- 14 Dec, 2018 31 commits
-
-
Stephen Boyd authored
* clk-imx7ulp: clk: imx: imx7ulp: add arm hsrun mode clocks support dt-bindings: clock: imx7ulp: add HSRUN mode related clocks
-
Anson Huang authored
i.MX7ULP has a Cortex-A7 CPU which can run in RUN mode or HSRUN mode, it is controlled in SMC1 module. The RUN mode and HSRUN mode will use different clock source for ARM, "divcore" for RUN mode and "hsrun_divcore" for HSRUN mode, so the control bits in SMC1 module can be abstracted as a HW clock mux, this patch adds HSRUN mode related clocks in SCG1 module and adds "arm" clock in SMC1 module to support RUN mode and HSRUN mode switch. Latest clock tree in RUN mode as below: firc 0 0 0 48000000 0 0 50000 firc_bus_clk 0 0 0 48000000 0 0 50000 hsrun_scs_sel 0 0 0 48000000 0 0 50000 hsrun_divcore 0 0 0 48000000 0 0 50000 sosc 3 3 3 24000000 0 0 50000 spll_pre_sel 1 1 1 24000000 0 0 50000 spll_pre_div 1 1 2 24000000 0 0 50000 spll 1 1 2 528000000 0 0 50000 spll_pfd0 1 1 1 500210526 0 0 50000 spll_pfd_sel 1 1 0 500210526 0 0 50000 spll_sel 1 1 0 500210526 0 0 50000 scs_sel 1 1 0 500210526 0 0 50000 divcore 1 1 0 500210526 0 0 50000 arm 1 1 0 500210526 0 0 50000 Signed-off-by:Anson Huang <Anson.Huang@nxp.com> Signed-off-by:
Stephen Boyd <sboyd@kernel.org>
-
Anson Huang authored
There are HSRUN mode clock mux and divider in SCG1 module, and SMC1 can control i.MX7ULP CPU to run in RUN mode or HSRUN mode, the mode switch bits are actually a clock mux, add these clocks for clock driver and dtb to use. Signed-off-by:
-
Stephen Boyd authored
* clk-of: clk: Use of_node_name_eq for node name comparisons
-
Rob Herring authored
Convert string compares of DT node names to use of_node_name_eq helper instead. This removes direct access to the node name pointer. For instances using of_node_cmp, this has the side effect of now using case sensitive comparisons. This should not matter for any FDT based system which all of these are. Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: linux-renesas-soc@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> (clk-mstp) Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (ux500) Signed-off-by:
-
Stephen Boyd authored
- Proper suspend/resume on VersaClock5 * clk-vc5-suspend: clk: vc5: Add suspend/resume support
-
Marek Vasut authored
Add simple suspend/resume handlers to the driver to restore the chip configuration after resume. It is possible that the chip was configured with non-default values before suspend-resume cycle and that the chip is powered down during this cycle, so the configuration could get lost. Signed-off-by:
Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Alexey Firago <alexey_firago@mentor.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: linux-renesas-soc@vger.kernel.org Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by:
-
Stephen Boyd authored
* clk-fixes: clk: qcom: qcs404: Fix gpll0_out_main parent clk: zynqmp: Off by one in zynqmp_is_valid_clock() clk: mmp: Off by one in mmp_clk_add() clk: mvebu: Off by one bugs in cp110_of_clk_get() arm64: dts: qcom: sdm845-mtp: Mark protected gcc clocks clk: zynqmp: handle fixed factor param query error clk: qcom: gcc: Fix board clock node name clk: meson: axg: mark fdiv2 and fdiv3 as critical clk: meson-gxbb: set fclk_div3 as CLK_IS_CRITICAL clk: fixed-factor: fix of_node_get-put imbalance
-
Stephen Boyd authored
- Add resets and make Qualcomm MSM8998 GCC driver more functional * clk-qcom-8998-resets: clk: qcom: Drop unused 8998 clock clk: qcom: Leave mmss noc on for 8998 clk: qcom: Add missing msm8998 resets clk: qcom: gcc-msm8998: Add clkref clocks clk: qcom: gcc-msm8998: Disable halt check of UFS clocks clk: qcom: gcc-msm8998: Drop hmss_dvm and lpass_at clk: qcom: Enumerate remaining msm8998 resets clk: qcom: Add xo dummy clk on msm8998 clk: qcom: Fix MSM8998 resets
-
Jeffrey Hugo authored
gcc_lpass_trig_clk is not used downstream, therefore there is no reason to expect it to be needed for clients. Let's remove it because messing with the clock has been observed to cause Linux hangs when the qdss_clk is initialized by rpmcc. Signed-off-by:
Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by:
Marc Gonzalez <marc.w.gonzalez@free.fr> Fixes: 4807c71c (arm64: dts: Add msm8998 SoC and MTP board support) Signed-off-by:
-
Jeffrey Hugo authored
Similar to other qcom targets, gcc_mmss_noc_cfg_ahb_clk should not be disabled. Any mmss access depends on this clock, and its been observed that enabling mmssnoc_axi_rpm_clk with rpmcc results in an implicit access to mmss and will crash the system if gcc_mmss_noc_cfg_ahb_clk is disabled. Signed-off-by:
-
Stephen Boyd authored
Merge branches 'clk-imx7ulp', 'clk-imx6-fixes', 'clk-imx-fixes', 'clk-imx8qxp' and 'clk-imx8mq' into clk-next - NXP i.MX7ULP SoC clock support - Support for i.MX8QXP SoC clocks - Support for NXP i.MX8MQ clock controllers * clk-imx7ulp: clk: imx: add imx7ulp clk driver clk: imx: implement new clk_hw based APIs clk: imx: make mux parent strings const dt-bindings: clock: add imx7ulp clock binding doc clk: imx: add imx7ulp composite clk support clk: imx: add pfdv2 support clk: imx: add pllv4 support clk: fractional-divider: add CLK_FRAC_DIVIDER_ZERO_BASED flag support clk: imx: add gatable clock divider support * clk-imx6-fixes: clk: imx6q: handle ENET PLL bypass clk: imx6q: optionally get CCM inputs via standard clock handles clk: imx6q: reset exclusive gates on init * clk-imx-fixes: clk: imx6q: add DCICx clocks gate clk: imx6sl: ensure MMDC CH0 handshake is bypassed clk: imx7d: remove UART1 clock setting * clk-imx8qxp: clk: imx: add imx8qxp lpcg driver clk: imx: add lpcg clock support clk: imx: add imx8qxp clk driver clk: imx: add scu clock common part clk: imx: add configuration option for mmio clks dt-bindings: clock: add imx8qxp lpcg clock binding dt-bindings: clock: imx8qxp: add SCU clock IDs firmware: imx: add pm svc headfile dt-bindings: fsl: scu: update power domain binding firmware: imx: remove resource id enums dt-bindings: imx: add scu resource id headfile * clk-imx8mq: clk: imx: Make the i.MX8MQ CCM clock driver CLK_IMX8MQ dependant clk: imx: remove redundant initialization of ret to zero clk: imx: Add SCCG PLL type clk: imx: Add fractional PLL output clock clk: imx: Add clock driver for i.MX8MQ CCM clk: imx: Add imx composite clock dt-bindings: Add binding for i.MX8MQ CCM
-
Stephen Boyd authored
Merge branches 'clk-renesas', 'clk-allwinner', 'clk-tegra', 'clk-meson' and 'clk-rockchip' into clk-next * clk-renesas: clk: renesas: rcar-gen3: Add HS400 quirk for SD clock clk: renesas: rcar-gen3: Add documentation for SD clocks clk: renesas: rcar-gen3: Set state when registering SD clocks clk: renesas: r8a77995: Simplify PLL3 multiplier/divider clk: renesas: r8a77995: Add missing CPEX clock clk: renesas: r8a77995: Remove non-existent SSP clocks clk: renesas: r8a77995: Remove non-existent VIN5-7 module clocks clk: renesas: r8a77995: Correct parent clock of DU clk: renesas: r8a77990: Correct parent clock of DU clk: renesas: r8a77970: Add CPEX clock clk: renesas: r8a77965: Add CPEX clock clk: renesas: r8a7796: Add CPEX clock clk: renesas: r8a7795: Add CPEX clock clk: renesas: r8a774a1: Add CPEX clock dt-bindings: clock: r8a7796: Remove CSIREF clock dt-bindings: clock: r8a7795: Remove CSIREF clock clk: renesas: Mark rza2_cpg_clk_register static clk: renesas: r7s9210: Add USB clocks clk: renesas: r8a77970: Add RPC clocks clk: renesas: r7s9210: Add SDHI clocks * clk-allwinner: clk: sunxi-ng: a64: Allow parent change for VE clock clk: sunxi-ng: a33: Set CLK_SET_RATE_PARENT for all audio module clocks clk: sunxi-ng: a33: Use sigma-delta modulation for audio PLL clk: sunxi-ng: h3: Allow parent change for ve clock clk: sunxi-ng: add support for suniv F1C100s SoC dt-bindings: clock: Add Allwinner suniv F1C100s CCU clk: sunxi-ng: h3/h5: Fix CSI_MCLK parent clk: sunxi-ng: r40: Force LOSC parent to RTC LOSC output clk: sunxi-ng: sun50i: a64: Use sigma-delta modulation for audio PLL clk: sunxi-ng: a64: Fix gate bit of DSI DPHY clk: sunxi-ng: Enable DE2_CCU for SUN8I and SUN50I clk: sunxi-ng: Add support for H6 DE3 clocks dt-bindings: clock: sun8i-de2: Add H6 DE3 clock description clk: sunxi-ng: h6: Set video PLLs limits clk: sunxi-ng: Use u64 for calculation of NM rate clk: sunxi-ng: Adjust MP clock parent rate when allowed clk: sunxi-ng: sun50i: h6: Fix MMC clock mux width clk: sunxi-ng: enable so-said LDOs for A64 SoC's pll-mipi clock * clk-tegra: clk: tegra: Return the exact clock rate from clk_round_rate clk: tegra30: Use Tegra CPU powergate helper function soc/tegra: pmc: Drop SMP dependency from CPU APIs clk: tegra: Fix maximum audio sync clock for Tegra124/210 clk: tegra: get rid of duplicate defines clk: tegra20: Check whether direct PLLM sourcing is turned off for EMC clk: tegra20: Turn EMC clock gate into divider * clk-meson: (25 commits) clk: meson: axg-audio: use the clk input helper function clk: meson: add clk-input helper function clk: meson: Mark some things static clk: meson: meson8b: add the read-only video clock trees clk: meson: meson8b: add the fractional divider for vid_pll_dco clk: meson: meson8b: fix the offset of vid_pll_dco's N value clk: meson: Fix GXL HDMI PLL fractional bits width clk: meson: meson8b: add the CPU clock post divider clocks clk: meson: meson8b: rename cpu_div2/cpu_div3 to cpu_in_div2/cpu_in_div3 clk: meson: clk-regmap: add read-only gate ops clk: meson: meson8b: allow changing the CPU clock tree clk: meson: meson8b: run from the XTAL when changing the CPU frequency clk: meson: meson8b: add support for more M/N values in sys_pll clk: meson: meson8b: mark the CPU clock as CLK_IS_CRITICAL clk: meson: meson8b: do not use cpu_div3 for cpu_scale_out_sel clk: meson: clk-pll: check if the clock is already enabled clk: meson: meson8b: fix the width of the cpu_scale_div clock clk: meson: meson8b: fix incorrect divider mapping in cpu_scale_table clk: meson: meson8b: use the HHI syscon if available dt-bindings: clock: meson8b: use the registers from the HHI syscon ... * clk-rockchip: clk: rockchip: add clock-id to gate of ACODEC for rk3328 clk: rockchip: add clock ID of ACODEC for rk3328 clk: rockchip: fix ID of 8ch clock of I2S1 for rk3328 clk: rockchip: fix I2S1 clock gate register for rk3328 clk: rockchip: make rk3188 hclk_vio_bus critical clk: rockchip: fix rk3188 sclk_mac_lbtest parameter ordering clk: rockchip: fix rk3188 sclk_smc gate data clk: rockchip: fix typo in rk3188 spdif_frac parent
-
Stephen Boyd authored
Merge branches 'clk-managed-registration', 'clk-spdx', 'clk-remove-basic' and 'clk-ops-const' into clk-next - Make devm_of_clk_add_hw_provider() use parent dt node if necessary - Various SPDX taggings - Mark clk_ops const when possible * clk-managed-registration: clk: bd718x7: Initial support for ROHM bd71837/bd71847 PMIC clock clk: apcs-msm8916: simplify probe cleanup by using devm clk: clk-twl6040: Free of_provider at remove clk: rk808: use managed version of of_provider registration clk: clk-hi655x: Free of_provider at remove clk: of-provider: look at parent if registered device has no provider info clk: Add kerneldoc to managed of-provider interfaces * clk-spdx: clk: Tag basic clk types with SPDX clk: Tag clk core files with SPDX clk: bcm2835: Switch to SPDX identifier * clk-remove-basic: clk: Loongson1: Remove usage of CLK_IS_BASIC clk: samsung: s3c2410: Remove usage of CLK_IS_BASIC clk: versatile: sp810: Remove usage of CLK_IS_BASIC clk: hisilicon: Remove usage of CLK_IS_BASIC clk: h8300: Remove usage of CLK_IS_BASIC clk: axm5516: Remove usage of CLK_IS_BASIC clk: st: Remove usage of CLK_IS_BASIC clk: renesas: Remove usage of CLK_IS_BASIC * clk-ops-const: clk: s2mps11: constify clk_ops structure clk: pxa: constify clk_ops structures clk: pistachio: constify clk_ops structures clk: palmas: constify clk_ops structure clk: max77686: constify clk_ops structure
-
Robert Yang authored
The current behavior is that clk_round_rate would return the same clock rate passed to it for valid PLL configurations. This change will return the exact rate the PLL will provide in accordance with clk API. Signed-off-by:
Robert Yang <decatf@gmail.com> Reviewed-by:
Dmitry Osipenko <digetx@gmail.com> Tested-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Jon Hunter authored
Rather than using the tegra_powergate_is_powered() function for determining if a CPU is powered, use the tegra_pmc_cpu_is_powered() instead which was created to get the CPU power status. Internally tegra_pmc_cpu_is_powered() calls tegra_powergate_is_powered() and so is equivalent. The Tegra30 clock driver is the only public user of tegra_powergate_is_powered() and so by updating the Tegra30 clock driver to use tegra_pmc_cpu_is_powered(), we can then make tegra_powergate_is_powered() a non-public function. Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Acked-by:
-
Jon Hunter authored
When CONFIG_SMP is disabled, the tegra clk driver now fails to build: drivers/clk/tegra/clk-tegra30.c: In function ‘tegra30_cpu_rail_off_ready’: drivers/clk/tegra/clk-tegra30.c:1151:2: error: implicit declaration of function ‘tegra_pmc_cpu_is_powered’ [-Werror=implicit-function-declaration] cpu_pwr_status = tegra_pmc_cpu_is_powered(1) || ^ Fix the above error by removing the CONFIG_SMP ifdef around the declaration around the PMC CPU APIs because although these are not needed for non-SMP configurations, there is no harm in including these for non-SMP builds either. Fixes: 61866523ed6e ("clk: tegra30: Use Tegra CPU powergate helper function") Reported-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Jon Hunter authored
The maximum frequency supported for I2S on Tegra124 and Tegra210 is 24.576MHz (as stated in the Tegra TK1 data sheet for Tegra124 and the Jetson TX1 module data sheet for Tegra210). However, the maximum I2S frequency is limited to 24MHz because that is the maximum frequency of the audio sync clock. Increase the maximum audio sync clock frequency to 24.576MHz for Tegra124 and Tegra210 in order to support 24.576MHz for I2S. Update the tegra_clk_register_sync_source() function so that it does not set the initial rate for the sync clocks and use the clock init tables to set the initial rate instead. Signed-off-by:
-
Marcel Ziswiler authored
Get rid of 3 duplicate defines. Signed-off-by:
Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by:
-
Stephen Boyd authored
- Qualcomm SDM845 audio subsystem clks * clk-qcom-sdm845-lpass: clk: qcom: Add lpass clock controller driver for SDM845 dt-bindings: clock: Introduce QCOM LPASS clock bindings dt-bindings: clock: Update GCC bindings for protected-clocks
-
Stephen Boyd authored
Merge branches 'clk-qcom-kconfig', 'clk-qcom-gpucc', 'clk-qcom-qcs404-rpm', 'clk-qcom-spi' and 'clk-qcom-videocc-binding' into clk-next - Qualcomm SDM845 GPU clock controllers - Qualcomm QCS404 RPM clk support * clk-qcom-kconfig: clk: qcom: Move to menuconfig and reduce lines * clk-qcom-gpucc: dt-bindings: clock: qcom: Fix the xo parent in gpucc example clk: qcom: gpu_cc_gmu_clk_src has 5 parents, not 6 clk: qcom: Add a dummy enable function for GX gdsc clk: qcom: gdsc: Don't override existing gdsc pd functions clk: qcom: Add graphics clock controller driver for SDM845 dt-bindings: clock: Introduce QCOM Graphics clock bindings * clk-qcom-qcs404-rpm: clk: qcom: smd: Add support for QCS404 rpm clocks * clk-qcom-spi: clk: qcom: msm8916: Additional clock rates for spi * clk-qcom-videocc-binding: dt-bindings: clock: Require #reset-cells in sdm845-videocc
-
Stephen Boyd authored
Merge branches 'clk-qoriq-t1023', 'clk-protected-binding', 'clk-define-show-macro' and 'clk-static' into clk-next - NXP QorIQ T1023 SoC support - Introduce a 'protected-clocks' binding for firmware protected clks - Shrink code some with DEFINE_SHOW_ATTRIBUTE() * clk-qoriq-t1023: clk: qoriq: add more chips support * clk-protected-binding: clk: qcom: Support 'protected-clocks' property dt-bindings: clk: Introduce 'protected-clocks' property * clk-define-show-macro: clk: tegra: Change to use DEFINE_SHOW_ATTRIBUTE macro clk: nomadik: Change to use DEFINE_SHOW_ATTRIBUTE macro * clk-static: clk: stm32mp1: drop pointless static qualifier in stm32_register_hw_clk()
-
Stephen Boyd authored
- Mediatek MT7629 SoC clk controllers * clk-bcm-module-license: clk: bcm2835: make license text and module license match * clk-boston-leak: clk: boston: unregister clks on failure in clk_boston_setup() clk: boston: fix possible memory leak in clk_boston_setup() * clk-mtk-mt7629: clk: mediatek: fix the PCIe MAC clock parent clk: mediatek: Drop more __init markings for driver probe clk: mediatek: Drop __init from mtk_clk_register_cpumuxes() dt-bindings: arm: mediatek: document clk bindings for MT7629 clk: mediatek: add clock support for MT7629 SoC
-
Aisheng Dong authored
Add imx8qxp lpcg driver support Cc: Stephen Boyd <sboyd@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Michael Turquette <mturquette@baylibre.com> Signed-off-by:
Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by:
-
Aisheng Dong authored
The Low-Power Clock Gate (LPCG) modules contain a local programming model to control the clock gates for the peripherals. An LPCG module is used to locally gate the clocks for the associated peripheral. And they're bedind the SCU clock. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Michael Turquette <mturquette@baylibre.com> Signed-off-by:
-
Aisheng Dong authored
Add imx8qxp clk driver which is based on SCU firmware clock service. Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Signed-off-by:
-
Abel Vesa authored
Remove the dependency between the i.MX8MQ CCM clock driver and the CONFIG_SOC_IMX8MQ and use CONFIG_CLK_IMX8MQ instead. CONFIG_CLK_IMX8MQ depends on ARCH_MXC && ARM64. Signed-off-by:
Abel Vesa <abel.vesa@nxp.com> Signed-off-by:
-
Aisheng Dong authored
Add SCU clock common part which will be used by client clock drivers. SCU clocks are totally different from the legacy clocks (No much legacy things can be reused), it's using a firmware interface now based on SCU protocol. So a new configuration option CONFIG_MXC_CLK_SCU is added. Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Signed-off-by:
-
Aisheng Dong authored
The patch introduces CONFIG_MXC_CLK option for legacy MMIO clocks, this is required to compile legacy MMIO clock conditionally when adding SCU based clocks for MX8 platforms later. Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Signed-off-by:
-
Aisheng Dong authored
The Low-Power Clock Gate (LPCG) modules contain a local programming model to control the clock gates for the peripherals. An LPCG module is used to locally gate the clocks for the associated peripheral. Note: This level of clock gating is provided after the clocks are generated by the SCU resources and clock controls. Thus even if the clock is enabled by these control bits, it might still not be running based on the base resource. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: devicetree@vger.kernel.org Reviewed-by:
-
Aisheng Dong authored
Add IMX8QXP SCU clock IDs. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: devicetree@vger.kernel.org Cc: linux-clk@vger.kernel.org Reviewed-by:
-
- 13 Dec, 2018 2 commits
-
-
Stephen Boyd authored
Merge tag 'v4.21-rockchip-clk-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-rockchip Pull rockchip clk driver updates from Heiko Stuebner: - register fixes for rk3188 and rk3328 - one new critical clock for rk3188 and a fixed clock id (double used number) - new clock id for rk3328 * tag 'v4.21-rockchip-clk-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: clk: rockchip: add clock-id to gate of ACODEC for rk3328 clk: rockchip: add clock ID of ACODEC for rk3328 clk: rockchip: fix ID of 8ch clock of I2S1 for rk3328 clk: rockchip: fix I2S1 clock gate register for rk3328 clk: rockchip: make rk3188 hclk_vio_bus critical clk: rockchip: fix rk3188 sclk_mac_lbtest parameter ordering clk: rockchip: fix rk3188 sclk_smc gate data clk: rockchip: fix typo in rk3188 spdif_frac parent
-
https://github.com/BayLibre/clk-mesonStephen Boyd authored
Pull more meson clk driver updates from Neil Armstrong: - Fix GXL HDMI Pll fractional bits (from first round) - Add the Meson8/Meson8b video clocks - Add clk-input helper and use it for axg-audio clock driver * tag 'meson-clk-4.21-2' of https://github.com/BayLibre/clk-meson: clk: meson: axg-audio: use the clk input helper function clk: meson: add clk-input helper function clk: meson: meson8b: add the read-only video clock trees clk: meson: meson8b: add the fractional divider for vid_pll_dco clk: meson: meson8b: fix the offset of vid_pll_dco's N value clk: meson: Fix GXL HDMI PLL fractional bits width
-
- 11 Dec, 2018 4 commits
-
-
Jeffrey Hugo authored
commit c0cb7c7e ("clk: qcom: Enumerate remaining msm8998 resets") missed two USB2 resets. Add them. Fixes: c0cb7c7e ("clk: qcom: Enumerate remaining msm8998 resets") Signed-off-by:
-
Stephen Boyd authored
These are all GPL-2.0 files per the existing license text. Replace the boiler plate with the tag. Signed-off-by: -
Stephen Boyd authored
These are all GPL-2.0 files per the existing license text. Replace the boiler plate with the tag. Signed-off-by: -
Jerome Brunet authored
Rework the axg audio clock controller to use the new clk-input helper function. Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
- 10 Dec, 2018 3 commits
-
-
Stephen Boyd authored
This flag doesn't look to be used by any code, just set in the clk init structure and then never tested again. Remove it from this driver as it doesn't provide any benefit. Also remove parenthesis nearby that are not needed and include clk.h to fix a sparse warning about static function definition. Signed-off-by: -
Stephen Boyd authored
This flag doesn't look to be used by any code, just set in the clk init structure and then never tested again. Remove it from this drivers as it doesn't provide any benefit. Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Stephen Boyd authored
This flag doesn't look to be used by any code, just set in the clk init structure and then never tested again. Remove it from this driver as it doesn't provide any benefit. Cc: Linus Walleij <linus.walleij@linaro.org> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
