1. 07 Dec, 2015 6 commits
  2. 06 Dec, 2015 10 commits
  3. 05 Dec, 2015 6 commits
  4. 04 Dec, 2015 10 commits
    • Pavel Machek's avatar
      atl1c: Improve driver not to do order 4 GFP_ATOMIC allocation · f2a3771a
      Pavel Machek authored
      atl1c driver is doing order-4 allocation with GFP_ATOMIC
      priority. That often breaks  networking after resume. Switch to
      GFP_KERNEL. Still not ideal, but should be significantly better.
      
      atl1c_setup_ring_resources() is called from .open() function, and
      already uses GFP_KERNEL, so this change is safe.
      Signed-off-by: default avatarPavel Machek <pavel@ucw.cz>
      Acked-by: default avatarMichal Hocko <mhocko@suse.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f2a3771a
    • Herbert Xu's avatar
      rhashtable: Use __vmalloc with GFP_ATOMIC for table allocation · d3716f18
      Herbert Xu authored
      When an rhashtable user pounds rhashtable hard with back-to-back
      insertions we may end up growing the table in GFP_ATOMIC context.
      Unfortunately when the table reaches a certain size this often
      fails because we don't have enough physically contiguous pages
      to hold the new table.
      
      Eric Dumazet suggested (and in fact wrote this patch) using
      __vmalloc instead which can be used in GFP_ATOMIC context.
      Reported-by: default avatarPhil Sutter <phil@nwl.cc>
      Suggested-by: default avatarEric Dumazet <eric.dumazet@gmail.com>
      Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d3716f18
    • Nicolas Dichtel's avatar
      gre6: allow to update all parameters via rtnl · 6a61d4db
      Nicolas Dichtel authored
      Parameters were updated only if the kernel was unable to find the tunnel
      with the new parameters, ie only if core pamareters were updated (keys,
      addr, link, type).
      Now it's possible to update ttl, hoplimit, flowinfo and flags.
      
      Fixes: c12b395a ("gre: Support GRE over IPv6")
      Signed-off-by: default avatarNicolas Dichtel <nicolas.dichtel@6wind.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6a61d4db
    • Guillaume Nault's avatar
      pppoe: fix memory corruption in padt work structure · fe53985a
      Guillaume Nault authored
      pppoe_connect() mustn't touch the padt_work field of pppoe sockets
      because that work could be already pending.
      
      [   21.473147] BUG: unable to handle kernel NULL pointer dereference at 00000004
      [   21.474523] IP: [<c1043177>] process_one_work+0x29/0x31c
      [   21.475164] *pde = 00000000
      [   21.475513] Oops: 0000 [#1] SMP
      [   21.475910] Modules linked in: pppoe pppox ppp_generic slhc crc32c_intel aesni_intel virtio_net xts aes_i586 lrw gf128mul ablk_helper cryptd evdev acpi_cpufreq processor serio_raw button ext4 crc16 mbcache jbd2 virtio_blk virtio_pci virtio_ring virtio
      [   21.476168] CPU: 2 PID: 164 Comm: kworker/2:2 Not tainted 4.4.0-rc1 #1
      [   21.476168] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
      [   21.476168] task: f5f83c00 ti: f5e28000 task.ti: f5e28000
      [   21.476168] EIP: 0060:[<c1043177>] EFLAGS: 00010046 CPU: 2
      [   21.476168] EIP is at process_one_work+0x29/0x31c
      [   21.484082] EAX: 00000000 EBX: f678b2a0 ECX: 00000004 EDX: 00000000
      [   21.484082] ESI: f6c69940 EDI: f5e29ef0 EBP: f5e29f0c ESP: f5e29edc
      [   21.484082]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
      [   21.484082] CR0: 80050033 CR2: 000000a4 CR3: 317ad000 CR4: 00040690
      [   21.484082] Stack:
      [   21.484082]  00000000 f6c69950 00000000 f6c69940 c0042338 f5e29f0c c1327945 00000000
      [   21.484082]  00000008 f678b2a0 f6c69940 f678b2b8 f5e29f30 c1043984 f5f83c00 f6c69970
      [   21.484082]  f678b2a0 c10437d3 f6775e80 f678b2a0 c10437d3 f5e29fac c1047059 f5e29f74
      [   21.484082] Call Trace:
      [   21.484082]  [<c1327945>] ? _raw_spin_lock_irq+0x28/0x30
      [   21.484082]  [<c1043984>] worker_thread+0x1b1/0x244
      [   21.484082]  [<c10437d3>] ? rescuer_thread+0x229/0x229
      [   21.484082]  [<c10437d3>] ? rescuer_thread+0x229/0x229
      [   21.484082]  [<c1047059>] kthread+0x8f/0x94
      [   21.484082]  [<c1327a32>] ? _raw_spin_unlock_irq+0x22/0x26
      [   21.484082]  [<c1327ee9>] ret_from_kernel_thread+0x21/0x38
      [   21.484082]  [<c1046fca>] ? kthread_parkme+0x19/0x19
      [   21.496082] Code: 5d c3 55 89 e5 57 56 53 89 c3 83 ec 24 89 d0 89 55 e0 8d 7d e4 e8 6c d8 ff ff b9 04 00 00 00 89 45 d8 8b 43 24 89 45 dc 8b 45 d8 <8b> 40 04 8b 80 e0 00 00 00 c1 e8 05 24 01 88 45 d7 8b 45 e0 8d
      [   21.496082] EIP: [<c1043177>] process_one_work+0x29/0x31c SS:ESP 0068:f5e29edc
      [   21.496082] CR2: 0000000000000004
      [   21.496082] ---[ end trace e362cc9cf10dae89 ]---
      Reported-by: default avatarAndrew <nitr0@seti.kr.ua>
      Fixes: 287f3a94 ("pppoe: Use workqueue to die properly when a PADT is received")
      Signed-off-by: default avatarGuillaume Nault <g.nault@alphalink.fr>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fe53985a
    • David S. Miller's avatar
      Merge branch 'mvpp2-fixes' · 6001f340
      David S. Miller authored
      Marcin Wojtas says:
      
      ====================
      Marvell Armada 375 mvpp2 fixes
      
      During my work on mvneta driver I revised mvpp2, and it occurred that the
      initial version of Marvell Armada 375 SoC comprised bugs around
      DMA-unmapping in both ingress and egress paths - not all buffers were
      umapped in TX path and none(!) in RX. Three patches that I send fix
      this situation.
      
      Any feedback would be welcome.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6001f340
    • Marcin Wojtas's avatar
      net: mvpp2: fix refilling BM pools in RX path · b5015854
      Marcin Wojtas authored
      In hitherto code in case of RX buffer allocation error during refill,
      original buffer is pushed to the network stack, but the amount of
      available buffer pointers in BM pool is decreased.
      
      This commit fixes the situation by moving refill call before skb_put(),
      and returning original buffer pointer to the pool in case of an error.
      Signed-off-by: default avatarMarcin Wojtas <mw@semihalf.com>
      
      Fixes: 3f518509 ("ethernet: Add new driver for Marvell Armada 375
      network unit")
      
      Cc: <stable@vger.kernel.org> # v3.18+
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b5015854
    • Marcin Wojtas's avatar
      net: mvpp2: fix buffers' DMA handling on RX path · 4229d502
      Marcin Wojtas authored
      Each allocated buffer, whose pointer is put into BM pool is DMA-mapped.
      Hence it should be properly unmapped after usage or when removing buffers
      from pool.
      
      This commit fixes DMA handling on RX path by adding dma_unmap_single() in
      mvpp2_rx() and in mvpp2_bufs_free(). The latter function's argument number
      had to be increased for this purpose.
      Signed-off-by: default avatarMarcin Wojtas <mw@semihalf.com>
      
      Fixes: 3f518509 ("ethernet: Add new driver for Marvell Armada 375
      network unit")
      
      Cc: <stable@vger.kernel.org> # v3.18+
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4229d502
    • Marcin Wojtas's avatar
      net: mvpp2: fix missing DMA region unmap in egress processing · e864b4c7
      Marcin Wojtas authored
      The Tx descriptor release code currently calls dma_unmap_single() and
      dev_kfree_skb_any() if the descriptor is associated with a non-NULL skb.
      This condition is true only for the last fragment of the packet.
      
      Since every descriptor's buffer is DMA-mapped it has to be properly
      unmapped.
      Signed-off-by: default avatarMarcin Wojtas <mw@semihalf.com>
      
      Fixes: 3f518509 ("ethernet: Add new driver for Marvell Armada 375
      network unit")
      
      Cc: <stable@vger.kernel.org> # v3.18+
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e864b4c7
    • Herbert Xu's avatar
      rhashtable: Prevent spurious EBUSY errors on insertion · 3cf92222
      Herbert Xu authored
      Thomas and Phil observed that under stress rhashtable insertion
      sometimes failed with EBUSY, even though this error should only
      ever been seen when we're under attack and our hash chain length
      has grown to an unacceptable level, even after a rehash.
      
      It turns out that the logic for detecting whether there is an
      existing rehash is faulty.  In particular, when two threads both
      try to grow the same table at the same time, one of them may see
      the newly grown table and thus erroneously conclude that it had
      been rehashed.  This is what leads to the EBUSY error.
      
      This patch fixes this by remembering the current last table we
      used during insertion so that rhashtable_insert_rehash can detect
      when another thread has also done a resize/rehash.  When this is
      detected we will give up our resize/rehash and simply retry the
      insertion with the new table.
      Reported-by: default avatarThomas Graf <tgraf@suug.ch>
      Reported-by: default avatarPhil Sutter <phil@nwl.cc>
      Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
      Tested-by: default avatarPhil Sutter <phil@nwl.cc>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3cf92222
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 071f5d10
      Linus Torvalds authored
      Pull networking fixes from David Miller:
       "A lot of Thanksgiving turkey leftovers accumulated, here goes:
      
         1) Fix bluetooth l2cap_chan object leak, from Johan Hedberg.
      
         2) IDs for some new iwlwifi chips, from Oren Givon.
      
         3) Fix rtlwifi lockups on boot, from Larry Finger.
      
         4) Fix memory leak in fm10k, from Stephen Hemminger.
      
         5) We have a route leak in the ipv6 tunnel infrastructure, fix from
            Paolo Abeni.
      
         6) Fix buffer pointer handling in arm64 bpf JIT,f rom Zi Shen Lim.
      
         7) Wrong lockdep annotations in tcp md5 support, fix from Eric
            Dumazet.
      
         8) Work around some middle boxes which prevent proper handling of TCP
            Fast Open, from Yuchung Cheng.
      
         9) TCP repair can do huge kmalloc() requests, build paged SKBs
            instead.  From Eric Dumazet.
      
        10) Fix msg_controllen overflow in scm_detach_fds, from Daniel
            Borkmann.
      
        11) Fix device leaks on ipmr table destruction in ipv4 and ipv6, from
            Nikolay Aleksandrov.
      
        12) Fix use after free in epoll with AF_UNIX sockets, from Rainer
            Weikusat.
      
        13) Fix double free in VRF code, from Nikolay Aleksandrov.
      
        14) Fix skb leaks on socket receive queue in tipc, from Ying Xue.
      
        15) Fix ifup/ifdown crach in xgene driver, from Iyappan Subramanian.
      
        16) Fix clearing of persistent array maps in bpf, from Daniel
            Borkmann.
      
        17) In TCP, for the cross-SYN case, we don't initialize tp->copied_seq
            early enough.  From Eric Dumazet.
      
        18) Fix out of bounds accesses in bpf array implementation when
            updating elements, from Daniel Borkmann.
      
        19) Fill gaps in RCU protection of np->opt in ipv6 stack, from Eric
            Dumazet.
      
        20) When dumping proxy neigh entries, we have to accomodate NULL
            device pointers properly, from Konstantin Khlebnikov.
      
        21) SCTP doesn't release all ipv6 socket resources properly, fix from
            Eric Dumazet.
      
        22) Prevent underflows of sch->q.qlen for multiqueue packet
            schedulers, also from Eric Dumazet.
      
        23) Fix MAC and unicast list handling in bnxt_en driver, from Jeffrey
            Huang and Michael Chan.
      
        24) Don't actively scan radar channels, from Antonio Quartulli"
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (110 commits)
        net: phy: reset only targeted phy
        bnxt_en: Setup uc_list mac filters after resetting the chip.
        bnxt_en: enforce proper storing of MAC address
        bnxt_en: Fixed incorrect implementation of ndo_set_mac_address
        net: lpc_eth: remove irq > NR_IRQS check from probe()
        net_sched: fix qdisc_tree_decrease_qlen() races
        openvswitch: fix hangup on vxlan/gre/geneve device deletion
        ipv4: igmp: Allow removing groups from a removed interface
        ipv6: sctp: implement sctp_v6_destroy_sock()
        arm64: bpf: add 'store immediate' instruction
        ipv6: kill sk_dst_lock
        ipv6: sctp: add rcu protection around np->opt
        net/neighbour: fix crash at dumping device-agnostic proxy entries
        sctp: use GFP_USER for user-controlled kmalloc
        sctp: convert sack_needed and sack_generation to bits
        ipv6: add complete rcu protection around np->opt
        bpf: fix allocation warnings in bpf maps and integer overflow
        mvebu: dts: enable IP checksum with jumbo frames for Armada 38x on Port0
        net: mvneta: enable setting custom TX IP checksum limit
        net: mvneta: fix error path for building skb
        ...
      071f5d10
  5. 03 Dec, 2015 8 commits
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.dk/linux-block · 2873d32f
      Linus Torvalds authored
      Pull block fixes from Jens Axboe:
       "A collection of fixes from this series.  The most important here is a
        regression fix for an issue that some folks would hit in blk-merge.c,
        and the NVMe queue depth limit for the screwed up Apple "nvme"
        controller.
      
        In more detail, this pull request contains:
      
         - a set of fixes for null_blk, including a fix for a few corner cases
           where we could hang the device.  From Arianna and Paolo.
      
         - lightnvm:
              - A build improvement from Keith.
              - Update the qemu pci id detection from Matias.
              - Error handling fixes for leaks and other little fixes from
                Sudip and Wenwei.
      
         - fix from Eric where BLKRRPART would not return EBUSY for whole
           device mounts, only when partitions were mounted.
      
         - fix from Jan Kara, where EOF O_DIRECT reads would return
           negatively.
      
         - remove check for rq_mergeable() when checking limits for cloned
           requests.  The check doesn't make any sense.  It's assuming that
           since NOMERGE is set on the request that we don't have to
           recalculate limits since the request didn't change, but that's not
           true if the request has been redirected.  From Hannes.
      
         - correctly get the bio front segment value set for single segment
           bio's, fixing a BUG() in blk-merge.  From Ming"
      
      * 'for-linus' of git://git.kernel.dk/linux-block:
        nvme: temporary fix for Apple controller reset
        null_blk: change type of completion_nsec to unsigned long
        null_blk: guarantee device restart in all irq modes
        null_blk: set a separate timer for each command
        blk-merge: fix computing bio->bi_seg_front_size in case of single segment
        direct-io: Fix negative return from dio read beyond eof
        block: Always check queue limits for cloned requests
        lightnvm: missing nvm_lock acquire
        lightnvm: unconverted ppa returned in get_bb_tbl
        lightnvm: refactor and change vendor id for qemu
        lightnvm: do device max sectors boundary check first
        lightnvm: fix ioctl memory leaks
        lightnvm: free memory when gennvm register fails
        lightnvm: Simplify config when disabled
        Return EBUSY from BLKRRPART for mounted whole-dev fs
      2873d32f
    • Linus Torvalds's avatar
      Merge tag 'trace-v4.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace · c041f087
      Linus Torvalds authored
      Pull tracing fix from Steven Rostedt:
       "During the merge window I added a new file that is used to filter
        trace events on pids.  It filters all events where only tasks with
        their pid in that file exists.  It also handles the sched_switch and
        sched_wakeup trace events where the current task does not have its pid
        in the file, but the task either being switched to or awaken does.
      
        Unfortunately, I forgot about sched_wakeup_new and sched_waking.  Both
        of these tracepoints use the same class as the sched_wakeup
        tracepoint, and they too should be included in what gets filtered by
        the set_event_pid file"
      
      * tag 'trace-v4.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
        tracing: Add sched_wakeup_new and sched_waking tracepoints for pid filter
      c041f087
    • Jesse Brandeburg's avatar
      i40e/i40evf: avoid mutex re-init · 8ddb3326
      Jesse Brandeburg authored
      If the driver were to happen to have a mutex held while
      the i40e_init_adminq call was called, the init_adminq might
      inadvertently call mutex_init on a lock that was held
      which is a violation of the calling semantics.
      
      Fix this by avoiding adminq.c code allocating/freeing this memory, and
      then do the same work only once in probe/remove.
      
      Testing Hints (Required if no HSD): for VF, load i40evf in bare metal
      and echo 32 > sriov_numvfs; echo 0 > sriov_numvfs in a loop.  Yes this
      is a horrible thing to do.
      
      Change-ID: Ida263c51b34e195252179e7e5e400d73a99be7a2
      Reported-by: default avatarStefan Assmann <sassmann@redhat.com>
      Signed-off-by: default avatarJesse Brandeburg <jesse.brandeburg@intel.com>
      Tested-by: default avatarAndrew Bowers <andrewx.bowers@intel.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      8ddb3326
    • Jeff Kirsher's avatar
      MAINTAINERS: Update Intel Wired LAN reviewers · 6e80a18c
      Jeff Kirsher authored
      Since Matthew has moved on to other pastures and no longer works
      for Intel, remove him from the list of reviewers and add Bruce
      Allan as his replacement.
      
      CC: Bruce Allan <bruce.w.allan@intel.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      6e80a18c
    • Jeff Kirsher's avatar
      e100.txt: Cleanup license info in kernel doc · a3fb6568
      Jeff Kirsher authored
      Apparently the e100.txt document contained a "License" section left
      over from days of old, which does not need to be in the kernel
      documentation.  So clean it up..
      
      CC: John Ronciak <john.ronciak@intel.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      Tested-by: default avatarAaron Brown <aaron.f.brown@intel.com>
      a3fb6568
    • David S. Miller's avatar
      Merge tag 'mac80211-for-davem-2015-12-02' of... · e3c9b1ef
      David S. Miller authored
      Merge tag 'mac80211-for-davem-2015-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
      
      Johannes Berg says:
      
      ====================
      A small set of fixes for 4.4:
       * fix scanning in mac80211 to not actively scan radar
         channels (from Antonio)
       * fix uninitialized variable in remain-on-channel that
         could lead to treating frame TX as remain-on-channel
         and not sending the frame at all
       * remove NL80211_FEATURE_FULL_AP_CLIENT_STATE again, it
         was broken and needs more work, we'll enable it later
       * fix call_rcu() induced use-after-reset/free in mesh
         (that was suddenly causing issues in certain tests)
       * always request block-ack window size 64 as we found
         some APs will otherwise crash (really ...)
       * fix P2P-Device teardown sequence to avoid restarting
         with uninitialized data
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e3c9b1ef
    • Alexander Duyck's avatar
      ixgbe: Reset interface after enabling SR-IOV · bf4d67d9
      Alexander Duyck authored
      Enabling SR-IOV and then bringing the interface up was resulting in the PF
      MAC addresses getting into a bad state.  Specifically the MAC address was
      enabled for both VF 0 and the PF.  This resulted in some odd behaviors such
      as VF 0 receiving a copy of the PFs traffic, which in turn enables the
      ability for VF 0 to spoof the PF.
      
      A workaround for this issue appears to be to bring up the interface first
      and then enable SR-IOV as this way the reset is then triggered in the
      existing code.
      
      In order to correct this I have added a change to ixgbe_setup_tc where if
      the interface is down we still will at least call ixgbe_reset so that the
      MAC addresses for the device are reset to the correct pools.
      
      Steps to reproduce issue:
      modprobe ixgbe
      echo 7 > /sys/bus/pci/devices/0000\:01\:00.1/sriov_numvfs
      ifconfig enp1s0f1 up
      ethregs -s 1:00.1 | grep MPSAR | grep -v 00000000
      
      Result:
      	MPSAR[0]               00000081
      	MPSAR[254]             00000001
      
      Expected Result, behavior after patch:
      	MPSAR[0]               00000080
      	MPSAR[254]             00000080
      Signed-off-by: default avatarAlexander Duyck <aduyck@mirantis.com>
      Tested-by: default avatarDarin Miller <darin.j.miller@intel.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      bf4d67d9
    • Jérôme Pouiller's avatar
      net: phy: reset only targeted phy · cf18b778
      Jérôme Pouiller authored
      It is possible to address another chip on same MDIO bus. The case is
      correctly handled for media advertising. It is taken into account
      only if mii_data->phy_id == phydev->addr. However, this condition
      was missing for reset case.
      Signed-off-by: default avatarJérôme Pouiller <jezz@sysmic.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cf18b778