D:2003/08/27 17:44:23
C:PPC PMAC driver,PPC Tumbler driver
A:Takashi Iwai <tiwai@suse.de>
F:ppc/pmac.c:1.23->1.24 
F:ppc/tumbler.c:1.22->1.23 
L:- initialize tumbler/snapper audio via gpio before i2c initialization.
L:- enabled capture on snapper.  don't know whether it works :)

D:2003/08/27 17:17:31
C:AC97 Codec Core
A:Takashi Iwai <tiwai@suse.de>
F:include/ac97_codec.h:1.31->1.32 
F:pci/ac97/ac97_codec.c:1.101->1.102 
F:pci/ac97/ac97_local.h:1.1->1.2 
F:pci/ac97/ac97_patch.c:1.19->1.20 
L:- added the support for stereo mute switches on AD198x.
L:- clean up of creation routines of normal stereo controls.

D:2003/08/27 17:12:03
C:Documentation,VIA82xx driver
A:Takashi Iwai <tiwai@suse.de>
F:Documentation/ALSA-Configuration.txt:1.15->1.16 
F:pci/via82xx.c:1.46->1.47 
L:- use dxs_support=3 (48k fixed) as default, since there are so many problems
L:  with dxs_support=0.
L:- added kernel boot parameter for dxs_support option.

D:2003/08/27 17:05:36
C:Documentation
A:Takashi Iwai <tiwai@suse.de>
F:Documentation/OSS-Emulation.txt:1.4->1.5 
L:added descriptions for whole-frag and no-silence commands.

D:2003/08/27 17:04:36
C:AC97 Codec Core
A:Takashi Iwai <tiwai@suse.de>
F:pci/ac97/ac97_patch.c:1.18->1.19 
L:- define AD198x bits.
L:- enable AD-compatible mode on AD1985.

D:2003/08/25 08:53:37
C:ALSA Core
A:Jaroslav Kysela <perex@suse.cz>
F:core/info.c:1.39->1.40 
L:Jeff Muizelaar <muizelaar@rogers.com>
L:The attached patch cleans up the usage of the size variable and removes size1.

  - updated documentation and timestamp

D:2003/08/20 10:59:59
A:Jaroslav Kysela <perex@suse.cz>
F:usb/usbaudio.c:1.62->1.63 
F:usb/usbaudio.h:1.20->1.21 
F:usb/usbmixer.c:1.21->1.22 
L:Synced USB audio driver with the latest 2.6 code

D:2003/08/16 10:54:09
A:Jaroslav Kysela <perex@suse.cz>
F:core/oss/pcm_oss.c:1.45->1.46 
L:Fixed open for O_RDWR when capture is not available

D:2003/08/14 17:05:13
A:Takashi Iwai <tiwai@suse.de>
F:pci/ac97/ac97_codec.c:1.100->1.101 
L:fix by James Courtier-Dutton <James@superbug.demon.co.uk>:
L:
L:Fixes ac3 passthru non-audio bit setting for AC97 codecs.
L:
L:I have :-
L:Card: Intel ICH5
L:Chip: Avance Logic ALC650 rev 0
L:
L:The problem I was having was that the spdif non-audio bit was not
L:being set.
L:This patch fixes that problem.

D:2003/08/14 12:05:38
A:Takashi Iwai <tiwai@suse.de>
F:drivers/opl3/opl3_lib.c:1.17->1.18 
F:isa/gus/gusclassic.c:1.10->1.11 
F:isa/gus/gusextreme.c:1.10->1.11 
F:isa/gus/gusmax.c:1.11->1.12 
F:pci/azt3328.c:1.2->1.3 
F:pci/cs4281.c:1.43->1.44 
F:pci/ens1370.c:1.47->1.48 
F:pci/es1938.c:1.26->1.27 
F:pci/es1968.c:1.51->1.52 
F:pci/sonicvibes.c:1.25->1.26 
F:pci/via82xx.c:1.45->1.46 
F:pci/cs46xx/cs46xx_lib.c:1.62->1.63 
F:pci/ice1712/ice1712.c:1.32->1.33 
F:pci/ice1712/ice1724.c:1.14->1.15 
F:pci/trident/trident_main.c:1.45->1.46 
F:pci/ymfpci/ymfpci_main.c:1.40->1.41 
F:sparc/amd7930.c:1.6->1.7 
F:sparc/cs4231.c:1.8->1.9 
L:fixed the wrong order of object destruction:
L:  a released object is referred after the *_free() call.

D:2003/08/14 11:55:18
A:Takashi Iwai <tiwai@suse.de>
F:pci/ymfpci/ymfpci_main.c:1.39->1.40 
L:register dump in the proc file.

D:2003/08/13 14:14:31
A:Takashi Iwai <tiwai@suse.de>
F:arm/sa11xx-uda1341.c:1.11->1.12 
L:fixed missing spin_lock_init().

D:2003/08/13 14:01:22
A:Takashi Iwai <tiwai@suse.de>
F:isa/opl3sa2.c:1.28->1.29 
L:fixed the uninitialized spin_lock.

D:2003/08/11 13:37:56
A:Takashi Iwai <tiwai@suse.de>
F:Documentation/DocBook/writing-an-alsa-driver.tmpl:1.12->1.13 
L:fix typos

D:2003/08/11 13:37:36
A:Takashi Iwai <tiwai@suse.de>
F:pci/intel8x0.c:1.87->1.88 
L:fix mixed up vendor/device ID's for Asus P4P800

D:2003/08/11 10:20:00
A:Jaroslav Kysela <perex@suse.cz>
F:pci/es1968.c:1.49->1.50 
L:Removed bob_lock spinlock

D:2003/08/07 15:18:56
A:Takashi Iwai <tiwai@suse.de>
F:pci/es1968.c:1.48->1.49 
L:- hopefully fixed the capture.
L:- align the buffers in 4k.
L:- a bit code clean up.

D:2003/08/06 18:45:09
A:Takashi Iwai <tiwai@suse.de>
F:core/oss/pcm_plugin.c:1.15->1.16 
F:core/oss/pcm_plugin.h:1.4->1.5 
L:removed unused functions.

D:2003/08/06 18:44:50
A:Takashi Iwai <tiwai@suse.de>
F:pci/es1968.c:1.47->1.48 
L:removed buggy copy callback.
L:the standard copy routine works properly.

D:2003/08/06 12:13:57
A:Takashi Iwai <tiwai@suse.de>
F:Documentation/ALSA-Configuration.txt:1.13->1.14 
L:more descriptions for vx drivers.

D:2003/08/05 13:45:12
A:Takashi Iwai <tiwai@suse.de>
F:pci/es1968.c:1.46->1.47 
L:- fixed corruption of stream linked list in the interrupt handler.
L:- clean up the unnecessary atomic_t and spinlocks.

D:2003/08/05 13:43:10
A:Takashi Iwai <tiwai@suse.de>
F:pci/es1968.c:1.45->1.46 
L:- rewritten the pm whitelist as a static list.
L:- added more pci subsystem ids to the whitelist.

D:2003/08/05 13:42:23
A:Takashi Iwai <tiwai@suse.de>
F:pci/emu10k1/emufx.c:1.36->1.37 
L:fixed typos.

D:2003/07/30 19:54:01
A:Jaroslav Kysela <perex@suse.cz>
F:include/emu10k1.h:1.29->1.30 
L:Fixed typos (GRP->GPR)

D:2003/07/30 16:35:33
A:Takashi Iwai <tiwai@suse.de>
F:pci/es1968.c:1.44->1.45 
L:added use_pm to the kernel boot parameter.

D:2003/07/30 15:39:38
A:Takashi Iwai <tiwai@suse.de>
F:pci/intel8x0.c:1.86->1.87 
L:- improved the probe/resume function.
L:  check only the valid codec bits in chip_init() during resume.

D:2003/07/30 11:54:03
A:Takashi Iwai <tiwai@suse.de>
F:include/ac97_codec.h:1.30->1.31 
F:pci/intel8x0.c:1.85->1.86 
F:pci/via82xx.c:1.43->1.44 
F:pci/ac97/ac97_codec.c:1.99->1.100 
F:pci/ac97/ac97_patch.c:1.17->1.18 
F:pci/ac97/ac97_patch.h:1.8->1.9 
L:- added quirk type AC97_TUNE_AD_SHARING.
L:- added mask field to snd_ac97_quirk.
L:- new patch for AD1985.  set more config bits for line/mic sharing.
L:- rewritten quirk table in C99 init style.
L:- more quirks for intel ICH5/AD1985 boards.

D:2003/07/29 16:16:43
A:Jaroslav Kysela <perex@suse.cz>
F:pci/ice1712/ice1724.c:1.12->1.13 
L:Fixed 192kHz support

D:2003/07/28 14:50:51
A:Takashi Iwai <tiwai@suse.de>
F:pci/rme9652/hdsp.c:1.41->1.42 
L:added the support for rev 50 cards.

This should fix the MCA problems.

I moved the name field to the struct mca_device because it was in such
extensive use, and this approach caused the least impact.

Let not my fingers type in haste.

net/netsyms.c must include linux/ethtool.h, when exporting its symbols.

When writing firewall rules, and you are serving NFS, it's really
useful to know the port numbers of the various NFS services.  nfsd has
a standard value; mountd and statd are userspace daemons, and those
ports are settable on the command line.

The fiddly one is lockd.  nlm_udpport and nlm_tcpport can be set on
the kernel command line or at module load time, but after that it's a
bit awkward (particularly as the lockd module can't be unloaded safely
- "rmmod -f lockd" sometimes panics).

This patch allows the port numbers and the other lockd parameters to
be set through files in /proc/sys/fs/nfs/nlm_*.  The port numbers take
effect when lockd is next started or restarted.

In order to install the sysctl table even when compiled into the
kernel, it was necessary to update the initialisation code to the
current methods, using module_init() et al.  This patch does that and
in so doing updates the module/kernel parameters to use the 2.6
module_param() method, as well as making the numeric range changes
consistent between the two.

The largest "unsigned int" value doesn't fit in a "long", on many machines.
So we should use simple_strtoul, not simple_strtol, to decode these values.

ethtool helpers need exporting.

This will correct the sb_card compile error from removing "name" from
"struct device".

I also decided to read the name from the card structure instead of the
device structure because, for isapnp devices, the card structure is more
likely to contain an appropriate name.

Don't prepend $(obj) to "targets", since the generic rules will
do that for us, and doing it twice just makes things not work.

This fixes a bug with multiple targets.

Olaf Hering reported that the build failed for PowerPc if used like
this: make oldconfig zImage

The reason for this was that .config was not present for any targets
specified in arch/$(ARCH)/Makefile and below.

That's because .config would not be included when oldconfig is present
in the list of targets.  The fix is to move handling of *config task to
the kconfig/Makefile.  Furthermore the logic in top-level makefile has
changed a bit, creating a more logial structure.  When building a fresh
kernel, the user is now told that .config is missing, not an anonymous
report that .config did not exist.

The error has survided this long because the targets used in i386/boot
in general does not use CONFIG_ symbols.

Olaf Hering has tested this patch with success.