- 20 Jul, 2021 40 commits
-
-
David S. Miller authored
Alex Elder says: ==================== arm64: dts: qcom: DTS updates This series updates some IPA-related DT nodes. Newer versions of IPA do not require an interconnect between IPA and SoC internal memory. The first patch updates the DT binding to reflect this. The second patch adds IPA information to "sc7280.dtsi", using only two interconnects. It includes the definition of the reserved memory area used to hold IPA firmware. The last patch defines the reserved IPA firmware memory area in "sc7180.dtsi". ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Alex Elder authored
Define the reserved memory space used for IPA firmware for the Qualcomm SC7180 SoC. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Alex Elder authored
Add IPA-related nodes and definitions to "sc7280.dtsi", including the reserved memory area used for AP-based IPA firmware loading. Signed-off-by:
-
Alex Elder authored
On some newer SoCs, the interconnect between IPA and SoC internal memory (imem) is not used. Reflect this in the binding by moving the definition of the "imem" interconnect to the end and defining minItems to be 2 for both the interconnects and interconnect-names properties. Signed-off-by:
-
Alex Elder authored
Currently three interconnects are defined for the Qualcomm SC7280 SoC, but this was based on a misunderstanding. There should only be two interconnects defined: one between the IPA and system memory; and another between the AP and IPA config space. The bandwidths defined for the memory and config interconnects do not match what I understand to be proper values, so update these. Signed-off-by:
-
Fabio Estevam authored
The following warning is observed when running 'make dtbs_check': Documentation/devicetree/bindings/net/fsl,fec.yaml:85:7: [warning] wrong indentation: expected 8 but found 6 (indentation) Fix the indentation accordingly. Signed-off-by:
Fabio Estevam <festevam@gmail.com> Reviewed-by:
Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== Fan out FDB entries pointing towards the bridge to all switchdev member ports The "DSA RX filtering" series has added some important support for interpreting addresses towards the bridge device as host addresses and installing them as FDB entries towards the CPU port, but it does not cover all circumstances and needs further work. To be precise, the mechanism introduced in that series only works as long as the ports are fairly static and no port joins or leaves the bridge once the configuration is done. If any port leaves, host FDB entries that were installed during runtime (for example the user changes the MAC address of the bridge device) will be prematurely deleted, resulting in a broken setup. I see this work as targeted for "net-next" because technically it was not supposed to work. Also, there are still corner cases and holes to be plugged. For example, today, FDB entries on foreign interfaces are not covered by br_fdb_replay(), which means that there are cases where some host addresses are either lost, or never deleted by DSA. That will be resolved once more work gets accepted, in particular the "Allow forwarding for the software bridge data path to be offloaded to capable devices" series, which moves the br_fdb_replay() call to the bridge core and therefore would be required to solve the problem in a generic way for every switchdev driver and not just for DSA. These patches also pave the way for a cleaner implementation for FDB entries pointing towards a LAG upper interface in DSA (that code needs only to be added, nothing changed), however this is not done here. ==================== Signed-off-by: -
Vladimir Oltean authored
Using the new fan-out helper for FDB entries installed on the software bridge, we can install host addresses with the proper refcount on the CPU port, such that this case: ip link set swp0 master br0 ip link set swp1 master br0 ip link set swp2 master br0 ip link set swp3 master br0 ip link set br0 address 00:01:02:03:04:05 ip link set swp3 nomaster works properly and the br0 address remains installed as a host entry with refcount 3 instead of getting deleted. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
Currently DSA has an issue with FDB entries pointing towards the bridge in the presence of br_fdb_replay() being called at port join and leave time. In particular, each bridge port will ask for a replay for the FDB entries pointing towards the bridge when it joins, and for another replay when it leaves. This means that for example, a bridge with 4 switch ports will notify DSA 4 times of the bridge MAC address. But if the MAC address of the bridge changes during the normal runtime of the system, the bridge notifies switchdev [ once ] of the deletion of the old MAC address as a local FDB towards the bridge, and of the insertion [ again once ] of the new MAC address as a local FDB. This is a problem, because DSA keeps the old MAC address as a host FDB entry with refcount 4 (4 ports asked for it using br_fdb_replay). So the old MAC address will not be deleted. Additionally, the new MAC address will only be installed with refcount 1, and when the first switch port leaves the bridge (leaving 3 others as still members), it will delete with it the new MAC address of the bridge from the local FDB entries kept by DSA (because the br_fdb_replay call on deletion will bring the entry's refcount from 1 to 0). So the problem, really, is that the number of br_fdb_replay() calls is not matched with the refcount that a host FDB is offloaded to DSA during normal runtime. An elegant way to solve the problem would be to make the switchdev notification emitted by br_fdb_change_mac_address() result in a host FDB kept by DSA which has a refcount exactly equal to the number of ports under that bridge. Then, no matter how many DSA ports join or leave that bridge, the host FDB entry will always be deleted when there are exactly zero remaining DSA switch ports members of the bridge. To implement the proposed solution, we remember that the switchdev objects and port attributes have some helpers provided by switchdev, which can be optionally called by drivers: switchdev_handle_port_obj_{add,del} and switchdev_handle_port_attr_set. These helpers: - fan out a switchdev object/attribute emitted for the bridge towards all the lower interfaces that pass the check_cb(). - fan out a switchdev object/attribute emitted for a bridge port that is a LAG towards all the lower interfaces that pass the check_cb(). In other words, this is the model we need for the FDB events too: something that will keep an FDB entry emitted towards a physical port as it is, but translate an FDB entry emitted towards the bridge into N FDB entries, one per physical port. Of course, there are many differences between fanning out a switchdev object (VLAN) on 3 lower interfaces of a LAG and fanning out an FDB entry on 3 lower interfaces of a LAG. Intuitively, an FDB entry towards a LAG should be treated specially, because FDB entries are unicast, we can't just install the same address towards 3 destinations. It is imaginable that drivers might want to treat this case specifically, so create some methods for this case and do not recurse into the LAG lower ports, just the bridge ports. DSA also listens for FDB entries on "foreign" interfaces, aka interfaces bridged with us which are not part of our hardware domain: think an Ethernet switch bridged with a Wi-Fi AP. For those addresses, DSA installs host FDB entries. However, there we have the same problem (those host FDB entries are installed with a refcount of only 1) and an even bigger one which we did not have with FDB entries towards the bridge: br_fdb_replay() is currently not called for FDB entries on foreign interfaces, just for the physical port and for the bridge itself. So when DSA sniffs an address learned by the software bridge towards a foreign interface like an e1000 port, and then that e1000 leaves the bridge, DSA remains with the dangling host FDB address. That will be fixed separately by replaying all FDB entries and not just the ones towards the port and the bridge. Signed-off-by: -
Vladimir Oltean authored
It is a bit difficult to understand what DSA checks when it tries to avoid installing dynamically learned addresses on foreign interfaces as local host addresses, so create a generic switchdev helper that can be reused and is generally more readable. Signed-off-by:
-
Xu Liang authored
Add driver to support the Maxlinear GPY115, GPY211, GPY212, GPY215, GPY241, GPY245 PHYs. Separate from XWAY PHY driver because this series has different register layout and new features not supported in XWAY PHY. Signed-off-by:
Xu Liang <lxu@maxlinear.com> Acked-by:
Hauke Mehrtens <hmehrtens@maxlinear.com> Tested-by:
Wong Vee Khee <vee.khee.wong@linux.intel.com> Tested-by:
-
Xu Liang authored
Add API to read 802.3-c45 IDs so that C22/C45 mixed device can use C45 APIs without failing ID checks. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
Vladimir Olteans says: ==================== Proper cross-chip support for tag_8021q The cross-chip bridging support for tag_8021q/sja1105 introduced here: https://patchwork.ozlabs.org/project/netdev/cover/20200510163743.18032-1-olteanv@gmail.com/ took some shortcuts and is not reusable in other topologies except for the one it was written for: disjoint DSA trees. A diagram of this topology can be seen here: https://patchwork.ozlabs.org/project/netdev/patch/20200510163743.18032-3-olteanv@gmail.com/ However there are sja1105 switches on other boards using other topologies, most notably: - Daisy chained: | sw0p0 sw0p1 sw0p2 sw0p3 sw0p4 [ user ] [ user ] [ user ] [ dsa ] [ cpu ] | +---------+ | sw1p0 sw1p1 sw1p2 sw1p3 sw1p4 [ user ] [ user ] [ user ] [ dsa ] [ dsa ] | +---------+ | sw2p0 sw2p1 sw2p2 sw2p3 sw2p4 [ user ] [ user ] [ user ] [ user ] [ dsa ] - "H" topology: eth0 eth1 | | CPU port CPU port | DSA link | sw0p0 sw0p1 sw0p2 sw0p3 sw0p4 -------- sw1p4 sw1p3 sw1p2 sw1p1 sw1p0 | | | | | | user user user user user user port port port port port port In fact, the current code for tag_8021q cross-chip links works for neither of these 2 classes of topologies. The main reasons are: (a) The sja1105 driver does not treat DSA links. In the "disjoint trees" topology, the routing port towards any other switch is also the CPU port, and that was already configured so it already worked. This series does not deal with enabling DSA links in the sja1105 driver, that is a fairly trivial task that will be dealt with separately. (b) The tag_8021q code for cross-chip links assumes that any 2 switches between cross-chip forwarding needs to be enabled (i.e. which have user ports part of the same bridge) are at most 1 hop away from each other. This was true for the "disjoint trees" case because once a packet reached the CPU port, VLAN-unaware bridging was done by the DSA master towards the other switches based on destination MAC address, so the tag_8021q header was not interpreted in any way. However, in a daisy chain setup with 3 switches, all of them will interpret the tag_8021q header, and all tag_8021q VLANs need to be installed in all switches. When looking at the O(n^2) real complexity of the problem, it is clear that the current code had absolutely no chance of working in the general case. So this patch series brings a redesign of tag_8021q, in light of its new requirements. Anything with O(n^2) complexity (where n is the number of switches in a DSA tree) is an obvious candidate for the DSA cross-chip notifier support. One by one, the patches are: - The sja1105 driver is extremely entangled with tag_8021q, to be exact, with that driver's best_effort_vlan_filtering support. We drop this operating mode, which means that sja1105 temporarily loses network stack termination for VLAN-aware bridges. That operating mode raced itself to its own grave anyway due to some hardware limitations in combination with PTP reported by NXP customers. I can't say a lot more, but network stack termination for VLAN-aware bridges in sja1105 will be reimplemented soon with a much, much better solution. - What remains of tag_8021q in sja1105 is support for standalone ports mode and for VLAN-unaware bridging. We refactor the API surface of tag_8021q to a single pair of dsa_tag_8021q_{register,unregister} functions and we clean up everything else related to tag_8021q from sja1105 and felix. - Then we move tag_8021q into the DSA core. I thought about this a lot, and there is really no other way to add a DSA_NOTIFIER_TAG_8021Q_VLAN_ADD cross-chip notifier if DSA has no way to know if the individual switches use tag_8021q or not. So it needs to be part of the core to use notifiers. - Then we modify tag_8021q to update dynamically on bridge_{join,leave} events, instead of what we have today which is simply installing the VLANs on all ports of a switch and leaving port isolation up to somebody else. This change is necessary because port isolation over a DSA link cannot be done in any other way except based on VLAN membership, as opposed to bridging within the same switch which had 2 choices (at least on sja1105). - Finally we add 2 new cross-chip notifiers for adding and deleting a tag_8021q VLAN, which is properly refcounted similar to the bridge FDB and MDB code, and complete cleanup is done on teardown (note that this is unlike regular bridge VLANs, where we currently cannot do refcounting because the user can run "bridge vlan add dev swp0 vid 100" a gazillion times, and "bridge vlan del dev swp0 vid 100" just once, and for some reason expect that the VLAN will be deleted. But I digress). With this opportunity we remove a lot of hard-to-digest code and replace it with much more idiomatic DSA-style code. This series was regression-tested on: - Single-switch boards with SJA1105T - Disjoint-tree boards with SJA1105S and Felix (using ocelot-8021q) - H topology boards using SJA1110A ==================== Signed-off-by:
-
Vladimir Oltean authored
The big problem which mandates cross-chip notifiers for tag_8021q is this: | sw0p0 sw0p1 sw0p2 sw0p3 sw0p4 [ user ] [ user ] [ user ] [ dsa ] [ cpu ] | +---------+ | sw1p0 sw1p1 sw1p2 sw1p3 sw1p4 [ user ] [ user ] [ user ] [ dsa ] [ dsa ] | +---------+ | sw2p0 sw2p1 sw2p2 sw2p3 sw2p4 [ user ] [ user ] [ user ] [ dsa ] [ dsa ] When the user runs: ip link add br0 type bridge ip link set sw0p0 master br0 ip link set sw2p0 master br0 It doesn't work. This is because dsa_8021q_crosschip_bridge_join() assumes that "ds" and "other_ds" are at most 1 hop away from each other, so it is sufficient to add the RX VLAN of {ds, port} into {other_ds, other_port} and vice versa and presto, the cross-chip link works. When there is another switch in the middle, such as in this case switch 1 with its DSA links sw1p3 and sw1p4, somebody needs to tell it about these VLANs too. Which is exactly why the problem is quadratic: when a port joins a bridge, for each port in the tree that's already in that same bridge we notify a tag_8021q VLAN addition of that port's RX VLAN to the entire tree. It is a very complicated web of VLANs. It must be mentioned that currently we install tag_8021q VLANs on too many ports (DSA links - to be precise, on all of them). For example, when sw2p0 joins br0, and assuming sw1p0 was part of br0 too, we add the RX VLAN of sw2p0 on the DSA links of switch 0 too, even though there isn't any port of switch 0 that is a member of br0 (at least yet). In theory we could notify only the switches which sit in between the port joining the bridge and the port reacting to that bridge_join event. But in practice that is impossible, because of the way 'link' properties are described in the device tree. The DSA bindings require DT writers to list out not only the real/physical DSA links, but in fact the entire routing table, like for example switch 0 above will have: sw0p3: port@3 { link = <&sw1p4 &sw2p4>; }; This was done because: /* TODO: ideally DSA ports would have a single dp->link_dp member, * and no dst->rtable nor this struct dsa_link would be needed, * but this would require some more complex tree walking, * so keep it stupid at the moment and list them all. */ but it is a perfect example of a situation where too much information is actively detrimential, because we are now in the position where we cannot distinguish a real DSA link from one that is put there to avoid the 'complex tree walking'. And because DT is ABI, there is not much we can change. And because we do not know which DSA links are real and which ones aren't, we can't really know if DSA switch A is in the data path between switches B and C, in the general case. So this is why tag_8021q RX VLANs are added on all DSA links, and probably why it will never change. On the other hand, at least the number of additions/deletions is well balanced, and this means that once we implement reference counting at the cross-chip notifier level a la fdb/mdb, there is absolutely zero need for a struct dsa_8021q_crosschip_link, it's all self-managing. In fact, with the tag_8021q notifiers emitted from the bridge join notifiers, it becomes so generic that sja1105 does not need to do anything anymore, we can just delete its implementation of the .crosschip_bridge_{join,leave} methods. Among other things we can simply delete is the home-grown implementation of sja1105_notify_crosschip_switches(). The reason why that is wrong is because it is not quadratic - it only covers remote switches to which we have a cross-chip bridging link and that does not cover in-between switches. This deletion is part of the same patch because sja1105 used to poke deep inside the guts of the tag_8021q context in order to do that. Because the cross-chip links went away, so needs the sja1105 code. Last but not least, dsa_8021q_setup_port() is simplified (and also renamed). Because our TAG_8021Q_VLAN_ADD notifier is designed to react on the CPU port too, the four dsa_8021q_vid_apply() calls: - 1 for RX VLAN on user port - 1 for the user port's RX VLAN on the CPU port - 1 for TX VLAN on user port - 1 for the user port's TX VLAN on the CPU port now get squashed into only 2 notifier calls via dsa_port_tag_8021q_vlan_add. And because the notifiers to add and to delete a tag_8021q VLAN are distinct, now we finally break up the port setup and teardown into separate functions instead of relying on a "bool enabled" flag which tells us what to do. Arguably it should have been this way from the get go. Signed-off-by: -
Vladimir Oltean authored
There has been at least one wasted opportunity for tag_8021q to be used by a driver: https://patchwork.ozlabs.org/project/netdev/patch/20200710113611.3398-3-kurt@linutronix.de/#2484272 because of a design decision: the declared purpose of tag_8021q is to offer source port/switch identification for a tagging driver for packets coming from a switch with no hardware DSA tagging support. It is not intended to provide VLAN-based port isolation, because its first user, sja1105, had another mechanism for bridging domain isolation, the L2 Forwarding Table. So even if 2 ports are in the same VLAN but they are separated via the L2 Forwarding Table, they will not communicate with one another. The L2 Forwarding Table is managed by the sja1105_bridge_join() and sja1105_bridge_leave() methods. As a consequence, today tag_8021q does not bother too much with hooking into .port_bridge_join() and .port_bridge_leave() because that would introduce yet another degree of freedom, it just iterates statically through all ports of a switch and adds the RX VLAN of one port to all the others. In this way, whenever .port_bridge_join() is called, bridging will magically work because the RX VLANs are already installed everywhere they need to be. This is not to say that the reason for the change in this patch is to satisfy the hellcreek and similar use cases, that is merely a nice side effect. Instead it is to make sja1105 cross-chip links work properly over a DSA link. For context, sja1105 today supports a degenerate form of cross-chip bridging, where the switches are interconnected through their CPU ports ("disjoint trees" topology). There is some code which has been generalized into dsa_8021q_crosschip_link_{add,del}, but it is not enough, and frankly it is impossible to build upon that. Real multi-switch DSA trees, like daisy chains or H trees, which have actual DSA links, do not work. The problem is that sja1105 is unlike mv88e6xxx, and does not have a PVT for cross-chip bridging, which is a table by which the local switch can select the forwarding domain for packets from a certain ingress switch ID and source port. The sja1105 switches cannot parse their own DSA tags, because, well, they don't really have support for DSA tags, it's all VLANs. So to make something like cross-chip bridging between sw0p0 and sw1p0 to work over the sw0p3/sw1p3 DSA link to work with sja1105 in the topology below: | | sw0p0 sw0p1 sw0p2 sw0p3 sw1p3 sw1p2 sw1p1 sw1p0 [ user ] [ user ] [ cpu ] [ dsa ] ---- [ dsa ] [ cpu ] [ user ] [ user ] we need to ask ourselves 2 questions: (1) how should the L2 Forwarding Table be managed? (2) how should the VLAN Lookup Table be managed? i.e. what should prevent packets from going to unwanted ports? Since as mentioned, there is no PVT, the L2 Forwarding Table only contains forwarding rules for local ports. So we can say "all user ports are allowed to forward to all CPU ports and all DSA links". If we allow forwarding to DSA links unconditionally, this means we must prevent forwarding using the VLAN Lookup Table. This is in fact asymmetric with what we do for tag_8021q on ports local to the same switch, and it matters because now that we are making tag_8021q a core DSA feature, we need to hook into .crosschip_bridge_join() to add/remove the tag_8021q VLANs. So for symmetry it makes sense to manage the VLANs for local forwarding in the same way as cross-chip forwarding. Note that there is a very precise reason why tag_8021q hooks into dsa_switch_bridge_join() which acts at the cross-chip notifier level, and not at a higher level such as dsa_port_bridge_join(). We need to install the RX VLAN of the newly joining port into the VLAN table of all the existing ports across the tree that are part of the same bridge, and the notifier already does the iteration through the switches for us. Signed-off-by:
-
Vladimir Oltean authored
Right now, setting up tag_8021q is a 2-step operation for a driver, first the context structure needs to be created, then the VLANs need to be installed on the ports. A similar thing is true for teardown. Merge the 2 steps into the register/unregister methods, to be as transparent as possible for the driver as to what tag_8021q does behind the scenes. This also gets rid of the funny "bool setup == true means setup, == false means teardown" API that tag_8021q used to expose. Note that dsa_tag_8021q_register() must be called at least in the .setup() driver method and never earlier (like in the driver probe function). This is because the DSA switch tree is not initialized at probe time, and the cross-chip notifiers will not work. For symmetry with .setup(), the unregister method should be put in .teardown(). Signed-off-by:
-
Vladimir Oltean authored
Make tag_8021q a more central element of DSA and move the 2 driver specific operations outside of struct dsa_8021q_context (which is supposed to hold dynamic data and not really constant function pointers). Signed-off-by:
-
Vladimir Oltean authored
The basic problem description is as follows: Be there 3 switches in a daisy chain topology: | sw0p0 sw0p1 sw0p2 sw0p3 sw0p4 [ user ] [ user ] [ user ] [ dsa ] [ cpu ] | +---------+ | sw1p0 sw1p1 sw1p2 sw1p3 sw1p4 [ user ] [ user ] [ user ] [ dsa ] [ dsa ] | +---------+ | sw2p0 sw2p1 sw2p2 sw2p3 sw2p4 [ user ] [ user ] [ user ] [ user ] [ dsa ] The CPU will not be able to ping through the user ports of the bottom-most switch (like for example sw2p0), simply because tag_8021q was not coded up for this scenario - it has always assumed DSA switch trees with a single switch. To add support for the topology above, we must admit that the RX VLAN of sw2p0 must be added on some ports of switches 0 and 1 as well. This is in fact a textbook example of thing that can use the cross-chip notifier framework that DSA has set up in switch.c. There is only one problem: core DSA (switch.c) is not able right now to make the connection between a struct dsa_switch *ds and a struct dsa_8021q_context *ctx. Right now, it is drivers who call into tag_8021q.c and always provide a struct dsa_8021q_context *ctx pointer, and tag_8021q.c calls them back with the .tag_8021q_vlan_{add,del} methods. But with cross-chip notifiers, it is possible for tag_8021q to call drivers without drivers having ever asked for anything. A good example is right above: when sw2p0 wants to set itself up for tag_8021q, the .tag_8021q_vlan_add method needs to be called for switches 1 and 0, so that they transport sw2p0's VLANs towards the CPU without dropping them. So instead of letting drivers manage the tag_8021q context, add a tag_8021q_ctx pointer inside of struct dsa_switch, which will be populated when dsa_tag_8021q_register() returns success. The patch is fairly long-winded because we are partly reverting commit 5899ee36 ("net: dsa: tag_8021q: add a context structure") which made the driver-facing tag_8021q API use "ctx" instead of "ds". Now that we can access "ctx" directly from "ds", this is no longer needed. Signed-off-by: -
Vladimir Oltean authored
Upcoming patches will add tag_8021q related logic to switch.c and port.c, in order to allow it to make use of cross-chip notifiers. In addition, a struct dsa_8021q_context *ctx pointer will be added to struct dsa_switch. It seems fairly low-reward to #ifdef the *ctx from struct dsa_switch and to provide shim implementations of the entire tag_8021q.c calling surface (not even clear what to do about the tag_8021q cross-chip notifiers to avoid compiling them). The runtime overhead for switches which don't use tag_8021q is fairly small because all helpers will check for ds->tag_8021q_ctx being a NULL pointer and stop there. So let's make it part of dsa_core.o. Signed-off-by:
-
Vladimir Oltean authored
In preparation of moving tag_8021q to core DSA, move all initialization and teardown related to tag_8021q which is currently done by drivers in 2 functions called "register" and "unregister". These will gather more functionality in future patches, which will better justify the chosen naming scheme. Signed-off-by:
-
Vladimir Oltean authored
This is no longer necessary since tag_8021q doesn't register itself as a full-blown tagger anymore. Signed-off-by:
-
Vladimir Oltean authored
Use %pe to give the user a string holding the error code instead of just a number. Signed-off-by:
-
Vladimir Oltean authored
Some of the tag_8021q code has been taken out of sja1105, which uses "rc" for its return code variables, whereas the DSA core uses "err". Change tag_8021q for consistency. Signed-off-by:
-
Vladimir Oltean authored
Simply put, the best-effort VLAN filtering mode relied on VLAN retagging from a bridge VLAN towards a tag_8021q sub-VLAN in order to be able to decode the source port in the tagger, but the VLAN retagging implementation inside the sja1105 chips is not the best and we were relying on marginal operating conditions. The most notable limitation of the best-effort VLAN filtering mode is its incapacity to treat this case properly: ip link add br0 type bridge vlan_filtering 1 ip link set swp2 master br0 ip link set swp4 master br0 bridge vlan del dev swp4 vid 1 bridge vlan add dev swp4 vid 1 pvid When sending an untagged packet through swp2, the expectation is for it to be forwarded to swp4 as egress-tagged (so it will contain VLAN ID 1 on egress). But the switch will send it as egress-untagged. There was an attempt to fix this here: https://patchwork.kernel.org/project/netdevbpf/patch/20210407201452.1703261-2-olteanv@gmail.com/ but it failed miserably because it broke PTP RX timestamping, in a way that cannot be corrected due to hardware issues related to VLAN retagging. So with either PTP broken or pushing VLAN headers on egress for untagged packets being broken, the sad reality is that the best-effort VLAN filtering code is broken. Delete it. Note that this means there will be a temporary loss of functionality in this driver until it is replaced with something better (network stack RX/TX capability for "mode 2" as described in Documentation/networking/dsa/sja1105.rst, the "port under VLAN-aware bridge" case). We simply cannot keep this code until that driver rework is done, it is super bloated and tangled with tag_8021q. Signed-off-by:
-
David S. Miller authored
Julian Wiedmann says: ==================== s390/qeth: updates 2021-07-20 please apply the following patch series for qeth to netdev's net-next tree. This removes the deprecated support for OSN-mode devices, and does some follow-on cleanups. ==================== Signed-off-by: -
David S. Miller authored
Paolo Abeni says: ==================== veth: more flexible channels number configuration XDP setups can benefit from multiple veth RX/TX queues. Currently veth allow setting such number only at creation time via the 'numrxqueues' and 'numtxqueues' parameters. This series introduces support for the ethtool set_channel operation and allows configuring the queue number via a new module parameter. The veth default configuration is not changed. Finally self-tests are updated to check the new features, with both valid and invalid arguments. This iteration is a rebase of the most recent RFC, it does not provide a module parameter to configure the default number of queues, but I think could be worthy RFC v1 -> RFC v2: - report more consistent 'combined' count - make set_channel as resilient as possible to errors - drop module parameter - but I would still consider it. - more self-tests ==================== Signed-off-by: -
David S. Miller authored
Nikolay Aleksandrov says: ==================== net: bridge: multicast: add vlan support This patchset adds initial per-vlan multicast support, most of the code deals with moving to multicast context pointers from bridge/port pointers. That allows us to switch them with the per-vlan contexts when a multicast packet is being processed and vlan multicast snooping has been enabled. That is controlled by a global bridge option added in patch 06 which is off by default (BR_BOOLOPT_MCAST_VLAN_SNOOPING). It is important to note that this option can change only under RTNL and doesn't require multicast_lock, so we need to be careful when retrieving mcast contexts in parallel. For packet processing they are switched only once in br_multicast_rcv() and then used until the packet has been processed. For the most part we need these contexts only to read config values and check if they are disabled. The global mcast state which is maintained consists of querier and router timers, the rest are config options. The port mcast state which is maintained consists of query timer and link to router port list if it's ever marked as a router port. Port multicast contexts _must_ be used only with their respective global contexts, that is a bridge port's mcast context must be used only with bridge's global mcast context and a vlan/port's mcast context must be used only with that vlan's global mcast context due to the router port lists. This way a bridge port can be marked as a router in multiple vlans, but might not be a router in some other vlan. Also this allows us to have per-vlan querier elections, per-vlan queries and basically the whole multicast state becomes per-vlan when the option is enabled. One of the hardest parts is synchronization with vlan's memory management, that is done through a new vlan flag: BR_VLFLAG_MCAST_ENABLED which is changed only under multicast_lock. When a vlan is being destroyed first that flag is removed under the lock, then the multicast context is torn down which includes waiting for any outstanding context timers. Since all of the vlan processing depends on BR_VLFLAG_MCAST_ENABLED it must be checked first if the contexts are vlan and the multicast_lock has been acquired. That is done by all IGMP/MLD packet processing functions and timers. When processing a packet we have RCU so the vlan memory won't be freed, but if the flag is missing we must not process it. The timers are synchronized in the same way with the addition of waiting for them to finish in case they are running after removing the flag under multicast_lock (i.e. they were waiting for the lock). Multicast vlan snooping requires vlan filtering to be enabled, if it's disabled then snooping gets automatically disabled, too. BR_VLFLAG_GLOBAL_MCAST_ENABLED controls if a vlan has BR_VLFLAG_MCAST_ENABLED set which is used in all vlan disabled checks. We need both flags because one is controlled by user-space globally (BR_VLFLAG_GLOBAL_MCAST_ENABLED) and the other is for a particular bridge/vlan or port/vlan entry (BR_VLFLAG_MCAST_ENABLED). Since the latter is also used for synchronization between the multicast and vlan code, and also controlled by BR_VLFLAG_GLOBAL_MCAST_ENABLED we rely on it when checking if a vlan context is disabled. The multicast fast-path has 3 new bit tests on the cache-hot bridge flags field, I didn't observe any measurable difference. I haven't forced either context options to be always disabled when the other type is enabled because the state consists of timers which either expire (router) or don't affect the normal operation. Some options, like the mcast querier one, won't be allowed to change for the disabled context type, that will come with a future patch-set which adds per-vlan querier control. Another important addition is the global vlan options, so far we had only per bridge/port vlan options but in order to control vlan multicast snooping globally we need to add a new type of global vlan options. They can be changed only on the bridge device and are dumped only when a special flag is set in the dump request. The first global option is vlan mcast snooping control, it controls the vlan BR_VLFLAG_GLOBAL_MCAST_ENABLED private flag. It can be set only on master vlan entries. There will be many more global vlan options in the future both for multicast config and other per-vlan options (e.g. STP). There's a lot of room for improvements, I'll do some of the initial ones but splitting the state to different contexts opens the door for a lot more. Also any new multicast options become vlan-supported with very little to no effort by using the same contexts. Short patch description: patches 01-04: initial mcast context add, no functional changes patch 05: adds vlan mcast init and control helpers and uses them on vlan create/destroy patch 06: adds a global bridge mcast vlan snooping knob (default off) patches 07-08: add a helper for users which must derive the contexts based on current bridge and vlan options (e.g. timers) patch 09: adds checks for disabled vlan contexts in packet processing and timers patch 10: adds support for per-vlan querier and tagged queries patch 11: adds router port vlan id in the notifications patches 12-14: add global vlan options support (change, dump, notify) patch 15: adds per-vlan global mcast snooping control Future patch-sets which build on this one (in order): - vlan state mcast handling - user-space mdb contexts (currently only the bridge contexts are used there) - all bridge multicast config options added per-vlan global and per vlan/port - iproute2 support for all the new uAPIs - selftests This set has been stress-tested (deleting/adding ports/vlans while changing vlan mcast snooping while processing IGMP/MLD packets), and also has passed all bridge self-tests. I'm sending this set as early as possible since there're a few more related sets that should go in the same release to get proper and full mcast vlan snooping support. ==================== Signed-off-by: -
Julian Wiedmann authored
qeth uses three device_type structs - a generic one, and one for each sub-driver (which is used for fixed-layer devices only). Instead of exporting these device_types back&forth between the driver's modules, make all the logic self-contained within the sub-drivers. On disc->setup() they either install their own device_type, or add the sysfs attributes that are missing in the generic device_type. Later on disc->remove() these attributes are removed again from any device that has the generic device_type. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
The QETH_PROT_* naming is shared among two unrelated areas - one is the MPC-level protocol identifiers, the other is the qeth_prot_version enum. Rename the MPC definitions to use QETH_MPC_PROT_*. Signed-off-by:
Alexandra Winter <wintera@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
Commit fb64de1b ("s390/qeth: phase out OSN support") spelled out why the OSN support in qeth is in a bad shape, and put any remaining interested parties on notice to speak up before it gets ripped out. It's 2021 now, so make true on that promise and remove all the OSN-specific parts from qeth. This also means that we no longer need to export various parts of the cmd & data path internals to the L2 driver. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueDavid S. Miller authored
Tony Nguyen says: ==================== 40GbE Intel Wired LAN Driver Updates 2021-07-19 This series contains updates to iavf and i40e drivers. Stefan Assmann adds locking to a path that does not acquire a spinlock where needed for i40e. He also adjusts locking of critical sections to help avoid races and removes overriding of the adapter state during pending reset for iavf driver. ==================== Signed-off-by: -
David S. Miller authored
Paolo Abeni says: ==================== veth: more flexible channels number configuration XDP setups can benefit from multiple veth RX/TX queues. Currently veth allow setting such number only at creation time via the 'numrxqueues' and 'numtxqueues' parameters. This series introduces support for the ethtool set_channel operation and allows configuring the queue number via a new module parameter. The veth default configuration is not changed. Finally self-tests are updated to check the new features, with both valid and invalid arguments. This iteration is a rebase of the most recent RFC, it does not provide a module parameter to configure the default number of queues, but I think could be worthy RFC v1 -> RFC v2: - report more consistent 'combined' count - make set_channel as resilient as possible to errors - drop module parameter - but I would still consider it. - more self-tests ==================== Signed-off-by: -
Paolo Abeni authored
Simple functional test for the newly exposed features. Also add an optional stress test for the channel number update under flood. RFC v1 -> RFC v2: - add the stress test Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Paolo Abeni authored
This allows easier XDP usage. The number of default active queues is not changed: 1 RX and 1 TX so that this does not introduce overhead on the datapath for queue selection. v1 -> v2: - drop the module parameter, force default to nr_possible_cpus - Toke Signed-off-by:
-
Paolo Abeni authored
This change implements the set_channel() ethtool operation, preserving the current defaults values and allowing up set the number of queues in the range set ad device creation time. The update operation tries hard to leave the device in a consistent status in case of errors. RFC v1 -> RFC v2: - don't flip device status on set_channel() - roll-back the changes if possible on error - Jackub Signed-off-by:
-
Paolo Abeni authored
Extract in simpler helpers the code to enable and disable a range of xdp/napi instance, with the common property that "disable" helpers can't fail. Will be used by the next patch. No functional change intended. Signed-off-by:
-
Paolo Abeni authored
veth get_channel currently reports for channels being both RX/TX and combined. As Jakub noted: """ ethtool man page is relatively clear, unfortunately the kernel code is not and few read the man page. A channel is approximately an IRQ, not a queue, and IRQ can't be dedicated and combined simultaneously """ This patch changes the information exposed by veth_get_channels, setting max_combined to zero, being more consistent with the above statement. The ethtool_channels is always cleared by the caller, we just need to avoid setting the 'combined' fields. Signed-off-by:
-
Vasily Averin authored
unix sockets allows to send file descriptors via SCM_RIGHTS type messages. Each such send call forces kernel to allocate up to 2Kb memory for struct scm_fp_list. It makes sense to account for them to restrict the host's memory consumption from inside the memcg-limited container. Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Signed-off-by:
-
Vasily Averin authored
Author: Andrey Ryabinin <aryabinin@virtuozzo.com> The size of the ip_tunnel_prl structs allocation is controllable from user-space, thus it's better to avoid spam in dmesg if allocation failed. Also add __GFP_ACCOUNT as this is a good candidate for per-memcg accounting. Allocation is temporary and limited by 4GB. Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by:
-
Vasily Averin authored
vlan array consume up to 8 pages of memory per net device. It makes sense to account for them to restrict the host's memory consumption from inside the memcg-limited container. Signed-off-by:
-
