This patch fixes the following warning:

=============================
WARNING: suspicious RCU usage
5.7.0-rc4-next-20200507-syzkaller #0 Not tainted
-----------------------------
net/ipv6/ip6mr.c:124 RCU-list traversed in non-reader section!!

ipmr_new_table() returns an existing table, but there is no table at
init. Therefore the condition: either holding rtnl or the list is empty
is used.

Fixes: d1db275d ("ipv6: ip6mr: support multiple tables")
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Fix sk_psock reference count leak on receive, from Xiyu Yang.

 2) CONFIG_HNS should be invisible, from Geert Uytterhoeven.

 3) Don't allow locking route MTUs in ipv6, RFCs actually forbid this,
    from Maciej Żenczykowski.

 4) ipv4 route redirect backoff wasn't actually enforced, from Paolo
    Abeni.

 5) Fix netprio cgroup v2 leak, from Zefan Li.

 6) Fix infinite loop on rmmod in conntrack, from Florian Westphal.

 7) Fix tcp SO_RCVLOWAT hangs, from Eric Dumazet.

 8) Various bpf probe handling fixes, from Daniel Borkmann.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (68 commits)
  selftests: mptcp: pm: rm the right tmp file
  dpaa2-eth: properly handle buffer size restrictions
  bpf: Restrict bpf_trace_printk()'s %s usage and add %pks, %pus specifier
  bpf: Add bpf_probe_read_{user, kernel}_str() to do_refine_retval_range
  bpf: Restrict bpf_probe_read{, str}() only to archs where they work
  MAINTAINERS: Mark networking drivers as Maintained.
  ipmr: Add lockdep expression to ipmr_for_each_table macro
  ipmr: Fix RCU list debugging warning
  drivers: net: hamradio: Fix suspicious RCU usage warning in bpqether.c
  net: phy: broadcom: fix BCM54XX_SHD_SCR3_TRDDAPD value for BCM54810
  tcp: fix error recovery in tcp_zerocopy_receive()
  MAINTAINERS: Add Jakub to networking drivers.
  MAINTAINERS: another add of Karsten Graul for S390 networking
  drivers: ipa: fix typos for ipa_smp2p structure doc
  pppoe: only process PADT targeted at local interfaces
  selftests/bpf: Enforce returning 0 for fentry/fexit programs
  bpf: Enforce returning 0 for fentry/fexit progs
  net: stmmac: fix num_por initialization
  security: Fix the default value of secid_to_secctx hook
  libbpf: Fix register naming in PT_REGS s390 macros
  ...

Pull rdma fixes from Jason Gunthorpe:
 "A few minor bug fixes for user visible defects, and one regression:

   - Various bugs from static checkers and syzkaller

   - Add missing error checking in mlx4

   - Prevent RTNL lock recursion in i40iw

   - Fix segfault in cxgb4 in peer abort cases

   - Fix a regression added in 5.7 where the IB_EVENT_DEVICE_FATAL could
     be lost, and wasn't delivered to all the FDs"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/uverbs: Move IB_EVENT_DEVICE_FATAL to destroy_uobj
  RDMA/uverbs: Do not discard the IB_EVENT_DEVICE_FATAL event
  RDMA/iw_cxgb4: Fix incorrect function parameters
  RDMA/core: Fix double put of resource
  IB/core: Fix potential NULL pointer dereference in pkey cache
  IB/hfi1: Fix another case where pq is left on waitlist
  IB/i40iw: Remove bogus call to netdev_master_upper_dev_get()
  IB/mlx4: Test return value of calls to ib_get_cached_pkey
  RDMA/rxe: Always return ERR_PTR from rxe_create_mmap_info()
  i40iw: Fix error handling in i40iw_manage_arp_cache()

Merge tag 'linux-kselftest-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:

 - lkdtm runner fixes to prevent dmesg clearing and shellcheck errors

 - ftrace test handling when test module doesn't exist

 - nsfs test fix to replace zero-length array with flexible-array

 - dmabuf-heaps test fix to return clear error value

* tag 'linux-kselftest-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/lkdtm: Use grep -E instead of egrep
  selftests/lkdtm: Don't clear dmesg when running tests
  selftests/ftrace: mark irqsoff_tracer.tc test as unresolved if the test module does not exist
  tools/testing: Replace zero-length array with flexible-array
  kselftests: dmabuf-heaps: Fix confused return value on expected error testing

Pull RISC-V fixes from Palmer Dabbelt:
 "A handful of build fixes, all found by Huawei's autobuilder.

  None of these patches should have any functional impact on kernels
  that build, and they're mostly related to various features
  intermingling with !MMU.

  While some of these might be better hoisted to generic code, it seems
  better to have the simple fixes in the meanwhile.

  As far as I know these are the only outstanding patches for 5.7"

* tag 'riscv-for-linus-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: mmiowb: Fix implicit declaration of function 'smp_processor_id'
  riscv: pgtable: Fix __kernel_map_pages build error if NOMMU
  riscv: Make SYS_SUPPORTS_HUGETLBFS depends on MMU
  riscv: Disable ARCH_HAS_DEBUG_VIRTUAL if NOMMU
  riscv: Add pgprot_writecombine/device and PAGE_SHARED defination if NOMMU
  riscv: stacktrace: Fix undefined reference to `walk_stackframe'
  riscv: Fix unmet direct dependencies built based on SOC_VIRT
  riscv: perf: RISCV_BASE_PMU should be independent
  riscv: perf_event: Make some funciton static

Pull arm64 fix from Catalin Marinas:
 "Fix flush_icache_range() second argument in machine_kexec() to be an
  address rather than size"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: fix the flush_icache_range arguments in machine_kexec

Alexei Starovoitov says:

====================
pull-request: bpf 2020-05-15

The following pull-request contains BPF updates for your *net* tree.

We've added 9 non-merge commits during the last 2 day(s) which contain
a total of 14 files changed, 137 insertions(+), 43 deletions(-).

The main changes are:

1) Fix secid_to_secctx LSM hook default value, from Anders.

2) Fix bug in mmap of bpf array, from Andrii.

3) Restrict bpf_probe_read to archs where they work, from Daniel.

4) Enforce returning 0 for fentry/fexit progs, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

"$err" is a variable pointing to a temp file. "$out" is not: only used
as a local variable in "check()" and representing the output of a
command line.

Fixes: eedbc685 (selftests: add PM netlink functional tests)
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Depending on the WRIOP version, the buffer size on the RX path must by a
multiple of 64 or 256. Handle this restriction properly by aligning down
the buffer size to the necessary value. Also, use the new buffer size
dynamically computed instead of the compile time one.

Fixes: 27c87486 ("dpaa2-eth: Use a single page per Rx buffer")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'hwmon-for-v5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - Fix ADC access synchronization problem with da9052 driver

 - Fix temperature limit and status reporting in nct7904 driver

 - Fix drivetemp temperature reporting if SCT is supported but SCT data
   tables are not.

* tag 'hwmon-for-v5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (da9052) Synchronize access with mfd
  hwmon: (nct7904) Fix incorrect range of temperature limit registers
  hwmon: (nct7904) Read all SMI status registers in probe function
  hwmon: (drivetemp) Fix SCT support if SCT data tables are not supported

Pull sound fixes from Takashi Iwai:
 "Things look good and calming down; the only change to ALSA core is the
  fix for racy rawmidi buffer accesses spotted by syzkaller, and the
  rest are all small device-specific quirks for HD-audio and USB-audio
  devices"

* tag 'sound-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek - Limit int mic boost for Thinkpad T530
  ALSA: hda/realtek - Add COEF workaround for ASUS ZenBook UX431DA
  ALSA: hda/realtek: Enable headset mic of ASUS UX581LV with ALC295
  ALSA: hda/realtek - Enable headset mic of ASUS UX550GE with ALC295
  ALSA: hda/realtek - Enable headset mic of ASUS GL503VM with ALC295
  ALSA: hda/realtek: Add quirk for Samsung Notebook
  ALSA: rawmidi: Fix racy buffer resize under concurrent accesses
  ALSA: usb-audio: add mapping for ASRock TRX40 Creator
  ALSA: hda/realtek - Fix S3 pop noise on Dell Wyse
  Revert "ALSA: hda/realtek: Fix pop noise on ALC225"
  ALSA: firewire-lib: fix 'function sizeof not defined' error of tracepoints format
  ALSA: usb-audio: Add control message quirk delay for Kingston HyperX headset

Pull drm fixes from Dave Airlie:
 "As mentioned last week an i915 PR came in late, but I left it, so the
  i915 bits of this cover 2 weeks, which is why it's likely a bit larger
  than usual.

  Otherwise it's mostly amdgpu fixes, one tegra fix, one meson fix.

  i915:
   - Handle idling during i915_gem_evict_something busy loops (Chris)
   - Mark current submissions with a weak-dependency (Chris)
   - Propagate error from completed fences (Chris)
   - Fixes on execlist to avoid GPU hang situation (Chris)
   - Fixes couple deadlocks (Chris)
   - Timeslice preemption fixes (Chris)
   - Fix Display Port interrupt handling on Tiger Lake (Imre)
   - Reduce debug noise around Frame Buffer Compression (Peter)
   - Fix logic around IPC W/a for Coffee Lake and Kaby Lake (Sultan)
   - Avoid dereferencing a dead context (Chris)

  tegra:
   - tegra120/4 smmu fixes

  amdgpu:
   - Clockgating fixes
   - Fix fbdev with scatter/gather display
   - S4 fix for navi
   - Soft recovery for gfx10
   - Freesync fixes
   - Atomic check cursor fix
   - Add a gfxoff quirk
   - MST fix

  amdkfd:
   - Fix GEM reference counting

  meson:
   - error code propogation fix"

* tag 'drm-fixes-2020-05-15' of git://anongit.freedesktop.org/drm/drm: (29 commits)
  drm/i915: Handle idling during i915_gem_evict_something busy loops
  drm/meson: pm resume add return errno branch
  drm/amd/amdgpu: Update update_config() logic
  drm/amd/amdgpu: add raven1 part to the gfxoff quirk list
  drm/i915: Mark concurrent submissions with a weak-dependency
  drm/i915: Propagate error from completed fences
  drm/i915/gvt: Fix kernel oops for 3-level ppgtt guest
  drm/i915/gvt: Init DPLL/DDI vreg for virtual display instead of inheritance.
  drm/amd/display: add basic atomic check for cursor plane
  drm/amd/display: Fix vblank and pageflip event handling for FreeSync
  drm/amdgpu: implement soft_recovery for gfx10
  drm/amdgpu: enable hibernate support on Navi1X
  drm/amdgpu: Use GEM obj reference for KFD BOs
  drm/amdgpu: force fbdev into vram
  drm/amd/powerplay: perform PG ungate prior to CG ungate
  drm/amdgpu: drop unnecessary cancel_delayed_work_sync on PG ungate
  drm/amdgpu: disable MGCG/MGLS also on gfx CG ungate
  drm/i915/execlists: Track inflight CCID
  drm/i915/execlists: Avoid reusing the same logical CCID
  drm/i915/gem: Remove object_is_locked assertion from unpin_from_display_plane
  ...

Daniel Borkmann says:

====================
Small set of fixes in order to restrict BPF helpers for tracing which are
broken on archs with overlapping address ranges as per discussion in [0].
I've targetted this for -bpf tree so they can be routed as fixes. Thanks!

v1 -> v2:
  - switch to reusable %pks, %pus format specifiers (Yonghong)
    - fixate %s on kernel_ds probing for archs with overlapping addr space

      [0] https://lore.kernel.org/bpf/CAHk-=wjJKo0GVixYLmqPn-Q22WFu0xHaBSjKEo7e7Yw72y5SPQ@mail.gmail.com/T/
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Usage of plain %s conversion specifier in bpf_trace_printk() suffers from the
very same issue as bpf_probe_read{,str}() helpers, that is, it is broken on
archs with overlapping address ranges.

While the helpers have been addressed through work in 6ae08ae3 ("bpf: Add
probe_read_{user, kernel} and probe_read_{user, kernel}_str helpers"), we need
an option for bpf_trace_printk() as well to fix it.

Similarly as with the helpers, force users to make an explicit choice by adding
%pks and %pus specifier to bpf_trace_printk() which will then pick the corresponding
strncpy_from_unsafe*() variant to perform the access under KERNEL_DS or USER_DS.
The %pk* (kernel specifier) and %pu* (user specifier) can later also be extended
for other objects aside strings that are probed and printed under tracing, and
reused out of other facilities like bpf_seq_printf() or BTF based type printing.

Existing behavior of %s for current users is still kept working for archs where it
is not broken and therefore gated through CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE.
For archs not having this property we fall-back to pick probing under KERNEL_DS as
a sensible default.

Fixes: 8d3b7dce ("bpf: add support for %s specifier to bpf_trace_printk()")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Link: https://lore.kernel.org/bpf/20200515101118.6508-4-daniel@iogearbox.net

Given bpf_probe_read{,str}() BPF helpers are now only available under
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE, we need to add the drop-in
replacements of bpf_probe_read_{kernel,user}_str() to do_refine_retval_range()
as well to avoid hitting the same issue as in 849fa506 ("bpf/verifier:
refine retval R0 state for bpf_get_stack helper").
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200515101118.6508-3-daniel@iogearbox.net

Given the legacy bpf_probe_read{,str}() BPF helpers are broken on archs
with overlapping address ranges, we should really take the next step to
disable them from BPF use there.

To generally fix the situation, we've recently added new helper variants
bpf_probe_read_{user,kernel}() and bpf_probe_read_{user,kernel}_str().
For details on them, see 6ae08ae3 ("bpf: Add probe_read_{user, kernel}
and probe_read_{user,kernel}_str helpers").

Given bpf_probe_read{,str}() have been around for ~5 years by now, there
are plenty of users at least on x86 still relying on them today, so we
cannot remove them entirely w/o breaking the BPF tracing ecosystem.

However, their use should be restricted to archs with non-overlapping
address ranges where they are working in their current form. Therefore,
move this behind a CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE and
have x86, arm64, arm select it (other archs supporting it can follow-up
on it as well).

For the remaining archs, they can workaround easily by relying on the
feature probe from bpftool which spills out defines that can be used out
of BPF C code to implement the drop-in replacement for old/new kernels
via: bpftool feature probe macro
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/bpf/20200515101118.6508-2-daniel@iogearbox.net

Just one meson patch this time to propagate an error code
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514073538.wvdtv5s2mt4wdrdj@gilmour.lan

Merge tag 'drm-intel-fixes-2020-05-13-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Handle idling during i915_gem_evict_something busy loops (Chris)
- Mark current submissions with a weak-dependency (Chris)
- Propagate errror from completed fences (Chris)
- Fixes on execlist to avoid GPU hang situation (Chris)
- Fixes couple deadlocks (Chris)
- Timeslice preemption fixes (Chris)
- Fix Display Port interrupt handling on Tiger Lake (Imre)
- Reduce debug noise around Frame Buffer Compression
+(Peter)
- Fix logic around IPC W/a for Coffee Lake and Kaby Lake
+(Sultan)
- Avoid dereferencing a dead context (Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514040235.GA2164266@intel.com

Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

During the initialization process, ipmr_new_table() is called
to create new tables which in turn calls ipmr_get_table() which
traverses net->ipv4.mr_tables without holding the writer lock.
However, this is safe to do so as no tables exist at this time.
Hence add a suitable lockdep expression to silence the following
false-positive warning:

=============================
WARNING: suspicious RCU usage
5.7.0-rc3-next-20200428-syzkaller #0 Not tainted
-----------------------------
net/ipv4/ipmr.c:136 RCU-list traversed in non-reader section!!

ipmr_get_table+0x130/0x160 net/ipv4/ipmr.c:136
ipmr_new_table net/ipv4/ipmr.c:403 [inline]
ipmr_rules_init net/ipv4/ipmr.c:248 [inline]
ipmr_net_init+0x133/0x430 net/ipv4/ipmr.c:3089

Fixes: f0ad0860 ("ipv4: ipmr: support multiple tables")
Reported-by: syzbot+1519f497f2f9f08183c6@syzkaller.appspotmail.com
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Amol Grover <frextrite@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipmr_for_each_table() macro uses list_for_each_entry_rcu()
for traversing outside of an RCU read side critical section
but under the protection of rtnl_mutex. Hence, add the
corresponding lockdep expression to silence the following
false-positive warning at boot:

[    4.319347] =============================
[    4.319349] WARNING: suspicious RCU usage
[    4.319351] 5.5.4-stable #17 Tainted: G            E
[    4.319352] -----------------------------
[    4.319354] net/ipv4/ipmr.c:1757 RCU-list traversed in non-reader section!!

Fixes: f0ad0860 ("ipv4: ipmr: support multiple tables")
Signed-off-by: Amol Grover <frextrite@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes the following warning:
=============================
WARNING: suspicious RCU usage
5.7.0-rc5-next-20200514-syzkaller #0 Not tainted
-----------------------------
drivers/net/hamradio/bpqether.c:149 RCU-list traversed in non-reader section!!

Since rtnl lock is held, pass this cond in list_for_each_entry_rcu().

Reported-by: syzbot+bb82cafc737c002d11ca@syzkaller.appspotmail.com
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Set the correct bit when checking for PHY_BRCM_DIS_TXCRXC_NOENRGY on the
BCM54810 PHY.

Fixes: 0ececcfc ("net: phy: broadcom: Allow BCM54810 to use bcm54xx_adjust_rxrefclk()")
Signed-off-by: Kevin Lo <kevlo@kevlo.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If user provides wrong virtual address in TCP_ZEROCOPY_RECEIVE
operation we want to return -EINVAL error.

But depending on zc->recv_skip_hint content, we might return
-EIO error if the socket has SOCK_DONE set.

Make sure to return -EINVAL in this case.

BUG: KMSAN: uninit-value in tcp_zerocopy_receive net/ipv4/tcp.c:1833 [inline]
BUG: KMSAN: uninit-value in do_tcp_getsockopt+0x4494/0x6320 net/ipv4/tcp.c:3685
CPU: 1 PID: 625 Comm: syz-executor.0 Not tainted 5.7.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x220 lib/dump_stack.c:118
 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121
 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
 tcp_zerocopy_receive net/ipv4/tcp.c:1833 [inline]
 do_tcp_getsockopt+0x4494/0x6320 net/ipv4/tcp.c:3685
 tcp_getsockopt+0xf8/0x1f0 net/ipv4/tcp.c:3728
 sock_common_getsockopt+0x13f/0x180 net/core/sock.c:3131
 __sys_getsockopt+0x533/0x7b0 net/socket.c:2177
 __do_sys_getsockopt net/socket.c:2192 [inline]
 __se_sys_getsockopt+0xe1/0x100 net/socket.c:2189
 __x64_sys_getsockopt+0x62/0x80 net/socket.c:2189
 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:297
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45c829
Code: 0d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f1deeb72c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000037
RAX: ffffffffffffffda RBX: 00000000004e01e0 RCX: 000000000045c829
RDX: 0000000000000023 RSI: 0000000000000006 RDI: 0000000000000009
RBP: 000000000078bf00 R08: 0000000020000200 R09: 0000000000000000
R10: 00000000200001c0 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000000001d8 R14: 00000000004d3038 R15: 00007f1deeb736d4

Local variable ----zc@do_tcp_getsockopt created at:
 do_tcp_getsockopt+0x1a74/0x6320 net/ipv4/tcp.c:3670
 do_tcp_getsockopt+0x1a74/0x6320 net/ipv4/tcp.c:3670

Fixes: 05255b82 ("tcp: add TCP_ZEROCOPY_RECEIVE support for zerocopy receive")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Fix a couple of quite severe issues for the CQE request path

  MMC host:
   - alcor: Fix a resource leak in the error path for ->probe()
   - sdhci-acpi: Fix the DMA support for the AMD eMMC v5.0 variant
   - sdhci-pci-gli: Fix system resume support for GL975x
   - sdhci-pci-gli: Fix reboot error for GL9750"

* tag 'mmc-v5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-acpi: Add SDHCI_QUIRK2_BROKEN_64_BIT_DMA for AMDI0040
  mmc: block: Fix request completion in the CQE timeout path
  mmc: core: Fix recursive locking issue in CQE recovery path
  mmc: core: Check request type before completing the request
  mmc: sdhci-pci-gli: Fix can not access GL9750 after reboot from Windows 10
  mmc: alcor: Fix a resource leak in the error path for ->probe()
  mmc: sdhci-pci-gli: Fix no irq handler from suspend

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Fix gcc-10 compilation warning in nf_conntrack, from Arnd Bergmann.

2) Add NF_FLOW_HW_PENDING to avoid races between stats and deletion
   commands, from Paul Blakey.

3) Remove WQ_MEM_RECLAIM from the offload workqueue, from Roi Dayan.

4) Infinite loop when removing nf_conntrack module, from Florian Westphal.

5) Set NF_FLOW_TEARDOWN bit on expiration to avoid races when refreshing
   the timeout from the software path.

6) Missing nft_set_elem_expired() check in the rbtree, from Phil Sutter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Complete adding of Karsten as maintainer for all S390 networking
parts in the kernel.

Cc: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove the duplicate "mutex", and change "Motex" to "Mutex". Also I
recommend it's easier for understanding to make the "ready-interrupt"
a bundle for it is a parallel description as "shutdown" which is appended
after the slash.
Signed-off-by: Wang Wenhu <wenhu.wang@vivo.com>
Cc: Alex Elder <elder@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

We don't want to disconnect a session because of a stray PADT arriving
while the interface is in promiscuous mode.
Furthermore, multicast and broadcast packets make no sense here, so
only PACKET_HOST is accepted.
Reported-by: David Balažic <xerces9@gmail.com>
Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are a few fentry/fexit programs returning non-0.
The tests with these programs will break with the previous
patch which enfoced return-0 rules. Fix them properly.

Fixes: ac065870 ("selftests/bpf: Add BPF_PROG, BPF_KPROBE, and BPF_KRETPROBE macros")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200514053207.1298479-1-yhs@fb.com

Currently, tracing/fentry and tracing/fexit prog
return values are not enforced. In trampoline codes,
the fentry/fexit prog return values are ignored.
Let us enforce it to be 0 to avoid confusion and
allows potential future extension.

This patch also explicitly added return value
checking for tracing/raw_tp, tracing/fmod_ret,
and freplace programs such that these program
return values can be anything. The purpose are
two folds:
 1. to make it explicit about return value expectations
    for these programs in verifier.
 2. for tracing prog_type, if a future attach type
    is added, the default is -ENOTSUPP which will
    enforce to specify return value ranges explicitly.

Fixes: fec56f58 ("bpf: Introduce BPF trampoline")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200514053206.1298415-1-yhs@fb.com

Driver missed initializing num_por which is one of the por values that
driver configures to hardware. In order to get these values, add a new
structure ethqos_emac_driver_data which holds por and num_por values
and populate that in driver probe.

Fixes: a7c30e62 ("net: stmmac: Add driver for Qualcomm ethqos")
Reported-by: Rahul Ankushrao Kawadgave <rahulak@qti.qualcomm.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

security_secid_to_secctx is called by the bpf_lsm hook and a successful
return value (i.e 0) implies that the parameter will be consumed by the
LSM framework. The current behaviour return success when the pointer
isn't initialized when CONFIG_BPF_LSM is enabled, with the default
return from kernel/bpf/bpf_lsm.c.

This is the internal error:

[ 1229.341488][ T2659] usercopy: Kernel memory exposure attempt detected from null address (offset 0, size 280)!
[ 1229.374977][ T2659] ------------[ cut here ]------------
[ 1229.376813][ T2659] kernel BUG at mm/usercopy.c:99!
[ 1229.378398][ T2659] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 1229.380348][ T2659] Modules linked in:
[ 1229.381654][ T2659] CPU: 0 PID: 2659 Comm: systemd-journal Tainted: G    B   W         5.7.0-rc5-next-20200511-00019-g864e0c6319b8-dirty #13
[ 1229.385429][ T2659] Hardware name: linux,dummy-virt (DT)
[ 1229.387143][ T2659] pstate: 80400005 (Nzcv daif +PAN -UAO BTYPE=--)
[ 1229.389165][ T2659] pc : usercopy_abort+0xc8/0xcc
[ 1229.390705][ T2659] lr : usercopy_abort+0xc8/0xcc
[ 1229.392225][ T2659] sp : ffff000064247450
[ 1229.393533][ T2659] x29: ffff000064247460 x28: 0000000000000000
[ 1229.395449][ T2659] x27: 0000000000000118 x26: 0000000000000000
[ 1229.397384][ T2659] x25: ffffa000127049e0 x24: ffffa000127049e0
[ 1229.399306][ T2659] x23: ffffa000127048e0 x22: ffffa000127048a0
[ 1229.401241][ T2659] x21: ffffa00012704b80 x20: ffffa000127049e0
[ 1229.403163][ T2659] x19: ffffa00012704820 x18: 0000000000000000
[ 1229.405094][ T2659] x17: 0000000000000000 x16: 0000000000000000
[ 1229.407008][ T2659] x15: 0000000000000000 x14: 003d090000000000
[ 1229.408942][ T2659] x13: ffff80000d5b25b2 x12: 1fffe0000d5b25b1
[ 1229.410859][ T2659] x11: 1fffe0000d5b25b1 x10: ffff80000d5b25b1
[ 1229.412791][ T2659] x9 : ffffa0001034bee0 x8 : ffff00006ad92d8f
[ 1229.414707][ T2659] x7 : 0000000000000000 x6 : ffffa00015eacb20
[ 1229.416642][ T2659] x5 : ffff0000693c8040 x4 : 0000000000000000
[ 1229.418558][ T2659] x3 : ffffa0001034befc x2 : d57a7483a01c6300
[ 1229.420610][ T2659] x1 : 0000000000000000 x0 : 0000000000000059
[ 1229.422526][ T2659] Call trace:
[ 1229.423631][ T2659]  usercopy_abort+0xc8/0xcc
[ 1229.425091][ T2659]  __check_object_size+0xdc/0x7d4
[ 1229.426729][ T2659]  put_cmsg+0xa30/0xa90
[ 1229.428132][ T2659]  unix_dgram_recvmsg+0x80c/0x930
[ 1229.429731][ T2659]  sock_recvmsg+0x9c/0xc0
[ 1229.431123][ T2659]  ____sys_recvmsg+0x1cc/0x5f8
[ 1229.432663][ T2659]  ___sys_recvmsg+0x100/0x160
[ 1229.434151][ T2659]  __sys_recvmsg+0x110/0x1a8
[ 1229.435623][ T2659]  __arm64_sys_recvmsg+0x58/0x70
[ 1229.437218][ T2659]  el0_svc_common.constprop.1+0x29c/0x340
[ 1229.438994][ T2659]  do_el0_svc+0xe8/0x108
[ 1229.440587][ T2659]  el0_svc+0x74/0x88
[ 1229.441917][ T2659]  el0_sync_handler+0xe4/0x8b4
[ 1229.443464][ T2659]  el0_sync+0x17c/0x180
[ 1229.444920][ T2659] Code: aa1703e2 aa1603e1 910a8260 97ecc860 (d4210000)
[ 1229.447070][ T2659] ---[ end trace 400497d91baeaf51 ]---
[ 1229.448791][ T2659] Kernel panic - not syncing: Fatal exception
[ 1229.450692][ T2659] Kernel Offset: disabled
[ 1229.452061][ T2659] CPU features: 0x240002,20002004
[ 1229.453647][ T2659] Memory Limit: none
[ 1229.455015][ T2659] ---[ end Kernel panic - not syncing: Fatal exception ]---

Rework the so the default return value is -EOPNOTSUPP.

There are likely other callbacks such as security_inode_getsecctx() that
may have the same problem, and that someone that understand the code
better needs to audit them.

Thank you Arnd for helping me figure out what went wrong.

Fixes: 98e828a0 ("security: Refactor declaration of LSM hooks")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/bpf/20200512174607.9630-1-anders.roxell@linaro.org

Fix register naming in PT_REGS s390 macros

Fixes: b8ebce86 ("libbpf: Provide CO-RE variants of PT_REGS macros")
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200513154414.29972-1-sumanthk@linux.ibm.com

mmap() subsystem allows user-space application to memory-map region with
initial page offset. This wasn't taken into account in initial implementation
of BPF array memory-mapping. This would result in wrong pages, not taking into
account requested page shift, being memory-mmaped into user-space. This patch
fixes this gap and adds a test for such scenario.

Fixes: fc970227 ("bpf: Add mmap() support for BPF_MAP_TYPE_ARRAY")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200512235925.3817805-1-andriin@fb.com

GCC 10 is very strict about symbol clash, and lwt_len_hist_user contains
a symbol which clashes with libbpf:

/usr/bin/ld: samples/bpf/lwt_len_hist_user.o:(.bss+0x0): multiple definition of `bpf_log_buf'; samples/bpf/bpf_load.o:(.bss+0x8c0): first defined here
collect2: error: ld returned 1 exit status

bpf_log_buf here seems to be a leftover, so removing it.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200511113234.80722-1-mcroce@redhat.com

Merge misc fixes from Andrew Morton:
 "7 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  kasan: add missing functions declarations to kasan.h
  kasan: consistently disable debugging features
  ipc/util.c: sysvipc_find_ipc() incorrectly updates position index
  userfaultfd: fix remap event with MREMAP_DONTUNMAP
  mm/gup: fix fixup_user_fault() on multiple retries
  epoll: call final ep_events_available() check under the lock
  mm, memcg: fix inconsistent oom event behavior

Pull thread fix from Christian Brauner:
 "This contains a single fix for all exported legacy fork helpers to
  block accidental access to clone3() features in the upper 32 bits of
  their respective flags arguments.

  I got Cced on a glibc issue where someone reported consistent failures
  for the legacy clone() syscall on ppc64le when sign extension was
  performed (since the clone() syscall in glibc exposes the flags
  argument as an int whereas the kernel uses unsigned long).

  The legacy clone() syscall is odd in a bunch of ways and here two
  things interact:

   - First, legacy clone's flag argument is word-size dependent, i.e.
     it's an unsigned long whereas most system calls with flag arguments
     use int or unsigned int.

   - Second, legacy clone() ignores unknown and deprecated flags.

  The two of them taken together means that users on 64bit systems can
  pass garbage for the upper 32bit of the clone() syscall since forever
  and things would just work fine.

  The following program compiled on a 64bit kernel prior to v5.7-rc1
  will succeed and will fail post v5.7-rc1 with EBADF:

    int main(int argc, char *argv[])
    {
          pid_t pid;

          /* Note that legacy clone() has different argument ordering on
           * different architectures so this won't work everywhere.
           *
           * Only set the upper 32 bits.
           */
          pid = syscall(__NR_clone, 0xffffffff00000000 | SIGCHLD,
                        NULL, NULL, NULL, NULL);
          if (pid < 0)
                  exit(EXIT_FAILURE);
          if (pid == 0)
                  exit(EXIT_SUCCESS);
          if (wait(NULL) != pid)
                  exit(EXIT_FAILURE);

          exit(EXIT_SUCCESS);
    }

  Since legacy clone() couldn't be extended this was not a problem so
  far and nobody really noticed or cared since nothing in the kernel
  ever bothered to look at the upper 32 bits.

  But once we introduced clone3() and expanded the flag argument in
  struct clone_args to 64 bit we opened this can of worms. With the
  first flag-based extension to clone3() making use of the upper 32 bits
  of the flag argument we've effectively made it possible for the legacy
  clone() syscall to reach clone3() only flags on accident. The sign
  extension scenario is just the odd corner-case that we needed to
  figure this out.

  The reason we just realized this now and not already when we
  introduced CLONE_CLEAR_SIGHAND was that CLONE_INTO_CGROUP assumes that
  a valid cgroup file descriptor has been given - whereas
  CLONE_CLEAR_SIGHAND doesn't need to verify anything. It just silently
  resets the signal handlers to SIG_DFL.

  So the sign extension (or the user accidently passing garbage for the
  upper 32 bits) caused the CLONE_INTO_CGROUP bit to be raised and the
  kernel to error out when it didn't find a valid cgroup file
  descriptor.

  Note, I'm also capping kernel_thread()'s flag argument mainly because
  none of the new features make sense for kernel_thread() and we
  shouldn't risk them being accidently activated however unlikely. If we
  wanted to, we could even make kernel_thread() yell when an unknown
  flag has been set which it doesn't do right now. But it's not worth
  risking this in a bugfix imho"

* tag 'for-linus-2020-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  fork: prevent accidental access to clone3 features

Pull more tracing fixes from Steven Rostedt:
 "Various tracing fixes:

   - Fix a crash when having function tracing and function stack tracing
     on the command line.

     The ftrace trampolines are created as executable and read only. But
     the stack tracer tries to modify them with text_poke() which
     expects all kernel text to still be writable at boot. Keep the
     trampolines writable at boot, and convert them to read-only with
     the rest of the kernel.

   - A selftest was triggering in the ring buffer iterator code, that is
     no longer valid with the update of keeping the ring buffer writable
     while a iterator is reading.

     Just bail after three failed attempts to get an event and remove
     the warning and disabling of the ring buffer.

   - While modifying the ring buffer code, decided to remove all the
     unnecessary BUG() calls"

* tag 'trace-v5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ring-buffer: Remove all BUG() calls
  ring-buffer: Don't deactivate the ring buffer on failed iterator reads
  x86/ftrace: Have ftrace trampolines turn read-only at the end of system boot up