_RXFG FLEXCAN_HAS_BROKEN_ERR_STATE -> FLEXCAN_QUIRK_BROKEN_ERR_STATE FLEXCAN_HAS_MECR_FEATURES -> FLEXCAN_QUIRK_DISABLE_MECR Signed-off-by: -
Marc Kleine-Budde authored
This patch changes the order the individual bits of the mcr register in flexcan_chip_start() are or'ed together to match the datasheet. The inline documentation is adjusted accordingly. Signed-off-by: -
Marc Kleine-Budde authored
This patch removes unused header files from the flexcan driver. Signed-off-by: -
Marc Kleine-Budde authored
This patch adds the missing #include-s to the dev.h and led.h, so that they can be used without including further header files. Signed-off-by: -
Marc Kleine-Budde authored
This patch fixes up the coding style to make checkpatch happier. Some typos are also fixed. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-09-17 This series contains updates to i40e and i40evf. Shannon provides updates to i40e and i40evf to resolve an issue with the nvmupdate utility. First renames a variable name to reduce confusion and to differentiate it from the actual user variable. Then added the ability to save the admin queue write back descriptor if a caller supplies a buffer for it to be saved into. Added a new GetStatus command so that the NVM update tool can query the current status instead of doing fake write requests to probe for readiness. Added wait states to the NVM update state machine to signify when waiting for an update operation to finish, whether we are in the middle of a set of write operations, or we are now idle but waiting. Then added a facility to run admin queue commands through the NVM update utility in order to allow the update tools to interact with the firmware and do special commands needed for updates and configuration changes. Also added a facility to recover the result of a previously run admin queue command. ==================== Signed-off-by: -
David S. Miller authored
Merge tag 'linux-can-next-for-4.4-20150917' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2015-09-17 this is a pull request of two patches for net-next/master. Gerhard Bertelsmann adds support for the CAN controller found on the Allwinner A10/A20 SoC. ==================== Signed-off-by:
-
Ksenija Stanojevic authored
Replace time_t type and get_seconds function which are not y2038 safe on 32-bit systems. Function ktime_get_seconds use monotonic instead of real time and therefore will not cause overflow. Signed-off-by:
Ksenija Stanojevic <ksenija.stanojevic@gmail.com> Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
David S. Miller authored
huangdaode says: ==================== net: Hisilicon Network Subsystem support This is V2 of Hisilicon Network Subsystem(HNS) patchesets taking care about LKML comments. Please find out the changes from the change logs. This patchset is rebased on mainline kernel Linux 4.3-rc1 branch. [PATCH v2 1/5] Device Tree Binding Documentation [PATCH v2 2/5] Merge MDIO Module [PATCH v2 3/5] Hisilicon Network Acceleration Engine Framework [PATCH v2 4/5] Distributed System Area Fabric Module [PATCH v2 5/5] Basic Ethernet Driver Module Changes from V1: 1. Remove "inline" in C file (according to LKML comment, same in below). 2. Fix a bug about class_find_device. 3. Change the DTS pattern on hnae, restruct it to compatible with Hi1610 soc. 4. Unified hip04_mdio and hip05_mdio into hns_mdio, which is more usaul for later SOCs. V1 Patches Reference: https://lkml.org/lkml/2015/8/14/165 ==================== Signed-off-by:
-
huangdaode authored
This is to add basic ethernet support for HNS. It is one of the way to use the HNS acceleration engine. But most of the decoding/encoding capability of the AE cannot be used in this way. This submit contains the basic feature as a ethernet driver. More will be added later. Signed-off-by:
huangdaode <huangdaode@hisilicon.com> Signed-off-by:
Kenneth Lee <liguozhu@huawei.com> Signed-off-by:
Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by:
-
huangdaode authored
DSAF, namely Distributed System Area Fabric, is one of the HNS acceleration engine implementation. This patch add DSAF driver to the system. hns_ae_adapt: the adaptor for registering the driver to HNAE framework hns_dsaf_mac: MAC cover interface for GE and XGE hns_dsaf_gmac: GE (10/100/1000G Ethernet) MAC function hns_dsaf_xgmac: XGE (10000+G Ethernet) MAC function hns_dsaf_main: the platform device driver for the whole hardware hns_dsaf_misc: some misc helper function, such as LED support hns_dsaf_ppe: packet process engine function hns_dsaf_rcb: ring buffer function Signed-off-by:
-
huangdaode authored
HNAE (Hisilicon Network Acceleration Engine) is a framework to provide a unified ring buffer interface for Hisilicon Network Acceleration Engines. With the interface, upper layer can work as ethernet driver, ODP driver or other service driver on purpose. Signed-off-by:
-
huangdaode authored
The MDIO support for Hisilicon Network Subsystem. It is used in Hislicon hip04, hip05 and Hi1610 SoC to control the external PHY Signed-off-by:
-
huangdaode authored
The Hisilicon Network Subsystem is a long term evolution IP which is supposed to be used in Hisilicon ICT SoC. The IP, which is called hns for short, is a TCP/IP acceleration engine, which can directly decode TCP/IP stream and distribute them to different ring buffers. HNS can be configured to work on different mode for different scenario. This patch make use only some of the mode to make it as standard ethernet NIC. The other mode will be added soon. The whole function has 4 kernel sub-modules: hnae: the HNS acceleration engine framework. It provides a abstract interface between the engine and the upper layers which make use of the engine by ring buffer. hns_enet_drv: a standard ethernet driver that base on the ring buffer. hns_dsaf: one of the implementation of HNS acceleration engine, which is applied on Hililicon hip05, Hi1610 and other later-on SoCs hns_mdio: the mdio control to the PHY, used by acceleration engine This submit add basic config and documents Signed-off-by:
-
chas williams authored
If netfront connects with two (or more) queues and then reconnects with only one queue it fails to delete or rewrite the multi-queue-num-queues key and netback will try to use the wrong number of queues. Always write the num-queues field if the backend has multi-queue support. Signed-off-by:
Chas Williams <3chas3@gmail.com> Signed-off-by:
-
- 18 Sep, 2015 10 commits
-
-
Szymon Janc authored
Some remote devices (ie Gigaset G-Tag) misbehave with ADV data length. This can lead to incorrect EIR format in device found event when ADV_DATA and SCAN_RSP are merged (terminator field before SCAN_RSP part). Fix this by inspecting ADV_DATA and correct its length if terminator is found. > HCI Event: LE Meta Event (0x3e) plen 42 [hci0] 32.172182 LE Advertising Report (0x02) Num reports: 1 Event type: Connectable undirected - ADV_IND (0x00) Address type: Public (0x00) Address: 7C:2F:80:94:97:5A (Gigaset Communications GmbH) Data length: 30 Flags: 0x06 LE General Discoverable Mode BR/EDR Not Supported Company: Gigaset Communications GmbH (384) Data: 021512348094975abbc5 16-bit Service UUIDs (partial): 1 entry Battery Service (0x180f) RSSI: -65 dBm (0xbf) > HCI Event: LE Meta Event (0x3e) plen 27 [hci0] 32.172191 LE Advertising Report (0x02) Num reports: 1 Event type: Scan response - SCAN_RSP (0x04) Address type: Public (0x00) Address: 7C:2F:80:94:97:5A (Gigaset Communications GmbH) Data length: 15 Name (complete): Gigaset G-tag RSSI: -59 dBm (0xc5) Note "Data length: 30" in ADV_DATA which results in 9 extra zero bytes after Battery Service UUID. Terminator field present in the middle of EIR in Device Found event resulted in userspace stop parsing EIR and skipping device name. @ Device Found: 7C:2F:80:94:97:5A (1) rssi -59 flags 0x0000 02 01 06 0d ff 80 01 02 15 12 34 80 94 97 5a bb ..........4...Z. c5 03 02 0f 18 00 00 00 00 00 00 00 00 00 0e 09 ................ 47 69 67 61 73 65 74 20 47 2d 74 61 67 Gigaset G-tag With this fix EIR with merged ADV_DATA and SCAN_RSP in device found event is properly formatted: @ Device Found: 7C:2F:80:94:97:5A (1) rssi -59 flags 0x0000 02 01 06 0d ff 80 01 02 15 12 34 80 94 97 5a bb ..........4...Z. c5 03 02 0f 18 0e 09 47 69 67 61 73 65 74 20 47 .......Gigaset G 2d 74 61 67 -tag Signed-off-by:Szymon Janc <ext.szymon.janc@tieto.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org>
-
Szymon Janc authored
This patch adds ratelimited version of the BT_ERR macro. Signed-off-by:
-
Eric Dumazet authored
Memory placement in sch_dsmark is silly : Better place mask/value in the same cache line. Also, we can embed small arrays in the first cache line and remove a potential cache miss. Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: bcmgenet: Interrupt coalescing This patch series adds support for interrupt coalescing for GENET adapters. ==================== Signed-off-by: -
Florian Fainelli authored
Add support for the ethtool rx-frames coalescing parameter which allows defining the number of RX interrupts per frames received. The RDMA engine supports a configurable timeout with a resolution of approximately 8.192 us. We can no longer enable the BDONE/PDONE interrupts as those would fire for each packet/buffer received, which would defeat the MBDONE interrupt purpose. The MBDONE interrupt is guaranteed to correspond to a PDONE/BDONE interrupt when the threshold is set to 1. Signed-off-by:
-
Florian Fainelli authored
Configuring the ethtool tx-frames property, which translates into N packets before a TX interrupt is the simplest configuration scheme because it requires no locking neither at the softare nor hardware level, and is completely indepedent from the link speed. Since ethtool does not allow per-tx queue coalescing parameters, we apply the same setting to any transmit queue. We can no longer enable the BDONE/PDONE interrupts as those would fire for each packet/buffer received, which would defeat the MBDONE interrupt purpose. The MBDONE interrupt is guaranteed to correspond to a PDONE/BDONE interrupt when the threshold is set to 1, but offers interrupt coalescing when the value is > 1. Since the HW is configured to generate an interrupt when the ring becomes emtpy, we have to deny any timeout/timer settings coming from user-space to indicate we can only generate an interrupt very <N> packets. While we are at it, fix the DMA_INTR_THRESHOLD_MASK value which was off by one bit (0xff vs. 0x1ff). Signed-off-by:
-
Woojung.Huh@microchip.com authored
Remove not defined MAC_CR_GMII_EN_ bit from MAC_CR. Signed-off-by:
Woojung Huh <woojung.huh@microchip.com> Signed-off-by:
-
Woojung.Huh@microchip.com authored
Create lan78xx_get_mdix_status() and lan78xx_set_mdix_status() for MDIX control. Signed-off-by:
-
Woojung.Huh@microchip.com authored
Remove phy defines in lan78xx.h and use defines in include/linux/microchipphy.h. Signed-off-by:
-
Woojung.Huh@microchip.com authored
Update to use phylib instead of mii_if_info. Signed-off-by:
-
