- 04 Jul, 2024 6 commits
-
-
Herve Codina authored
Constraints are set by qmc_dai_startup(). These constraints are specific to the interleaved mode. With the future introduction of support for non-interleaved mode, a new set of constraints will be set. To make the code clear and keep qmc_dai_startup() simple, extract the current interleaved mode constraints settings to a specific function. Signed-off-by:
Herve Codina <herve.codina@bootlin.com> Link: https://patch.msgid.link/20240701113038.55144-7-herve.codina@bootlin.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Herve Codina authored
Submitting data to QMC channels is done in several places: transfer completions and DAI start. The operation done is simple and consist in one function call. With the future introduction of support for non-interleaved mode, submitting data will be more complex. To avoid copy/paste of code in several places, introduce qmc_audio_pcm_{read,write}_submit() whose goal is to handle this data submission. Signed-off-by: -
Herve Codina authored
The current QMC audio driver uses only one QMC channel per DAI. The context used by QMC channel transfer (read and write) completion routines does not contains any QMC channel and the only one available per DAI is used to schedule the next transfer. This works pretty well with only one QMC channel per DAI. The future support for non-inlerleave mode will use several QMC channel per DAI. In that case, QMC channel transfer completion routines need to identify the QMC channel related to the completion. In order to fill this lack, even if identifying the current QMC channel among several QMC channels is not needed for the current code, add one indirection level and introduce the qmc_dai_chan data structrure. This structure contains the QMC channel involved in the completion and refererences to the runtime context (capture and playback) used by the DAI. Signed-off-by:
-
Herve Codina authored
The driver mixes some internal values for channel DMA buffer handling and PCM pointer handling. In the currently supported interleaved mode, this mix does not lead to any issues but in order to prepare the support for the non-interleaved mode, having them clearly separated will ease the support and avoid additional computation to convert values used in channel DMA buffer management in values usable for PCM pointer. Use a specific set of variable for PCM pointer handling and an other set for channel DMA buffer. Signed-off-by:
-
Herve Codina authored
./scripts/checkpatch.pl --strict --codespell detected several issues when running on the fsl_qmc_audio.c file: - CHECK: spaces preferred around that '*' (ctx:VxV) - CHECK: Alignment should match open parenthesis - CHECK: Comparison to NULL could be written "!prtd" - CHECK: spaces preferred around that '/' (ctx:VxV) - CHECK: Lines should not end with a '(' - CHECK: Please don't use multiple blank lines Some of them are present several times. Fix all of these issues without any functional changes. Signed-off-by: -
Herve Codina authored
devm_kasprintf() can return a NULL pointer on failure but this returned value is not checked. Fix this lack and check the returned value. Fixes: 075c7125 ("ASoC: fsl: Add support for QMC audio") Cc: stable@vger.kernel.org Signed-off-by:
-
- 03 Jul, 2024 13 commits
-
-
Javier Carrasco authored
`wsa884x_regmap_config` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20240703-sound-const-regmap_config-v1-9-2e379b0446a7@gmail.comSigned-off-by:
-
Javier Carrasco authored
`wsa883x_regmap_config` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`wsa881x_regmap_config` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`jz4760_codec_regmap_config` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`jz4760_codec_regmap_config` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`cs53l30_regmap` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`cs35l36_regmap` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`cs35l35_regmap` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`cs35l34_regmap` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Mark Brown authored
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>: These two commits set the upper limit of the Speaker Volume control to +12dB instead of +100dB. This should have been a simple 1-line change to the #define in the header file, but only the HDA cs35l56 driver is using this define. The ASoC cs35l56 driver was using hardcoded numbers instead of the header defines. So the first commit changes the ASoC driver to use the #defined constants. The second commit corrects the value of the constant.
-
Chancel Liu authored
In the current flow all interrupts are disabled in runtime suspend phase. However interrupts enablement only exists in fsl_xcvr_prepare(). After resume fsl_xcvr_prepare() may not be called so it will cause all interrupts still disabled even if resume from suspend. Interrupts should be explictily enabled after resume. Also, DPATH reset setting only exists in fsl_xcvr_prepare(). After resume from suspend DPATH should be reset otherwise there'll be channel swap issue. Signed-off-by:
Chancel Liu <chancel.liu@nxp.com> Acked-by:
Shengjiu Wang <shengjiu.wang@gmail.com> Link: https://patch.msgid.link/20240628094354.780720-1-chancel.liu@nxp.comSigned-off-by:
-
Richard Fitzgerald authored
Change CS35L56_MAIN_RENDER_USER_VOLUME_MAX to 48, to limit the maximum value of the Speaker Volume control to +12dB. The minimum value is unchanged so that the default 0dB has the same integer control value. The original maximum of 400 (+100dB) was the largest value that can be mathematically handled by the DSP. The actual maximum amplification is +12dB. Signed-off-by:
Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://patch.msgid.link/20240703095517.208077-3-rf@opensource.cirrus.comSigned-off-by:
-
Richard Fitzgerald authored
The "Speaker Volume" control was being defined using four hardcoded magic numbers. There are #defines in the cs35l56.h header for these numbers, so change the code to use the defined constants. Signed-off-by:
-
- 02 Jul, 2024 21 commits
-
-
Rob Herring (Arm) authored
Replace the open-coded parsing of "reg" with of_property_read_reg(). The #ifdef is also easily replaced with IS_ENABLED(). Signed-off-by:
Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20240702215402.839673-1-robh@kernel.orgSigned-off-by:
-
Rob Herring (Arm) authored
Replace the open-coded parsing of "reg" with of_property_read_reg(). The #ifdef is also easily replaced with IS_ENABLED(). Signed-off-by:
-
Mark Brown authored
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>: Code used to create standalone and widget controls is mostly same, with with exception that in standalone case dynamic object needs to be registered and control created directly. Following patches clean up and unify kcontrol creation code in topology code.
-
Mark Brown authored
Merge series from Maxim Kochetkov <fido_max@inbox.ru>: nau8824 has external MCLK pin. So add enable/disable external clock management.
-
Animesh Agarwal authored
Convert the RT5650/RT5645 audio CODEC bindings to DT schema. Reviewed-by:
Animesh Agarwal <animeshagarwal28@gmail.com> Cc: Daniel Baluta <daniel.baluta@nxp.com> Link: https://patch.msgid.link/20240702120106.17100-1-animeshagarwal28@gmail.comSigned-off-by:
-
Amadeusz Sławiński authored
Code used to create standalone and widget enum control is same, with exception that in standalone case dynamic object needs to be registered and control created directly. Signed-off-by:
Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://patch.msgid.link/20240627101850.2191513-14-amadeuszx.slawinski@linux.intel.comSigned-off-by:
-
Amadeusz Sławiński authored
Code used to create standalone and widget mixer control is same, with exception that in standalone case dynamic object needs to be registered and control created directly. Signed-off-by:
-
Amadeusz Sławiński authored
Code used to create standalone and widget bytes control is same, with exception that in standalone case dynamic object needs to be registered and control created directly. Signed-off-by:
-
Amadeusz Sławiński authored
In preparation for following cleanups move functions around. Signed-off-by:
-
Amadeusz Sławiński authored
In following patches it will be reused to also create standalone kcontrol, so it makes sense to name it in more generic way. Signed-off-by:
-
Amadeusz Sławiński authored
soc_tplg_dbytes_create() missed se->dobj.index initialization, so add it there. Additionally separate dynamic object initialization into separate logical block code. Signed-off-by:
-
Amadeusz Sławiński authored
This aligns soc_tplg_denum_create() with soc_tplg_dapm_widget_denum_create(), as there is no reason for difference in behavior. Signed-off-by:
-
Amadeusz Sławiński authored
Minor cleanups to increase readability. Signed-off-by:
-
Amadeusz Sławiński authored
Minor cleanups to increase readability. Signed-off-by:
-
Amadeusz Sławiński authored
Minor cleanups to increase readability. Signed-off-by:
-
Amadeusz Sławiński authored
soc_tplg_denum_create_values() should properly set its values field. Signed-off-by:
-
Amadeusz Sławiński authored
Widget kcontrols do not need to be managed as topology dynamic objects with an index and a linked list. As they are always associated with a widget which is already a topology dynamic object, thus all addition/removals of a widget will by design manage the kcontrol. Signed-off-by:
-
Amadeusz Sławiński authored
Instead of using goto, when there is no controls, just do a loop when there are. Overall the check seems to be a bit redundant as num_kcontrols will only be above 0 if kcontrols are set anyway, but let's keep it, while simplifying code. Signed-off-by:
-
Richard Fitzgerald authored
Add a check to cs_dsp_coeff_write_ctrl() to abort if the control is not writeable. The cs_dsp code originated as an ASoC driver (wm_adsp) where all controls were exported as ALSA controls. It relied on ALSA to enforce the read-only permission. Now that the code has been separated from ALSA/ASoC it must perform its own permission check. This isn't currently causing any problems so there shouldn't be any need to backport this. If the client of cs_dsp exposes the control as an ALSA control, it should set permissions on that ALSA control to protect it. The few uses of cs_dsp_coeff_write_ctrl() inside drivers are for writable controls. Signed-off-by:
-
Maxim Kochetkov authored
Use master clock "mclk" if provided through device tree. Signed-off-by:
Maxim Kochetkov <fido_max@inbox.ru> Link: https://patch.msgid.link/20240701211631.92384-3-fido_max@inbox.ruSigned-off-by:
-
Maxim Kochetkov authored
Use master clock "mclk" if provided through device tree. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240701211631.92384-2-fido_max@inbox.ruSigned-off-by:
-
