- 16 Feb, 2018 1 commit
-
-
Dominik Bozek authored
ACM driver may accept data to transmit while system is not fully resumed. In this case ACM driver buffers data and prepare URBs on usb anchor list. There is a little chance that two tasks put a char and initiate acm_tty_flush_chars(). In such a case, driver will put one URB twice on usb anchor list. This patch also reset length of data before resue of a buffer. This not only prevent sending rubbish, but also lower risc of race. Without this patch we hit following kernel panic in one of our stabilty/stress tests. [ 46.884442] *list_add double add*: new=ffff9b2ab7289330, prev=ffff9b2ab7289330, next=ffff9b2ab81e28e0. [ 46.884476] Modules linked in: hci_uart btbcm bluetooth rfkill_gpio igb_avb(O) cfg80211 snd_soc_sst_bxt_tdf8532 snd_soc_skl snd_soc_skl_ipc snd_soc_sst_ipc snd_soc_sst_dsp snd_soc_sst_acpi snd_soc_sst_match snd_hda_ext_core snd_hda_core trusty_timer trusty_wall trusty_log trusty_virtio trusty_ipc trusty_mem trusty_irq trusty virtio_ring virtio intel_ipu4_mmu_bxtB0 lib2600_mod_bxtB0 intel_ipu4_isys_mod_bxtB0 lib2600psys_mod_bxtB0 intel_ipu4_psys_mod_bxtB0 intel_ipu4_mod_bxtB0 intel_ipu4_wrapper_bxtB0 intel_ipu4_acpi videobuf2_dma_contig as3638 dw9714 lm3643 crlmodule smiapp smiapp_pll [ 46.884480] CPU: 1 PID: 33 Comm: kworker/u8:1 Tainted: G U W O 4.9.56-quilt-2e5dc0ac-g618ed69ced6e-dirty #4 [ 46.884489] Workqueue: events_unbound flush_to_ldisc [ 46.884494] ffffb98ac012bb08 ffffffffad3e82e5 ffffb98ac012bb58 0000000000000000 [ 46.884497] ffffb98ac012bb48 ffffffffad0a23d1 00000024ad6374dd ffff9b2ab7289330 [ 46.884500] ffff9b2ab81e28e0 ffff9b2ab7289330 0000000000000002 0000000000000000 [ 46.884501] Call Trace: [ 46.884507] [<ffffffffad3e82e5>] dump_stack+0x67/0x92 [ 46.884511] [<ffffffffad0a23d1>] __warn+0xd1/0xf0 [ 46.884513] [<ffffffffad0a244f>] warn_slowpath_fmt+0x5f/0x80 [ 46.884516] [<ffffffffad407443>] __list_add+0xb3/0xc0 [ 46.884521] [<ffffffffad71133c>] *usb_anchor_urb*+0x4c/0xa0 [ 46.884524] [<ffffffffad782c6f>] *acm_tty_flush_chars*+0x8f/0xb0 [ 46.884527] [<ffffffffad782cd1>] *acm_tty_put_char*+0x41/0x100 [ 46.884530] [<ffffffffad4ced34>] tty_put_char+0x24/0x40 [ 46.884533] [<ffffffffad4d3bf5>] do_output_char+0xa5/0x200 [ 46.884535] [<ffffffffad4d3e98>] __process_echoes+0x148/0x290 [ 46.884538] [<ffffffffad4d654c>] n_tty_receive_buf_common+0x57c/0xb00 [ 46.884541] [<ffffffffad4d6ae4>] n_tty_receive_buf2+0x14/0x20 [ 46.884543] [<ffffffffad4d9662>] tty_ldisc_receive_buf+0x22/0x50 [ 46.884545] [<ffffffffad4d9c05>] flush_to_ldisc+0xc5/0xe0 [ 46.884549] [<ffffffffad0bcfe8>] process_one_work+0x148/0x440 [ 46.884551] [<ffffffffad0bdc19>] worker_thread+0x69/0x4a0 [ 46.884554] [<ffffffffad0bdbb0>] ? max_active_store+0x80/0x80 [ 46.884556] [<ffffffffad0c2e10>] kthread+0x110/0x130 [ 46.884559] [<ffffffffad0c2d00>] ? kthread_park+0x60/0x60 [ 46.884563] [<ffffffffadad9917>] ret_from_fork+0x27/0x40 [ 46.884566] ---[ end trace 3bd599058b8a9eb3 ]--- Signed-off-by:
Dominik Bozek <dominikx.bozek@intel.com> Signed-off-by:
Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Acked-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 15 Feb, 2018 15 commits
-
-
Jack Stocker authored
Following on from this patch: https://lkml.org/lkml/2017/11/3/516, Corsair K70 RGB keyboards also require the DELAY_INIT quirk to start correctly at boot. Device ids found here: usb 3-3: New USB device found, idVendor=1b1c, idProduct=1b13 usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-3: Product: Corsair K70 RGB Gaming Keyboard Signed-off-by:
Jack Stocker <jackstocker.93@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
AMAN DEEP authored
usb: ohci: Proper handling of ed_rm_list to handle race condition between usb_kill_urb() and finish_unlinks() There is a race condition between finish_unlinks->finish_urb() function and usb_kill_urb() in ohci controller case. The finish_urb calls spin_unlock(&ohci->lock) before usb_hcd_giveback_urb() function call, then if during this time, usb_kill_urb is called for another endpoint, then new ed will be added to ed_rm_list at beginning for unlink, and ed_rm_list will point to newly added. When finish_urb() is completed in finish_unlinks() and ed->td_list becomes empty as in below code (in finish_unlinks() function): if (list_empty(&ed->td_list)) { *last = ed->ed_next; ed->ed_next = NULL; } else if (ohci->rh_state == OHCI_RH_RUNNING) { *last = ed->ed_next; ed->ed_next = NULL; ed_schedule(ohci, ed); } The *last = ed->ed_next will make ed_rm_list to point to ed->ed_next and previously added ed by usb_kill_urb will be left unreferenced by ed_rm_list. This causes usb_kill_urb() hang forever waiting for finish_unlink to remove added ed from ed_rm_list. The main reason for hang in this race condtion is addition and removal of ed from ed_rm_list in the beginning during usb_kill_urb and later last* is modified in finish_unlinks(). As suggested by Alan Stern, the solution for proper handling of ohci->ed_rm_list is to remove ed from the ed_rm_list before finishing any URBs. Then at the end, we can add ed back to the list if necessary. This properly handle the updated ohci->ed_rm_list in usb_kill_urb(). Fixes: 977dcfdc ("USB: OHCI: don't lose track of EDs when a controller dies") Acked-by:Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by:
Aman Deep <aman.deep@samsung.com> Signed-off-by:
Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by:
-
Peter Chen authored
At former code, the SETUP stage does not enable interrupt for qtd completion, it relies on IAA watchdog to complete interrupt, then the transcation would be considered timeout if the flag need_io_watchdog is cleared by platform code. In this commit, we always add enable interrupt for qtd completion, then the qtd completion can be notified by hardware interrupt. Signed-off-by:
Peter Chen <peter.chen@nxp.com> Acked-by:
-
Karsten Koop authored
This patch adds support for new CASSY devices to the ldusb driver. The PIDs are also added to the ignore list in hid-quirks. Signed-off-by:
Karsten Koop <kkoop@ld-didactic.de> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Yoshihiro Shimoda authored
This fixes an issue that a gadget driver (usb_f_fs) is possible to stop rx transactions after the usb-dmac is used because the following functions missed to set/check the "running" flag. - usbhsf_dma_prepare_pop_with_usb_dmac() - usbhsf_dma_pop_done_with_usb_dmac() So, if next transaction uses pio, the usbhsf_prepare_pop() can not start the transaction because the "running" flag is 0. Fixes: 8355b2b3 ("usb: renesas_usbhs: fix the behavior of some usbhs_pkt_handle") Cc: <stable@vger.kernel.org> # v3.19+ Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
-
Peter Chen authored
commit a8c06e40 ("usb: separate out sysdev pointer from usb_bus") converted to use hcd->self.sysdev for DMA operations instead of hcd->self.controller, but forgot to do it for hcd test mode. Replace the correct one in this commit. Fixes: a8c06e40 ("usb: separate out sysdev pointer from usb_bus") Signed-off-by:
-
Shuah Khan authored
Keep usbip_device sockfd state in sync with tcp_socket. When tcp_socket is reset to null, reset sockfd to -1 to keep it in sync. Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Shigeru Yoshida authored
Running io_watchdog_func() while ohci_urb_enqueue() is running can cause a race condition where ohci->prev_frame_no is corrupted and the watchdog can mis-detect following error: ohci-platform 664a0800.usb: frame counter not updating; disabled ohci-platform 664a0800.usb: HC died; cleaning up Specifically, following scenario causes a race condition: 1. ohci_urb_enqueue() calls spin_lock_irqsave(&ohci->lock, flags) and enters the critical section 2. ohci_urb_enqueue() calls timer_pending(&ohci->io_watchdog) and it returns false 3. ohci_urb_enqueue() sets ohci->prev_frame_no to a frame number read by ohci_frame_no(ohci) 4. ohci_urb_enqueue() schedules io_watchdog_func() with mod_timer() 5. ohci_urb_enqueue() calls spin_unlock_irqrestore(&ohci->lock, flags) and exits the critical section 6. Later, ohci_urb_enqueue() is called 7. ohci_urb_enqueue() calls spin_lock_irqsave(&ohci->lock, flags) and enters the critical section 8. The timer scheduled on step 4 expires and io_watchdog_func() runs 9. io_watchdog_func() calls spin_lock_irqsave(&ohci->lock, flags) and waits on it because ohci_urb_enqueue() is already in the critical section on step 7 10. ohci_urb_enqueue() calls timer_pending(&ohci->io_watchdog) and it returns false 11. ohci_urb_enqueue() sets ohci->prev_frame_no to new frame number read by ohci_frame_no(ohci) because the frame number proceeded between step 3 and 6 12. ohci_urb_enqueue() schedules io_watchdog_func() with mod_timer() 13. ohci_urb_enqueue() calls spin_unlock_irqrestore(&ohci->lock, flags) and exits the critical section, then wake up io_watchdog_func() which is waiting on step 9 14. io_watchdog_func() enters the critical section 15. io_watchdog_func() calls ohci_frame_no(ohci) and set frame_no variable to the frame number 16. io_watchdog_func() compares frame_no and ohci->prev_frame_no On step 16, because this calling of io_watchdog_func() is scheduled on step 4, the frame number set in ohci->prev_frame_no is expected to the number set on step 3. However, ohci->prev_frame_no is overwritten on step 11. Because step 16 is executed soon after step 11, the frame number might not proceed, so ohci->prev_frame_no must equals to frame_no. To address above scenario, this patch introduces a special sentinel value IO_WATCHDOG_OFF and set this value to ohci->prev_frame_no when the watchdog is not pending or running. When ohci_urb_enqueue() schedules the watchdog (step 4 and 12 above), it compares ohci->prev_frame_no to IO_WATCHDOG_OFF so that ohci->prev_frame_no is not overwritten while io_watchdog_func() is running. Signed-off-by:Shigeru Yoshida <Shigeru.Yoshida@windriver.com> Signed-off-by:
Haiqing Bai <Haiqing.Bai@windriver.com> Acked-by:
-
Kristian Evensen authored
The Quectel EP06 is a Cat. 6 LTE modem, and the interface mapping is as follows: 0: Diag 1: NMEA 2: AT 3: Modem Interface 4 is QMI and interface 5 is ADB, so they are blacklisted. This patch should also be considered for -stable. The QMI-patch for this modem is already in the -stable-queue. v1->v2: * Updated commit prefix (thanks Johan Hovold) * Updated commit message slightly. Signed-off-by:
Kristian Evensen <kristian.evensen@gmail.com> Acked-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Zhengjun Xing authored
In function xhci_stop, xhci_debugfs_exit called before xhci_mem_cleanup. xhci_debugfs_exit removed the xhci debugfs root nodes, xhci_mem_cleanup called function xhci_free_virt_devices_depth_first which in turn called function xhci_debugfs_remove_slot. Function xhci_debugfs_remove_slot removed the nodes for devices, the nodes folders are sub folder of xhci debugfs. It is unreasonable to remove xhci debugfs root folder before xhci debugfs sub folder. Function xhci_mem_cleanup should be called before function xhci_debugfs_exit. Fixes: 02b6fdc2 ("usb: xhci: Add debugfs interface for xHCI driver") Cc: <stable@vger.kernel.org> # v4.15 Signed-off-by:
Zhengjun Xing <zhengjun.xing@linux.intel.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Zhengjun Xing authored
There is a bug after plugged out USB device, the device and its ep00 nodes are still kept, we need to remove the nodes in xhci_free_dev when USB device is plugged out. Fixes: 052f71e2 ("xhci: Fix xhci debugfs NULL pointer dereference in resume from hibernate") Cc: <stable@vger.kernel.org> # v4.15 Signed-off-by:
-
Zhengjun Xing authored
During system resume from hibernation, xhci host is reset, all the nodes in devices folder are removed in xhci_mem_cleanup function. Later nodes in /sys/kernel/debug/usb/xhci/* are created again in function xhci_run, but the nodes already exist, so the nodes still keep the old ones, finally device nodes in xhci debugfs folder /sys/kernel/debug/usb/xhci/*/devices/* are disappeared. This fix removed xhci debugfs nodes before the nodes are re-created, so all the nodes in xhci debugfs can be re-created successfully. Fixes: 02b6fdc2 ("usb: xhci: Add debugfs interface for xHCI driver") Cc: <stable@vger.kernel.org> # v4.15 Signed-off-by:
-
Zhengjun Xing authored
Commit dde63405 ("xhci: Fix use-after-free in xhci debugfs") causes a null pointer dereference while fixing xhci-debugfs usage of ring pointers that were freed during hibernate. The fix passed addresses to ring pointers instead, but forgot to do this change for the xhci_ring_trb_show function. The address of the ring pointer passed to xhci-debugfs was of a temporary ring pointer "new_ring" instead of the actual ring "ring" pointer. The temporary new_ring pointer will be set to NULL later causing the NULL pointer dereference. This issue was seen when reading xhci related files in debugfs: cat /sys/kernel/debug/usb/xhci/*/devices/*/ep*/trbs [ 184.604861] BUG: unable to handle kernel NULL pointer dereference at (null) [ 184.613776] IP: xhci_ring_trb_show+0x3a/0x890 [ 184.618733] PGD 264193067 P4D 264193067 PUD 263238067 PMD 0 [ 184.625184] Oops: 0000 [#1] SMP [ 184.726410] RIP: 0010:xhci_ring_trb_show+0x3a/0x890 [ 184.731944] RSP: 0018:ffffba8243c0fd90 EFLAGS: 00010246 [ 184.737880] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000000000295d6 [ 184.746020] RDX: 00000000000295d5 RSI: 0000000000000001 RDI: ffff971a6418d400 [ 184.754121] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 184.762222] R10: ffff971a64c98a80 R11: ffff971a62a00e40 R12: ffff971a62a85500 [ 184.770325] R13: 0000000000020000 R14: ffff971a6418d400 R15: ffff971a6418d400 [ 184.778448] FS: 00007fe725a79700(0000) GS:ffff971a6ec00000(0000) knlGS:0000000000000000 [ 184.787644] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 184.794168] CR2: 0000000000000000 CR3: 000000025f365005 CR4: 00000000003606f0 [ 184.802318] Call Trace: [ 184.805094] ? seq_read+0x281/0x3b0 [ 184.809068] seq_read+0xeb/0x3b0 [ 184.812735] full_proxy_read+0x4d/0x70 [ 184.817007] __vfs_read+0x23/0x120 [ 184.820870] vfs_read+0x91/0x130 [ 184.824538] SyS_read+0x42/0x90 [ 184.828106] entry_SYSCALL_64_fastpath+0x1a/0x7d Fixes: dde63405 ("xhci: Fix use-after-free in xhci debugfs") Cc: <stable@vger.kernel.org> # v4.15 Signed-off-by:
-
Mathias Nyman authored
When disabling a USB3 port the hub driver will set the port link state to U3 to prevent "ejected" or "safely removed" devices that are still physically connected from immediately re-enumerating. If the device was really unplugged, then error messages were printed as the hub tries to set the U3 link state for a port that is no longer enabled. xhci-hcd ee000000.usb: Cannot set link state. usb usb8-port1: cannot disable (err = -32) Don't print error message in xhci-hub if hub tries to set port link state for a disabled port. Return -ENODEV instead which also silences hub driver. Signed-off-by:
-
Joe Lee authored
For AMD Promontory xHCI host, although you can disable USB ports in BIOS settings, those ports will be enabled anyway after you remove a device on that port and re-plug it in again. It's a known limitation of the chip. As a workaround we can clear the PORT_WAKE_BITS. [commit and code comment rephrasing -Mathias] Signed-off-by:
Joe Lee <asmt.swfae@gmail.com> Signed-off-by:
-
- 11 Feb, 2018 9 commits
-
-
Linus Torvalds authored
-
Al Viro authored
except, again, POLLFREE and POLL_BUSY_LOOP. With this, we finally get to the promised end result: - POLL{IN,OUT,...} are plain integers and *not* in __poll_t, so any stray instances of ->poll() still using those will be caught by sparse. - eventpoll.c and select.c warning-free wrt __poll_t - no more kernel-side definitions of POLL... - userland ones are visible through the entire kernel (and used pretty much only for mangle/demangle) - same behavior as after the first series (i.e. sparc et.al. epoll(2) working correctly). Signed-off-by:Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull more poll annotation updates from Al Viro: "This is preparation to solving the problems you've mentioned in the original poll series. After this series, the kernel is ready for running for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done as a for bulk search-and-replace. After that, the kernel is ready to apply the patch to unify {de,}mangle_poll(), and then get rid of kernel-side POLL... uses entirely, and we should be all done with that stuff. Basically, that's what you suggested wrt KPOLL..., except that we can use EPOLL... instead - they already are arch-independent (and equal to what is currently kernel-side POLL...). After the preparations (in this series) switch to returning EPOLL... from ->poll() instances is completely mechanical and kernel-side POLL... can go away. The last step (killing kernel-side POLL... and unifying {de,}mangle_poll() has to be done after the search-and-replace job, since we need userland-side POLL... for unified {de,}mangle_poll(), thus the cherry-pick at the last step. After that we will have: - POLL{IN,OUT,...} *not* in __poll_t, so any stray instances of ->poll() still using those will be caught by sparse. - eventpoll.c and select.c warning-free wrt __poll_t - no more kernel-side definitions of POLL... - userland ones are visible through the entire kernel (and used pretty much only for mangle/demangle) - same behavior as after the first series (i.e. sparc et.al. epoll(2) working correctly)" * 'work.poll2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: annotate ep_scan_ready_list() ep_send_events_proc(): return result via esed->res preparation to switching ->poll() to returning EPOLL... add EPOLLNVAL, annotate EPOLL... and event_poll->event use linux/poll.h instead of asm/poll.h xen: fix poll misannotation smc: missing poll annotations -
git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds authored
Pull xtense fix from Max Filippov: "Build fix for xtensa architecture with KASAN enabled" * tag 'xtensa-20180211' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: fix build with KASAN
-
git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2Linus Torvalds authored
Pull nios2 update from Ley Foon Tan: - clean up old Kconfig options from defconfig - remove leading 0x and 0s from bindings notation in dts files * tag 'nios2-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: nios2: defconfig: Cleanup from old Kconfig options nios2: dts: Remove leading 0x and 0s from bindings notation
-
Max Filippov authored
The commit 917538e2 ("kasan: clean up KASAN_SHADOW_SCALE_SHIFT usage") removed KASAN_SHADOW_SCALE_SHIFT definition from include/linux/kasan.h and added it to architecture-specific headers, except for xtensa. This broke the xtensa build with KASAN enabled. Define KASAN_SHADOW_SCALE_SHIFT in arch/xtensa/include/asm/kasan.h Reported by: kbuild test robot <fengguang.wu@intel.com> Fixes: 917538e2 ("kasan: clean up KASAN_SHADOW_SCALE_SHIFT usage") Acked-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com>
-
Krzysztof Kozlowski authored
Remove old, dead Kconfig option INET_LRO. It is gone since commit 7bbf3cae ("ipv4: Remove inet_lro library"). Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Acked-by:
Ley Foon Tan <ley.foon.tan@intel.com>
-
Mathieu Malaterre authored
Improve the DTS files by removing all the leading "0x" and zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading "0x" and Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -E -i -e "s/@0x([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" -e "s/@0+([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" {} + For simplicity, two sed expressions were used to solve each warnings separately. To make the regex expression more robust a few other issues were resolved, namely setting unit-address to lower case, and adding a whitespace before the the opening curly brace: https://elinux.org/Device_Tree_Linux#Linux_conventions This is a follow up to commit 4c9847b7 ("dt-bindings: Remove leading 0x from bindings notation") Reported-by:David Daney <ddaney@caviumnetworks.com> Suggested-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Mathieu Malaterre <malat@debian.org> Acked-by:
-
- 10 Feb, 2018 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fix from Bjorn Helgaas: "Fix a POWER9/powernv INTx regression from the merge window (Alexey Kardashevskiy)" * tag 'pci-v4.16-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: powerpc/pci: Fix broken INTx configuration via OF
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A few fixes to round off the merge window on the block side: - a set of bcache fixes by way of Michael Lyle, from the usual bcache suspects. - add a simple-to-hook-into function for bpf EIO error injection. - fix blk-wbt that mischarectized flushes as reads. Improve the logic so that flushes and writes are accounted as writes, and only reads as reads. From me. - fix requeue crash in BFQ, from Paolo" * tag 'for-linus-20180210' of git://git.kernel.dk/linux-block: block, bfq: add requeue-request hook bcache: fix for data collapse after re-attaching an attached device bcache: return attach error when no cache set exist bcache: set writeback_rate_update_seconds in range [1, 60] seconds bcache: fix for allocator and register thread race bcache: set error_limit correctly bcache: properly set task state in bch_writeback_thread() bcache: fix high CPU occupancy during journal bcache: add journal statistic block: Add should_fail_bio() for bpf error injection blk-wbt: account flush requests correctly -
git://github.com/dvhart/linux-pdx86Linus Torvalds authored
Pull x86 platform driver updates from Darren Hart: "Mellanox fixes and new system type support. Mostly data for new system types with a correction and an uninitialized variable fix" [ Pulling from github because git.infradead.org currently seems to be down for some reason, but Darren had a backup location - Linus ] * tag 'platform-drivers-x86-v4.16-3' of git://github.com/dvhart/linux-pdx86: platform/x86: mlx-platform: Add support for new 200G IB and Ethernet systems platform/x86: mlx-platform: Add support for new msn201x system type platform/x86: mlx-platform: Add support for new msn274x system type platform/x86: mlx-platform: Fix power cable setting for msn21xx family platform/x86: mlx-platform: Add define for the negative bus platform/x86: mlx-platform: Use defines for bus assignment platform/mellanox: mlxreg-hotplug: Fix uninitialized variable
-
Linus Torvalds authored
Merge tag 'chrome-platform-for-linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform Pull chrome platform updates from Benson Leung: - move cros_ec_dev to drivers/mfd - other small maintenance fixes [ The cros_ec_dev movement came in earlier through the MFD tree - Linus ] * tag 'chrome-platform-for-linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform: platform/chrome: Use proper protocol transfer function platform/chrome: cros_ec_lpc: Add support for Google Glimmer platform/chrome: cros_ec_lpc: Register the driver if ACPI entry is missing. platform/chrome: cros_ec_lpc: remove redundant pointer request cros_ec: fix nul-termination for firmware build info platform/chrome: chromeos_laptop: make chromeos_laptop const
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM updates from Radim Krčmář: "ARM: - icache invalidation optimizations, improving VM startup time - support for forwarded level-triggered interrupts, improving performance for timers and passthrough platform devices - a small fix for power-management notifiers, and some cosmetic changes PPC: - add MMIO emulation for vector loads and stores - allow HPT guests to run on a radix host on POWER9 v2.2 CPUs without requiring the complex thread synchronization of older CPU versions - improve the handling of escalation interrupts with the XIVE interrupt controller - support decrement register migration - various cleanups and bugfixes. s390: - Cornelia Huck passed maintainership to Janosch Frank - exitless interrupts for emulated devices - cleanup of cpuflag handling - kvm_stat counter improvements - VSIE improvements - mm cleanup x86: - hypervisor part of SEV - UMIP, RDPID, and MSR_SMI_COUNT emulation - paravirtualized TLB shootdown using the new KVM_VCPU_PREEMPTED bit - allow guests to see TOPOEXT, GFNI, VAES, VPCLMULQDQ, and more AVX512 features - show vcpu id in its anonymous inode name - many fixes and cleanups - per-VCPU MSR bitmaps (already merged through x86/pti branch) - stable KVM clock when nesting on Hyper-V (merged through x86/hyperv)" * tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (197 commits) KVM: PPC: Book3S: Add MMIO emulation for VMX instructions KVM: PPC: Book3S HV: Branch inside feature section KVM: PPC: Book3S HV: Make HPT resizing work on POWER9 KVM: PPC: Book3S HV: Fix handling of secondary HPTEG in HPT resizing code KVM: PPC: Book3S PR: Fix broken select due to misspelling KVM: x86: don't forget vcpu_put() in kvm_arch_vcpu_ioctl_set_sregs() KVM: PPC: Book3S PR: Fix svcpu copying with preemption enabled KVM: PPC: Book3S HV: Drop locks before reading guest memory kvm: x86: remove efer_reload entry in kvm_vcpu_stat KVM: x86: AMD Processor Topology Information x86/kvm/vmx: do not use vm-exit instruction length for fast MMIO when running nested kvm: embed vcpu id to dentry of vcpu anon inode kvm: Map PFN-type memory regions as writable (if possible) x86/kvm: Make it compile on 32bit and with HYPYERVISOR_GUEST=n KVM: arm/arm64: Fixup userspace irqchip static key optimization KVM: arm/arm64: Fix userspace_irqchip_in_use counting KVM: arm/arm64: Fix incorrect timer_is_pending logic MAINTAINERS: update KVM/s390 maintainers MAINTAINERS: add Halil as additional vfio-ccw maintainer MAINTAINERS: add David as a reviewer for KVM/s390 ... -
Alexey Kardashevskiy authored
59f47eff ("powerpc/pci: Use of_irq_parse_and_map_pci() helper") replaced of_irq_parse_pci() + irq_create_of_mapping() with of_irq_parse_and_map_pci(), but neglected to capture the virq returned by irq_create_of_mapping(), so virq remained zero, which caused INTx configuration to fail. Save the virq value returned by of_irq_parse_and_map_pci() and correct the virq declaration to match the of_irq_parse_and_map_pci() signature. Fixes: 59f47eff "powerpc/pci: Use of_irq_parse_and_map_pci() helper" Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> [bhelgaas: changelog] Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull more Kbuild updates from Masahiro Yamada: "Makefile changes: - enable unused-variable warning that was wrongly disabled for clang Kconfig changes: - warn about blank 'help' and fix existing instances - fix 'choice' behavior to not write out invisible symbols - fix misc weirdness Coccinell changes: - fix false positive of free after managed memory alloc detection - improve performance of NULL dereference detection" * tag 'kbuild-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (21 commits) kconfig: remove const qualifier from sym_expand_string_value() kconfig: add xrealloc() helper kconfig: send error messages to stderr kconfig: echo stdin to stdout if either is redirected kconfig: remove check_stdin() kconfig: remove 'config*' pattern from .gitignnore kconfig: show '?' prompt even if no help text is available kconfig: do not write choice values when their dependency becomes n coccinelle: deref_null: avoid useless computation coccinelle: devm_free: reduce false positives kbuild: clang: disable unused variable warnings only when constant kconfig: Warn if help text is blank nios2: kconfig: Remove blank help text arm: vt8500: kconfig: Remove blank help text MIPS: kconfig: Remove blank help text MIPS: BCM63XX: kconfig: Remove blank help text lib/Kconfig.debug: Remove blank help text Staging: rtl8192e: kconfig: Remove blank help text Staging: rtl8192u: kconfig: Remove blank help text mmc: kconfig: Remove blank help text ...
-
Al Viro authored
Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull misc vfs fixes from Al Viro. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: seq_file: fix incomplete reset on read from zero offset kernfs: fix regression in kernfs_fop_write caused by wrong type
-
Masahiro Yamada authored
This function returns realloc'ed memory, so the returned pointer must be passed to free() when done. So, 'const' qualifier is odd. It is allowed to modify the expanded string. Signed-off-by:Masahiro Yamada <yamada.masahiro@socionext.com>
-
Masahiro Yamada authored
We already have xmalloc(), xcalloc(). Add xrealloc() as well to save tedious error handling. Signed-off-by: -
Vadim Pasternak authored
It adds support for new Mellanox system types of basic classes qmb7, sn34, sn37, containing systems QMB700 (40x200GbE InfiniBand switch), SN3700 (32x200GbE and 16x400GbE Ethernet switch) and SN3410 (6x400GbE plus 48x50GbE Ethernet switch). These are the Top of the Rack systems, equipped with Mellanox COM-Express carrier board and switch board with Mellanox Quantum device, which supports InfiniBand switching with 40X200G ports and line rate of up to HDR speed or with Mellanox Spectrum-2 device, which supports Ethernet switching with 32X200G ports line rate of up to HDR speed. Signed-off-by:
Vadim Pasternak <vadimp@mellanox.com> Signed-off-by:
Darren Hart (VMware) <dvhart@infradead.org>
-
Vadim Pasternak authored
It adds support for new Mellanox system types of basic half unit size class msn201x, containing system MSN2010 (18x10GbE plus 4x4x25GbE) half and its derivatives. This is the Top of the Rack system, equipped with Mellanox Small Form Factor carrier board and switch board with Mellanox Spectrum device, which supports Ethernet switching with 32X100G ports line rate of up to EDR speed. Signed-off-by:
-
Vadim Pasternak authored
It adds support for new Mellanox system types of basic class msn274x, containing system MSN2740 (32x100GbE Ethernet switch with cost reduction) and its derivatives. These are the Top of the Rack system, equipped with Mellanox Small Form Factor carrier board and switch board with Mellanox Spectrum device, which supports Ethernet switching with 32X100G ports line rate of up to EDR speed. Signed-off-by:
-
- 09 Feb, 2018 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Make allocations less aggressive in x_tables, from Minchal Hocko. 2) Fix netfilter flowtable Kconfig deps, from Pablo Neira Ayuso. 3) Fix connection loss problems in rtlwifi, from Larry Finger. 4) Correct DRAM dump length for some chips in ath10k driver, from Yu Wang. 5) Fix ABORT handling in rxrpc, from David Howells. 6) Add SPDX tags to Sun networking drivers, from Shannon Nelson. 7) Some ipv6 onlink handling fixes, from David Ahern. 8) Netem packet scheduler interval calcualtion fix from Md. Islam. 9) Don't put crypto buffers on-stack in rxrpc, from David Howells. 10) Fix handling of error non-delivery status in netlink multicast delivery over multiple namespaces, from Nicolas Dichtel. 11) Missing xdp flush in tuntap driver, from Jason Wang. 12) Synchonize RDS protocol netns/module teardown with rds object management, from Sowini Varadhan. 13) Add nospec annotations to mpls, from Dan Williams. 14) Fix SKB truesize handling in TIPC, from Hoang Le. 15) Interrupt masking fixes in stammc from Niklas Cassel. 16) Don't allow ptr_ring objects to be sized outside of kmalloc's limits, from Jason Wang. 17) Don't allow SCTP chunks to be built which will have a length exceeding the chunk header's 16-bit length field, from Alexey Kodanev. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (82 commits) ibmvnic: Remove skb->protocol checks in ibmvnic_xmit bpf: fix rlimit in reuseport net selftest sctp: verify size of a new chunk in _sctp_make_chunk() s390/qeth: fix SETIP command handling s390/qeth: fix underestimated count of buffer elements ptr_ring: try vmalloc() when kmalloc() fails ptr_ring: fail early if queue occupies more than KMALLOC_MAX_SIZE net: stmmac: remove redundant enable of PMT irq net: stmmac: rename GMAC_INT_DEFAULT_MASK for dwmac4 net: stmmac: discard disabled flags in interrupt status register ibmvnic: Reset long term map ID counter tools/libbpf: handle issues with bpf ELF objects containing .eh_frames selftests/bpf: add selftest that use test_libbpf_open selftests/bpf: add test program for loading BPF ELF files tools/libbpf: improve the pr_debug statements to contain section numbers bpf: Sync kernel ABI header with tooling header for bpf_common.h net: phy: fix phy_start to consider PHY_IGNORE_INTERRUPT net: thunder: change q_len's type to handle max ring size tipc: fix skb truesize/datasize ratio control net/sched: cls_u32: fix cls_u32 on filter replace ...
-
