- 30 Jul, 2014 18 commits
-
-
Johan Hedberg authored
The HCI_PAIRABLE flag isn't actually controlling whether we're pairable but whether we're bondable. Therefore, rename it accordingly. Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org>
-
Marcel Holtmann authored
The new leds bit handling produces this spares warning. CHECK net/bluetooth/hidp/core.c net/bluetooth/hidp/core.c:156:60: warning: dubious: x | !y Just fix it by doing an explicit x << 0 shift operation. Signed-off-by:
-
Johan Hedberg authored
Both BT_CONNECTED and BT_CONFIG state mean that we have a baseband link available. We should therefore check for either of these when pairing and deciding whether to call hci_conn_security() directly. Signed-off-by:
-
Varka Bhadram authored
This patch removes the unused function. Signed-off-by:
Varka Bhadram <varkab@cdac.in> Signed-off-by:
-
Varka Bhadram authored
This patch removes the unused macros. Signed-off-by:
-
Marcel Holtmann authored
CHECK: Alignment should match open parenthesis + if (((hdr->flow_lbl[0] & 0x0F) == 0) && + (hdr->flow_lbl[1] == 0) && (hdr->flow_lbl[2] == 0)) { CHECK: Alignment should match open parenthesis + if ((hdr->priority == 0) && + ((hdr->flow_lbl[0] & 0xF0) == 0)) { CHECK: Alignment should match open parenthesis + if ((hdr->priority == 0) && + ((hdr->flow_lbl[0] & 0xF0) == 0)) { Signed-off-by: -
Marcel Holtmann authored
CHECK: braces {} should be used on all arms of this statement + if ((iphc0 & 0x03) != LOWPAN_IPHC_TTL_I) [...] + else { [...] Signed-off-by: -
Marcel Holtmann authored
WARNING: Missing a blank line after declarations + struct sk_buff *new; + if (uncompress_udp_header(skb, &uh)) Signed-off-by:
-
Marcel Holtmann authored
This patch fixes all the issues with alignment matching of open parenthesis found by checkpatch.pl and makes them follow the network coding style now. CHECK: Alignment should match open parenthesis +static int uncompress_addr(struct sk_buff *skb, + struct in6_addr *ipaddr, const u8 address_mode, CHECK: Alignment should match open parenthesis +static int uncompress_context_based_src_addr(struct sk_buff *skb, + struct in6_addr *ipaddr, CHECK: Alignment should match open parenthesis +static int skb_deliver(struct sk_buff *skb, struct ipv6hdr *hdr, + struct net_device *dev, skb_delivery_cb deliver_skb) CHECK: Alignment should match open parenthesis + new = skb_copy_expand(skb, sizeof(struct ipv6hdr), skb_tailroom(skb), + GFP_ATOMIC); CHECK: Alignment should match open parenthesis + raw_dump_table(__func__, "raw skb data dump before receiving", + new->data, new->len); CHECK: Alignment should match open parenthesis +lowpan_uncompress_multicast_daddr(struct sk_buff *skb, + struct in6_addr *ipaddr, CHECK: Alignment should match open parenthesis + raw_dump_inline(NULL, "Reconstructed ipv6 multicast addr is", + ipaddr->s6_addr, 16); CHECK: Alignment should match open parenthesis +int lowpan_process_data(struct sk_buff *skb, struct net_device *dev, + const u8 *saddr, const u8 saddr_type, const u8 saddr_len, CHECK: Alignment should match open parenthesis + raw_dump_table(__func__, "raw skb data dump uncompressed", + skb->data, skb->len); CHECK: Alignment should match open parenthesis + err = uncompress_addr(skb, &hdr.saddr, tmp, saddr, + saddr_type, saddr_len); CHECK: Alignment should match open parenthesis + err = uncompress_addr(skb, &hdr.daddr, tmp, daddr, + daddr_type, daddr_len); CHECK: Alignment should match open parenthesis + pr_debug("dest: stateless compression mode %d dest %pI6c\n", + tmp, &hdr.daddr); CHECK: Alignment should match open parenthesis + raw_dump_table(__func__, "raw UDP header dump", + (u8 *)&uh, sizeof(uh)); CHECK: Alignment should match open parenthesis + raw_dump_table(__func__, "raw header dump", (u8 *)&hdr, + sizeof(hdr)); CHECK: Alignment should match open parenthesis +int lowpan_header_compress(struct sk_buff *skb, struct net_device *dev, + unsigned short type, const void *_daddr, CHECK: Alignment should match open parenthesis + raw_dump_table(__func__, "raw skb network header dump", + skb_network_header(skb), sizeof(struct ipv6hdr)); CHECK: Alignment should match open parenthesis + raw_dump_table(__func__, + "sending raw skb network uncompressed packet", CHECK: Alignment should match open parenthesis + if (((hdr->flow_lbl[0] & 0x0F) == 0) && + (hdr->flow_lbl[1] == 0) && (hdr->flow_lbl[2] == 0)) { WARNING: quoted string split across lines + pr_debug("dest address unicast link-local %pI6c " + "iphc1 0x%02x\n", &hdr->daddr, iphc1); CHECK: Alignment should match open parenthesis + raw_dump_table(__func__, "raw skb data dump compressed", + skb->data, skb->len); Signed-off-by: -
Marcel Holtmann authored
This patch fixes all the block comment issues found by checkpatch.pl and makes them match the network style now. WARNING: networking block comments don't use an empty /* line, use /* Comment... +/* + * Based on patches from Jon Smirl <jonsmirl@gmail.com> WARNING: networking block comments don't use an empty /* line, use /* Comment... +/* + * Uncompress address function for source and WARNING: networking block comments don't use an empty /* line, use /* Comment... +/* + * Uncompress address function for source context WARNING: networking block comments don't use an empty /* line, use /* Comment... + /* + * UDP lenght needs to be infered from the lower layers WARNING: networking block comments don't use an empty /* line, use /* Comment... + /* + * Traffic Class and FLow Label carried in-line WARNING: networking block comments don't use an empty /* line, use /* Comment... + /* + * Traffic class carried in-line WARNING: networking block comments don't use an empty /* line, use /* Comment... + /* + * Flow Label carried in-line WARNING: networking block comments don't use an empty /* line, use /* Comment... + /* + * replace the compressed UDP head by the uncompressed UDP WARNING: networking block comments don't use an empty /* line, use /* Comment... + /* + * As we copy some bit-length fields, in the IPHC encoding bytes, WARNING: networking block comments don't use an empty /* line, use /* Comment... + /* + * Traffic class, flow label WARNING: networking block comments don't use an empty /* line, use /* Comment... + /* + * Hop limit Signed-off-by:
-
Alexander Aring authored
This define is unused since commit 96cb3eb7 ("6lowpan: fix fragmentation on sending side"). It is a worst case scenario for payload calculation. Since commit 96cb3eb7 we calculation the payload to use the optimal size. This define is also necessary for ieee802154 6lowpan only and the file include/net/6lowpan.h should contain generic 6lowpan things only. Signed-off-by:
Alexander Aring <alex.aring@gmail.com> Signed-off-by:
-
Alexander Aring authored
This memory is placed on stack and can't be null so remove the check on null. Signed-off-by:
-
Alexander Aring authored
This patch removes the own implementation to check of link-layer, broadcast and any address type and use the IPv6 api for that. Signed-off-by:
-
Alexander Aring authored
This patch uses the lowpan_push_hc_data functions in several places where we can use it. The lowpan_push_hc_data was introduced in some previous patches. Signed-off-by:
-
Alexander Aring authored
We introduced the lowpan_fetch_skb function in some previous patches for 6lowpan to have a generic fetch function. This patch drops the old function and use the generic lowpan_fetch_skb one. Signed-off-by:
-
Alexander Aring authored
Signed-off-by:
-
Alexander Aring authored
The hc06_ptr pointer variable stands for header compression draft-06. We are mostly rfc complaint. This patch rename the variable to normal hc_ptr. Signed-off-by:
-
Johan Hedberg authored
The HCI_CONN_LE_SMP_PEND flag is supposed to indicate whether we have an SMP context or not. If the context creation fails, or some other error is indicated between setting the flag and creating the context the flag must be cleared first. This patch ensures that smp_chan_create() clears the flag in case of allocation failure as well as reorders code in smp_cmd_security_req() that could lead to returning an error between setting the flag and creating the context. Without the patch the following kind of kernel crash could be observed (this one because of unacceptable authentication requirements in a Security Request): [ +0.000855] kernel BUG at net/bluetooth/smp.c:606! [ +0.000000] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC [ +0.000000] CPU: 0 PID: 58 Comm: kworker/u5:2 Tainted: G W 3.16.0-rc1+ #785 [ +0.008391] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ +0.000000] Workqueue: hci0 hci_rx_work [ +0.000000] task: f4dc8f90 ti: f4ef0000 task.ti: f4ef0000 [ +0.000000] EIP: 0060:[<c13432b6>] EFLAGS: 00010246 CPU: 0 [ +0.000000] EIP is at smp_chan_destroy+0x1e/0x145 [ +0.000709] EAX: f46db870 EBX: 00000000 ECX: 00000000 EDX: 00000005 [ +0.000000] ESI: f46db870 EDI: f46db870 EBP: f4ef1dc0 ESP: f4ef1db0 [ +0.000000] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ +0.000000] CR0: 8005003b CR2: b666b0b0 CR3: 00022000 CR4: 00000690 [ +0.000000] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ +0.000000] DR6: fffe0ff0 DR7: 00000400 [ +0.000000] Stack: [ +0.000000] 00000005 f17b7840 f46db870 f4ef1dd4 f4ef1de4 c1343441 c134342e 00000000 [ +0.000000] c1343441 00000005 00000002 00000000 f17b7840 f4ef1e38 c134452a 00002aae [ +0.000000] 01ef1e00 00002aae f46bd980 f46db870 00000039 ffffffff 00000007 f4ef1e34 [ +0.000000] Call Trace: [ +0.000000] [<c1343441>] smp_failure+0x64/0x6c [ +0.000000] [<c134342e>] ? smp_failure+0x51/0x6c [ +0.000000] [<c1343441>] ? smp_failure+0x64/0x6c [ +0.000000] [<c134452a>] smp_sig_channel+0xad6/0xafc [ +0.000000] [<c1053b61>] ? vprintk_emit+0x343/0x366 [ +0.000000] [<c133f34e>] l2cap_recv_frame+0x1337/0x1ac4 [ +0.000000] [<c133f34e>] ? l2cap_recv_frame+0x1337/0x1ac4 [ +0.000000] [<c1172307>] ? __dynamic_pr_debug+0x3e/0x40 [ +0.000000] [<c11702a1>] ? debug_smp_processor_id+0x12/0x14 [ +0.000000] [<c1340bc9>] l2cap_recv_acldata+0xe8/0x239 [ +0.000000] [<c1340bc9>] ? l2cap_recv_acldata+0xe8/0x239 [ +0.000000] [<c1169931>] ? __const_udelay+0x1a/0x1c [ +0.000000] [<c131f120>] hci_rx_work+0x1a1/0x286 [ +0.000000] [<c137244e>] ? mutex_unlock+0x8/0xa [ +0.000000] [<c131f120>] ? hci_rx_work+0x1a1/0x286 [ +0.000000] [<c1038fe5>] process_one_work+0x128/0x1df [ +0.000000] [<c1038fe5>] ? process_one_work+0x128/0x1df [ +0.000000] [<c10392df>] worker_thread+0x222/0x2de [ +0.000000] [<c10390bd>] ? process_scheduled_works+0x21/0x21 [ +0.000000] [<c103d34c>] kthread+0x82/0x87 [ +0.000000] [<c1040000>] ? create_new_namespaces+0x90/0x105 [ +0.000000] [<c13738e1>] ret_from_kernel_thread+0x21/0x30 [ +0.000000] [<c103d2ca>] ? __kthread_parkme+0x50/0x50 [ +0.000000] Code: 65 f4 89 f0 5b 5e 5f 5d 8d 67 f8 5f c3 57 8d 7c 24 08 83 e4 f8 ff 77 fc 55 89 e5 57 89 c7 56 53 52 8b 98 e0 00 00 00 85 db 75 02 <0f> 0b 8b b3 80 00 00 00 8b 00 c1 ee 03 83 e6 01 89 f2 e8 ef 09 [ +0.000000] EIP: [<c13432b6>] smp_chan_destroy+0x1e/0x145 SS:ESP 0068:f4ef1db0 Signed-off-by:
-
- 29 Jul, 2014 10 commits
-
-
Hans de Goede authored
It has taken me a long long time to get the OOB interrupt working on the AP6210 sdio wifi/bt module found on various Allwinner A20 boards. In the end I found these magic register pokes in the cubietruck kernel tree: https://github.com/cubieboard2/linux-sunxi/commit/7f08ba395617d17e7a711507503d89a50406fe7a This is also done for the bcm43362 in broadcom's internal/proprietary driver. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Arend van Spriel <arend@broadcom.com> [arend@broadcom.com: rebased changing BCM43362 chip id to fix compilation] Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
Not doing so, could fail on device probing when use_chanctx module param is set to true. Signed-off-by:
Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
-
Rafał Miłecki authored
It contains radio 0x2057 rev 14 just like a BCM43217, so it doesn't require any magic. The main difference is that BCM4313 is 1x1:1. Signed-off-by:
-
Hans de Goede authored
Signed-off-by:
-
Chen-Yu Tsai authored
brcmfmac devices can use an out-of-band interrupt on a GPIO line. Currently this is specified using platform data. Add support for specifying out-of-band interrupt via device tree. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> [arend@broadcom.com: conditionalize more of-code, use driver debug routines] Signed-off-by:
-
Arend van Spriel authored
The Broadcom bcm43xx sdio devices are fullmac devices that may be integrated in ARM platforms. Currently, the brcmfmac driver for these devices support use of platform data. This patch specifies the bindings that allow this platform data to be expressed in the devicetree. Reviewed-by:
Hante Meuleman <meuleman@broadcom.com> Reviewed-by:
Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by:
Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by:
-
John W. Linville authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-nextJohn W. Linville authored
Samuel Ortiz <sameo@linux.intel.com> says: "NFC: 3.17 pull request This is the NFC pull request for 3.17. This is a rather quiet one, we have: - A new driver from ST Microelectronics for their NCI ST21NFCB, including device tree support. - p2p support for the ST21NFCA driver - A few fixes an enhancements for the NFC digital layer" Signed-off-by:
-
- 28 Jul, 2014 3 commits
-
-
Johan Hedberg authored
If we have entries in the whitelist we shouldn't disable page scanning when disabling connectable mode. This patch adds the necessary check to the Set Connectable command handler. Signed-off-by:
-
Johan Hedberg authored
This patch fixes a typo in the hci_cc_write_scan_enable() function where we want to clear the HCI_PSCAN flag if the SCAN_PAGE bit of the HCI command parameter was not set. Signed-off-by:
-
Alexander Aring authored
Since commit 68d96dcf ("MAINTAINERS: add net/6lowpan/ maintainer entry") we have a 6lowpan branch. This patch adds a forgotten file which should also be maintained by this branch. Signed-off-by:
-
- 27 Jul, 2014 1 commit
-
-
Marcel Holtmann authored
With the Bluetooth 4.1 specification the Simultaneous LE and BR/EDR controller option has been deprecated. It shall be set to zero and ignored otherwise. Signed-off-by:
-
- 26 Jul, 2014 4 commits
-
-
Georg Lukas authored
Expose the default values for minimum and maximum LE advertising interval via debugfs for testing purposes. Signed-off-by:
Georg Lukas <georg@op-co.de> Signed-off-by:
-
Georg Lukas authored
Store the default values for minimum and maximum advertising interval with all the other controller defaults. These vaules are sent to the adapter whenever advertising is (re)enabled. Signed-off-by:
-
Marcel Holtmann authored
Devices using resolvable private addresses are required to provide an identity resolving key. These devices can not be found using the current controller white list support. This means if the kernel knows about any devices with an identity resolving key, the white list filtering must be disabled. However so far the kernel kept identity resolving keys around even for devices that are not using resolvable private addresses. The notification to userspace clearly hints to not store the key and so it is best to just remove the key from the kernel as well at that point. With this it easy now to detect when using the white list is possible or when kernel side resolving of addresses is required. Signed-off-by:
-
Marcel Holtmann authored
The Bluetooth controller can use a white list filter when scanning to avoid waking up the host for devices that are of no interest. Devices marked as reporting, direct connection (incoming) or general connection are now added to the controller white list. The update of the white list happens just before enabling passive scanning. In case the white list is full and can not hold all devices, the white list is not used and the filter policy set to accept all advertisements. Using the white list for scanning allows for power saving with controllers that do not handle the duplicate filtering correctly. Signed-off-by:
-
- 25 Jul, 2014 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessJohn W. Linville authored
Conflicts: net/mac80211/cfg.c Signed-off-by: -
Janusz Dziedzic authored
In case of A-MSDU RX we should check attention flags correctly to be sure we report correct FCS status for A-MSDU subframes. Without a patch we could report A-MSDU subframes with wrong FCS as a correct to the stack, next get a lot of DUP ACK TCP packets. Finally TP drop is seen and this drop depends on FCS errors ratio for A-MSDU frame. Example test case when TP drop is seen: - ath10k configured as an AP - used ath10k station - forced A-MSDU (7 frames) on STA - other traffic on channel (often FCS errors) - monitor iface added on AP - TCP STA -> AP traffic (iperf) a) Iperf logs for case without the patch: echo "1 64" > htt_max_amsdu_ampdu // disable A-MSDU [ ID] Interval Transfer Bandwidth [ 3] 0.0- 5.0 sec 56.6 MBytes 95.0 Mbits/sec [ 3] 5.0-10.0 sec 60.4 MBytes 101 Mbits/sec [ 3] 10.0-15.0 sec 60.2 MBytes 101 Mbits/sec [ 3] 15.0-20.0 sec 60.2 MBytes 101 Mbits/sec [ 3] 20.0-25.0 sec 63.8 MBytes 107 Mbits/sec [ 3] 25.0-30.0 sec 64.9 MBytes 109 Mbits/sec echo "7 64" > htt_max_amsdu_ampdu // set 7 A-MSDU subframes [ 3] 30.0-35.0 sec 40.0 MBytes 67.1 Mbits/sec [ 3] 35.0-40.0 sec 35.9 MBytes 60.2 Mbits/sec [ 3] 40.0-45.0 sec 36.9 MBytes 61.9 Mbits/sec [ 3] 45.0-50.0 sec 37.9 MBytes 63.5 Mbits/sec [ 3] 50.0-55.0 sec 34.5 MBytes 57.9 Mbits/sec [ 3] 55.0-60.0 sec 25.4 MBytes 42.6 Mbits/sec [ 3] 60.0-65.0 sec 48.2 MBytes 81.0 Mbits/sec [ 3] 65.0-70.0 sec 28.8 MBytes 48.2 Mbits/sec [ 3] 70.0-75.0 sec 29.2 MBytes 49.1 Mbits/sec [ 3] 75.0-80.0 sec 22.9 MBytes 38.4 Mbits/sec [ 3] 80.0-85.0 sec 26.4 MBytes 44.2 Mbits/sec [ 3] 85.0-90.0 sec 31.5 MBytes 52.8 Mbits/sec b) Iperf logs for case with patch: echo "1 64" > htt_max_amsdu_ampdu // disable A-MSDU [ 3] local 192.168.12.2 port 57512 connected with 192.168.12.1 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0- 5.0 sec 60.8 MBytes 102 Mbits/sec [ 3] 5.0-10.0 sec 62.2 MBytes 104 Mbits/sec [ 3] 10.0-15.0 sec 60.9 MBytes 102 Mbits/sec echo "7 64" > htt_max_amsdu_ampdu // set 7 A-MSDU subframes [ 3] 15.0-20.0 sec 68.1 MBytes 114 Mbits/sec [ 3] 20.0-25.0 sec 80.5 MBytes 135 Mbits/sec [ 3] 25.0-30.0 sec 83.0 MBytes 139 Mbits/sec [ 3] 30.0-35.0 sec 79.1 MBytes 133 Mbits/sec [ 3] 35.0-40.0 sec 77.1 MBytes 129 Mbits/sec [ 3] 40.0-45.0 sec 77.4 MBytes 130 Mbits/sec Reported-by:
Denton Gentry <denton.gentry@gmail.com> Signed-off-by:
Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com>
-
Michal Kazior authored
The 10.x firmware does not support IBSS mode at all. It can't beacon and it crashes when trying to scan. Signed-off-by:
Michal Kazior <michal.kazior@tieto.com> Signed-off-by:
-
Michal Kazior authored
Firmware doesn't perform Rx reordering so it is left to the host driver to do that. Use mac80211 to perform reordering instead of re-inventing the wheel. This fixes TCP throughput issues in some environments. Reported-by:
-
