- 20 Oct, 2016 2 commits
-
-
Stefan Agner authored
There is no need to explicitly initiate a register transfer and turn off the DCU after initializing the plane registers. In fact, this is harmful and leads to unnecessary flickers if the DCU has been left on by the bootloader. Signed-off-by:
Stefan Agner <stefan@agner.ch> Tested-By:
Meng Yi <meng.yi@nxp.com>
-
Stefan Agner authored
Do not use encoder disable/enable callbacks to control bypass mode as this seems to mess with the signals not liked by displays. This also makes more sense since the encoder is already defined to be parallel RGB/LVDS at creation time. Signed-off-by:
-
- 17 Oct, 2016 1 commit
-
-
Daniel Vetter authored
I was a bit over-eager in my cleanup in commit 95c081c1 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Jun 21 10:54:12 2016 +0200 drm: Move master pointer from drm_minor to drm_device Noticed by Chris Wilson. Fixes: 95c081c1 ("drm: Move master pointer from drm_minor to drm_device") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Tested-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
- 16 Oct, 2016 1 commit
-
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Fixes for radeon and amdgpu for 4.9: - allow an additional reg in the SI reg checker - fix thermal sensor readback on CZ/ST - misc bug fixes * 'drm-next-4.9' of git://people.freedesktop.org/~agd5f/linux: (21 commits) drm/amd/powerplay: fix bug stop dpm can't work on Vi. drm/amd/powerplay: notify smu no display by default. drm/amdgpu/dpm: implement thermal sensor for CZ/ST drm/amdgpu/powerplay: implement thermal sensor for CZ/ST drm/amdgpu: disable smu hw first on tear down drm/amdgpu: fix amdgpu_need_full_reset (v2) drm/amdgpu/si_dpm: Limit clocks on HD86xx part drm/amd/powerplay: fix static checker warnings in smu7_hwmgr.c drm/amdgpu: potential NULL dereference in debugfs code drm/amd/powerplay: fix static checker warnings in smu7_hwmgr.c drm/amd/powerplay: fix static checker warnings in iceland_smc.c drm/radeon: change vblank_time's calculation method to reduce computational error. drm/amdgpu: change vblank_time's calculation method to reduce computational error. drm/amdgpu: clarify UVD/VCE special handling for CG drm/amd/amdgpu: enable clockgating only after late init drm/radeon: allow TA_CS_BC_BASE_ADDR on SI drm/amdgpu: initialize the context reset_counter in amdgpu_ctx_init drm/amdgpu/gfx8: fix CGCG_CGLS handling drm/radeon: fix modeset tear down code drm/radeon: fix up dp aux tear down (v2) ...
-
- 14 Oct, 2016 6 commits
-
-
Rex Zhu authored
Signed-off-by:
Rex Zhu <Rex.Zhu@amd.com> Reviewed-by:
-
Rex Zhu authored
Signed-off-by:
-
Alex Deucher authored
Previous code was just a copy/paste from KV. Reviewed-by:
Tom St Denis <tom.stdenis@amd.com> Signed-off-by:
-
Alex Deucher authored
Add missing functionality. Reviewed-by:
-
Alex Deucher authored
Otherwise, you can't disable dpm. Tested-by and Reviewed-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: -
Alex Deucher authored
IP types are not an index. Each asic may have number and type of IPs. Properly check the the type rather than using the type id as an index. v2: fix all the IPs to not use IP type as an idx as well. Reviewed-by:
Chunming Zhou <david1.zhou@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
- 13 Oct, 2016 7 commits
-
-
Tom St Denis authored
Limit clocks on a specific HD86xx part to avoid crashes (while awaiting an appropriate PP fix). Signed-off-by:
-
Rex Zhu authored
Signed-off-by:
-
Dan Carpenter authored
debugfs_create_file() returns NULL on error, it only returns error pointers if debugfs isn't enabled in the config and we checked for that earlier so it can't happen. Fixes: 4f4824b5 ('drm/amd/amdgpu: Convert ring debugfs entries to binary') Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Rex Zhu authored
variable dereferenced before check it Signed-off-by:
-
Rex Zhu authored
add array length check to avoid buffer overflow. Signed-off-by:
-
Alex Deucher authored
Ported from Rex's amdgpu change. Signed-off-by: -
Rex Zhu authored
Signed-off-by:
-
- 12 Oct, 2016 8 commits
-
-
Alex Deucher authored
UVD and VCE CG are handled specially, however the previous fix for this skipped late init for those blocks rather than just CG. Just protect the CG function call. No functional change since UVD and VCE don't currently utilize a late_init function. Reviewed-by:
-
Arindam Nath authored
Sometimes during multiple reboots, the system hangs during bootup. The issue is very random and happens once in around 50 reboots or so. It seems if clockgating is enabled before late init, the GFX engine sometimes does not respond. This patch changes the ordering a little so that both powergating and clockgating are enabled only after late init calls. Reviewed-by:
Arindam Nath <arindam.nath@amd.com> Tested-by:
Sunil Uttarwar <Sunil.Uttarwar1@amd.com> Reviewed-by:
-
Marek Olšák authored
Required for border colors in compute shaders. Reviewed-by:
Edward O'Callaghan <funfunctor@folklore1984.net> Reviewed-by:
Marek Olšák <marek.olsak@amd.com> Signed-off-by:
-
Nicolai Hähnle authored
Ensure that we really only report a GPU reset if one has happened since the creation of the context. Signed-off-by:
Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by:
-
Alex Deucher authored
When setting up the RLC, only disable the CGCG and CGLS bits rather than clearing the entire register to avoid losing the golden settings. Signed-off-by: -
Alex Deucher authored
The ordering caused problems. bug: https://bugs.freedesktop.org/show_bug.cgi?id=98200Reviewed-and-Tested-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Alex Deucher authored
Port the amdgpu fixes from Grazvydas to radeon. v2: drop unrelated whitespace change. bug: https://bugs.freedesktop.org/show_bug.cgi?id=98200Reviewed-and-Tested-by:
-
Grazvydas Ignotas authored
When DisplayPort AUX channel i2c adapter is registered, drm_connector's kdev member is used as a parent, so we get sysfs structure like: /drm/card1/card1-DP-2/i2c-12 Because of that, there is a problem when drm core (and not the driver) calls drm_connector_unregister(), it removes parent sysfs entries ('card1-DP-2' in our example) while the i2c adapter is still registered. Later we get a WARN when we try to unregister the i2c adapter: WARNING: CPU: 3 PID: 1374 at fs/sysfs/group.c:243 sysfs_remove_group+0x14c/0x150 sysfs group ffffffff82911e40 not found for kobject 'i2c-12' To fix it, we can use the .early_unregister hook to unregister the i2c adapter before drm_connector's sysfs is torn down. Signed-off-by:Grazvydas Ignotas <notasas@gmail.com> Signed-off-by:
-
- 11 Oct, 2016 2 commits
-
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
Just flushing out my -misc queue. Slightly important are the prime refcount/unload fixes from Chris. There's also the reservation stuff from Chris still pending, and Sumits hasn't landed that yet. Might get another pull for that, but pls don't hold up the main pull for it ;-) * tag 'topic/drm-misc-2016-10-11' of git://anongit.freedesktop.org/drm-intel: drm/crtc: constify drm_crtc_index parameter drm: use the right function name in documentation drm: Release resources with a safer function drm: Fix up kerneldoc for new drm_gem_dmabuf_export() drm/bridge: Drop drm_connector_unregister and call drm_connector_cleanup directly drm/fb-helper: fix sphinx markup for DRM_FB_HELPER_DEFAULT_OPS drm/bridge: Add RGB to VGA bridge support drm/prime: Take a ref on the drm_dev when exporting a dma_buf drm/prime: Pass the right module owner through to dma_buf_export() drm/bridge: Call drm_connector_cleanup directly drm: simple_kms_helper: Add prepare_fb and cleanup_fb hooks drm: Release resources with a safer function
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2016-10-11' of git://anongit.freedesktop.org/drm-intel into drm-next A big bunch of i915 fixes for drm-next / v4.9 merge window, with more than half of them also cc: stable. We also continue to have more Fixes: annotations for our fixes, which should help the backporters and archeologists. * tag 'drm-intel-next-fixes-2016-10-11' of git://anongit.freedesktop.org/drm-intel: (27 commits) drm/i915: Fix conflict resolution from backmerge of v4.8-rc8 to drm-next drm/i915/guc: Unwind GuC workqueue reservation if request construction fails drm/i915: Reset the breadcrumbs IRQ more carefully drm/i915: Force relocations via cpu if we run out of idle aperture drm/i915: Distinguish last emitted request from last submitted request drm/i915: Allow DP to work w/o EDID drm/i915: Move long hpd handling into the hotplug work drm/i915/execlists: Reinitialise context image after GPU hang drm/i915: Use correct index for backtracking HUNG semaphores drm/i915: Unalias obj->phys_handle and obj->userptr drm/i915: Just clear the mmiodebug before a register access drm/i915/gen9: only add the planes actually affected by ddb changes drm/i915: Allow PCH DPLL sharing regardless of DPLL_SDVO_HIGH_SPEED drm/i915/bxt: Fix HDMI DPLL configuration drm/i915/gen9: fix the watermark res_blocks value drm/i915/gen9: fix plane_blocks_per_line on watermarks calculations drm/i915/gen9: minimum scanlines for Y tile is not always 4 drm/i915/gen9: fix the WaWmMemoryReadLatency implementation drm/i915/kbl: KBL also needs to run the SAGV code drm/i915: introduce intel_has_sagv() ...
-
- 10 Oct, 2016 13 commits
-
-
Jani Nikula authored
Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1476113170-13816-1-git-send-email-jani.nikula@intel.com
-
Chris Wilson authored
The conflict resolution of v4.8-rc8 backmerge to drm-next pulled back in a few lines of dead code due to the code movement around i915_gem_reset(), fix that up. Fixes: ca09fb9f ("Merge tag 'v4.8-rc8' into drm-next") Signed-off-by:
-
Chris Wilson authored
We reserve space in the GuC workqueue for submitting the request in the future. However, if we fail to construct the request, we need to give that reserved space back to the system. Fixes: dadd481b ("drm/i915/guc: Prepare for nonblocking execbuf submission") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97978Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161007065327.24515-4-chris@chris-wilson.co.uk (cherry picked from commit 5ba89908) Signed-off-by:
-
Chris Wilson authored
Along with the interrupt, we want to restore the fake-irq and wait-timeout detection. If we use the breadcrumbs interface to setup the interrupt as it wants, the auxiliary timers will also be restored. v2: Cancel both timers as well, sanitize the IMR. Fixes: 821ed7df ("drm/i915: Update reset path to fix incomplete requests") Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161007065327.24515-3-chris@chris-wilson.co.uk (cherry picked from commit ad07dfcd) Signed-off-by:
-
Chris Wilson authored
If we run out of enough aperture space to fit the entire object, we fallback to trying to insert a single page. However, if that also fails, we currently fail to userspace with an unexpected ENOSPC. (ENOSPC means to userspace that their batch could not be fitted within the GTT.) Prior to commit e8cb909a ("drm/i915: Fallback to single page GTT mmappings for relocations") the approach is to fallback to using the slow CPU relocation path in case of iomapping failure, and that is the behaviour we need to restore. Fixes: e8cb909a ("drm/i915: Fallback to single page GTT mmappings...") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98101Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161007065327.24515-2-chris@chris-wilson.co.uk (cherry picked from commit d7f76335) Signed-off-by:
-
Chris Wilson authored
In order not to trigger hangcheck on a idle-but-waiting engine, we need to distinguish between the pending request queue and the actual execution queue. This is done later in "drm/i915: Enable multiple timelines" but for now we need a temporary fix to prevent blaming the wrong engine for a GPU hang. (Note that this causes a temporary subtle change in how we decide when to allow a waitboost to be re-awarded back to the waiter, the temporary effect is that if the wait is upon the most current execution the wait is given for free, instead of checking to see if the client stalled itself. This will be repaired in "drm/i915: Enable multiple timelines".) Fixes: 0a046a0e ("drm/i915: Nonblocking request submission") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98104Signed-off-by:
-
Ville Syrjälä authored
Allow returning "connected" or "unknown" connector status for DP branch devices that don't have an EDID. Currently we'd claim the thing as "disconnected" if there is no EDID. This stuff used to broken already, I think, but it got more broken by commit f21a2198 ("drm/i915: Splitting intel_dp_detect") Cc: Damien Cassou <damien@cassou.me> Cc: freedesktop.org@gp.mailgun.org Cc: Arno <blouin.arno@gmail.com> Cc: Shubhangi Shrivastava <shubhangi.shrivastava@intel.com> Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Cc: stable@vger.kernel.org Tested-by:
Arno <blouin.arno@gmail.com> Fixes: f21a2198 ("drm/i915: Splitting intel_dp_detect") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83348Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1475481316-8194-2-git-send-email-ville.syrjala@linux.intel.comReviewed-by:
Ander Conselvan de Oliveira <conselvan2@gmail.com> (cherry picked from commit 5cb651a7) Signed-off-by:
-
Ville Syrjälä authored
We can't rely on connector->status in the detect() hook if the long hpd was already handled by the dig_port_work as that won't update connector->status. Thus we have to defer the long hpd handling entirely until the hotplug work runs to avoid the double long hpd handling the "detect_done" flag is trying to prevent. We'll start to depend on connector->status being up to date in a following patch. Cc: Damien Cassou <damien@cassou.me> Cc: freedesktop.org@gp.mailgun.org Cc: Arno <blouin.arno@gmail.com> Cc: Shubhangi Shrivastava <shubhangi.shrivastava@intel.com> Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Cc: stable@vger.kernel.org Tested-by:
-
Chris Wilson authored
On Braswell, at least, we observe that the context image is written in multiple phases. The first phase is to clear the register state, and subsequently rewrite it. A GPU reset at the right moment can interrupt the context update leaving it corrupt, and our update of the RING_HEAD is not sufficient to restart the engine afterwards. To recover, we need to reset the registers back to their original values. The context state is lost. What we need is a better mechanism to serialise the reset with pending flushes from the GPU. Fixes: 821ed7df ("drm/i915: Update reset path to fix incomplete requests") Signed-off-by:
-
Chris Wilson authored
When decoding the semaphores inside hangcheck, we need to use the hw-id and not the local array index. Fixes: de1add36 ("drm/i915: Decouple execbuf uAPI ...") Testcase: igt/gem_exec_whisper/hang # gen6-7 Signed-off-by:
-
Chris Wilson authored
We use obj->phys_handle to choose the pread/pwrite path, but as obj->phys_handle is a union with obj->userptr, we then mistakenly use the phys_handle path for userptr objects within pread/pwrite. Testcase: igt/gem_userptr_blits/forbidden-operations Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97519Signed-off-by:
-
Chris Wilson authored
When we enable the per-register access mmiodebug, it is to detect which access is illegal. Reporting on earlier untraced access outside of the mmiodebug does not help debugging (as the suspicion is immediately put upon the current register which is not at fault)! References: https://bugs.freedesktop.org/show_bug.cgi?id=97985Signed-off-by:
-
Paulo Zanoni authored
We were previously adding all the planes owned by the CRTC even when the ddb partitioning didn't change for them. As a consequence, a lot of functions were being called when we were just moving the cursor around the screen, such as skylake_update_primary_plane(). This was causing flickering on the primary plane when moving the cursor. I'm not 100% sure which operation caused the flickering, but we were writing to a lot of registers, so it could be any of these writes. With this patch, just moving the mouse won't add the primary plane to the commit since it won't trigger a change in DDB partitioning. v2: Use skl_ddb_entry_equal() (Lyude). v3: Change Reported-and-bisected-by: to Reported-by: for checkpatch Fixes: 05a76d3d ("drm/i915/skl: Ensure pipes with changed wms get added to the state") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97888 Cc: Mike Lothian <mike@fireburn.co.uk> Cc: stable@vger.kernel.org Reported-by:
Mike Lothian <mike@fireburn.co.uk> Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
Lyude <cpaul@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/1475177808-29955-1-git-send-email-paulo.r.zanoni@intel.com (cherry picked from commit 7f60e200) Signed-off-by:
-
