- 06 Dec, 2013 16 commits
-
-
Kamil Krawczyk authored
The diagnostics test needs some slightly different limits in order to succeed. Change-Id: Ia1c49148af92fa4be20778a819f69350381bf865 Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Shannon Nelson authored
Allow debugfs to trigger a reset called EMPR. Change-Id: I2f6600a8242759ec60c8198d03f70c2b774e0740 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Shannon Nelson authored
Add a quick ethtool test for interrupts using the SW interrupt. Also, change the loopback test (for now) to not report failure. Change-Id: Id8ef154b82475e3163087a8d1df01dfec4d529fc Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Shannon Nelson authored
Set the debug mask by default. Change-Id: I10346ccb1a47f79747eb2108a83af059e947f1e2 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mitch Williams authored
Clean up some messages that had arguments reversed. Change-Id: I0f38a4f01132a2918d61dbaf23de1e1eaed5e56d Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mitch Williams authored
The code that added new MAC addresses from the VFs did not, in fact, work. Due to inverse logic, the only addresses that could be added were addresses that already had been added. Change-Id: Idce9169bd2f36e2c5ee10b130587a65705465d31 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Shannon Nelson authored
If the admin queue times out, retry some more to make driver load and reset more robust. Change-Id: I45c977b3d10a62c770d6072659ec27834849ca33 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Shannon Nelson authored
The indication for telling which reset happened is a value, not a bit pattern, so select by ==, not &. Change-Id: Ie04097388ff16b85015d6ab1236d7511ef653e8c Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mitch Williams authored
The number of vectors per VF as reported by the hardware does not include vector 0, so we need to account for this when checking to see if the VF is configuring a valid vector. Change-Id: I051d8bebae8f4722239f5a3fa5e1de4cf0f4e817 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Anjali Singhai jain authored
The version bits reported by the hardware changed, so fix up the offsets to print the version correctly. Change-Id: I8a8207b401ea88f6da024aebafe7d3826ee6512c Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Shannon Nelson authored
Use more virtual registers to simplify code flows. Change-Id: I32cff3818c5ca3a3792487ba4fed8f1d0ea6145a Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Shannon Nelson authored
During admin queue shutdown clear some more registers explicitly. Change-Id: Ifb235c691e1c55e76bf66e0642207f464153d05a Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Anjali Singhai jain authored
Hardware definitions changed slightly so sync up the defines file with the updated state of the hardware. Change-Id: I8349d91630a3208df306bd1dc88f028c87be2248 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Christopher Pau authored
pf_id needs to be encoded for cards with ARI enabled, which allows for larger function numbers than 8. Commit-Id: I23fa7df9dabf3878cc08c9b2151729c8539f5f17 Signed-off-by: Christopher Pau <christopher.pau@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Kevin Wallace authored
When running in a network namespace whose only link to the outside world is a macvlan device, not being able to create a macvtap off of it is a real pain. So modify macvtap creation to automatically forward a creation of a macvtap on a macvlan to become a creation of a macvtap on the underlying network device, just like is currently done with macvlan-on-macvlan devices. v2: Use netif_is_macvlan and macvlan_dev_real_dev helpers to make it more clear what we're doing. Signed-off-by: Kevin Wallace <kevin@pentabarf.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-nextDavid S. Miller authored
Ben Hutchings says: ==================== SIOCGHWTSTAMP ioctl 1. Add the SIOCGHWTSTAMP ioctl and update the timestamping documentation. 2. Implement SIOCGHWTSTAMP in most drivers that support SIOCSHWTSTAMP. 3. Add a test program to exercise SIOC{G,S}HWTSTAMP. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 05 Dec, 2013 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessDavid S. Miller authored
John W. Linville says: ==================== Please pull this batch of fixes intende for the 3.13 stream! For the mac80211 bits, Johannes says: "For now I have various fixes all over, mostly for issues introduced in relatively recent patches. There's no real pattern to it. Some of the issues like go back longer, but still seemed 3.13 material." And... "These are just two patches disabling the broken CSA code. Once this goes into your tree I'll merge it into mac80211-next and revert there (since we fixed the bugs there)." For the iwlwifi bits, Emmanuel says: "I have here a few fixes for BT Coex. One of them is a NULL pointer dereference. Another one avoids to enable a feature that can make the firmware unhappy since the firmware isn't ready for it yet. WE also avoid a WARNING that can be triggered upon association in not-so-bad cases even if the association succeeded. We add support for new NICs (not yet on the market) and bump the API so that 3.13 will be able to work with the new firmware that will be out soon hopefully. I also have a boundary check from Johannes." In addition to those... - Arend van Spriel fixes a brcmfmac problem that could use an uninitialized variable in an error path. - Borislav Petkov fixes a Kconfig-based build breakage problem for brcmsmac. - Michal Nazarewicz fixes a couple of NULL pointer dereference problems in ath9k and wcn36xx. - Sujith Manoharan fixes a couple of ath9k problems related to incorrect interpretation of EEPROM configuration data. - Ujjal Roy fixes a memory leak in mwifiex. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
-
- 03 Dec, 2013 7 commits
-
-
David S. Miller authored
Hariprasad Shenai says: ==================== Fixes T5 adapter init, due to incorrect FW version check This patch series fixes, Chelsio T5 adapter initialization failure due to incorrect firmware version check. This patch series modifies the firmware flashing mechanism for T4/T5 adapter. The patch series moves chip type from struct adapter to struct adapter_params. It changes the references of chip type in cxgb4 and cxgb4vf drivers such that build failure is avoided. Patch 3/3 is dependent on patch 1/3 Patch 2/3 is also dependent on patch 1/3 We would like to request this patch series to get merged via David Miller's 'net' tree. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wei Yang authored
When driver registration fails, we need to clean up the resources allocated before. mlx4_core missed destroying the workqueue allocated. This patch destroys the workqueue when registration fails. Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Venkat Venkatsubra authored
After congestion update on a local connection, when rds_ib_xmit returns less bytes than that are there in the message, rds_send_xmit calls back rds_ib_xmit with an offset that causes BUG_ON(off & RDS_FRAG_SIZE) to trigger. For a 4Kb PAGE_SIZE rds_ib_xmit returns min(8240,4096)=4096 when actually the message contains 8240 bytes. rds_send_xmit thinks there is more to send and calls rds_ib_xmit again with a data offset "off" of 4096-48(rds header) =4048 bytes thus hitting the BUG_ON(off & RDS_FRAG_SIZE) [RDS_FRAG_SIZE=4k]. The commit 6094628b "rds: prevent BUG_ON triggering on congestion map updates" introduced this regression. That change was addressing the triggering of a different BUG_ON in rds_send_xmit() on PowerPC architecture with 64Kbytes PAGE_SIZE: BUG_ON(ret != 0 && conn->c_xmit_sg == rm->data.op_nents); This was the sequence it was going through: (rds_ib_xmit) /* Do not send cong updates to IB loopback */ if (conn->c_loopback && rm->m_inc.i_hdr.h_flags & RDS_FLAG_CONG_BITMAP) { rds_cong_map_updated(conn->c_fcong, ~(u64) 0); return sizeof(struct rds_header) + RDS_CONG_MAP_BYTES; } rds_ib_xmit returns 8240 rds_send_xmit: c_xmit_data_off = 0 + 8240 - 48 (rds header accounted only the first time) = 8192 c_xmit_data_off < 65536 (sg->length), so calls rds_ib_xmit again rds_ib_xmit returns 8240 rds_send_xmit: c_xmit_data_off = 8192 + 8240 = 16432, calls rds_ib_xmit again and so on (c_xmit_data_off 24672,32912,41152,49392,57632) rds_ib_xmit returns 8240 On this iteration this sequence causes the BUG_ON in rds_send_xmit: while (ret) { tmp = min_t(int, ret, sg->length - conn->c_xmit_data_off); [tmp = 65536 - 57632 = 7904] conn->c_xmit_data_off += tmp; [c_xmit_data_off = 57632 + 7904 = 65536] ret -= tmp; [ret = 8240 - 7904 = 336] if (conn->c_xmit_data_off == sg->length) { conn->c_xmit_data_off = 0; sg++; conn->c_xmit_sg++; BUG_ON(ret != 0 && conn->c_xmit_sg == rm->data.op_nents); [c_xmit_sg = 1, rm->data.op_nents = 1] What the current fix does: Since the congestion update over loopback is not actually transmitted as a message, all that rds_ib_xmit needs to do is let the caller think the full message has been transmitted and not return partial bytes. It will return 8240 (RDS_CONG_MAP_BYTES+48) when PAGE_SIZE is 4Kb. And 64Kb+48 when page size is 64Kb. Reported-by: Josh Hunt <joshhunt00@gmail.com> Tested-by: Honggang Li <honli@redhat.com> Acked-by: Bang Nguyen <bang.nguyen@oracle.com> Signed-off-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paul Durrant authored
xenvif_start_xmit() relies on checking vif->task for NULL to determine whether the vif is ready to accept packets. The task thread is stopped in xenvif_disconnect() but task is not set to NULL. Thus, on a re-connect the check will give a false positive. Also since commit ea732dff (Handle backend state transitions in a more robust way) it should not be possible for xenvif_connect() to be called if the vif is already connected so change the check of vif->tx_irq to a BUG_ON() and also add a BUG_ON(vif->task). Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 02 Dec, 2013 15 commits
-
-
David S. Miller authored
This reverts commit 018c5bba. It causes regressions for people using chips driven by the sungem driver. Suspicion is that the skb->csum value isn't being adjusted properly. The change also has a bug in that if __pskb_trim() fails, we'll leave a corruped skb->csum value in there. We would really need to revert it to it's original value in that case. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Few network drivers really supports frag_list : virtual drivers. Some drivers wrongly advertise NETIF_F_FRAGLIST feature. If skb with a frag_list is given to them, packet on the wire will be corrupt. Remove this flag, as core networking stack will make sure to provide packets that can be sent without corruption. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Cc: Anirudha Sarangi <anirudh@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kamala R authored
The behaviour of blackhole and prohibit routes has been corrected by setting the input and output pointers of the dst variable appropriately. For blackhole routes, they are set to dst_discard and to ip6_pkt_discard and ip6_pkt_discard_out respectively for prohibit routes. ipv6: ip6_pkt_prohibit(_out) should not depend on CONFIG_IPV6_MULTIPLE_TABLES We need ip6_pkt_prohibit(_out) available without CONFIG_IPV6_MULTIPLE_TABLES Signed-off-by: Kamala R <kamala@aristanetworks.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
François-Xavier Le Bail authored
Signed-off-by: Francois-Xavier Le Bail <fx.lebail@yahoo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sebastian Siewior authored
On tx submit the driver always dma_map_single() FEC_ENET_TX_FRSIZE (=2048) bytes. This works because we don't overwrite any memory after the data buffer, we remove it from cache if it was there. So we hurt performace in case the mapping of a smaller area makes a difference. There is also a bug: If the data area starts shortly before the end of RAM say 0xc7fffa10 and the RAM ends at 0xc8000000 then we have enough space to fit the data area (according to skb->len) but we would map beyond end of ram if we are using 2048. In v2.6.31 (against which kernel this patch made) there is the following check in dma_cache_maint(): |BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(start + size - 1)); Since the area starting at 0xc8000000 is no longer virt_addr_valid() we BUG() during dma_map_single(). The BUG() statement was removed in v3.5-rc1 as per 2dc6a016 ("ARM: dma-mapping: use asm-generic/dma-mapping-common.h"). This patch was tested on v2.6.31 and then forward-ported and compile tested only against the net tree. I think it is still worth fixing mainline even after the BUG() statement is gone. Tested-by: Fugang Duan <B38611@freescale.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mugunthan V N authored
When only one port of the two port is pinned out, then dt probe is failing because second port phy is not found. fixing this by checking the number of slaves and breaking the loop. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rafael J. Wysocki authored
Modify tg3_chip_reset() and tg3_close() to check if the PCI network adapter device is accessible at all in order to skip poking it or trying to handle a carrier loss in vain when that's not the case. Introduce a special PCI helper function pci_device_is_present() for this purpose. Of course, this uncovers the lack of the appropriate RTNL locking in tg3_suspend() and tg3_resume(), so add that locking in there too. These changes prevent tg3 from burning a CPU at 100% load level for solid several seconds after the Thunderbolt link is disconnected from a Matrox DS1 docking station. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Duan Jiong authored
when dealing with a RA message, if accept_ra_defrtr is false, the kernel will not add the default route, and then deal with the following route information options. Unfortunately, those options maybe contain default route, so let's judge the accept_ra_defrtr before calling rt6_route_rcv. Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: - Correction of fuzzy and fragile IRQ_RETVAL macro - IRQ related resume fix affecting only XEN - ARM/GIC fix for chained GIC controllers * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: Gic: fix boot for chained gics irq: Enable all irqs unconditionally in irq_resume genirq: Correct fuzzy and fragile IRQ_RETVAL() definition
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Various smaller fixlets, all over the place" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/doc: Fix generation of device-drivers sched: Expose preempt_schedule_irq() sched: Fix a trivial typo in comments sched: Remove unused variable in 'struct sched_domain' sched: Avoid NULL dereference on sd_busy sched: Check sched_domain before computing group power MAINTAINERS: Update file patterns in the lockdep and scheduler entries
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Misc kernel and tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tools lib traceevent: Fix conversion of pointer to integer of different size perf/trace: Properly use u64 to hold event_id perf: Remove fragile swevent hlist optimization ftrace, perf: Avoid infinite event generation loop tools lib traceevent: Fix use of multiple options in processing field perf header: Fix possible memory leaks in process_group_desc() perf header: Fix bogus group name perf tools: Tag thread comm as overriden
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull Xen bug-fixes from Konrad Rzeszutek Wilk: "Fixes to patches that went in this merge window along with a latent bug: - Fix lazy flushing in case m2p override fails. - Fix module compile issues with ARM/Xen - Add missing call to DMA map page for Xen SWIOTLB for ARM" * tag 'stable/for-linus-3.13-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/gnttab: leave lazy MMU mode in the case of a m2p override failure xen/arm: p2m_init and p2m_lock should be static arm/xen: Export phys_to_mach to fix Xen module link errors swiotlb-xen: add missing xen_dma_map_page call
-
Arend van Spriel authored
Building brcmfmac for sparc64 gave the following warning: CC [M] drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.o bcmsdh_sdmmc.c: In function 'brcmf_sdioh_request_byte': bcmsdh_sdmmc.c:89:6: warning: 'err_ret' may be used uninitialized in this function [-Wuninitialized] Inspecting the code it indeed had a path of execution in which the return value was used uninitialized. This patch fixes that code path. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Michal Nazarewicz authored
If kmalloc fails wcn36xx_smd_rsp_process will attempt to dereference a NULL pointer. There might be a better error recovery then just printing an error, but printing an error message is better then the current behaviour. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-