- 05 Jul, 2017 40 commits
-
-
Christophe JAILLET authored
commit 95d7c1f1 upstream. It is wrong to iounmap resources in the normal path of davinci_pm_init() The 3 ioremap'ed fields of 'pm_config' can be accessed later on in other functions, so we should return 'success' instead of unrolling everything. Fixes: aa9aa1ec ("ARM: davinci: PM: rework init, remove platform device") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> [nsekhar@ti.com: commit message and minor style fixes] Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christophe JAILLET authored
commit f3f6cc81 upstream. If 'sram_alloc' fails, we need to free already allocated resources. Fixes: aa9aa1ec ("ARM: davinci: PM: rework init, remove platform device") Signed-off-by:
-
Doug Berger authored
commit 9e25ebfe upstream. The pmd containing memblock_limit is cleared by prepare_page_table() which creates the opportunity for early_alloc() to allocate unmapped memory if memblock_limit is not pmd aligned causing a boot-time hang. Commit 965278dc ("ARM: 8356/1: mm: handle non-pmd-aligned end of RAM") attempted to resolve this problem, but there is a path through the adjust_lowmem_bounds() routine where if all memory regions start and end on pmd-aligned addresses the memblock_limit will be set to arm_lowmem_limit. Since arm_lowmem_limit can be affected by the vmalloc early parameter, the value of arm_lowmem_limit may not be pmd-aligned. This commit corrects this oversight such that memblock_limit is always rounded down to pmd-alignment. Fixes: 965278dc ("ARM: 8356/1: mm: handle non-pmd-aligned end of RAM") Signed-off-by:
Doug Berger <opendmb@gmail.com> Suggested-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Lorenzo Pieralisi authored
commit cb7cf772 upstream. The BAD_MADT_GICC_ENTRY() macro checks if a GICC MADT entry passes muster from an ACPI specification standpoint. Current macro detects the MADT GICC entry length through ACPI firmware version (it changed from 76 to 80 bytes in the transition from ACPI 5.1 to ACPI 6.0 specification) but always uses (erroneously) the ACPICA (latest) struct (ie struct acpi_madt_generic_interrupt - that is 80-bytes long) length to check if the current GICC entry memory record exceeds the MADT table end in memory as defined by the MADT table header itself, which may result in false negatives depending on the ACPI firmware version and how the MADT entries are laid out in memory (ie on ACPI 5.1 firmware MADT GICC entries are 76 bytes long, so by adding 80 to a GICC entry start address in memory the resulting address may well be past the actual MADT end, triggering a false negative). Fix the BAD_MADT_GICC_ENTRY() macro by reshuffling the condition checks and update them to always use the firmware version specific MADT GICC entry length in order to carry out boundary checks. Fixes: b6cfb277 ("ACPI / ARM64: add BAD_MADT_GICC_ENTRY() macro") Reported-by:
Julien Grall <julien.grall@arm.com> Acked-by:
Will Deacon <will.deacon@arm.com> Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Julien Grall <julien.grall@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Al Stone <ahs3@redhat.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Timmy Li authored
commit 717902cc upstream. Commit 093d24a2 ("arm64: PCI: Manage controller-specific data on per-controller basis") added code to allocate ACPI PCI root_ops dynamically on a per host bridge basis but failed to update the corresponding memory allocation failure path in pci_acpi_scan_root() leading to a potential memory leakage. Fix it by adding the required kfree call. Fixes: 093d24a2 ("arm64: PCI: Manage controller-specific data on per-controller basis") Reviewed-by:
Tomasz Nowicki <tn@semihalf.com> Signed-off-by:
Timmy Li <lixiaoping3@huawei.com> [lorenzo.pieralisi@arm.com: refactored code, rewrote commit log] Signed-off-by:
-
Eric Anholt authored
commit fedf266f upstream. The bcm_kona_wdt_set_resolution_reg() call takes the spinlock, so initialize it earlier. Fixes a warning at boot with lock debugging enabled. Fixes: 6adb730d ("watchdog: bcm281xx: Watchdog Driver") Signed-off-by:
Eric Anholt <eric@anholt.net> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
-
Dan Carpenter authored
commit 1e3d0c2c upstream. There are some missing error codes here so we accidentally return NULL instead of an error pointer. It results in a NULL pointer dereference. Fixes: df71837d ("[LSM-IPSec]: Security association restriction.") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Dan Carpenter authored
commit e747f643 upstream. The default error code in pfkey_msg2xfrm_state() is -ENOBUFS. We added a new call to security_xfrm_state_alloc() which sets "err" to zero so there several places where we can return ERR_PTR(0) if kmalloc() fails. The caller is expecting error pointers so it leads to a NULL dereference. Fixes: df71837d ("[LSM-IPSec]: Security association restriction.") Signed-off-by:
-
Sabrina Dubroca authored
commit 9b3eb541 upstream. When CONFIG_XFRM_SUB_POLICY=y, xfrm_dst stores a copy of the flowi for that dst. Unfortunately, the code that allocates and fills this copy doesn't care about what type of flowi (flowi, flowi4, flowi6) gets passed. In multiple code paths (from raw_sendmsg, from TCP when replying to a FIN, in vxlan, geneve, and gre), the flowi that gets passed to xfrm is actually an on-stack flowi4, so we end up reading stuff from the stack past the end of the flowi4 struct. Since xfrm_dst->origin isn't used anywhere following commit ca116922 ("xfrm: Eliminate "fl" and "pol" args to xfrm_bundle_ok()."), just get rid of it. xfrm_dst->partner isn't used either, so get rid of that too. Fixes: 9d6ec938 ("ipv4: Use flowi4 in public route lookup interfaces.") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Hangbin Liu authored
commit 138437f5 upstream. Now we will force to do garbage collection if any policy removed in xfrm_policy_flush(). But during xfrm_net_exit(). We call flow_cache_fini() first and set set fc->percpu to NULL. Then after we call xfrm_policy_fini() -> frxm_policy_flush() -> flow_cache_flush(), we will get NULL pointer dereference when check percpu_empty. The code path looks like: flow_cache_fini() - fc->percpu = NULL xfrm_policy_fini() - xfrm_policy_flush() - xfrm_garbage_collect() - flow_cache_flush() - flow_cache_percpu_empty() - fcp = per_cpu_ptr(fc->percpu, cpu) To reproduce, just add ipsec in netns and then remove the netns. v2: As Xin Long suggested, since only two other places need to call it. move xfrm_garbage_collect() outside xfrm_policy_flush(). v3: Fix subject mismatch after v2 fix. Fixes: 35db0691 ("xfrm: do the garbage collection after flushing policy") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Reviewed-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Yossi Kuperman authored
commit 7c88e21a upstream. IPv6 payload length indicates the size of the payload, including any extension headers. In xfrm6_transport_finish, ipv6_hdr(skb)->payload_len is set to the payload size only, regardless of the presence of any extension headers. After ESP GRO transport mode decapsulation, ipv6_rcv trims the packet according to the wrong payload_len, thus corrupting the packet. Set payload_len to account for extension headers as well. Fixes: 7785bba2 ("esp: Add a software GRO codepath") Signed-off-by:
Yossi Kuperman <yossiku@mellanox.com> Signed-off-by:
-
Juergen Gross authored
commit 71df1d7c upstream. The be structure must not be freed when freeing the blkif structure isn't done. Otherwise a use-after-free of be when unmapping the ring used for communicating with the frontend will occur in case of a late call of xenblk_disconnect() (e.g. due to an I/O still active when trying to disconnect). Signed-off-by:
Juergen Gross <jgross@suse.com> Tested-by:
Steven Haigh <netwiz@crc.id.au> Acked-by:
Roger Pau Monné <roger.pau@citrix.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Ard Biesheuvel authored
commit 029c54b0 upstream. Existing code that uses vmalloc_to_page() may assume that any address for which is_vmalloc_addr() returns true may be passed into vmalloc_to_page() to retrieve the associated struct page. This is not un unreasonable assumption to make, but on architectures that have CONFIG_HAVE_ARCH_HUGE_VMAP=y, it no longer holds, and we need to ensure that vmalloc_to_page() does not go off into the weeds trying to dereference huge PUDs or PMDs as table entries. Given that vmalloc() and vmap() themselves never create huge mappings or deal with compound pages at all, there is no correct answer in this case, so return NULL instead, and issue a warning. When reading /proc/kcore on arm64, you will hit an oops as soon as you hit the huge mappings used for the various segments that make up the mapping of vmlinux. With this patch applied, you will no longer hit the oops, but the kcore contents willl be incorrect (these regions will be zeroed out) We are fixing this for kcore specifically, so it avoids vread() for those regions. At least one other problematic user exists, i.e., /dev/kmem, but that is currently broken on arm64 for other reasons. Link: http://lkml.kernel.org/r/20170609082226.26152-1-ard.biesheuvel@linaro.orgSigned-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by:
Laura Abbott <labbott@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: zhong jiang <zhongjiang@huawei.com> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Thomas Gleixner authored
commit ba714a9c upstream. The AMD pinctrl driver uses a chained interrupt to demultiplex the GPIO interrupts. Kevin Vandeventer reported, that his new AMD Ryzen locks up hard on boot when the AMD pinctrl driver is initialized. The reason is an interrupt storm. It's not clear whether that's caused by hardware or firmware or both. Using chained interrupts on X86 is a dangerous endavour. If a system is misconfigured or the hardware buggy there is no safety net to catch an interrupt storm. Convert the driver to use a regular interrupt for the demultiplex handler. This allows the interrupt storm detector to catch the malfunction and lets the system boot up. This should be backported to stable because it's likely that more users run into this problem as the AMD Ryzen machines are spreading. Reported-by: Kevin Vandeventer Link: https://bugzilla.suse.com/show_bug.cgi?id=1034261Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Baoquan He authored
commit fc5f9d5f upstream. Jeff Moyer reported that on his system with two memory regions 0~64G and 1T~1T+192G, and kernel option "memmap=192G!1024G" added, enabling KASLR will make the system hang intermittently during boot. While adding 'nokaslr' won't. The back trace is: Oops: 0000 [#1] SMP RIP: memcpy_erms() [ .... ] Call Trace: pmem_rw_page() bdev_read_page() do_mpage_readpage() mpage_readpages() blkdev_readpages() __do_page_cache_readahead() force_page_cache_readahead() page_cache_sync_readahead() generic_file_read_iter() blkdev_read_iter() __vfs_read() vfs_read() SyS_read() entry_SYSCALL_64_fastpath() This crash happens because the for loop count calculation in sync_global_pgds() is not correct. When a mapping area crosses PGD entries, we should calculate the starting address of region which next PGD covers and assign it to next for loop count, but not add PGDIR_SIZE directly. The old code works right only if the mapping area is an exact multiple of PGDIR_SIZE, otherwize the end region could be skipped so that it can't be synchronized to all other processes from kernel PGD init_mm.pgd. In Jeff's system, emulated pmem area [1024G, 1216G) is smaller than PGDIR_SIZE. While 'nokaslr' works because PAGE_OFFSET is 1T aligned, it makes this area be mapped inside one PGD entry. With KASLR enabled, this area could cross two PGD entries, then the next PGD entry won't be synced to all other processes. That is why we saw empty PGD. Fix it. Reported-by:
Jeff Moyer <jmoyer@redhat.com> Signed-off-by:
Baoquan He <bhe@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jinbum Park <jinb.park7@gmail.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Garnier <thgarnie@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yasuaki Ishimatsu <yasu.isimatu@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1493864747-8506-1-git-send-email-bhe@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Vallish Vaidyeshwara authored
commit 00a0ea33 upstream. process_prepared_discard_passdown_pt1() should cleanup dm_thin_new_mapping in cases of error. dm_pool_inc_data_range() can fail trying to get a block reference: metadata operation 'dm_pool_inc_data_range' failed: error = -61 When dm_pool_inc_data_range() fails, dm thin aborts current metadata transaction and marks pool as PM_READ_ONLY. Memory for thin mapping is released as well. However, current thin mapping will be queued onto next stage as part of queue_passdown_pt2() or passdown_endio(). This dangling thin mapping memory when processed and accessed in next stage will lead to device mapper crashing. Code flow without fix: -> process_prepared_discard_passdown_pt1(m) -> dm_thin_remove_range() -> discard passdown --> passdown_endio(m) queues m onto next stage -> dm_pool_inc_data_range() fails, frees memory m but does not remove it from next stage queue -> process_prepared_discard_passdown_pt2(m) -> processes freed memory m and crashes One such stack: Call Trace: [<ffffffffa037a46f>] dm_cell_release_no_holder+0x2f/0x70 [dm_bio_prison] [<ffffffffa039b6dc>] cell_defer_no_holder+0x3c/0x80 [dm_thin_pool] [<ffffffffa039b88b>] process_prepared_discard_passdown_pt2+0x4b/0x90 [dm_thin_pool] [<ffffffffa0399611>] process_prepared+0x81/0xa0 [dm_thin_pool] [<ffffffffa039e735>] do_worker+0xc5/0x820 [dm_thin_pool] [<ffffffff8152bf54>] ? __schedule+0x244/0x680 [<ffffffff81087e72>] ? pwq_activate_delayed_work+0x42/0xb0 [<ffffffff81089f53>] process_one_work+0x153/0x3f0 [<ffffffff8108a71b>] worker_thread+0x12b/0x4b0 [<ffffffff8108a5f0>] ? rescuer_thread+0x350/0x350 [<ffffffff8108fd6a>] kthread+0xca/0xe0 [<ffffffff8108fca0>] ? kthread_park+0x60/0x60 [<ffffffff81530b45>] ret_from_fork+0x25/0x30 The fix is to first take the block ref count for discarded block and then do a passdown discard of this block. If block ref count fails, then bail out aborting current metadata transaction, mark pool as PM_READ_ONLY and also free current thin mapping memory (existing error handling code) without queueing this thin mapping onto next stage of processing. If block ref count succeeds, then passdown discard of this block. Discard callback of passdown_endio() will queue this thin mapping onto next stage of processing. Code flow with fix: -> process_prepared_discard_passdown_pt1(m) -> dm_thin_remove_range() -> dm_pool_inc_data_range() --> if fails, free memory m and bail out -> discard passdown --> passdown_endio(m) queues m onto next stage Reviewed-by:
Eduardo Valentin <eduval@amazon.com> Reviewed-by:
Cristian Gafton <gafton@amazon.com> Reviewed-by:
Anchal Agarwal <anchalag@amazon.com> Signed-off-by:
Vallish Vaidyeshwara <vallish@amazon.com> Reviewed-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Deepak Rawat authored
commit 82fcee52 upstream. The hash table created during vmw_cmdbuf_res_man_create was never freed. This causes memory leak in context creation. Added the corresponding drm_ht_remove in vmw_cmdbuf_res_man_destroy. Tested for memory leak by running piglit overnight and kernel memory is not inflated which earlier was. Signed-off-by:
Deepak Rawat <drawat@vmware.com> Reviewed-by:
Sinclair Yeh <syeh@vmware.com> Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Kan Liang authored
commit 80c65fdb upstream. Should not init a NULL box. It will cause system crash. The issue looks like caused by a typo. This was not noticed because there is no NULL box. Also, for most boxes, they are enabled by default. The init code is not critical. Fixes: fff4b87e ("perf/x86/intel/uncore: Make package handling more robust") Signed-off-by:
Kan Liang <kan.liang@intel.com> Signed-off-by:
-
Vikas Shivappa authored
commit 79298acc upstream. If mount fails, the kn_info directory is not freed causing memory leak. Add the missing error handling path. Fixes: 4e978d06 ("x86/intel_rdt: Add "info" files to resctrl file system") Signed-off-by:
Vikas Shivappa <vikas.shivappa@linux.intel.com> Signed-off-by:
-
Bartosz Golaszewski authored
commit ad537b82 upstream. GPIOEVENT_REQUEST_BOTH_EDGES is not a single flag, but a binary OR of GPIOEVENT_REQUEST_RISING_EDGE and GPIOEVENT_REQUEST_FALLING_EDGE. The expression 'le->eflags & GPIOEVENT_REQUEST_BOTH_EDGES' we'll get evaluated to true even if only one event type was requested. Fix it by checking both RISING & FALLING flags explicitly. Fixes: 61f922db ("gpio: userspace ABI for reading GPIO line events") Signed-off-by:
Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by:
-
Miklos Szeredi authored
commit e85f82ff upstream. Nothing prevents mischief on upper layer while we are busy copying up the data. Move the lookup right before the looked up dentry is actually used. Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Fixes: 01ad3eb8 ("ovl: concurrent copy up of regular files") Signed-off-by:
-
Benjamin Coddington authored
commit d9f29500 upstream. This reverts commit 920b4530 which could call d_move() without holding the directory's i_mutex, and reverts commit d4ea7e3c "NFS: Fix old dentry rehash after move", which was a follow-up fix. Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Fixes: 920b4530 ("NFS: nfs_rename() handle -ERESTARTSYS dentry left behind") Reviewed-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Trond Myklebust authored
commit bd171930 upstream. If the task calling layoutget is signalled, then it is possible for the calls to nfs4_sequence_free_slot() and nfs4_layoutget_prepare() to race, in which case we leak a slot. The fix is to move the call to nfs4_sequence_free_slot() into the nfs4_layoutget_release() so that it gets called at task teardown time. Fixes: 2e80dbe7 ("NFSv4.1: Close callback races for OPEN, LAYOUTGET...") Signed-off-by:
-
Benjamin Coddington authored
commit 501e7a46 upstream. Now that we have umask support, we shouldn't re-send the mode in a SETATTR following an exclusive CREATE, or we risk having the same problem fixed in commit 5334c5bd ("NFS: Send attributes in OPEN request for NFS4_CREATE_EXCLUSIVE4_1"), which is that files with S_ISGID will have that bit stripped away. Signed-off-by:
-
Hui Wang authored
commit a8f20fd2 upstream. Recently we met a problem, the codec has valid adcs and input pins, and they can form valid input paths, but the driver does not build valid controls for them like "Mic boost", "Capture Volume" and "Capture Switch". Through debugging, I found the driver needs to shrink the invalid adcs and input paths for this machine, so it will move the whole column bitmap value to the previous column, after moving it, the driver forgets to set the original column bitmap value to zero, as a result, the driver will invalidate the path whose index value is the original colume bitmap value. After executing this function, all valid input paths are invalidated by a mistake, there are no any valid input paths, so the driver won't build controls for them. Fixes: 3a65bcdc ("ALSA: hda - Fix inconsistent input_paths after ADC reduction") Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit d94815f9 upstream. azx_codec_configure() loops over the codecs found on the given controller via a linked list. The code used to work in the past, but in the current version, this may lead to an endless loop when a codec binding returns an error. The culprit is that the snd_hda_codec_configure() unregisters the device upon error, and this eventually deletes the given codec object from the bus. Since the list is initialized via list_del_init(), the next object points to the same device itself. This behavior change was introduced at splitting the HD-audio code code, and forgotten to adapt it here. For fixing this bug, just use a *_safe() version of list iteration. Fixes: d068ebc2 ("ALSA: hda - Move some codes up to hdac_bus struct") Reported-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Paul Burton authored
commit d8550860 upstream. When the scheduler sets TIF_NEED_RESCHED & we call into the scheduler from arch/mips/kernel/entry.S we disable interrupts. This is true regardless of whether we reach work_resched from syscall_exit_work, resume_userspace or by looping after calling schedule(). Although we disable interrupts in these paths we don't call trace_hardirqs_off() before calling into C code which may acquire locks, and we therefore leave lockdep with an inconsistent view of whether interrupts are disabled or not when CONFIG_PROVE_LOCKING & CONFIG_DEBUG_LOCKDEP are both enabled. Without tracing this interrupt state lockdep will print warnings such as the following once a task returns from a syscall via syscall_exit_partial with TIF_NEED_RESCHED set: [ 49.927678] ------------[ cut here ]------------ [ 49.934445] WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:3687 check_flags.part.41+0x1dc/0x1e8 [ 49.946031] DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled) [ 49.946355] CPU: 0 PID: 1 Comm: init Not tainted 4.10.0-00439-gc9fd5d362289-dirty #197 [ 49.963505] Stack : 0000000000000000 ffffffff81bb5d6a 0000000000000006 ffffffff801ce9c4 [ 49.974431] 0000000000000000 0000000000000000 0000000000000000 000000000000004a [ 49.985300] ffffffff80b7e487 ffffffff80a24498 a8000000ff160000 ffffffff80ede8b8 [ 49.996194] 0000000000000001 0000000000000000 0000000000000000 0000000077c8030c [ 50.007063] 000000007fd8a510 ffffffff801cd45c 0000000000000000 a8000000ff127c88 [ 50.017945] 0000000000000000 ffffffff801cf928 0000000000000001 ffffffff80a24498 [ 50.028827] 0000000000000000 0000000000000001 0000000000000000 0000000000000000 [ 50.039688] 0000000000000000 a8000000ff127bd0 0000000000000000 ffffffff805509bc [ 50.050575] 00000000140084e0 0000000000000000 0000000000000000 0000000000040a00 [ 50.061448] 0000000000000000 ffffffff8010e1b0 0000000000000000 ffffffff805509bc [ 50.072327] ... [ 50.076087] Call Trace: [ 50.079869] [<ffffffff8010e1b0>] show_stack+0x80/0xa8 [ 50.086577] [<ffffffff805509bc>] dump_stack+0x10c/0x190 [ 50.093498] [<ffffffff8015dde0>] __warn+0xf0/0x108 [ 50.099889] [<ffffffff8015de34>] warn_slowpath_fmt+0x3c/0x48 [ 50.107241] [<ffffffff801c15b4>] check_flags.part.41+0x1dc/0x1e8 [ 50.114961] [<ffffffff801c239c>] lock_is_held_type+0x8c/0xb0 [ 50.122291] [<ffffffff809461b8>] __schedule+0x8c0/0x10f8 [ 50.129221] [<ffffffff80946a60>] schedule+0x30/0x98 [ 50.135659] [<ffffffff80106278>] work_resched+0x8/0x34 [ 50.142397] ---[ end trace 0cb4f6ef5b99fe21 ]--- [ 50.148405] possible reason: unannotated irqs-off. [ 50.154600] irq event stamp: 400463 [ 50.159566] hardirqs last enabled at (400463): [<ffffffff8094edc8>] _raw_spin_unlock_irqrestore+0x40/0xa8 [ 50.171981] hardirqs last disabled at (400462): [<ffffffff8094eb98>] _raw_spin_lock_irqsave+0x30/0xb0 [ 50.183897] softirqs last enabled at (400450): [<ffffffff8016580c>] __do_softirq+0x4ac/0x6a8 [ 50.195015] softirqs last disabled at (400425): [<ffffffff80165e78>] irq_exit+0x110/0x128 Fix this by using the TRACE_IRQS_OFF macro to call trace_hardirqs_off() when CONFIG_TRACE_IRQFLAGS is enabled. This is done before invoking schedule() following the work_resched label because: 1) Interrupts are disabled regardless of the path we take to reach work_resched() & schedule(). 2) Performing the tracing here avoids the need to do it in paths which disable interrupts but don't call out to C code before hitting a path which uses the RESTORE_SOME macro that will call trace_hardirqs_on() or trace_hardirqs_off() as appropriate. We call trace_hardirqs_on() using the TRACE_IRQS_ON macro before calling syscall_trace_leave() for similar reasons, ensuring that lockdep has a consistent view of state after we re-enable interrupts. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15385/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Paul Burton authored
commit 161c51cc upstream. We allocate memory for a ready_count variable per-CPU, which is accessed via a cached non-coherent TLB mapping to perform synchronisation between threads within the core using LL/SC instructions. In order to ensure that the variable is contained within its own data cache line we allocate 2 lines worth of memory & align the resulting pointer to a line boundary. This is however unnecessary, since kmalloc is guaranteed to return memory which is at least cache-line aligned (see ARCH_DMA_MINALIGN). Stop the redundant manual alignment. Besides cleaning up the code & avoiding needless work, this has the side effect of avoiding an arithmetic error found by Bryan on 64 bit systems due to the 32 bit size of the former dlinesz. This led the ready_count variable to have its upper 32b cleared erroneously for MIPS64 kernels, causing problems when ready_count was later used on MIPS64 via cpuidle. Signed-off-by:
Bryan O'Donoghue <bryan.odonoghue@imgtec.com> Reviewed-by:
-
James Hogan authored
commit 85423636 upstream. Since commit 81a76d71 ("MIPS: Avoid using unwind_stack() with usermode") show_backtrace() invokes the raw backtracer when cp0_status & ST0_KSU indicates user mode to fix issues on EVA kernels where user and kernel address spaces overlap. However this is used by show_stack() which creates its own pt_regs on the stack and leaves cp0_status uninitialised in most of the code paths. This results in the non deterministic use of the raw back tracer depending on the previous stack content. show_stack() deals exclusively with kernel mode stacks anyway, so explicitly initialise regs.cp0_status to KSU_KERNEL (i.e. 0) to ensure we get a useful backtrace. Fixes: 81a76d71 ("MIPS: Avoid using unwind_stack() with usermode") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16656/Signed-off-by:
-
Karl Beldan authored
commit 25d8b92e upstream. In this sequence the 'move' is assumed in the delay slot of the 'beq', but head.S is in reorder mode and the former gets pushed one 'nop' farther by the assembler. The corrected behavior made booting with an UHI supplied dtb erratic. Fixes: 15f37e15 ("MIPS: store the appended dtb address in a variable") Signed-off-by:
Karl Beldan <karl.beldan+oss@gmail.com> Reviewed-by:
-
Juergen Gross authored
commit a24fa22c upstream. There is no need to use xen_blkif_get()/xen_blkif_put() in the kthread of xen-blkback. Thread stopping is synchronous and using the blkif reference counting in the kthread will avoid to ever let the reference count drop to zero at the end of an I/O running concurrent to disconnecting and multiple rings. Setting ring->xenblkd to NULL after stopping the kthread isn't needed as the kthread does this already. Signed-off-by:
-
Kinglong Mee authored
commit df807fff upstream. As the comments for svc_set_num_threads() said, " Destroying threads relies on the service threads filling in rqstp->rq_task, which only the nfs ones do. Assumes the serv has been created using svc_create_pooled()." If creating service through svc_create(), the svc_pool_map_put() will be called in svc_destroy(), but the pool map isn't used. So that, the reference of pool map will be drop, the next using of pool map will get a zero npools. [ 137.992130] divide error: 0000 [#1] SMP [ 137.992148] Modules linked in: nfsd(E) nfsv4 nfs fscache fuse tun bridge stp llc ip_set nfnetlink vmw_vsock_vmci_transport vsock snd_seq_midi snd_seq_midi_event vmw_balloon coretemp crct10dif_pclmul crc32_pclmul ppdev ghash_clmulni_intel intel_rapl_perf joydev snd_ens1371 gameport snd_ac97_codec ac97_bus snd_seq snd_pcm snd_rawmidi snd_timer snd_seq_device snd soundcore parport_pc parport nfit acpi_cpufreq tpm_tis tpm_tis_core tpm vmw_vmci i2c_piix4 shpchp auth_rpcgss nfs_acl lockd(E) grace sunrpc(E) xfs libcrc32c vmwgfx drm_kms_helper ttm crc32c_intel drm e1000 mptspi scsi_transport_spi serio_raw mptscsih mptbase ata_generic pata_acpi [last unloaded: nfsd] [ 137.992336] CPU: 0 PID: 4514 Comm: rpc.nfsd Tainted: G E 4.11.0-rc8+ #536 [ 137.992777] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/02/2015 [ 137.993757] task: ffff955984101d00 task.stack: ffff9873c2604000 [ 137.994231] RIP: 0010:svc_pool_for_cpu+0x2b/0x80 [sunrpc] [ 137.994768] RSP: 0018:ffff9873c2607c18 EFLAGS: 00010246 [ 137.995227] RAX: 0000000000000000 RBX: ffff95598376f000 RCX: 0000000000000002 [ 137.995673] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9559944aec00 [ 137.996156] RBP: ffff9873c2607c18 R08: ffff9559944aec28 R09: 0000000000000000 [ 137.996609] R10: 0000000001080002 R11: 0000000000000000 R12: ffff95598376f010 [ 137.997063] R13: ffff95598376f018 R14: ffff9559944aec28 R15: ffff9559944aec00 [ 137.997584] FS: 00007f755529eb40(0000) GS:ffff9559bb600000(0000) knlGS:0000000000000000 [ 137.998048] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 137.998548] CR2: 000055f3aecd9660 CR3: 0000000084290000 CR4: 00000000001406f0 [ 137.999052] Call Trace: [ 137.999517] svc_xprt_do_enqueue+0xef/0x260 [sunrpc] [ 138.000028] svc_xprt_received+0x47/0x90 [sunrpc] [ 138.000487] svc_add_new_perm_xprt+0x76/0x90 [sunrpc] [ 138.000981] svc_addsock+0x14b/0x200 [sunrpc] [ 138.001424] ? recalc_sigpending+0x1b/0x50 [ 138.001860] ? __getnstimeofday64+0x41/0xd0 [ 138.002346] ? do_gettimeofday+0x29/0x90 [ 138.002779] write_ports+0x255/0x2c0 [nfsd] [ 138.003202] ? _copy_from_user+0x4e/0x80 [ 138.003676] ? write_recoverydir+0x100/0x100 [nfsd] [ 138.004098] nfsctl_transaction_write+0x48/0x80 [nfsd] [ 138.004544] __vfs_write+0x37/0x160 [ 138.004982] ? selinux_file_permission+0xd7/0x110 [ 138.005401] ? security_file_permission+0x3b/0xc0 [ 138.005865] vfs_write+0xb5/0x1a0 [ 138.006267] SyS_write+0x55/0xc0 [ 138.006654] entry_SYSCALL_64_fastpath+0x1a/0xa9 [ 138.007071] RIP: 0033:0x7f7554b9dc30 [ 138.007437] RSP: 002b:00007ffc9f92c788 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 138.007807] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f7554b9dc30 [ 138.008168] RDX: 0000000000000002 RSI: 00005640cd536640 RDI: 0000000000000003 [ 138.008573] RBP: 00007ffc9f92c780 R08: 0000000000000001 R09: 0000000000000002 [ 138.008918] R10: 0000000000000064 R11: 0000000000000246 R12: 0000000000000004 [ 138.009254] R13: 00005640cdbf77a0 R14: 00005640cdbf7720 R15: 00007ffc9f92c238 [ 138.009610] Code: 0f 1f 44 00 00 48 8b 87 98 00 00 00 55 48 89 e5 48 83 78 08 00 74 10 8b 05 07 42 02 00 83 f8 01 74 40 83 f8 02 74 19 31 c0 31 d2 <f7> b7 88 00 00 00 5d 89 d0 48 c1 e0 07 48 03 87 90 00 00 00 c3 [ 138.010664] RIP: svc_pool_for_cpu+0x2b/0x80 [sunrpc] RSP: ffff9873c2607c18 [ 138.011061] ---[ end trace b3468224cafa7d11 ]--- Signed-off-by:
Kinglong Mee <kinglongmee@gmail.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Eric Leblond authored
commit 87e94dbc upstream. This patch fixes the creation of connection tracking entry from netlink when synproxy is used. It was missing the addition of the synproxy extension. This was causing kernel crashes when a conntrack entry created by conntrackd was used after the switch of traffic from active node to the passive node. Signed-off-by:
Eric Leblond <eric@regit.org> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Serhey Popovych authored
[ Upstream commit db833d40 ] Network interface groups support added while ago, however there is no IFLA_GROUP attribute description in policy and netlink message size calculations until now. Add IFLA_GROUP attribute to the policy. Fixes: cbda10fa ("net_device: add support for network device groups") Signed-off-by:
Serhey Popovych <serhe.popovych@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Serhey Popovych authored
[ Upstream commit 07f61557 ] While commit 73ba57bf ("ipv6: fix backtracking for throw routes") does good job on error propagation to the fib_rules_lookup() in fib rules core framework that also corrects throw routes handling, it does not solve route reference leakage problem happened when we return -EAGAIN to the fib_rules_lookup() and leave routing table entry referenced in arg->result. If rule with matched throw route isn't last matched in the list we overwrite arg->result losing reference on throw route stored previously forever. We also partially revert commit ab997ad4 ("ipv6: fix the incorrect return value of throw route") since we never return routing table entry with dst.error == -EAGAIN when CONFIG_IPV6_MULTIPLE_TABLES is on. Also there is no point to check for RTF_REJECT flag since it is always set throw route. Fixes: 73ba57bf ("ipv6: fix backtracking for throw routes") Signed-off-by:
-
Gao Feng authored
[ Upstream commit 9745e362 ] The register_vlan_device would invoke free_netdev directly, when register_vlan_dev failed. It would trigger the BUG_ON in free_netdev if the dev was already registered. In this case, the netdev would be freed in netdev_run_todo later. So add one condition check now. Only when dev is not registered, then free it directly. The following is the part coredump when netdev_upper_dev_link failed in register_vlan_dev. I removed the lines which are too long. [ 411.237457] ------------[ cut here ]------------ [ 411.237458] kernel BUG at net/core/dev.c:7998! [ 411.237484] invalid opcode: 0000 [#1] SMP [ 411.237705] [last unloaded: 8021q] [ 411.237718] CPU: 1 PID: 12845 Comm: vconfig Tainted: G E 4.12.0-rc5+ #6 [ 411.237737] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/02/2015 [ 411.237764] task: ffff9cbeb6685580 task.stack: ffffa7d2807d8000 [ 411.237782] RIP: 0010:free_netdev+0x116/0x120 [ 411.237794] RSP: 0018:ffffa7d2807dbdb0 EFLAGS: 00010297 [ 411.237808] RAX: 0000000000000002 RBX: ffff9cbeb6ba8fd8 RCX: 0000000000001878 [ 411.237826] RDX: 0000000000000001 RSI: 0000000000000282 RDI: 0000000000000000 [ 411.237844] RBP: ffffa7d2807dbdc8 R08: 0002986100029841 R09: 0002982100029801 [ 411.237861] R10: 0004000100029980 R11: 0004000100029980 R12: ffff9cbeb6ba9000 [ 411.238761] R13: ffff9cbeb6ba9060 R14: ffff9cbe60f1a000 R15: ffff9cbeb6ba9000 [ 411.239518] FS: 00007fb690d81700(0000) GS:ffff9cbebb640000(0000) knlGS:0000000000000000 [ 411.239949] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 411.240454] CR2: 00007f7115624000 CR3: 0000000077cdf000 CR4: 00000000003406e0 [ 411.240936] Call Trace: [ 411.241462] vlan_ioctl_handler+0x3f1/0x400 [8021q] [ 411.241910] sock_ioctl+0x18b/0x2c0 [ 411.242394] do_vfs_ioctl+0xa1/0x5d0 [ 411.242853] ? sock_alloc_file+0xa6/0x130 [ 411.243465] SyS_ioctl+0x79/0x90 [ 411.243900] entry_SYSCALL_64_fastpath+0x1e/0xa9 [ 411.244425] RIP: 0033:0x7fb69089a357 [ 411.244863] RSP: 002b:00007ffcd04e0fc8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 411.245445] RAX: ffffffffffffffda RBX: 00007ffcd04e2884 RCX: 00007fb69089a357 [ 411.245903] RDX: 00007ffcd04e0fd0 RSI: 0000000000008983 RDI: 0000000000000003 [ 411.246527] RBP: 00007ffcd04e0fd0 R08: 0000000000000000 R09: 1999999999999999 [ 411.246976] R10: 000000000000053f R11: 0000000000000202 R12: 0000000000000004 [ 411.247414] R13: 00007ffcd04e1128 R14: 00007ffcd04e2888 R15: 0000000000000001 [ 411.249129] RIP: free_netdev+0x116/0x120 RSP: ffffa7d2807dbdb0 Signed-off-by:
Gao Feng <gfree.wind@vip.163.com> Signed-off-by:
-
Wei Wang authored
[ Upstream commit 76371d2e ] In the existing dn_route.c code, dn_route_output_slow() takes dst->__refcnt before calling dn_insert_route() while dn_route_input_slow() does not take dst->__refcnt before calling dn_insert_route(). This makes the whole routing code very buggy. In dn_dst_check_expire(), dnrt_free() is called when rt expires. This makes the routes inserted by dn_route_output_slow() not able to be freed as the refcnt is not released. In dn_dst_gc(), dnrt_drop() is called to release rt which could potentially cause the dst->__refcnt to be dropped to -1. In dn_run_flush(), dst_free() is called to release all the dst. Again, it makes the dst inserted by dn_route_output_slow() not able to be released and also, it does not wait on the rcu and could potentially cause crash in the path where other users still refer to this dst. This patch makes sure both input and output path do not take dst->__refcnt before calling dn_insert_route() and also makes sure dnrt_free()/dst_free() is called when removing dst from the hash table. The only difference between those 2 calls is that dnrt_free() waits on the rcu while dst_free() does not. Signed-off-by:
Wei Wang <weiwan@google.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
-
Maor Dickman authored
[ Upstream commit f0b38117 ] Misuse of (BIT) macro caused to report wrong flags for "Hardware Transmit Timestamp Modes" and "Hardware Receive Filter Modes" Fixes: ef9814de ('net/mlx5e: Add HW timestamping (TS) support') Signed-off-by:
Maor Dickman <maord@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Eli Cohen authored
[ Upstream commit 6c780a02 ] Before attempting to initialize the command interface we must wait till the fw_initializing bit is clear. If we fail to meet this condition the hardware will drop our configuration, specifically the descriptors page address. This scenario can happen when the firmware is still executing an FLR flow and did not finish yet so the driver needs to wait for that to finish. Fixes: e3297246 ('net/mlx5_core: Wait for FW readiness on startup') Signed-off-by:
Eli Cohen <eli@mellanox.com> Signed-off-by:
-
Or Gerlitz authored
[ Upstream commit 31ac9338 ] The error flow of mlx5e_create_netdev calls the cleanup call of the given profile without checking if it exists, fix that. Currently the VF reps don't register that callback and we crash if getting into error -- can be reproduced by the user doing ctrl^C while attempting to change the sriov mode from legacy to switchdev. Fixes: 26e59d80 '(net/mlx5e: Implement mlx5e interface attach/detach callbacks') Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Reported-by:
Sabrina Dubroca <sdubroca@redhat.com> Signed-off-by:
-
