- 08 Oct, 2019 2 commits
-
-
Eric Biggers authored
syzbot reported: BUG: memory leak unreferenced object 0xffff88811eb3de00 (size 224): comm "syz-executor559", pid 7315, jiffies 4294943019 (age 10.300s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 a0 38 24 81 88 ff ff 00 c0 f2 15 81 88 ff ff ..8$............ backtrace: [<000000008d1c66a1>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline] [<000000008d1c66a1>] slab_post_alloc_hook mm/slab.h:439 [inline] [<000000008d1c66a1>] slab_alloc_node mm/slab.c:3269 [inline] [<000000008d1c66a1>] kmem_cache_alloc_node+0x153/0x2a0 mm/slab.c:3579 [<00000000447d9496>] __alloc_skb+0x6e/0x210 net/core/skbuff.c:198 [<000000000cdbf82f>] alloc_skb include/linux/skbuff.h:1058 [inline] [<000000000cdbf82f>] llc_alloc_frame+0x66/0x110 net/llc/llc_sap.c:54 [<000000002418b52e>] llc_conn_ac_send_sabme_cmd_p_set_x+0x2f/0x140 net/llc/llc_c_ac.c:777 [<000000001372ae17>] llc_exec_conn_trans_actions net/llc/llc_conn.c:475 [inline] [<000000001372ae17>] llc_conn_service net/llc/llc_conn.c:400 [inline] [<000000001372ae17>] llc_conn_state_process+0x1ac/0x640 net/llc/llc_conn.c:75 [<00000000f27e53c1>] llc_establish_connection+0x110/0x170 net/llc/llc_if.c:109 [<00000000291b2ca0>] llc_ui_connect+0x10e/0x370 net/llc/af_llc.c:477 [<000000000f9c740b>] __sys_connect+0x11d/0x170 net/socket.c:1840 [...] The bug is that most callers of llc_conn_send_pdu() assume it consumes a reference to the skb, when actually due to commit b85ab56c ("llc: properly handle dev_queue_xmit() return value") it doesn't. Revert most of that commit, and instead make the few places that need llc_conn_send_pdu() to *not* consume a reference call skb_get() before. Fixes: b85ab56c ("llc: properly handle dev_queue_xmit() return value") Reported-by: syzbot+6b825a6494a04cc0e3f7@syzkaller.appspotmail.com Signed-off-by:Eric Biggers <ebiggers@google.com> Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com>
-
Eric Biggers authored
syzbot reported: BUG: memory leak unreferenced object 0xffff888116270800 (size 224): comm "syz-executor641", pid 7047, jiffies 4294947360 (age 13.860s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 20 e1 2a 81 88 ff ff 00 40 3d 2a 81 88 ff ff . .*.....@=*.... backtrace: [<000000004d41b4cc>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline] [<000000004d41b4cc>] slab_post_alloc_hook mm/slab.h:439 [inline] [<000000004d41b4cc>] slab_alloc_node mm/slab.c:3269 [inline] [<000000004d41b4cc>] kmem_cache_alloc_node+0x153/0x2a0 mm/slab.c:3579 [<00000000506a5965>] __alloc_skb+0x6e/0x210 net/core/skbuff.c:198 [<000000001ba5a161>] alloc_skb include/linux/skbuff.h:1058 [inline] [<000000001ba5a161>] alloc_skb_with_frags+0x5f/0x250 net/core/skbuff.c:5327 [<0000000047d9c78b>] sock_alloc_send_pskb+0x269/0x2a0 net/core/sock.c:2225 [<000000003828fe54>] sock_alloc_send_skb+0x32/0x40 net/core/sock.c:2242 [<00000000e34d94f9>] llc_ui_sendmsg+0x10a/0x540 net/llc/af_llc.c:933 [<00000000de2de3fb>] sock_sendmsg_nosec net/socket.c:652 [inline] [<00000000de2de3fb>] sock_sendmsg+0x54/0x70 net/socket.c:671 [<000000008fe16e7a>] __sys_sendto+0x148/0x1f0 net/socket.c:1964 [...] The bug is that llc_sap_state_process() always takes an extra reference to the skb, but sometimes neither llc_sap_next_state() nor llc_sap_state_process() itself drops this reference. Fix it by changing llc_sap_next_state() to never consume a reference to the skb, rather than sometimes do so and sometimes not. Then remove the extra skb_get() and kfree_skb() from llc_sap_state_process(). Reported-by: syzbot+6bf095f9becf5efef645@syzkaller.appspotmail.com Reported-by: syzbot+31c16aa4202dace3812e@syzkaller.appspotmail.com Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
- 07 Oct, 2019 9 commits
-
-
Antonio Borneo authored
Fix typo s/mechansim/mechanism/ Signed-off-by:
Antonio Borneo <antonio.borneo@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Shannon Nelson authored
When the netdev is down, the queues and their debug stats do not exist, so don't try using a pointer to them when when printing the ethtool stats. Fixes: e470355b ("ionic: Add driver stats") Signed-off-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fsDavid S. Miller authored
David Howells says: ==================== rxrpc: Syzbot-inspired fixes Here's a series of patches that fix a number of issues found by syzbot: (1) A reference leak on rxrpc_call structs in a sendmsg error path. (2) A tracepoint that looked in the rxrpc_peer record after putting it. Analogous with this, though not presently detected, the same bug is also fixed in relation to rxrpc_connection and rxrpc_call records. (3) Peer records don't pin local endpoint records, despite accessing them. (4) Access to connection crypto ops to clean up a call after the call's ref on that connection has been put. ==================== Signed-off-by: -
David Howells authored
Fix the cleanup of the crypto state on a call after the call has been disconnected. As the call has been disconnected, its connection ref has been discarded and so we can't go through that to get to the security ops table. Fix this by caching the security ops pointer in the rxrpc_call struct and using that when freeing the call security state. Also use this in other places we're dealing with call-specific security. The symptoms look like: BUG: KASAN: use-after-free in rxrpc_release_call+0xb2d/0xb60 net/rxrpc/call_object.c:481 Read of size 8 at addr ffff888062ffeb50 by task syz-executor.5/4764 Fixes: 1db88c53 ("rxrpc: Fix -Wframe-larger-than= warnings from on-stack crypto") Reported-by: syzbot+eed305768ece6682bb7f@syzkaller.appspotmail.com Signed-off-by:David Howells <dhowells@redhat.com>
-
David Howells authored
The rxrpc_peer record needs to hold a reference on the rxrpc_local record it points as the peer is used as a base to access information in the rxrpc_local record. This can cause problems in __rxrpc_put_peer(), where we need the network namespace pointer, and in rxrpc_send_keepalive(), where we need to access the UDP socket, leading to symptoms like: BUG: KASAN: use-after-free in __rxrpc_put_peer net/rxrpc/peer_object.c:411 [inline] BUG: KASAN: use-after-free in rxrpc_put_peer+0x685/0x6a0 net/rxrpc/peer_object.c:435 Read of size 8 at addr ffff888097ec0058 by task syz-executor823/24216 Fix this by taking a ref on the local record for the peer record. Fixes: ace45bec ("rxrpc: Fix firewall route keepalive") Fixes: 2baec2c3 ("rxrpc: Support network namespacing") Reported-by: syzbot+b9be979c55f2bea8ed30@syzkaller.appspotmail.com Signed-off-by: -
David Howells authored
rxrpc_put_call() calls trace_rxrpc_call() after it has done the decrement of the refcount - which looks at the debug_id in the call record. But unless the refcount was reduced to zero, we no longer have the right to look in the record and, indeed, it may be deleted by some other thread. Fix this by getting the debug_id out before decrementing the refcount and then passing that into the tracepoint. Fixes: e34d4234 ("rxrpc: Trace rxrpc_call usage") Signed-off-by:
-
David Howells authored
rxrpc_put_*conn() calls trace_rxrpc_conn() after they have done the decrement of the refcount - which looks at the debug_id in the connection record. But unless the refcount was reduced to zero, we no longer have the right to look in the record and, indeed, it may be deleted by some other thread. Fix this by getting the debug_id out before decrementing the refcount and then passing that into the tracepoint. Fixes: 363deeab ("rxrpc: Add connection tracepoint and client conn state tracepoint") Signed-off-by:
-
David Howells authored
rxrpc_put_peer() calls trace_rxrpc_peer() after it has done the decrement of the refcount - which looks at the debug_id in the peer record. But unless the refcount was reduced to zero, we no longer have the right to look in the record and, indeed, it may be deleted by some other thread. Fix this by getting the debug_id out before decrementing the refcount and then passing that into the tracepoint. This can cause the following symptoms: BUG: KASAN: use-after-free in __rxrpc_put_peer net/rxrpc/peer_object.c:411 [inline] BUG: KASAN: use-after-free in rxrpc_put_peer+0x685/0x6a0 net/rxrpc/peer_object.c:435 Read of size 8 at addr ffff888097ec0058 by task syz-executor823/24216 Fixes: 1159d4b4 ("rxrpc: Add a tracepoint to track rxrpc_peer refcounting") Reported-by: syzbot+b9be979c55f2bea8ed30@syzkaller.appspotmail.com Signed-off-by: -
David Howells authored
When sendmsg() finds a call to continue on with, if the call is in an inappropriate state, it doesn't release the ref it just got on that call before returning an error. This causes the following symptom to show up with kasan: BUG: KASAN: use-after-free in rxrpc_send_keepalive+0x8a2/0x940 net/rxrpc/output.c:635 Read of size 8 at addr ffff888064219698 by task kworker/0:3/11077 where line 635 is: whdr.epoch = htonl(peer->local->rxnet->epoch); The local endpoint (which cannot be pinned by the call) has been released, but not the peer (which is pinned by the call). Fix this by releasing the call in the error path. Fixes: 37411cad ("rxrpc: Fix potential NULL-pointer exception") Reported-by: syzbot+d850c266e3df14da1d31@syzkaller.appspotmail.com Signed-off-by:
-
- 06 Oct, 2019 5 commits
-
-
David S. Miller authored
Jose Abreu says: ==================== net: stmmac: Fixes for -net Fixes for -net. More info in commit logs. ==================== Signed-off-by: -
Jose Abreu authored
With the current MAC addresses hard-coded in the test we can get some false positives as we use the Hash Filtering method. Let's change the MAC addresses in the tests to be unique when hashed. Fixes: 091810db ("net: stmmac: Introduce selftests support") Signed-off-by:
Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by:
-
Jose Abreu authored
Some setups may not have all Unicast addresses filters available. Check the number of available filters before trying to setup it. Fixes: 477286b5 ("stmmac: add GMAC4 core support") Signed-off-by:
-
Jose Abreu authored
We need to check if the number of available Hash Filters is enough to run the test, otherwise we will get false failures. Fixes: 091810db ("net: stmmac: Introduce selftests support") Signed-off-by:
-
Florian Fainelli authored
Clearing the existing bitmask of mirrored ports essentially prevents us from capturing more than one port at any given time. This is clearly wrong, do not clear the bitmask prior to setting up the new port. Reported-by:
Hubert Feurstein <h.feurstein@gmail.com> Fixes: ed3af5fd ("net: dsa: b53: Add support for port mirroring") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by:
-
- 05 Oct, 2019 24 commits
-
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - remove unneeded ar-option and KBUILD_ARFLAGS - remove long-deprecated SUBDIRS - fix modpost to suppress false-positive warnings for UML builds - fix namespace.pl to handle relative paths to ${objtree}, ${srctree} - make setlocalversion work for /bin/sh - make header archive reproducible - fix some Makefiles and documents * tag 'kbuild-fixes-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kheaders: make headers archive reproducible kbuild: update compile-test header list for v5.4-rc2 kbuild: two minor updates for Documentation/kbuild/modules.rst scripts/setlocalversion: clear local variable to make it work for sh namespace: fix namespace.pl script to support relative paths video/logo: do not generate unneeded logo C files video/logo: remove unneeded *.o pattern from clean-files integrity: remove pointless subdir-$(CONFIG_...) integrity: remove unneeded, broken attempt to add -fshort-wchar modpost: fix static EXPORT_SYMBOL warnings for UML build kbuild: correct formatting of header in kbuild module docs kbuild: remove SUBDIRS support kbuild: remove ar-option and KBUILD_ARFLAGS
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Twelve patches mostly small but obvious fixes or cosmetic but small updates" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: Fix Nport ID display value scsi: qla2xxx: Fix N2N link up fail scsi: qla2xxx: Fix N2N link reset scsi: qla2xxx: Optimize NPIV tear down process scsi: qla2xxx: Fix stale mem access on driver unload scsi: qla2xxx: Fix unbound sleep in fcport delete path. scsi: qla2xxx: Silence fwdump template message scsi: hisi_sas: Make three functions static scsi: megaraid: disable device when probe failed after enabled device scsi: storvsc: setup 1:1 mapping between hardware queue and CPU queue scsi: qedf: Remove always false 'tmp_prio < 0' statement scsi: ufs: skip shutdown if hba is not powered scsi: bnx2fc: Handle scope bits when array returns BUSY or TSF
-
Linus Torvalds authored
This makes getdents() and getdents64() do sanity checking on the pathname that it gives to user space. And to mitigate the performance impact of that, it first cleans up the way it does the user copying, so that the code avoids doing the SMAP/PAN updates between each part of the dirent structure write. I really wanted to do this during the merge window, but didn't have time. The conversion of filldir to unsafe_put_user() is something I've had around for years now in a private branch, but the extra pathname checking finally made me clean it up to the point where it is mergable. It's worth noting that the filename validity checking really should be a bit smarter: it would be much better to delay the error reporting until the end of the readdir, so that non-corrupted filenames are still returned. But that involves bigger changes, so let's see if anybody actually hits the corrupt directory entry case before worrying about it further. * branch 'readdir': Make filldir[64]() verify the directory entry filename is valid Convert filldir[64]() from __put_user() to unsafe_put_user()
-
Linus Torvalds authored
This has been discussed several times, and now filesystem people are talking about doing it individually at the filesystem layer, so head that off at the pass and just do it in getdents{64}(). This is partially based on a patch by Jann Horn, but checks for NUL bytes as well, and somewhat simplified. There's also commentary about how it might be better if invalid names due to filesystem corruption don't cause an immediate failure, but only an error at the end of the readdir(), so that people can still see the filenames that are ok. There's also been discussion about just how much POSIX strictly speaking requires this since it's about filesystem corruption. It's really more "protect user space from bad behavior" as pointed out by Jann. But since Eric Biederman looked up the POSIX wording, here it is for context: "From readdir: The readdir() function shall return a pointer to a structure representing the directory entry at the current position in the directory stream specified by the argument dirp, and position the directory stream at the next entry. It shall return a null pointer upon reaching the end of the directory stream. The structure dirent defined in the <dirent.h> header describes a directory entry. From definitions: 3.129 Directory Entry (or Link) An object that associates a filename with a file. Several directory entries can associate names with the same file. ... 3.169 Filename A name consisting of 1 to {NAME_MAX} bytes used to name a file. The characters composing the name may be selected from the set of all character values excluding the slash character and the null byte. The filenames dot and dot-dot have special meaning. A filename is sometimes referred to as a 'pathname component'." Note that I didn't bother adding the checks to any legacy interfaces that nobody uses. Also note that if this ends up being noticeable as a performance regression, we can fix that to do a much more optimized model that checks for both NUL and '/' at the same time one word at a time. We haven't really tended to optimize 'memchr()', and it only checks for one pattern at a time anyway, and we really _should_ check for NUL too (but see the comment about "soft errors" in the code about why it currently only checks for '/') See the CONFIG_DCACHE_WORD_ACCESS case of hash_name() for how the name lookup code looks for pathname terminating characters in parallel. Link: https://lore.kernel.org/lkml/20190118161440.220134-2-jannh@google.com/ Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jann Horn <jannh@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
We really should avoid the "__{get,put}_user()" functions entirely, because they can easily be mis-used and the original intent of being used for simple direct user accesses no longer holds in a post-SMAP/PAN world. Manually optimizing away the user access range check makes no sense any more, when the range check is generally much cheaper than the "enable user accesses" code that the __{get,put}_user() functions still need. So instead of __put_user(), use the unsafe_put_user() interface with user_access_{begin,end}() that really does generate better code these days, and which is generally a nicer interface. Under some loads, the multiple user writes that filldir() does are actually quite noticeable. This also makes the dirent name copy use unsafe_put_user() with a couple of macros. We do not want to make function calls with SMAP/PAN disabled, and the code this generates is quite good when the architecture uses "asm goto" for unsafe_put_user() like x86 does. Note that this doesn't bother with the legacy cases. Nobody should use them anyway, so performance doesn't really matter there. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix ieeeu02154 atusb driver use-after-free, from Johan Hovold. 2) Need to validate TCA_CBQ_WRROPT netlink attributes, from Eric Dumazet. 3) txq null deref in mac80211, from Miaoqing Pan. 4) ionic driver needs to select NET_DEVLINK, from Arnd Bergmann. 5) Need to disable bh during nft_connlimit GC, from Pablo Neira Ayuso. 6) Avoid division by zero in taprio scheduler, from Vladimir Oltean. 7) Various xgmac fixes in stmmac driver from Jose Abreu. 8) Avoid 64-bit division in mlx5 leading to link errors on 32-bit from Michal Kubecek. 9) Fix bad VLAN check in rtl8366 DSA driver, from Linus Walleij. 10) Fix sleep while atomic in sja1105, from Vladimir Oltean. 11) Suspend/resume deadlock in stmmac, from Thierry Reding. 12) Various UDP GSO fixes from Josh Hunt. 13) Fix slab out of bounds access in tcp_zerocopy_receive(), from Eric Dumazet. 14) Fix OOPS in __ipv6_ifa_notify(), from David Ahern. 15) Memory leak in NFC's llcp_sock_bind, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits) selftests/net: add nettest to .gitignore net: qlogic: Fix memory leak in ql_alloc_large_buffers nfc: fix memory leak in llcp_sock_bind() sch_dsmark: fix potential NULL deref in dsmark_init() net: phy: at803x: use operating parameters from PHY-specific status net: phy: extract pause mode net: phy: extract link partner advertisement reading net: phy: fix write to mii-ctrl1000 register ipv6: Handle missing host route in __ipv6_ifa_notify net: phy: allow for reset line to be tied to a sleepy GPIO controller net: ipv4: avoid mixed n_redirects and rate_tokens usage r8152: Set macpassthru in reset_resume callback cxgb4:Fix out-of-bounds MSI-X info array access Revert "ipv6: Handle race in addrconf_dad_work" net: make sock_prot_memory_pressure() return "const char *" rxrpc: Fix rxrpc_recvmsg tracepoint qmi_wwan: add support for Cinterion CLS8 devices tcp: fix slab-out-of-bounds in tcp_zerocopy_receive() lib: textsearch: fix escapes in example code udp: only do GSO if # of segs > 1 ... -
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Vasily Gorbik: - defconfig updates - Fix build errors with CC_OPTIMIZE_FOR_SIZE due to usage of "i" constraint for function arguments. Two kvm changes acked-by Christian Borntraeger. - Fix -Wunused-but-set-variable warnings in mm code. - Avoid a constant misuse in qdio. - Handle a case when cpumf is temporarily unavailable. * tag 's390-5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: KVM: s390: mark __insn32_query() as __always_inline KVM: s390: fix __insn32_query() inline assembly s390: update defconfigs s390/pci: mark function(s) __always_inline s390/mm: mark function(s) __always_inline s390/jump_label: mark function(s) __always_inline s390/cpu_mf: mark function(s) __always_inline s390/atomic,bitops: mark function(s) __always_inline s390/mm: fix -Wunused-but-set-variable warnings s390: mark __cpacf_query() as __always_inline s390/qdio: clarify size of the QIB parm area s390/cpumf: Fix indentation in sampling device driver s390/cpumsf: Check for CPU Measurement sampling s390/cpumf: Use consistant debug print format
-
Heiko Carstens authored
__insn32_query() will not compile if the compiler decides to not inline it, since it contains an inline assembly with an "i" constraint with variable contents. Acked-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com>
-
Heiko Carstens authored
The inline assembly constraints of __insn32_query() tell the compiler that only the first byte of "query" is being written to. Intended was probably that 32 bytes are written to. Fix and simplify the code and just use a "memory" clobber. Fixes: d6681397 ("KVM: s390: provide query function for instructions returning 32 byte") Cc: stable@vger.kernel.org # v5.2+ Acked-by:
-
Dmitry Goldin authored
In commit 43d8ce9d ("Provide in-kernel headers to make extending kernel easier") a new mechanism was introduced, for kernels >=5.2, which embeds the kernel headers in the kernel image or a module and exposes them in procfs for use by userland tools. The archive containing the header files has nondeterminism caused by header files metadata. This patch normalizes the metadata and utilizes KBUILD_BUILD_TIMESTAMP if provided and otherwise falls back to the default behaviour. In commit f7b101d3 ("kheaders: Move from proc to sysfs") it was modified to use sysfs and the script for generation of the archive was renamed to what is being patched. Signed-off-by:
Dmitry Goldin <dgoldin+lkml@protonmail.ch> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com>
-
Masahiro Yamada authored
Commit 6dc280eb ("coda: remove uapi/linux/coda_psdev.h") removed a header in question. Some more build errors were fixed. Add more headers into the test coverage. Signed-off-by:
-
Masahiro Yamada authored
Capitalize the first word in the sentence. Use obj-m instead of obj-y. obj-y still works, but we have no built-in objects in external module builds. So, obj-m is better IMHO. Signed-off-by: -
Masahiro Yamada authored
Geert Uytterhoeven reports a strange side-effect of commit 858805b3 ("kbuild: add $(BASH) to run scripts with bash-extension"), which inserts the contents of a localversion file in the build directory twice. [Steps to Reproduce] $ echo bar > localversion $ mkdir build $ cd build/ $ echo foo > localversion $ make -s -f ../Makefile defconfig include/config/kernel.release $ cat include/config/kernel.release 5.4.0-rc1foofoobar This comes down to the behavior change of local variables. The 'man sh' on my Ubuntu machine, where sh is an alias to dash, explains as follows: When a variable is made local, it inherits the initial value and exported and readonly flags from the variable with the same name in the surrounding scope, if there is one. Otherwise, the variable is initially unset. [Test Code] foo () { local res echo "res: $res" } res=1 foo [Result] $ sh test.sh res: 1 $ bash test.sh res: So, scripts/setlocalversion correctly works only for bash in spite of its hashbang being #!/bin/sh. Nobody had noticed it before because CONFIG_SHELL was previously set to bash almost all the time. Now that CONFIG_SHELL is set to sh, we must write portable and correct code. I gave the Fixes tag to the commit that uncovered the issue. Clear the variable 'res' in collect_files() to make it work for sh (and it also works on distributions where sh is an alias to bash). Fixes: 858805b3 ("kbuild: add $(BASH) to run scripts with bash-extension") Reported-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Jacob Keller authored
The namespace.pl script does not work properly if objtree is not set to an absolute path. The do_nm function is run from within the find function, which changes directories. Because of this, appending objtree, $File::Find::dir, and $source, will return a path which is not valid from the current directory. This used to work when objtree was set to an absolute path when using "make namespacecheck". It appears to have not worked when calling ./scripts/namespace.pl directly. This behavior was changed in 7e1c0477 ("kbuild: Use relative path for $(objtree)", 2014-05-14) Rather than fixing the Makefile to set objtree to an absolute path, just fix namespace.pl to work when srctree and objtree are relative. Also fix the script to use an absolute path for these by default. Use the File::Spec module for this purpose. It's been part of perl 5 since 5.005. The curdir() function is used to get the current directory when the objtree and srctree aren't set in the environment. rel2abs() is used to convert possibly relative objtree and srctree environment variables to absolute paths. Finally, the catfile() function is used instead of string appending paths together, since this is more robust when joining paths together. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Tested-by:
-
Masahiro Yamada authored
Currently, all the logo C files are generated irrespective of the CONFIG options. Adding them to extra-y is wrong. What we need to do here is to add them to 'targets' so that if_changed works properly. Files listed in 'targets' are cleaned, so clean-files is unneeded. Signed-off-by: -
Masahiro Yamada authored
The pattern *.o is cleaned up globally by the top Makefile. Signed-off-by: -
Masahiro Yamada authored
The ima/ and evm/ sub-directories contain built-in objects, so obj-$(CONFIG_...) is the correct way to descend into them. subdir-$(CONFIG_...) is redundant. Signed-off-by: -
Masahiro Yamada authored
I guess commit 15ea0e1e ("efi: Import certificates from UEFI Secure Boot") attempted to add -fshort-wchar for building load_uefi.o, but it has never worked as intended. load_uefi.o is created in the platform_certs/ sub-directory. If you really want to add -fshort-wchar, the correct code is: $(obj)/platform_certs/load_uefi.o: KBUILD_CFLAGS += -fshort-wchar But, you do not need to fix it. Commit 8c97023c ("Kbuild: use -fshort-wchar globally") had already added -fshort-wchar globally. This code was unneeded in the first place. Signed-off-by:
-
Jakub Kicinski authored
nettest is missing from gitignore. Fixes: acda655f ("selftests: Add nettest") Signed-off-by:
-
Navid Emamdoost authored
In ql_alloc_large_buffers, a new skb is allocated via netdev_alloc_skb. This skb should be released if pci_dma_mapping_error fails. Fixes: 0f8ab89e ("qla3xxx: Check return code from pci_map_single() in ql_release_to_lrg_buf_free_list(), ql_populate_free_queue(), ql_alloc_large_buffers(), and ql3xxx_send()") Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by:
-
Eric Dumazet authored
sysbot reported a memory leak after a bind() has failed. While we are at it, abort the operation if kmemdup() has failed. BUG: memory leak unreferenced object 0xffff888105d83ec0 (size 32): comm "syz-executor067", pid 7207, jiffies 4294956228 (age 19.430s) hex dump (first 32 bytes): 00 69 6c 65 20 72 65 61 64 00 6e 65 74 3a 5b 34 .ile read.net:[4 30 32 36 35 33 33 30 39 37 5d 00 00 00 00 00 00 026533097]...... backtrace: [<0000000036bac473>] kmemleak_alloc_recursive /./include/linux/kmemleak.h:43 [inline] [<0000000036bac473>] slab_post_alloc_hook /mm/slab.h:522 [inline] [<0000000036bac473>] slab_alloc /mm/slab.c:3319 [inline] [<0000000036bac473>] __do_kmalloc /mm/slab.c:3653 [inline] [<0000000036bac473>] __kmalloc_track_caller+0x169/0x2d0 /mm/slab.c:3670 [<000000000cd39d07>] kmemdup+0x27/0x60 /mm/util.c:120 [<000000008e57e5fc>] kmemdup /./include/linux/string.h:432 [inline] [<000000008e57e5fc>] llcp_sock_bind+0x1b3/0x230 /net/nfc/llcp_sock.c:107 [<000000009cb0b5d3>] __sys_bind+0x11c/0x140 /net/socket.c:1647 [<00000000492c3bbc>] __do_sys_bind /net/socket.c:1658 [inline] [<00000000492c3bbc>] __se_sys_bind /net/socket.c:1656 [inline] [<00000000492c3bbc>] __x64_sys_bind+0x1e/0x30 /net/socket.c:1656 [<0000000008704b2a>] do_syscall_64+0x76/0x1a0 /arch/x86/entry/common.c:296 [<000000009f4c57a4>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 30cc4587 ("NFC: Move LLCP code to the NFC top level diirectory") Signed-off-by:Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Eric Dumazet authored
Make sure TCA_DSMARK_INDICES was provided by the user. syzbot reported : kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 8799 Comm: syz-executor235 Not tainted 5.3.0+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:nla_get_u16 include/net/netlink.h:1501 [inline] RIP: 0010:dsmark_init net/sched/sch_dsmark.c:364 [inline] RIP: 0010:dsmark_init+0x193/0x640 net/sched/sch_dsmark.c:339 Code: 85 db 58 0f 88 7d 03 00 00 e8 e9 1a ac fb 48 8b 9d 70 ff ff ff 48 b8 00 00 00 00 00 fc ff df 48 8d 7b 04 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 01 38 d0 7c 08 84 d2 0f 85 ca RSP: 0018:ffff88809426f3b8 EFLAGS: 00010247 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff85c6eb09 RDX: 0000000000000000 RSI: ffffffff85c6eb17 RDI: 0000000000000004 RBP: ffff88809426f4b0 R08: ffff88808c4085c0 R09: ffffed1015d26159 R10: ffffed1015d26158 R11: ffff8880ae930ac7 R12: ffff8880a7e96940 R13: dffffc0000000000 R14: ffff88809426f8c0 R15: 0000000000000000 FS: 0000000001292880(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000080 CR3: 000000008ca1b000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: qdisc_create+0x4ee/0x1210 net/sched/sch_api.c:1237 tc_modify_qdisc+0x524/0x1c50 net/sched/sch_api.c:1653 rtnetlink_rcv_msg+0x463/0xb00 net/core/rtnetlink.c:5223 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5241 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0x531/0x710 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x8a5/0xd60 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:657 ___sys_sendmsg+0x803/0x920 net/socket.c:2311 __sys_sendmsg+0x105/0x1d0 net/socket.c:2356 __do_sys_sendmsg net/socket.c:2365 [inline] __se_sys_sendmsg net/socket.c:2363 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2363 do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x440369 Fixes: 758cc43c ("[PKT_SCHED]: Fix dsmark to apply changes consistent") Signed-off-by:
-
David S. Miller authored
Russell King says: ==================== Fix regression with AR8035 speed downgrade The following series attempts to address an issue spotted by tinywrkb with the AR8035 on the Cubox-i2 in a situation where the PHY downgrades the negotiated link. This is version 2, not much has changed other than rebasing on the current net tree. Changes have happend to patch 2 due to conflicts, so I dropped Andrew's reviewed-by. Minor context changes to patch 4 which I don't consider important enough to warrant dropping the reviewed-by. Before commit 5502b218 ("net: phy: use phy_resolve_aneg_linkmode in genphy_read_status"), we would read not only the link partner's advertisement, but also our own advertisement from the PHY registers, and use both to derive the PHYs current link mode. This works when the AR8035 downgrades the speed, because it appears that the AR8035 clears link mode bits in the advertisement registers as part of the downgrade. Commentary: what is not yet known is whether the AR8035 restores the advertisement register when the link goes down to the previous state. However, since the above referenced commit, we no longer use the PHYs advertisement registers, instead converting the link partner's advertisement to the ethtool link mode array, and combine that with phylib's cached version of our advertisement - which is not updated on speed downgrade. This results in phylib disagreeing with the actual operating mode of the PHY. Commentary: I wonder how many more PHY drivers are broken by this commit, but have yet to be discovered. The obvious way to address this would be to disable the downgrade feature, and indeed this does fix the problem in tinywrkb's case - his link partner instead downgrades the speed by reducing its advertisement, resulting in phylib correctly evaluating a slower speed. However, it has a serious drawback - the gigabit control register (MII register 9) appears to become read only. It seems the only way to update the register is to re-enable the downgrade feature, reset the PHY, changing register 9, disable the downgrade feature, and reset the PHY again. This series attempts to address the problem using a different approach, similar to the approach taken with Marvell PHYs. The AR8031, AR8033 and AR8035 have a PHY-Specific Status register which reports the actual operating mode of the PHY - both speed and duplex. This register correctly reports the operating mode irrespective of whether autoneg is enabled or not. We use this register to fill in phylib's speed and duplex parameters. In detail: Patch 1 fixes a bug where writing to register 9 does not update phylib's advertisement mask in the same way that writing register 4 does; this looks like an omission from when gigabit PHY support came into being. Patch 2 seperates the generic phylib code which reads the link partners advertisement from the PHY, so that we can re-use this in the Atheros PHY driver. Patch 3 seperates the generic phylib pause mode; phylib provides no help for MAC drivers to ascertain the negotiated pause mode, it merely copies the link partner's pause mode bits into its own variables. Commentary: Both the aforementioned Atheros PHYs and Marvell PHYs provide the resolved pause modes in terms of whether we should transmit pause frames, or whether we should allow reception of pause frames. Surely the resolution of this should be in phylib? Patch 4 provides the Atheros PHY driver with a private "read_status" implementation that fills in phylib's speed and duplex settings depending on the PHY-Specific status register. This ensures that phylib and the MAC driver match the operating mode that the PHY has decided to use. Since the register also gives us MDIX status, we can trivially fill that status in as well. Note that, although the bits mentioned in this patch for this register match those in th Marvell PHY driver, and it is located at the same address, the meaning of other register bits varies between the PHYs. Therefore, I do not feel that it would be appropriate to make this some kind of generic function. ==================== Signed-off-by:
-
Russell King authored
Read the PHY-specific status register for the current operating mode (speed and duplex) of the PHY. This register reflects the actual mode that the PHY has resolved depending on either the advertisements of autoneg is enabled, or the forced mode if autoneg is disabled. This ensures that phylib's software state always tracks the hardware state. It seems both AR8033 (which uses the AR8031 ID) and AR8035 support this status register. AR8030 is not known at the present time. This patch depends on "net: phy: extract pause mode" and "net: phy: extract link partner advertisement reading". Reported-by:
tinywrkb <tinywrkb@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Tested-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
