- 23 Jan, 2008 12 commits
-
-
Salyzyn, Mark authored
In experiments in the lab we managed to trigger an Adapter firmware panic (BlinkLED) coincidentally while several pass-through ioctl command from the management software were outstanding on a bug only present on a class of RAID Adapters that require a hardware reset rather than a commanded reset. The net result was an attempt to time out the management software command as if it came from the SCSI layer resulting in an OS panic. Adapters that use commanded reset, management commands are returned failed by the Adapter correctly. The adapter firmware panic that resulted in this condition was also resolved, and there were no adapters in the field with this specific firmware bug so we do not expect any field reports. This is a rare or unlikely corner condition, and no reports have ever been forwarded from the field. Signed-off-by:
Mark Salyzyn <aacraid@adaptec.com> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
Salyzyn, Mark authored
The 'entry' automatic variable was defined at the top and within a block that uses it, removed the definition from the block that uses it. Some cosmetic changes were made while in the same file. This patch should be inert. Signed-off-by:
-
Salyzyn, Mark authored
Big endian systems issues discovered in the aacraid driver. Somewhat reverses a patch from November 7th of last year that removed swap operations because they formerly were being assigned to an u8 array when they should have been assigned to an le32 array. This patch is largely inert for any little endian processor architecture. It resolves a bug in delivering the BlinkLED AIF event to registered applications when the adapter or associated hardware was reset due to ill health. A rare corner case occurrence, also largely unnoticed by any as it was a new (untested!) feature. Signed-off-by:
-
Salyzyn, Mark authored
The parameter 'info' is reused, renamed the second to sinfo to represent supplemental adapter info, to suppress compile warning message. Signed-off-by:
-
Salyzyn, Mark authored
Report the RAID level string for the SCSI device representing the array. Report is in /sys/class/scsi_device/#:#:#:#/device/level. Signed-off-by:
-
Salyzyn, Mark authored
aacraid.cache parameter, Disable Queue Flush commands: bit 0 - Disable FUA in WRITE SCSI commands bit 1 - Disable SYNCHRONIZE_CACHE SCSI command bit 2 - Disable only if Battery not protecting adapter supplied Cache e.g.: aacraid.cache=7 will disable the FUA and SYNCHRONIZE_CACHE commands if the adapter has reported that it's cache is battery backed up. This parameter permits experimentation with tradeoffs between performance and caching policy. Signed-off-by: -
James Bottomley authored
This conversion makes full use of the is_visible() callback on attribute groups. Now, each device appears only with its capability flags in the transport class directory. Previously each device appeared with the capability of the host, so this is a functionality improvement. Converting to attribute groups allows us to sweep away most of the home grown #defines that were effectively doing the same thing. Signed-off-by: -
James Bottomley authored
This patch allows the various users of attribute_groups to selectively allow the appearance of group attributes. The primary consumer of this will be the transport classes in which we currently have elaborate attribute selection algorithms to do this same thing. Acked-by:
Greg KH <greg@kroah.com> Signed-off-by:
-
James Bottomley authored
While trying to convert the SPI transport class to attribute groups, I discovered that we don't actually have any transport configure points for either the target or the host. This patch adds these missing transport class triggers. The host one is simply done after the add, the target one tries to be more clever and add it after devices may have been placed on the target (so the device configure will have set up the target parameters). Signed-off-by: -
James Bottomley authored
This patch is the beginning of moving the attribute_containers to use attribute groups exclusively. The attr element is now deprecated and will eventually be removed (along with all the hand rolled code for doing exactly what attribute groups do) when all the consumers are converted to attribute groups. Acked-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
James Bottomley authored
I can't see a reason why these shouldn't work on every group. However, they only seem to work on named groups. This patch allows the group functions to work on anonymous groups (those with NULL names). Acked-by:
Tejun Heo <htejun@gmail.com> Acked-by:
Kay Sievers <kay.sievers@vrfy.org> Acked-by:
-
James Bottomley authored
Hugh Dickens noticed that SMART commands issued from user space can end up corupting memory. The problem occurs if the buffer used to read data spans two pages. The reason is that the PIO sector routines in libata are expecting physically contiguous pages when they do sector operations, so the left overs on the second page go into the next physically adjacent page rather than the next page in the sg mapping. Fix this by enforcing strict 512 byte alignment on all buffers from userspace. Acked-by:
Hugh Dickins <hugh@veritas.com> Acked-by:
Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
- 12 Jan, 2008 28 commits
-
-
James Bottomley authored
This patch relaxes the default SCSI DMA alignment from 512 bytes to 4 bytes. I remember from previous discussions that usb and firewire have sector size alignment requirements, so I upped their alignments in the respective slave allocs. The reason for doing this is so that we don't get such a huge amount of copy overhead in bio_copy_user() for udev. (basically all inquiries it issues can now be directly mapped). Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
James Bottomley authored
The purpose of this is to allow stacked alignment settings, with the ultimate queue alignment being set to the largest alignment requirement in the stack. The reason for this is so that the SCSI mid-layer can relax the default alignment requirements (which are basically causing a lot of superfluous copying to go on in the SG_IO interface) while allowing transports, devices or HBAs to add stricter limits if they need them. Acked-by:
Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
FUJITA Tomonori authored
Looks like that host_cmd_pool_mutex are necessary here. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
-
James Bottomley authored
Based on an original patch from: David Martin <tasio@tasio.net> When trying to get the drive status via ioctl CDROM_DRIVE_STATUS, with no disk it gives CDS_TRAY_OPEN even if the tray is closed. ioctl works as expected with ide-cd driver. Gentoo bug report: http://bugs.gentoo.org/show_bug.cgi?id=196879 Cc: Maarten Bressers <mbres@gentoo.org> Signed-off-by:
-
James Bottomley authored
This is bad for two reasons: 1. If they're returned to outside applications, no-one knows what they mean. 2. Eventually they'll clash with the ever expanding standard error codes. The problem error code in question is ETASK. I've replaced this by ECOMM (communications error on send) a network error code that seems to most closely relay what ETASK meant. Acked-by:Darrick J. Wong <djwong@us.ibm.com> Signed-off-by:
-
James Bottomley authored
Currently in BSG, errors returned in req->errors aren't passed back to the calling programme (either via SG_IO or via read/write). Fix this, while preserving the SCSI convention of returning status in req->errors. Now update libsas to return errors correctly instead of to ignore them. Acked-by:
-
James Bottomley authored
All SMP tasks sent through bsg generate messages like: sas: smp_execute_task: task to dev 500605b000001450 response: 0x0 status 0x81 Three times (because the task gets retried). Firstly, don't retry either overrun or underrun (the data buffer isn't going to change size) and secondly, just report the underrun but don't set an error for it. This is necessary so bsg can report back the residual. Signed-off-by: -
James Bottomley authored
This adds support for host side SMP processing, via a separate SMP interpreter file. Signed-off-by: -
FUJITA Tomonori authored
This patch fixes mptsas_smp_handler to update both din_resid or dout_resid on success. bsg can report back the residual. Signed-off-by:
-
Christof Schmitt authored
We need to hold the queue-lock when checking whether we still have a valid unit/port handle for the task management command, i.e whether we can issue this request for this unit/port. If the error recovery is about to close this unit/port, then it competes for the queue-lock. If the close request issued by the error recovery wins, then it is guaranteed that this unit/port has been blocked for other requests. Signed-off-by:
Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by:
Martin Peschke <mp3@de.ibm.com> Signed-off-by:
-
Christof Schmitt authored
We need to hold the queue-lock when checking whether we still have a valid unit/port handle for the FCP command, i.e whether we can issue this request for this unit/port. If the error recovery is about to close this unit/port, then it competes for the queue-lock. If the close request issued by the error recovery wins, then it is guaranteed that this unit/port has been blocked for other requests. Signed-off-by:
-
Christof Schmitt authored
We need to hold the queue-lock when checking whether we still have a valid port handle for the ELS command, i.e whether we can issue this request for this port. If the error recovery is about to close this port, then it competes for the queue-lock. If the close request issued by the error recovery wins, then it is guaranteed that this port has been blocked for other requests. Signed-off-by:
-
Christof Schmitt authored
We need to hold the queue-lock when checking whether we still have a valid unit/port handle for the abort command, i.e whether we can issue this request for this unit/port. If the error recovery is about to close this unit/port, then it competes for the queue-lock. If the close request issued by the error recovery wins, then it is guaranteed that this unit/port has been blocked for other requests. Signed-off-by:
-
Christof Schmitt authored
According to the FSF spec, word 0 (bytes 0-3) has the handle specified with the abort command and word 1 (bytes 4-7) has the handle for the command to be aborted. Fix the if statements that try to compare those. Signed-off-by:
-
Heiko Carstens authored
zfcp_erp_strategy_check_fsfreq() checks if it is safe to access the fsf_req associated with the erp_action that gets passed. To test if it is safe it accesses the fsf_req in order to get its index into the hash list. This is broken since the fsf_req might be freed already and the read index has no meaning. It could lead to memory corruption. Fix this by introducing a new zfcp_reqlist_find_safe() method which just checks if addresses are equal. This is slower, but only gets called in case of error recovery. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Adrian Bunk authored
megaraid_remove_one() can become __devexit. Signed-off-by:
Adrian Bunk <bunk@kernel.org> Acked-by:
"Patro, Sumant" <Sumant.Patro@lsi.com> Signed-off-by:
-
Roel Kluin authored
SR_REQ is defined 0x20, but bitanding has no effect because '!' has a higher priority than '&' Signed-off-by:
Roel Kluin <12o3l@tiscali.nl> Signed-off-by:
-
Swen Schillig authored
we are planning a major rewrite of the zfcp driver, meaning that a lot of patches will hit the mailing-list in the near future. Since I can't support this additional work-load along with my other responsibilities we are shifting the maintainership to Christof Schmitt as the maintainer and Martin Peschke as the co-maintainer. Please support the two in providing us a new and more stable zfcp environment. Thanks Swen Signed-off-by: -
Mike Christie authored
Update version. Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Mike Christie authored
If we negotiate for X r2ts we have to use only X r2ts. We cannot round up (we could send less though). It is ok to fail if it is not something the driver can handle, so this patch just does that. Signed-off-by:
-
vignesh babu authored
Replacing n & (n - 1) for power of 2 check by is_power_of_2(n) Signed-off-by:
vignesh babu <vignesh.babu@wipro.com> Signed-off-by:
-
Mike Christie authored
iscsi_data_rsp needs to hold the sesison lock when it calls iscsi_update_cmdsn. Signed-off-by:
-
Mike Christie authored
The previous patches converted iscsi_tcp to support sg chaining. This patch sets the proper flags and sets sg_table size to 4096. This allows fs io to be capped at max_sectors, but passthrough IO to be limited by some other part of the kernel. Signed-off-by:
-
Mike Christie authored
Older tools will not be setting the tmf time outs since they did not exists, so set them to a safe default. And export abort and lu reset timeout values in sysfs. Signed-off-by:
-
Mike Christie authored
A target should never send us a itt that does not match a running task. If it does we do not really know what is coming down after the header, unless we evaluate the hdr and do some guessing sometimes. However, even if we know what is coming we probably do not have buffers for it or we cannot respond (if it is a r2t for example), so just drop the session. Signed-off-by:
-
Olaf Kirch authored
iscsi_r2t_rsp checks the incoming R2T for sanity, and if it thinks it's fishy, it will drop it silently. In this case, we leaked an r2t_info object. If we do this often enough, we run into a BUG_ON some time later. Removed r2t wrappers and update patch by Mike Christie Signed-off-by:
Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by:
-
Olaf Kirch authored
Convert xmit to iscsi chunks. from michaelc@cs.wisc.edu: Bug fixes, more digest integration, sg chaining conversion and other sg wrapper changes, coding style sync up, and removal of io fields, like pdu_sent, that are not needed. Signed-off-by:
-
Mike Christie authored
The driver does not need the host lock in queuecommand so drop it. Signed-off-by:
-
