- 01 Jul, 2021 40 commits
-
-
Geert Uytterhoeven authored
make dtbs_check: ethernet-ebi2@2,0: $nodename:0: 'ethernet-ebi2@2,0' does not match '^ethernet(@.*)?$' ethernet-ebi2@2,0: 'smsc,irq-active-low' does not match any of the regexes: 'pinctrl-[0-9]+' There is no "smsc,irq-active-low" property, as active low is the default. Signed-off-by:Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Accesses to unix_sk(sk)->gso_size are lockless. Add READ_ONCE()/WRITE_ONCE() around them. BUG: KCSAN: data-race in udp_lib_setsockopt / udpv6_sendmsg write to 0xffff88812d78f47c of 2 bytes by task 10849 on cpu 1: udp_lib_setsockopt+0x3b3/0x710 net/ipv4/udp.c:2696 udpv6_setsockopt+0x63/0x90 net/ipv6/udp.c:1630 sock_common_setsockopt+0x5d/0x70 net/core/sock.c:3265 __sys_setsockopt+0x18f/0x200 net/socket.c:2104 __do_sys_setsockopt net/socket.c:2115 [inline] __se_sys_setsockopt net/socket.c:2112 [inline] __x64_sys_setsockopt+0x62/0x70 net/socket.c:2112 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff88812d78f47c of 2 bytes by task 10852 on cpu 0: udpv6_sendmsg+0x161/0x16b0 net/ipv6/udp.c:1299 inet6_sendmsg+0x5f/0x80 net/ipv6/af_inet6.c:642 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2337 ___sys_sendmsg net/socket.c:2391 [inline] __sys_sendmmsg+0x315/0x4b0 net/socket.c:2477 __do_sys_sendmmsg net/socket.c:2506 [inline] __se_sys_sendmmsg net/socket.c:2503 [inline] __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2503 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x0000 -> 0x0005 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 10852 Comm: syz-executor.0 Not tainted 5.13.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: bec1f6f6 ("udp: generate gso with UDP_SEGMENT") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Paolo Abeni authored
The MPTCP receive path is hooked only into the TCP slow-path. The DSS presence allows plain MPTCP traffic to hit that consistently. Since commit e1ff9e82 ("net: mptcp: improve fallback to TCP"), when an MPTCP socket falls back to TCP, it can hit the TCP receive fast-path, and delay or stop triggering the event notification. Address the issue explicitly disabling the header prediction for MPTCP sockets. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/200 Fixes: e1ff9e82 ("net: mptcp: improve fallback to TCP") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
-
Christoph Hellwig authored
The caif_hsi driver relies on a cfhsi_get_ops symbol using symbol_get, but this symbol is not provided anywhere in the kernel tree. Remove this driver given that it is dead code. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Xin Long authored
kernel-doc for TIPC is too simple, we need to add more information for it. This patch is to extend the abstract, and add the Features and Links items. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Jon Maloy <jmaloy@redhat.com> Signed-off-by:
-
Sukadev Bhattiprolu authored
Normally, if a reset fails due to failover or other communication error there is another reset (eg: FAILOVER) in the queue and we would process that reset. But if we are unable to communicate with PHYP or VIOS after H_FREE_CRQ, there would be no other resets in the queue and the adapter would be in an undefined state even though it was in the OPEN state earlier. While starting the reset we set the carrier to off state so we won't even get the timeout resets. If the last queued reset fails, retry it as a hard reset (after the usual 60 second settling time). Signed-off-by:
Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by:
Dany Madden <drt@linux.ibm.com> Signed-off-by:
-
David S. Miller authored
Yangbo Lu says: ==================== ptp: support virtual clocks and timestamping Current PTP driver exposes one PTP device to user which binds network interface/interfaces to provide timestamping. Actually we have a way utilizing timecounter/cyclecounter to virtualize any number of PTP clocks based on a same free running physical clock for using. The purpose of having multiple PTP virtual clocks is for user space to directly/easily use them for multiple domains synchronization. user space: ^ ^ | SO_TIMESTAMPING new flag: | Packets with | SOF_TIMESTAMPING_BIND_PHC | TX/RX HW timestamps v v +--------------------------------------------+ sock: | sock (new member sk_bind_phc) | +--------------------------------------------+ ^ ^ | ethtool_get_phc_vclocks | Convert HW timestamps | | to sk_bind_phc v v +--------------+--------------+--------------+ vclock: | ptp1 | ptp2 | ptpN | +--------------+--------------+--------------+ pclock: | ptp0 free running | +--------------------------------------------+ The block diagram may explain how it works. Besides the PTP virtual clocks, the packet HW timestamp converting to the bound PHC is also done in sock driver. For user space, PTP virtual clocks can be created via sysfs, and extended SO_TIMESTAMPING API (new flag SOF_TIMESTAMPING_BIND_PHC) can be used to bind one PTP virtual clock for timestamping. The test tool timestamping.c (together with linuxptp phc_ctl tool) can be used to verify: # echo 4 > /sys/class/ptp/ptp0/n_vclocks [ 129.399472] ptp ptp0: new virtual clock ptp2 [ 129.404234] ptp ptp0: new virtual clock ptp3 [ 129.409532] ptp ptp0: new virtual clock ptp4 [ 129.413942] ptp ptp0: new virtual clock ptp5 [ 129.418257] ptp ptp0: guarantee physical clock free running # # phc_ctl /dev/ptp2 set 10000 # phc_ctl /dev/ptp3 set 20000 # # timestamping eno0 2 SOF_TIMESTAMPING_TX_HARDWARE SOF_TIMESTAMPING_RAW_HARDWARE SOF_TIMESTAMPING_BIND_PHC # timestamping eno0 2 SOF_TIMESTAMPING_RX_HARDWARE SOF_TIMESTAMPING_RAW_HARDWARE SOF_TIMESTAMPING_BIND_PHC # timestamping eno0 3 SOF_TIMESTAMPING_TX_HARDWARE SOF_TIMESTAMPING_RAW_HARDWARE SOF_TIMESTAMPING_BIND_PHC # timestamping eno0 3 SOF_TIMESTAMPING_RX_HARDWARE SOF_TIMESTAMPING_RAW_HARDWARE SOF_TIMESTAMPING_BIND_PHC Changes for v2: - Converted to num_vclocks for creating virtual clocks. - Guranteed physical clock free running when using virtual clocks. - Fixed build warning. - Updated copyright. Changes for v3: - Supported PTP virtual clock in default in PTP driver. - Protected concurrency of ptp->num_vclocks accessing. - Supported PHC vclocks query via ethtool. - Extended SO_TIMESTAMPING API for PHC binding. - Converted HW timestamps to PHC bound, instead of previous binding domain value to PHC idea. - Other minor fixes. Changes for v4: - Used do_aux_work callback for vclock refreshing instead. - Used unsigned int for vclocks number, and max_vclocks for limitiation. - Fixed mutex locking. - Dynamically allocated memory for vclock index storage. - Removed ethtool ioctl command for vclocks getting. - Updated doc for ethtool phc vclocks get. - Converted to mptcp_setsockopt_sol_socket_timestamping(). - Passed so_timestamping for sock_set_timestamping. - Fixed checkpatch/build. - Other minor fixed. Changes for v5: - Fixed checkpatch/build/bug reported by test robot. ==================== Signed-off-by: -
Yangbo Lu authored
Add entry for PTP virtual clock driver. Signed-off-by:
Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by:
-
Yangbo Lu authored
Support binding PHC of PTP vclock for timestamping. Signed-off-by:
-
Yangbo Lu authored
This patch is to support hardware timestamp conversion to PHC bound. This applies to both RX and TX since their skb handling (for TX, it's skb clone in error queue) all goes through __sock_recv_timestamp. Signed-off-by:
-
Yangbo Lu authored
Since PTP virtual clock support is added, there can be several PTP virtual clocks based on one PTP physical clock for timestamping. This patch is to extend SO_TIMESTAMPING API to support PHC (PTP Hardware Clock) binding by adding a new flag SOF_TIMESTAMPING_BIND_PHC. When PTP virtual clocks are in use, user space can configure to bind one for timestamping, but PTP physical clock is not supported and not needed to bind. This patch is preparation for timestamp conversion from raw timestamp to a specific PTP virtual clock time in core net. Signed-off-by:
-
Yangbo Lu authored
Split timestamping handling into a new function mptcp_setsockopt_sol_socket_timestamping(). This is preparation for extending SO_TIMESTAMPING for PHC binding, since optval will no longer be integer. Signed-off-by:
-
Yangbo Lu authored
Add kernel API ptp_convert_timestamp() to convert raw hardware timestamp to a specified ptp vclock time. Signed-off-by:
-
Yangbo Lu authored
Add an interface for getting PHC (PTP Hardware Clock) virtual clocks, which are based on PHC physical clock providing hardware timestamp to network packets. Signed-off-by:
-
Yangbo Lu authored
Add kernel API ptp_get_vclocks_index() to get all ptp vclocks index on pclock. This is preparation for supporting ptp vclocks info query through ethtool. Signed-off-by:
-
Yangbo Lu authored
Track available ptp vclocks information. Record index values of available ptp vclocks during registering and unregistering. This is preparation for supporting ptp vclocks info query through ethtool. Signed-off-by:
-
Yangbo Lu authored
Support ptp physical/virtual clocks conversion via sysfs. There will be a new attribute n_vclocks under ptp physical clock sysfs. - In default, the value is 0 meaning only ptp physical clock is in use. - Setting the value can create corresponding number of ptp virtual clocks to use. But current physical clock is guaranteed to stay free running. - Setting the value back to 0 can delete virtual clocks and back use physical clock again. Another new attribute max_vclocks control the maximum number of ptp vclocks. Signed-off-by:
-
Yangbo Lu authored
This patch is to add ptp virtual clock driver framework utilizing timecounter/cyclecounter. The patch just exports two essential APIs for PTP driver. - ptp_vclock_register() - ptp_vclock_unregister() Signed-off-by:
-
David S. Miller authored
M Chetan Kumar says: ==================== net: wwan: iosm: fixes This patch series contains IOSM Driver fixes and details are are mentioned below. Patch1: Corrects uevent reporting format key=value pair. Patch2: Removes redundant IP session checks. Patch3: Correct link-Id number to be in sycn with MBIM session Id. Patch4: Update netdev tx stats. Patch5: Set netdev default mtu size. ==================== Signed-off-by: -
M Chetan Kumar authored
Set netdev default mtu size to 1500. Signed-off-by:
M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by:
-
M Chetan Kumar authored
Update tx stats on successful packet consume, drop. Signed-off-by:
-
M Chetan Kumar authored
Link ID to be kept intact with MBIM session ID Ex: ID 0 should be associated to MBIM session ID 0. Reported-by:
Loic Poulain <loic.poulain@linaro.org> Signed-off-by:
-
M Chetan Kumar authored
Remove reduandant IP session id check since required checks are in place under caller. Signed-off-by:
-
M Chetan Kumar authored
Change uevent env variable name to IOSM_EVENT & correct reporting format to key=value pair. Signed-off-by:
-
David S. Miller authored
Hariprasad Kelam says: ==================== DMAC based packet filtering Each MAC block supports 32 DMAC filters which can be configured to accept or drop packets based on address match This patch series adds mbox handlers and extends ntuple filter callbacks to accomdate DMAC filters such that user can install DMAC based filters on interface from ethtool. Patch1 adds necessary mbox handlers such that mbox consumers like PF netdev can add/delete/update DMAC filters and Patch2 adds debugfs support to dump current list of installed filters. Patch3 adds support to call mbox handlers upon receiving DMAC filters from ethtool ntuple commands. Change-log: v2 - - fixed indentation issues. v3 - - fixed kdoc warnings ==================== Signed-off-by: -
Hariprasad Kelam authored
DMAC filtering can be achieved by either NPC MCAM rules or CGX/RPM MAC filters. Currently we are achieving this by NPC MCAM rules. This patch offloads DMAC filters to CGX/RPM MAC filters instead of NPC MCAM rules. Offloading DMAC filter to CGX/RPM block helps in reducing traffic to NPC block and save MCAM rules Signed-off-by:
Hariprasad Kelam <hkelam@marvell.com> Signed-off-by:
Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by:
-
Hariprasad Kelam authored
Add debugfs support to display CGX/RPM DMAC filter table associated with pf. cat /sys/kernel/debug/octeontx2/cgx/cgx0/lmac0/mac_filter PCI dev RVUPF BROADCAST MULTICAST FILTER-MODE 0002:02:00.0 PF2 ACCEPT ACCEPT UNICAST DMAC-INDEX ADDRESS 0 00:0f:b7:06:17:06 1 1a:1b:1c:1d:1e:01 2 1a:1b:1c:1d:1e:02 Signed-off-by: -
Sunil Kumar Kori authored
MAC block supports 32 dmac filters which are logically divided among all attached LMACS. For example MAC block0 having one LMAC then maximum supported filters are 32 where as MAC block1 having 4 enabled LMACS them maximum supported filteres are 8 for each LMAC. This patch adds mbox handlers to add/delete/update mac entry in DMAC filter table. Signed-off-by:
Sunil Kumar Kori <skori@marvell.com> Signed-off-by:
-
David S. Miller authored
-
David S. Miller authored
Marek Behún says: ==================== dsa: mv88e6xxx: Topaz fixes here comes some fixes for the Topaz family (Marvell 88E6141 / 88E6341) which I found out about when I compared the Topaz' operations structure with that one of Peridot (6390). This is v2. In v1, I accidentally sent patches generated from wrong branch and the 5th patch does not contain a necessary change in serdes.c. Changes from v1: - the fifth patch, "enable SerDes RX stats for Topaz", needs another change in serdes.c - Andrew's Reviewed-by to 1,2,3,4 and 6 ==================== Signed-off-by: -
Marek Behún authored
Commit bf3504ce ("net: dsa: mv88e6xxx: Add 6390 family PCS registers to ethtool -d") added support for dumping SerDes PCS registers via ethtool -d for Peridot. The same implementation is also valid for Topaz, but was not enabled at the time. Signed-off-by:
Marek Behún <kabel@kernel.org> Fixes: bf3504ce ("net: dsa: mv88e6xxx: Add 6390 family PCS registers to ethtool -d") Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Marek Behún authored
Commit 0df95287 ("mv88e6xxx: Add serdes Rx statistics") added support for RX statistics on SerDes ports for Peridot. This same implementation is also valid for Topaz, but was not enabled at the time. We need to use the generic .serdes_get_lane() method instead of the Peridot specific one in the stats methods so that on Topaz the proper one is used. Signed-off-by:
-
Marek Behún authored
Commit 23e8b470 ("net: dsa: mv88e6xxx: Add devlink param for ATU hash algorithm.") introduced ATU hash algorithm access via devlink, but did not enable it for Topaz. Enable this feature also for Topaz. Signed-off-by:
-
Marek Behún authored
Commit 9e5baf9b ("net: dsa: mv88e6xxx: add RMU disable op") introduced .rmu_disable() method with implementation for several models, but forgot to add Topaz, which can use the Peridot implementation. Use the Peridot implementation of .rmu_disable() on Topaz. Signed-off-by:
-
Marek Behún authored
Commit 40cff8fc ("net: dsa: mv88e6xxx: Fix stats histogram mode") introduced wrong .stats_set_histogram() method for Topaz family. The Peridot method should be used instead. Signed-off-by:
-
Marek Behún authored
Commit f3a2cd32 ("net: dsa: mv88e6xxx: introduce .port_set_policy") introduced .port_set_policy() method with implementation for several models, but forgot to add Topaz, which can use the 6352 implementation. Use the 6352 implementation of .port_set_policy() on Topaz. Signed-off-by:
-
Xin Long authored
The doc draft-stewart-tsvwg-sctp-ipv4-00 that restricts 198 addresses was never published. These addresses as private addresses should be allowed to use in SCTP. As Michael Tuexen suggested, this patch is to move 198 addresses from unusable to private scope. Reported-by:
Sérgio <surkamp@gmail.com> Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Xin Long authored
As Marcelo's suggestion this will make code more clear to read. Signed-off-by:
-
Doug Berger authored
Setting the EXT_ENERGY_DET_MASK bit allows the port energy detection logic of the internal PHY to prevent the system from sleeping. Some internal PHYs will report that energy is detected when the network interface is closed which can prevent the system from going to sleep if WoL is enabled when the interface is brought down. Since the driver does not support waking the system on this logic, this commit clears the bit whenever the internal PHY is powered up and the other logic for manipulating the bit is removed since it serves no useful function. Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by:
Doug Berger <opendmb@gmail.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
The DSA core has a layered structure, and even though we end up returning 0 (success) to user space when setting a bonding/team upper that can't be offloaded, some parts of the framework actually need to know that we couldn't offload that. For example, if dsa_switch_lag_join returns 0 as it currently does, dsa_port_lag_join has no way to tell a successful offload from a software fallback, and it will call dsa_port_bridge_join afterwards. Then we'll think we're offloading the bridge master of the LAG, when in fact we're not even offloading the LAG. In turn, this will make us set skb->offload_fwd_mark = true, which is incorrect and the bridge doesn't like it. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
-
