sk->sk_user_data has multiple users, which are not compatible with each
other. Writers must synchronize by grabbing the sk->sk_callback_lock.

l2tp currently fails to grab the lock when modifying the underlying tunnel
socket fields. Fix it by adding appropriate locking.

We err on the side of safety and grab the sk_callback_lock also inside the
sk_destruct callback overridden by l2tp, even though there should be no
refs allowing access to the sock at the time when sk_destruct gets called.

v4:
- serialize write to sk_user_data in l2tp sk_destruct

v3:
- switch from sock lock to sk_callback_lock
- document write-protection for sk_user_data

v2:
- update Fixes to point to origin of the bug
- use real names in Reported/Tested-by tags

Cc: Tom Parkin <tparkin@katalix.com>
Fixes: 3557baab ("[L2TP]: PPP over L2TP driver core")
Reported-by: Haowei Yan <g1042620637@gmail.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A problem about insmod thunderbolt-net failed is triggered with following
log given while lsmod does not show thunderbolt_net:

 insmod: ERROR: could not insert module thunderbolt-net.ko: File exists

The reason is that tbnet_init() returns tb_register_service_driver()
directly without checking its return value, if tb_register_service_driver()
failed, it returns without removing property directory, resulting the
property directory can never be created later.

 tbnet_init()
   tb_register_property_dir() # register property directory
   tb_register_service_driver()
     driver_register()
       bus_add_driver()
         priv = kzalloc(...) # OOM happened
   # return without remove property directory

Fix by remove property directory when tb_register_service_driver() returns
error.

Fixes: e69b6c02 ("net: Add support for networking over Thunderbolt cable")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Shang XiaoJing says:

====================
net: microchip: Fix potential null-ptr-deref due to create_singlethread_workqueue()

There are some functions call create_singlethread_workqueue() without
checking ret value, and the NULL workqueue_struct pointer may causes
null-ptr-deref. Will be fixed by this patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

sparx_stats_init() calls create_singlethread_workqueue() and not
checked the ret value, which may return NULL. And a null-ptr-deref may
happen:

sparx_stats_init()
    create_singlethread_workqueue() # failed, sparx5->stats_queue is NULL
    queue_delayed_work()
        queue_delayed_work_on()
            __queue_delayed_work()  # warning here, but continue
                __queue_work()      # access wq->flags, null-ptr-deref

Check the ret value and return -ENOMEM if it is NULL. So as
sparx5_start().

Fixes: af4b1102 ("net: sparx5: add ethtool configuration and statistics support")
Fixes: b37a1bae ("net: sparx5: add mactable support")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

lan966x_stats_init() calls create_singlethread_workqueue() and not
checked the ret value, which may return NULL. And a null-ptr-deref may
happen:

lan966x_stats_init()
    create_singlethread_workqueue() # failed, lan966x->stats_queue is NULL
    queue_delayed_work()
        queue_delayed_work_on()
            __queue_delayed_work()  # warning here, but continue
                __queue_work()      # access wq->flags, null-ptr-deref

Check the ret value and return -ENOMEM if it is NULL.

Fixes: 12c2d0a5 ("net: lan966x: add ethtool configuration and statistics")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the initial commit dc452a47 ("net: dsa: introduce tagger-owned
storage for private and shared data"), we had a call to
tag_ops->disconnect(dst) issued from dsa_tree_free(), which is called at
tree teardown time.

There were problems with connecting to a switch tree as a whole, so this
got reworked to connecting to individual switches within the tree. In
this process, tag_ops->disconnect(ds) was made to be called only from
switch.c (cross-chip notifiers emitted as a result of dynamic tag proto
changes), but the normal driver teardown code path wasn't replaced with
anything.

Solve this problem by adding a function that does the opposite of
dsa_switch_setup_tag_protocol(), which is called from the equivalent
spot in dsa_switch_teardown(). The positioning here also ensures that we
won't have any use-after-free in tagging protocol (*rcv) ops, since the
teardown sequence is as follows:

dsa_tree_teardown
-> dsa_tree_teardown_master
   -> dsa_master_teardown
      -> unsets master->dsa_ptr, making no further packets match the
         ETH_P_XDSA packet type handler
-> dsa_tree_teardown_ports
   -> dsa_port_teardown
      -> dsa_slave_destroy
         -> unregisters DSA net devices, there is even a synchronize_net()
            in unregister_netdevice_many()
-> dsa_tree_teardown_switches
   -> dsa_switch_teardown
      -> dsa_switch_teardown_tag_protocol
         -> finally frees the tagger-owned storage

Fixes: 7f297314 ("net: dsa: make tagging protocols connect to individual switches from a tree")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Saeed Mahameed <saeed@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221114143551.1906361-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

x25_lapb_receive_frame() using skb_copy() to get a private copy of
skb, the new skb should be freed in the undersized/fragmented skb
error handling path. Otherwise there is a memory leak.

Fixes: cb101ed2 ("x25: Handle undersized/fragmented skbs")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/20221114110519.514538-1-weiyongjun@huaweicloud.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If ag71xx_hw_enable() fails, call phylink_disconnect_phy() to clean up.
And if phylink_of_phy_connect() fails, nothing needs to be done.
Compile tested only.

Fixes: 892e0915 ("net: ag71xx: port to phylink")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20221114095549.40342-1-liujian56@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The bridge driver can offload VLANs to the underlying hardware either
via switchdev or the 8021q driver. When the former is used, the VLAN is
marked in the bridge driver with the 'BR_VLFLAG_ADDED_BY_SWITCHDEV'
private flag.

To avoid the memory leaks mentioned in the cited commit, the bridge
driver will try to delete a VLAN via the 8021q driver if the VLAN is not
marked with the previously mentioned flag.

When the VLAN protocol of the bridge changes, switchdev drivers are
notified via the 'SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL' attribute, but
the 8021q driver is also called to add the existing VLANs with the new
protocol and delete them with the old protocol.

In case the VLANs were offloaded via switchdev, the above behavior is
both redundant and buggy. Redundant because the VLANs are already
programmed in hardware and drivers that support VLAN protocol change
(currently only mlx5) change the protocol upon the switchdev attribute
notification. Buggy because the 8021q driver is called despite these
VLANs being marked with 'BR_VLFLAG_ADDED_BY_SWITCHDEV'. This leads to
memory leaks [1] when the VLANs are deleted.

Fix by not calling the 8021q driver for VLANs that were already
programmed via switchdev.

[1]
unreferenced object 0xffff8881f6771200 (size 256):
  comm "ip", pid 446855, jiffies 4298238841 (age 55.240s)
  hex dump (first 32 bytes):
    00 00 7f 0e 83 88 ff ff 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000012819ac>] vlan_vid_add+0x437/0x750
    [<00000000f2281fad>] __br_vlan_set_proto+0x289/0x920
    [<000000000632b56f>] br_changelink+0x3d6/0x13f0
    [<0000000089d25f04>] __rtnl_newlink+0x8ae/0x14c0
    [<00000000f6276baf>] rtnl_newlink+0x5f/0x90
    [<00000000746dc902>] rtnetlink_rcv_msg+0x336/0xa00
    [<000000001c2241c0>] netlink_rcv_skb+0x11d/0x340
    [<0000000010588814>] netlink_unicast+0x438/0x710
    [<00000000e1a4cd5c>] netlink_sendmsg+0x788/0xc40
    [<00000000e8992d4e>] sock_sendmsg+0xb0/0xe0
    [<00000000621b8f91>] ____sys_sendmsg+0x4ff/0x6d0
    [<000000000ea26996>] ___sys_sendmsg+0x12e/0x1b0
    [<00000000684f7e25>] __sys_sendmsg+0xab/0x130
    [<000000004538b104>] do_syscall_64+0x3d/0x90
    [<0000000091ed9678>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

Fixes: 27973793 ("net: bridge: Fix VLANs memory leak")
Reported-by: Vlad Buslov <vladbu@nvidia.com>
Tested-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20221114084509.860831-1-idosch@nvidia.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Hao Lan says:

====================
net: hns3: This series bugfix for the HNS3 ethernet driver.

This series includes some bugfix for the HNS3 ethernet driver.
Patch 1# fix incorrect hw rss hash type of rx packet.
Fixes: 79664077 ("net: hns3: support RXD advanced layout")
Fixes: 232fc64b ("net: hns3: Add HW RSS hash information to RX skb")
Fixes: ea485867 ("net: hns3: handle the BD info on the last BD of the packet")

Patch 2# fix return value check bug of rx copybreak.
Fixes: e74a726d ("net: hns3: refactor hns3_nic_reuse_page()")
Fixes: 99f6b5fb ("net: hns3: use bounce buffer when rx page can not be reused")

Patch 3# net: hns3: fix setting incorrect phy link ksettings
 for firmware in resetting process
Fixes: f5f2b3e4 ("net: hns3: add support for imp-controlled PHYs")
Fixes: c5ef83cb ("net: hns3: fix for phy_addr error in hclge_mac_mdio_config")
Fixes: 2312e050 ("net: hns3: Fix for deadlock problem occurring when unregistering ae_algo")
====================

Link: https://lore.kernel.org/r/20221114082048.49450-1-lanhao@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Currently, if driver is in phy-imp(phy controlled by imp firmware) mode, as
driver did not update phy link ksettings after initialization process or
not update advertising when getting phy link ksettings from firmware, it
may set incorrect phy link ksettings for firmware in resetting process.
So fix it.

Fixes: f5f2b3e4 ("net: hns3: add support for imp-controlled PHYs")
Fixes: c5ef83cb ("net: hns3: fix for phy_addr error in hclge_mac_mdio_config")
Fixes: 2312e050 ("net: hns3: Fix for deadlock problem occurring when unregistering ae_algo")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The refactoring of rx copybreak modifies the original return logic, which
will make this feature unavailable. So this patch fixes the return logic of
rx copybreak.

Fixes: e74a726d ("net: hns3: refactor hns3_nic_reuse_page()")
Fixes: 99f6b5fb ("net: hns3: use bounce buffer when rx page can not be reused")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Currently, the HNS3 driver reports the rss hash type
of each packet based on the rss hash tuples set. It
always reports PKT_HASH_TYPE_L4, without checking the
type of current packet. It's incorrect.
Fixes it by reporting it base on the packet type.

Fixes: 79664077 ("net: hns3: support RXD advanced layout")
Fixes: 232fc64b ("net: hns3: Add HW RSS hash information to RX skb")
Fixes: ea485867 ("net: hns3: handle the BD info on the last BD of the packet")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Sleep time is added to ensure the phy to be ready after loopback
bit was set. This to prevent the phy loopback test from failing.

Fixes: 020a45af ("net: phy: marvell: add Marvell specific PHY loopback")
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Signed-off-by: Aminuddin Jamaluddin <aminuddin.jamaluddin@intel.com>
Link: https://lore.kernel.org/r/20221114065302.10625-1-aminuddin.jamaluddin@intel.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The ena_init() won't destroy workqueue created by
create_singlethread_workqueue() when pci_register_driver() failed.
Call destroy_workqueue() when pci_register_driver() failed to prevent the
resource leak.

Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Acked-by: Shay Agroskin <shayagr@amazon.com>
Link: https://lore.kernel.org/r/20221114025659.124726-1-yuancan@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

sk->sk_receive_queue is protected by skb queue lock, but for KCM
sockets its RX path takes mux->rx_lock to protect more than just
skb queue. However, kcm_recvmsg() still only grabs the skb queue
lock, so race conditions still exist.

We can teach kcm_recvmsg() to grab mux->rx_lock too but this would
introduce a potential performance regression as struct kcm_mux can
be shared by multiple KCM sockets.

So we have to enforce skb queue lock in requeue_rx_msgs() and handle
skb peek case carefully in kcm_wait_data(). Fortunately,
skb_recv_datagram() already handles it nicely and is widely used by
other sockets, we can just switch to skb_recv_datagram() after
getting rid of the unnecessary sock lock in kcm_recvmsg() and
kcm_splice_read(). Side note: SOCK_DONE is not used by KCM sockets,
so it is safe to get rid of this check too.

I ran the original syzbot reproducer for 30 min without seeing any
issue.

Fixes: ab7ac4eb ("kcm: Kernel Connection Multiplexor module")
Reported-by: syzbot+278279efdd2730dd14bf@syzkaller.appspotmail.com
Reported-by: shaozhengchao <shaozhengchao@huawei.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/20221114005119.597905-1-xiyou.wangcong@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

A problem about ionic create debugfs failed is triggered with the
following log given:

 [  415.799514] debugfs: Directory 'ionic' with parent '/' already present!

The reason is that ionic_init_module() returns ionic_bus_register_driver()
directly without checking its return value, if ionic_bus_register_driver()
failed, it returns without destroy the newly created debugfs, resulting
the debugfs of ionic can never be created later.

 ionic_init_module()
   ionic_debugfs_create() # create debugfs directory
   ionic_bus_register_driver()
     pci_register_driver()
       driver_register()
         bus_add_driver()
           priv = kzalloc(...) # OOM happened
   # return without destroy debugfs directory

Fix by removing debugfs when ionic_bus_register_driver() returns error.

Fixes: fbfb8031 ("ionic: Add hardware init and device commands")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Acked-by: Shannon Nelson <snelson@pensando.io>
Link: https://lore.kernel.org/r/20221113092929.19161-1-yuancan@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

FDB entries that perform VXLAN encapsulation with an IPv6 underlay hold
a reference on a resource - the KVDL entry where the IPv6 underlay
destination IP is stored. For that, the driver maintains two hash tables:
1. Maps IPv6 to KVDL index
2. Maps {MAC, FID index} to IPv6 address

When a FDB entry is removed, the second table is used to find the relevant
IPv6 address and the first table is used to remove the reference count and
free the index if is not used anymore.

In order for a packet to be forwarded to a single remote VTEP, FDB
entries need to be configured at both the bridge and VXLAN devices' FDB
tables. Both entries are squashed into one {MAC, VLAN/VNI} -> IP entry
in the hardware. Therefore, in case one entry is removed, the entry will
be removed from the hardware and the remaining entry will be unmarked
with 'offload' flag since it is not offloaded anymore.

For example, the two FDB entries should be added to allow packets to be
forwarded via vx10:
$ bridge fdb add dev vx10 aa:bb:cc:dd:ee:ff self static dst 2001:db8:5::1
$ bridge fdb add dev vx10 aa:bb:cc:dd:ee:ff master static vlan 10

When one entry will be removed, the second one will not be offloaded
anymore. When the first entry (in VXLAN FDB) will be removed / will not be
offloaded anymore, the two mappings in IPv6 hash tables will be removed.

In case that the second entry is removed before the first one, unexpected
warnings[1][2] will be shown in user space as a result of removing the
first entry. The issue is that not offloaded entry is removed, the driver
tries to search the relevant entries in the hash tables, does not find them
and therefore warns.

Do not handle removing of not offloaded VXLAN FDB entries, as they were
already removed when the offload flag was removed.

[1]:
WARNING: CPU: 1 PID: 239 at drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.c:914 mlxsw_sp_nve_ipv6_addr_map_del+0x6b/0x80 [mlxsw_spectrum]
...
Hardware name: Mellanox Technologies Ltd. Mellanox switch/Mellanox switch, BIOS 4.6.5 05/21/2015
Workqueue: mlxsw_core_ordered mlxsw_sp_switchdev_vxlan_fdb_event_work [mlxsw_spectrum]
RIP: 0010:mlxsw_sp_nve_ipv6_addr_map_del+0x6b/0x80 [mlxsw_spectrum]
...
Call Trace:
  <TASK>
  mlxsw_sp_port_fdb_tunnel_uc_op+0x6cf/0x7b0 [mlxsw_spectrum]
  mlxsw_sp_switchdev_vxlan_fdb_event_work+0x17c/0x420 [mlxsw_spectrum]
  ? finish_task_switch.isra.0+0x8c/0x290
  process_one_work+0x1cd/0x390
  worker_thread+0x48/0x3c0
  ? process_one_work+0x390/0x390
  kthread+0xe0/0x110
  ? kthread_complete_and_exit+0x20/0x20
  ret_from_fork+0x1f/0x30
  </TASK>

[2]:
WARNING: CPU: 0 PID: 239 at drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3035 mlxsw_sp_ipv6_addr_put+0x142/0x220 [mlxsw_spectrum]
...
Hardware name: Mellanox Technologies Ltd. Mellanox switch/Mellanox switch, BIOS 4.6.5 05/21/2015
Workqueue: mlxsw_core_ordered mlxsw_sp_switchdev_vxlan_fdb_event_work [mlxsw_spectrum]
RIP: 0010:mlxsw_sp_ipv6_addr_put+0x142/0x220 [mlxsw_spectrum]
...
Call Trace:
  <TASK>
  ? mlxsw_sp_port_fdb_tun_uc_op6_sfd_write+0x5c1/0x610 [mlxsw_spectrum]
  mlxsw_sp_port_fdb_tunnel_uc_op+0x6ec/0x7b0 [mlxsw_spectrum]
  mlxsw_sp_switchdev_vxlan_fdb_event_work+0x17c/0x420 [mlxsw_spectrum]
  ? finish_task_switch.isra.0+0x8c/0x290
  process_one_work+0x1cd/0x390
  worker_thread+0x48/0x3c0
  ? process_one_work+0x390/0x390
  kthread+0xe0/0x110
  ? kthread_complete_and_exit+0x20/0x20
  ret_from_fork+0x1f/0x30
  </TASK>

Fixes: 0860c764 ("mlxsw: spectrum_nve: Keep track of IPv6 addresses used by FDB entries")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/c186de8cbd28e3eb661e06f31f7f2f2dff30020f.1668184350.git.petrm@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There are multi-generational drivers like mv88e6xxx which have code like
this:

int mv88e6xxx_port_hwtstamp_get(struct dsa_switch *ds, int port,
				struct ifreq *ifr)
{
	if (!chip->info->ptp_support)
		return -EOPNOTSUPP;

	...
}

DSA wants to deny PTP timestamping on the master if the switch supports
timestamping too. However it currently relies on the presence of the
port_hwtstamp_get() callback to determine PTP capability, and this
clearly does not work in that case (method is present but returns
-EOPNOTSUPP).

We should not deny PTP on the DSA master for those switches which truly
do not support hardware timestamping.

Create a dsa_port_supports_hwtstamp() method which actually probes for
support by calling port_hwtstamp_get() and seeing whether that returned
-EOPNOTSUPP or not.

Fixes: f685e609 ("net: dsa: Deny PTP on master if switch supports it")
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20221110124345.3901389-1-festevam@gmail.com/Reported-by: Fabio Estevam <festevam@gmail.com>
Reported-by: Steffen Bätz <steffen@innosonix.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

MHI driver registers network device without setting the
needs_free_netdev flag, and does NOT call free_netdev() when
unregisters network device, which causes a memory leak.

This patch calls free_netdev() to fix it since netdev_priv
is used after unregister.

Fixes: 13adac03 ("net: mhi_net: Register wwan_ops for link creation")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ziyang Xuan says:

====================
octeon_ep: fix several bugs in exception paths

Find several obvious bugs during code review in exception paths. Provide
this patchset to fix them. Not tested, just compiled.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

octep_get_mac_addr() can fail because send mbox message failed. If this
happens, octep_dev->mac_addr will be zero. It should not continue to
initialize. Add exception handling for octep_get_mac_addr() to fix it.

Fixes: 862cd659 ("octeon_ep: Add driver framework and device initialization")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When occur unsupported_dev and mbox init errors, it did not free oct->conf
and iounmap() oct->mmio[i].hw_addr. That would trigger memory leak problem.
Add kfree() for oct->conf and iounmap() for oct->mmio[i].hw_addr under
unsupported_dev and mbox init errors to fix the problem.

Fixes: 862cd659 ("octeon_ep: Add driver framework and device initialization")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

octep_get_link_status() can fail because send mbox message failed, then
octep_get_link_status() will return ret less than 0. Excute octep_link_up()
as long as ret is not equal to 0 in octep_open() now. That is not correct.

The value type of link.state is enum octep_ctrl_net_state. Positive value
represents up. Excute octep_link_up() when ret is bigger than 0.

Fixes: 862cd659 ("octeon_ep: Add driver framework and device initialization")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

octep_napi_add() and octep_napi_enable() are all after
netif_set_real_num_{tx,rx}_queues() in octep_open(), so it is unnecessary
napi rollback under set_queues_err. Delete them to fix it.

Fixes: 37d79d05 ("octeon_ep: add Tx/Rx processing and interrupt support")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When pci_register_driver failed, we need to remove debugfs,
which will caused a resource leak, fix it.

Resource leak logs as follows:
[   52.184456] debugfs: Directory 'bnxt_en' with parent '/' already present!

Fixes: cabfb09d ("bnxt_en: add debugfs support for DIM")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When connecting to client timeout, disconnect client for twice in
chnl_net_open(). Remove one. Compile tested only.

Fixes: 2aa40aef ("caif: Use link layer MTU instead of fixed MTU")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

hlist_for_each_entry_rcu() has built-in RCU and lock checking.

Pass cond argument to hlist_for_each_entry_rcu() to silence false
lockdep warning when CONFIG_PROVE_RCU_LIST is enabled.

Execute as follow:

 ip link add link eth0 type macvlan mode source macaddr add <MAC-ADDR>

The rtnl_lock is held when macvlan_hash_lookup_source() or
macvlan_fill_info_macaddr() are called in the non-RCU read side section.
So, pass lockdep_rtnl_is_held() to silence false lockdep warning.

Fixes: 79cf79ab ("macvlan: add source mode")
Signed-off-by: Chuang Wang <nashuiliang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We should not release reference by put_device() before calling device_initialize().

Fixes: e7d1d4d9 ("mISDN: fix possible memory leak in mISDN_register_device()")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When liquidio driver open failed, it doesn't release resources. Compile
tested only.

Fixes: 5b07aee1 ("liquidio: MSIX support for CN23XX")
Fixes: dbc97bfd ("net: liquidio: Add missing null pointer checks")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We're currently hitting the WARN_ON in mctp_i2c_flow_release:

    if (midev->release_count > midev->i2c_lock_count) {
        WARN_ONCE(1, "release count overflow");

This may be hit if we expire a flow before sending the first packet it
contains - as we will not be pairing the increment of release_count
(performed on flow release) with the i2c lock operation (only
performed on actual TX).

To fix this, only release a flow if we've encountered it previously (ie,
dev_flow_state does not indicate NEW), as we will mark the flow as
ACTIVE at the same time as accounting for the i2c lock operation. We
also need to add an INVALID flow state, to indicate when we've done the
release.

Fixes: f5b8abf9 ("mctp i2c: MCTP I2C binding driver")
Reported-by: Jian Zhang <zhangjian.3032@bytedance.com>
Tested-by: Jian Zhang <zhangjian.3032@bytedance.com>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20221110053135.329071-1-jk@codeconstruct.com.auSigned-off-by: Jakub Kicinski <kuba@kernel.org>

'aead_req' and 'aead_send' is allocated but not freed in default switch
case. This commit fixes the potential memory leak by freeing them under
the situation.

Note that the default cases here should never be reached as they'd
mean we allowed offloading an unsupported algorithm.

Fixes: ea7a9d88 ("net/tls: Use cipher sizes structs")
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://lore.kernel.org/r/20221110090329.2036382-1-liaoyu15@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When stmmac_xdp_release() is called, there is a possibility that tx
function is still running on other queues which will lead to tx queue
timed out and reset adapter.

This commit ensure that tx function is not running xdp before release
flow continue to run.

Fixes: ac746c85 ("net: stmmac: enhance XDP ZC driver level switching performance")
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Mohd Faizal Abdul Rahim <faizal.abdul.rahim@intel.com>
Signed-off-by: Noor Azura Ahmad Tarmizi <noor.azura.ahmad.tarmizi@intel.com>
Link: https://lore.kernel.org/r/20221110064552.22504-1-noor.azura.ahmad.tarmizi@linux.intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Current driver code will read device tree node information,
and set default values if there is no info provided.

This is not done in non-OF devices leading to SGMII fifo depths being
set to the smallest size.

This patch sets the value to the default value of the PHY as stated in the
PHY datasheet.

Fixes: 4dc08dcc ("net: phy: dp83867: introduce critical chip default init for non-of platform")
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221110054938.925347-1-michael.wei.hong.sit@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

A problem about hinic create debugfs failed is triggered with the
following log given:

 [  931.419023] debugfs: Directory 'hinic' with parent '/' already present!

The reason is that hinic_module_init() returns pci_register_driver()
directly without checking its return value, if pci_register_driver()
failed, it returns without destroy the newly created debugfs, resulting
the debugfs of hinic can never be created later.

 hinic_module_init()
   hinic_dbg_register_debugfs() # create debugfs directory
   pci_register_driver()
     driver_register()
       bus_add_driver()
         priv = kzalloc(...) # OOM happened
   # return without destroy debugfs directory

Fix by removing debugfs when pci_register_driver() returns error.

Fixes: 253ac3a9 ("hinic: add support to query sq info")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20221110021642.80378-1-yuancan@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Afer commit 1fa5ae85 ("driver core: get rid of struct device's
bus_id string array"), the name of device is allocated dynamically,
use put_device() to give up the reference, so that the name can be
freed in kobject_cleanup() when the refcount is 0.

The 'entry' is going to be freed in mISDN_dsp_dev_release(), so the
kfree() is removed. list_del() is called in mISDN_dsp_dev_release(),
so it need be initialized.

Fixes: 1fa5ae85 ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221109132832.3270119-1-yangyingliang@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

netdev is allocated in bgmac_alloc() with devm_alloc_etherdev() and will
be auto released in ->remove and ->probe failure path. Using free_netdev()
in bgmac_enet_remove() leads to double free.

Fixes: 34a5102c ("net: bgmac: allocate struct bgmac just once & don't copy it")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>

Link: https://lore.kernel.org/r/20221109150136.2991171-1-weiyongjun@huaweicloud.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Andrii Nakryiko says:

====================
bpf 2022-11-11

We've added 11 non-merge commits during the last 8 day(s) which contain
a total of 11 files changed, 83 insertions(+), 74 deletions(-).

The main changes are:

1) Fix strncpy_from_kernel_nofault() to prevent out-of-bounds writes,
   from Alban Crequy.

2) Fix for bpf_prog_test_run_skb() to prevent wrong alignment,
   from Baisong Zhong.

3) Switch BPF_DISPATCHER to static_call() instead of ftrace infra, with
   a small build fix on top, from Peter Zijlstra and Nathan Chancellor.

4) Fix memory leak in BPF verifier in some error cases, from Wang Yufen.

5) 32-bit compilation error fixes for BPF selftests, from Pu Lehui and
   Yang Jihong.

6) Ensure even distribution of per-CPU free list elements, from Xu Kuohai.

7) Fix copy_map_value() to track special zeroed out areas properly,
   from Xu Kuohai.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf: Fix offset calculation error in __copy_map_value and zero_map_value
  bpf: Initialize same number of free nodes for each pcpu_freelist
  selftests: bpf: Add a test when bpf_probe_read_kernel_str() returns EFAULT
  maccess: Fix writing offset in case of fault in strncpy_from_kernel_nofault()
  selftests/bpf: Fix test_progs compilation failure in 32-bit arch
  selftests/bpf: Fix casting error when cross-compiling test_verifier for 32-bit platforms
  bpf: Fix memory leaks in __check_func_call
  bpf: Add explicit cast to 'void *' for __BPF_DISPATCHER_UPDATE()
  bpf: Convert BPF_DISPATCHER to use static_call() (not ftrace)
  bpf: Revert ("Fix dispatcher patchable function entry to 5 bytes nop")
  bpf, test_run: Fix alignment problem in bpf_prog_test_run_skb()
====================

Link: https://lore.kernel.org/r/20221111231624.938829-1-andrii@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Function __copy_map_value and zero_map_value miscalculated copy offset,
resulting in possible copy of unwanted data to user or kernel.

Fix it.

Fixes: cc487558 ("bpf: Add zero_map_value to zero map value with special fields")
Fixes: 4d7d7f69 ("bpf: Adapt copy_map_value for multiple offset case")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20221111125620.754855-1-xukuohai@huaweicloud.com

pcpu_freelist_populate() initializes nr_elems / num_possible_cpus() + 1
free nodes for some CPUs, and then possibly one CPU with fewer nodes,
followed by remaining cpus with 0 nodes. For example, when nr_elems == 256
and num_possible_cpus() == 32, CPU 0~27 each gets 9 free nodes, CPU 28 gets
4 free nodes, CPU 29~31 get 0 free nodes, while in fact each CPU should get
8 nodes equally.

This patch initializes nr_elems / num_possible_cpus() free nodes for each
CPU firstly, then allocates the remaining free nodes by one for each CPU
until no free nodes left.

Fixes: e19494ed ("bpf: introduce percpu_freelist")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20221110122128.105214-1-xukuohai@huawei.com