- 15 Jan, 2020 40 commits
-
-
Chuck Lever authored
To safely get rid of all rpcrdma_reps from a particular connection instance, xprtrdma has to wait until each of those reps is finished being used. A rep may be backing the rq_rcv_buf of an RPC that has just completed, for example. Since it is safe to invoke rpcrdma_rep_destroy() only in the Receive completion handler, simply mark reps remaining in the rb_all_reps list after the transport is drained. These will then be deleted as rpcrdma_post_recvs pulls them off the rep free list. Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com>
-
Chuck Lever authored
This reduces the hardware and memory footprint of an unconnected transport. At some point in the future, transport reconnect will allow resolving the destination IP address through a different device. The current change enables reps for the new connection to be allocated on whichever NUMA node the new device affines to after a reconnect. Note that this does not destroy _all_ the transport's reps... there will be a few that are still part of a running RPC completion. Signed-off-by:
-
Chuck Lever authored
Currently the underlying RDMA device is chosen at transport set-up time. But it will soon be at connect time instead. The maximum size of a transport header is based on device capabilities. Thus transport header buffers have to be allocated _after_ the underlying device has been chosen (via address and route resolution); ie, in the connect worker. Thus, move the allocation of transport header buffers to the connect worker, after the point at which the underlying RDMA device has been chosen. This also means the RDMA device is available to do a DMA mapping of these buffers at connect time, instead of in the hot I/O path. Make that optimization as well. Signed-off-by:
-
Chuck Lever authored
Refactor: Perform the "is supported" check in rpcrdma_ep_create() instead of in rpcrdma_ia_open(). frwr_open() is where most of the logic to query device attributes is already located. The current code displays a redundant error message when the device does not support FRWR. As an additional clean-up, this patch removes the extra message. Signed-off-by:
-
Chuck Lever authored
To support device hotplug and migrating a connection between devices of different capabilities, we have to guarantee that all in-kernel devices can support the same max NFS payload size (1 megabyte). This means that possibly one or two in-tree devices are no longer supported for NFS/RDMA because they cannot support 1MB rsize/wsize. The only one I confirmed was cxgb3, but it has already been removed from the kernel. Signed-off-by:
-
Chuck Lever authored
Clean up: there is no need to keep two copies of the same value. Also, in subsequent patches, rpcrdma_ep_create() will be called in the connect worker rather than at set-up time. Minor fix: Initialize the transport's sendctx to the value based on the capabilities of the underlying device, not the maximum setting. Signed-off-by:
-
Chuck Lever authored
The size of the sendctx queue depends on the value stored in ia->ri_max_send_sges. This value is determined by querying the underlying device. Eventually, rpcrdma_ia_open() and rpcrdma_ep_create() will be called in the connect worker rather than at transport set-up time. The underlying device will not have been chosen device set-up time. The sendctx queue will thus have to be created after the underlying device has been chosen via address and route resolution; in other words, in the connect worker. Signed-off-by:
-
Chuck Lever authored
Clean-up. The max_send_sge value also happens to be stored in ep->rep_attr. Let's keep just a single copy. Signed-off-by:
-
Colin Ian King authored
Currently the allocation of buf is not being null checked and a null pointer dereference can occur when the memory allocation fails. Fix this by adding a check and returning -ENOMEM. Addresses-Coverity: ("Dereference null return") Fixes: 6d972518b821 ("NFS: Add fs_context support.") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Geert Uytterhoeven authored
If CONFIG_SWAP=n, it does not make much sense to offer the user the option to enable support for swapping over NFS, as that will still fail at run time: # swapon /swap swapon: /swap: swapon failed: Function not implemented Fix this by adding a dependency on CONFIG_SWAP. Fixes: a564b8f0 ("nfs: enable swap on NFS") Signed-off-by:Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Julia Lawall authored
The empty_iov structure is only copied into another structure, so make it const. The opportunity for this change was found using Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by:
-
Murphy Zhou authored
swapon over NFS does not go through generic_swapfile_activate code path when setting up extents. This makes holes in NFS swapfiles possible which is not expected for swapon. Signed-off-by:
Murphy Zhou <jencce.kernel@gmail.com> Signed-off-by:
-
Chuck Lever authored
The xprtrdma connect logic can return -EPROTO if the underlying device or network path does not support RDMA. This can happen after a device removal/insertion. - When SOFTCONN is set, EPROTO is a permanent error. - When SOFTCONN is not set, EPROTO is treated as a temporary error. Signed-off-by:
-
Chuck Lever authored
This seems to be a somewhat common issue with Kerberos NFSv4.0 set-ups. Signed-off-by:
-
Chuck Lever authored
Try to capture the reason for the writeback path tagging an error on a page. Signed-off-by:
-
Chuck Lever authored
Signed-off-by:
-
zhengbin authored
In nfs3_proc_lookup, if nfs_alloc_fattr fails, will only print "NFS call lookup". This may be confusing, move dprintk after nfs_alloc_fattr. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
zhengbin <zhengbin13@huawei.com> Signed-off-by:
-
zhengbin authored
Fixes coccicheck warning: fs/nfs/nfs4state.c:1138:2-3: Unneeded semicolon fs/nfs/nfs4proc.c:6862:2-3: Unneeded semicolon fs/nfs/nfs4proc.c:8629:2-3: Unneeded semicolon Reported-by:
-
Arnd Bergmann authored
On 32-bit architectures, xdr_encode_nfstime4() needlessly truncates timestamps to a 32-bit value in the range between year 1902 and 2038. Change it to use 'struct timespec64' to allow the entire range of values supported by the server. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
For NFSv2 and NFSv3, timestamps are stored using 32-bit entities and overflow in y2038. For historic reasons we truncate the 64-bit timestamps by converting from a timespec64 to a timespec first. Remove this unnecessary conversion step and do the truncation in the final functions that take a timestamp. This is transparent to users, but avoids one of the last uses of 'timespec' and lets us remove it later. Signed-off-by:
-
Arnd Bergmann authored
nfs currently behaves differently on 32-bit and 64-bit kernels regarding the on-disk format of nfs_fscache_inode_auxdata. That format should really be the same on any kernel, and we should avoid the 'timespec' type in order to remove that from the kernel later on. Using plain 'timespec64' would not be good here, since that includes implied padding and would possibly leak kernel stack data to the on-disk format on 32-bit architectures. struct __kernel_timespec would work as a replacement, but open-coding the two struct members in nfs_fscache_inode_auxdata makes it more obvious what's going on here, and keeps the current format for 64-bit architectures. Cc: David Howells <dhowells@redhat.com> Signed-off-by:
-
Arnd Bergmann authored
Push down the use of timespec64 into NFS nfs_fattr, to avoid needless conversions, and get closer to having 64-bit time_t support on 32-bit NFSv4 and removing some old interfaces from the kernel. Signed-off-by:
-
Arnd Bergmann authored
Using signed 32-bit types for UTC time leads to the y2038 overflow, which is what happens in the sunrpc code at the moment. This changes the sunrpc code over to use time64_t where possible. The one exception is the gss_import_v{1,2}_context() function for kerberos5, which uses 32-bit timestamps in the protocol. Here, we can at least treat the numbers as 'unsigned', which extends the range from 2038 to 2106. Signed-off-by: -
Scott Mayhew authored
Split out from commit "NFS: Add fs_context support." Add wrappers nfs_errorf(), nfs_invalf(), and nfs_warnf() which log error information to the fs_context. Convert some printk's to use these new wrappers instead. Signed-off-by:
Scott Mayhew <smayhew@redhat.com> Signed-off-by:
-
Scott Mayhew authored
Split out from commit "NFS: Add fs_context support." This patch adds additional refactoring for the conversion of NFS to use fs_context, namely: (*) Merge nfs_mount_info and nfs_clone_mount into nfs_fs_context. nfs_clone_mount has had several fields removed, and nfs_mount_info has been removed altogether. (*) Various functions now take an fs_context as an argument instead of nfs_mount_info, nfs_fs_context, etc. Signed-off-by: -
David Howells authored
Add filesystem context support to NFS, parsing the options in advance and attaching the information to struct nfs_fs_context. The highlights are: (*) Merge nfs_mount_info and nfs_clone_mount into nfs_fs_context. This structure represents NFS's superblock config. (*) Make use of the VFS's parsing support to split comma-separated lists (*) Pin the NFS protocol module in the nfs_fs_context. (*) Attach supplementary error information to fs_context. This has the downside that these strings must be static and can't be formatted. (*) Remove the auxiliary file_system_type structs since the information necessary can be conveyed in the nfs_fs_context struct instead. (*) Root mounts are made by duplicating the config for the requested mount so as to have the same parameters. Submounts pick up their parameters from the parent superblock. [AV -- retrans is u32, not string] [SM -- Renamed cfg to ctx in a few functions in an earlier patch] [SM -- Moved fs_context mount option parsing to an earlier patch] [SM -- Moved fs_context error logging to a later patch] [SM -- Fixed printks in nfs4_try_get_tree() and nfs4_get_referral_tree()] [SM -- Added is_remount_fc() helper] [SM -- Deferred some refactoring to a later patch] [SM -- Fixed referral mounts, which were broken in the original patch] [SM -- Fixed leak of nfs_fattr when fs_context is freed] Signed-off-by:David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Scott Mayhew authored
Split out from commit "NFS: Add fs_context support." Convert existing mount option definitions to fs_parameter_enum's and fs_parameter_spec's. Parse mount options using fs_parse() and lookup_constant(). Notes: 1) Fixed a typo in the udp6 definition in nfs_xprt_protocol_tokens from the original commit. 2) fs_parse() expects an fs_context as the first arg so that any errors can be logged to the fs_context. We're passing NULL for the fs_context (this will change in commit "NFS: Add fs_context support.") which is okay as it will cause logfc() to do a printk() instead. 3) fs_parse() expects an fs_paramter as the third arg. We're building an fs_parameter manually in nfs_fs_context_parse_option(), which will go away in commit "NFS: Add fs_context support.". Signed-off-by:
-
Scott Mayhew authored
Split out from commit "NFS: Add fs_context support." Rename cfg to ctx in nfs_init_server(), nfs_verify_authflavors(), and nfs_request_mount(). No functional changes. Signed-off-by:
-
David Howells authored
Do some tidying of the parsing code, including: (*) Returning 0/error rather than true/false. (*) Putting the nfs_fs_context pointer first in some arg lists. (*) Unwrap some lines that will now fit on one line. (*) Provide unioned sockaddr/sockaddr_storage fields to avoid casts. (*) nfs_parse_devname() can paste its return values directly into the nfs_fs_context struct as that's where the caller puts them. Signed-off-by: -
David Howells authored
Add a small buffer in nfs_fs_context to avoid string duplication when parsing numbers. Also make the parsing function wrapper place the parsed integer directly in the appropriate nfs_fs_context struct member. Signed-off-by:
-
David Howells authored
Deindent nfs_fs_context_parse_option(). Signed-off-by:
-
David Howells authored
Split nfs_parse_mount_options() to move the prologue, list-splitting and epilogue into one function and the per-option processing into another. Signed-off-by:
-
David Howells authored
Rename struct nfs_parsed_mount_data to struct nfs_fs_context and rename pointers to it to "ctx". At some point this will be pointed to by an fs_context struct's fs_private pointer. Signed-off-by:
-
David Howells authored
The mount argument match tables should never be altered so constify them. Signed-off-by:
-
David Howells authored
Split various bits relating to mount parameterisation out from fs/nfs/super.c into their own file to form the basis of filesystem context handling for NFS. No other changes are made to the code beyond removing 'static' qualifiers. Signed-off-by:
-
Al Viro authored
it's always either nfs_set_sb_security() or nfs_clone_sb_security(), the choice being controlled by mount_info->cloned != NULL. No need to add methods, especially when both instances live right next to the caller and are never accessed anywhere else. Reviewed-by:
-
Al Viro authored
We used to check ->i_op for being nfs_dir_inode_operations. With separate inode_operations for v3 and v4 that became bogus, but rather than going for protocol-dependent comparison we could've just checked ->i_fop instead; _that_ is the same for all protocol versions. Reviewed-by:
-
Al Viro authored
The only possible values are nfs_fill_super and nfs_clone_super. The latter is used only when crossing into a submount and it is almost identical to the former; the only differences are * ->s_time_gran unconditionally set to 1 (even for v2 mounts). Regression dating back to 2012, actually. * ->s_blocksize/->s_blocksize_bits set to that of parent. Rather than messing with the method, stash ->s_blocksize_bits in mount_info in submount case and after the (now unconditional) call of nfs_fill_super() override ->s_blocksize/->s_blocksize_bits if that has been set. Reviewed-by:
-
Al Viro authored
pick it from mount_info Reviewed-by:
-
Al Viro authored
Make it static, even. And remove a stale extern of (long-gone) nfs_xdev_mount_common() from internal.h, while we are at it. Reviewed-by:
-
