- 09 Feb, 2008 40 commits
-
-
Ian Campbell authored
Some important parts of f6df72e7 got dropped along the way, reintroduce them. Only affects paravirt guests. Signed-off-by:
Ian Campbell <ijc@hellion.org.uk> Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
Ian Campbell authored
Specifically the boot time page tables in a CONFIG_X86_PAE=y enabled kernel are in PAE format. early_ioremap is updated to use the standard page table accessors. Clear any mappings beyond max_low_pfn from the boot page tables in native_pagetable_setup_start because the initial mappings can extend beyond the range of physical memory and into the vmalloc area. Derived from patches by Eric Biederman and H. Peter Anvin. [ jeremy@goop.org: PAE swapper_pg_dir needs to be page-sized fix ] Signed-off-by:
-
Harvey Harrison authored
Other than the defconfigs, remove the entry in compiler-gcc4.h, Kconfig.debug and feature-removal-schedule.txt. Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Ingo Molnar authored
Use a common irq_return entry point for all the iret places, which need the paravirt INTERRUPT return wrapper. Signed-off-by:
-
Jiri Kosina authored
Document randomize_va_space and CONFIG_COMPAT_BRK. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Harvey Harrison authored
Add function definition and extern variables to asm-x86/acpi.h. All of these are used in bus.c in ifdef(CONFIG_X86) sections, so are only added to the x86 include headers. boot.c already includes acpi.h so no changes are needed there. Fixes the following: arch/x86/kernel/acpi/boot.c:83:4: warning: symbol 'acpi_sci_flags' was not declared. Should it be static? arch/x86/kernel/acpi/boot.c:84:5: warning: symbol 'acpi_sci_override_gsi' was not declared. Should it be static? arch/x86/kernel/acpi/boot.c:421:13: warning: symbol 'acpi_pic_sci_set_trigger' was not declared. Should it be static? Signed-off-by:
-
Harvey Harrison authored
arch/x86/kernel/topology.c:56:2: warning: returning void-valued expression Signed-off-by:
-
Harvey Harrison authored
Adjust the definition of lookup_address to take an unsigned long level argument. Adjust callers in xen/mmu.c that pass in a dummy variable. Signed-off-by:
-
Harvey Harrison authored
arch/x86/kernel/cpu/mcheck/therm_throt.c:121:2: warning: returning void-valued expression Signed-off-by:
-
Harvey Harrison authored
Use xen_khz to denote xen_specific clock speed. Avoid shadowing cpu_khz. arch/x86/xen/time.c:220:6: warning: symbol 'cpu_khz' shadows an earlier one include/asm/tsc.h:17:21: originally declared here Signed-off-by:
-
Arnd Hannemann authored
Signed-off-by:
Arnd Hannemann <hannemann@i4.informatik.rwth-aachen.de> Signed-off-by:
Andres Salomon <dilinger@debian.org> Signed-off-by:
-
Jordan Crouse authored
Each AMD Geode MFGPT timer interrupt output is paired with another timer; esentially the interrupt goes if either timer fires. This is okay, but the handlers need to be aware of this. Make sure in the timer tick handler that our timer really did expire. Signed-off-by:
Jordan Crouse <jordan.crouse@amd.com> Signed-off-by:
-
Andres Salomon authored
We *really* don't want to be reading MFGPTx_SETUP and writing back those values. What we want to be doing is clearing CMP1 and CMP2 unconditionally; otherwise, we have races where CMP1 and/or CMP2 fire after we've read MFGPTx_SETUP. They can also fire between when we've written ~CNTEN to the register, and when the new register values get copied to the timer's version of the register. By clearing both fields, we're okay. Signed-off-by:
-
Jordan Crouse authored
There isn't much value to always detecting the MFGPT timers on Geode platforms; detection is only needed when something wants to use the timers. Move the detection code so that it gets called the first time a timer is allocated. Signed-off-by:
-
Andres Salomon authored
We need to be called from elsewhere, and this gets some #ifdefs out of the .c file. Signed-off-by:
-
Andres Salomon authored
Drop F_AVAIL and the 'flags' field, replacing with an 'avail' bit. This looks more understandable to me. Signed-off-by:
-
Andres Salomon authored
We had planned to use the 'owner' field for allowing re-allocation of MFGPTs; however, doing it by module owner name isn't flexible enough. So, drop this for now. If it turns out that we need timers in modules, we'll need to come up with a scheme that matches the write-once fields of the MFGPTx_SETUP register, and drops ponies from the sky. Signed-off-by:
-
Willy Tarreau authored
The GEODE MFGPT code assumed that 32kHz was 32000 Hz while the boards run on a 32.768 kHz digital watch crystal. In practise, it will not change the timer's frequency as the skew was only 2.4%, but it should provide more accurate intervals. Signed-off-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Andres Salomon authored
- uninline timer functions; the compiler knows better than we do whether or not to inline these. - mfgpt_start_timer() had an unused 'clock' argument, drop it. From both Jordan and myself. Signed-off-by:
-
git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds authored
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] dynamic page tables. [S390] Add four level page tables for CONFIG_64BIT=y. [S390] 1K/2K page table pages. [S390] Remove a.out header file. [S390] sclp_vt220: Fix vt220 initialization [S390] qdio: avoid hang when establishing qdio queues [S390] VMEM_MAX_PHYS overflow on 31 bit. [S390] zcrypt: Do not start ap poll thread per default [S390] Fix __ffs_word_loop/__ffz_word_loop inlnie assembly. [S390] Wire up new timerfd syscalls. [S390] Update default configuration.
-
git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: Kbuild: Fix deb-pkg target to work with kernel versions ending with -<text-without-digit> ide: introduce HAVE_IDE kbuild: silence CHK/UPD messages according to $(quiet) scsi: fix makefile for aic7(3*x) kbuild/modpost: Use warn() for announcing section mismatches Add binoffset to gitignore kbuild/modpost: improve warnings if symbol is unknown
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: Merge branches 'release' and 'buildfix' into release acer-wmi - Add documentation sonypi - Move sonypi.txt to Documentation/laptops sony-laptop - Move sony-laptop.txt to Documentation/laptops thinkpad-acpi - Move thinkpad-acpi.txt to Documentation/laptops Documentation - Create laptops sub-directory ACPI: thermal: buildfix for CONFIG_THERMAL=n cpuidle: build fix for non-x86 acer-wmi: Fix backlight on AMW0 (V1) laptops tc1100-wmi: Mark as experimental ACPI: SBS: Host controller must initialize before SBS.
-
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmcLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: mmc: extend ricoh_mmc to support Ricoh RL5c476 at91_mci: use generic GPIO calls sdhci: add num index for multi controllers case MAINTAINERS: remove non-existant URLs mmc: remove sdhci and mmc_spi experimental markers mmc: Handle suspend/resume in Ricoh MMC disabler
-
git://git.infradead.org/mtd-2.6Linus Torvalds authored
* git://git.infradead.org/mtd-2.6: [MTD] [NAND] cs553x_nand: command line partitioning support
-
Alex Dubov authored
Sony MemoryStick cards are used in many products manufactured by Sony. They are available both as storage and as IO expansion cards. Currently, only MemoryStick Pro storage cards are supported via TI FlashMedia MemoryStick interface. [mboton@gmail.com: biuld fix] [akpm@linux-foundation.org: build fix] Signed-off-by:
Alex Dubov <oakad@yahoo.com> Signed-off-by:
Miguel Boton <mboton@gmail.co> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Martin Schwidefsky authored
CC init/main.o In file included from include2/asm/uaccess.h:8, from include/linux/poll.h:13, from include/linux/rtc.h:113, from include/linux/efi.h:19, from linux-2.6/init/main.c:43: include/linux/mm.h:1151: error: expected declaration specifiers or '...' before 'pgtable_t' Signed-off-by:Martin Schwidefsky <schwidefsky@de.ibm.com> Reported-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Martin Schwidefsky authored
The pte_fn_t in include/linux/mm.h make it necessary for all architectures to define a pgtable_t type, even those that do not have an mmu. Signed-off-by:
-
Pete Zaitcev authored
Signed-off-by:
Pete Zaitcev <zaitcev@redhat.com> Cc: "Oliver Pinter" <oliver.pntr@gmail.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Christoph Hellwig authored
- remove non-standard in/out markers - use tabs for formatting Signed-off-by:
Christoph Hellwig <hch@lst.de> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Cc: Erez Zadok <ezk@cs.sunysb.edu> Signed-off-by:
-
David Rientjes authored
mm_cgroup() is exclusively used to test whether an mm's mem_cgroup pointer is pointing to a specific cgroup. Instead of returning the pointer, we can just do the test itself in a new macro: vm_match_cgroup(mm, cgroup) returns non-zero if the mm's mem_cgroup points to cgroup. Otherwise it returns zero. Signed-off-by:
David Rientjes <rientjes@google.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Jiri Kosina authored
/home/bunk/linux/kernel-2.6/git/linux-2.6/fs/hostfs/hostfs_kern.c: In function 'hostfs_show_options': /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/hostfs/hostfs_kern.c:328: error: dereferencing pointer to incomplete type We need to include mount.h to get vfsmount. Signed-off-by:
-
Matt Mackall authored
CC mm/vmscan.o In file included from /home/bunk/linux/kernel-2.6/git/linux-2.6/mm/vmscan.c:44: /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/swapops.h: In function 'is_swap_pte': /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/swapops.h:48: error: implicit declaration of function 'pte_none' /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/swapops.h:48: error: implicit declaration of function 'pte_present' Does it ever make sense to ask "is this pte a swap entry?" on a machine with no MMU? Presumably this also means it has no ptes too, right? In which case, it's better to comment the whole function out. Then when someone tries to ask the above meaningless question, they get a compile error rather than a meaningless answer. Signed-off-by:
Matt Mackall <mpm@selenic.com> Cc: Mike Frysinger <vapier@gentoo.org> Reported-by:
-
Martin Schwidefsky authored
Add support for different number of page table levels dependent on the highest address used for a process. This will cause a 31 bit process to use a two level page table instead of the four level page table that is the default after the pud has been introduced. Likewise a normal 64 bit process will use three levels instead of four. Only if a process runs out of the 4 tera bytes which can be addressed with a three level page table the fourth level is dynamically added. Then the process can use up to 8 peta byte. Signed-off-by: -
Martin Schwidefsky authored
Signed-off-by: -
Martin Schwidefsky authored
This patch implements 1K/2K page table pages for s390. Signed-off-by: -
Martin Schwidefsky authored
Signed-off-by: -
Christian Borntraeger authored
There are two problems in the vt220 intialization: o Currently the vt220 console looses early printk events until the the vt220 tty is registered. o console should work if tty_register fails sclp_vt220_con_init calls __sclp_vt220_init and register_console. It does not register the driver with the sclp core code via sclp_register. That results in an sclp_send_mask=0. Therefore, __sclp_vt220_emit will reject buffers with EIO. Unfortunately register_console will cause the printk buffer to be sent to the console and, therefore, every early message gets dropped. The sclp_send_mask is set later during boot, when sclp_vt220_tty_init calls sclp_register. The solution is to move the sclp_register call from sclp_vt220_tty_init to __sclp_vt220_init. This makes sure that the console is properly registered with the sclp subsystem before the first log buffer messages are passed to the vt220 console. We also adopt the cleanup on error to keep the console alive if tty_register fails. Thanks to Peter Oberparleiter and Heiko Carstens for review and ideas for improvement. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Ursula Braun authored
If qdio establish runs in parallel with a channel error, ccw_device_start_timeout may not trigger the qdio_timeout_handler. In this case neither QDIO_IRQ_STATE_ESTABLISHED nor QDIO_IRQ_STATE_ERR is reached and the following wait_event hangs forever. Solution: do not make use of the timeout option with ccw_device_start, but add a timeout to the following wait_event. Signed-off-by:
Ursula Braun <braunu@de.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
With the new space saving spinlock_t and a non-debug configuration the struct page only has 32 bytes for 31 bit s390. The causes an overflow in the calculation of VMEM_MAX_PHYS which renders the kernel unbootable. Signed-off-by:
-
