- 30 Oct, 2014 40 commits
-
-
David Henningsson authored
commit fb54a645 upstream. Without this terminating entry, the pin matching would continue across random memory until a zero or a non-matching entry was found. The result being that in some cases, the pin quirk would not be applied correctly. Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit b1974f96 upstream. We implemented in a wrong way for mute LED on Lenovo Ideapad; the bit must be flipped. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16373 Fixes: 3e887f37 ('ALSA: hda - Add mute LED support to Lenovo Ideapad') Signed-off-by:
-
Anssi Hannula authored
commit 6acce400 upstream. The ELD ALSA control change event is sent by hdmi_present_sense() when eld_changed is true. Currently, it is only true when the ELD buffer contents have been modified. However, the user-visible ELD controls also change to a zero-length value and back when eld_valid is unset/set, and no event is currently sent in such cases (such as when unplugging or replugging a sink). Fix the code to always set eld_changed if eld_valid value is changed, and therefore to always send the change event when the user-visible value changes. Signed-off-by:
Anssi Hannula <anssi.hannula@iki.fi> Cc: David Henningsson <david.henningsson@canonical.com> Signed-off-by:
-
Vlad Catoi authored
commit f0b127fb upstream. Adding support for Steinberg UR22 USB interface via quirks table patch See Ubuntu bug report: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1317244 Also see threads: http://linux-audio.4202.n7.nabble.com/Support-for-Steinberg-UR22-Yamaha-USB-chipset-0499-1509-tc82888.html#a82917 http://www.steinberg.net/forums/viewtopic.php?t=62290 Tested by at least 4 people judging by the threads. Did not test MIDI interface, but audio output and capture both are functional. Built 3.17 kernel with this driver on Ubuntu 14.04 & tested with mpg123 Patch applied to 3.13 Ubuntu kernel works well enough for daily use. Signed-off-by:
Vlad Catoi <vladcatoi@gmail.com> Acked-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Harsha Priya authored
commit b450b17c upstream. This patch sets the headphones mode to default before suspending which helps avoid the pop noise on headphones Signed-off-by:
Harsha Priya <harshapriya.n@intel.com> Signed-off-by:
-
Takashi Iwai authored
commit 95926035 upstream. The emu10k1 voice allocator takes voice_lock spinlock. When there is no empty stream available, it tries to release a voice used by synth, and calls get_synth_voice. The callback function, snd_emu10k1_synth_get_voice(), however, also takes the voice_lock, thus it deadlocks. The fix is simply removing the voice_lock holds in snd_emu10k1_synth_get_voice(), as this is always called in the spinlock context. Reported-and-tested-by:
Arthur Marsh <arthur.marsh@internode.on.net> Signed-off-by:
-
Takashi Sakamoto authored
commit 3f403286 upstream. This patch fixes a failure to open PCM device with -ENOSYS in Terratec Phase 88. Terratec Phase 88 has two Selector Function Blocks of AVC Audio subunit to switch source of clock. One is to switch internal/external for the source and another is to switch word/spdif for the external clock. The IDs for these Selector Function Blocks are 9 and 8. But in current implementation they're 0 and 0. Reported-by:
András Murányi <muranyia@gmail.com> Tested-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
-
Anatol Pomozov authored
commit a011e213 upstream. This avoids following kernel crash when try to playback on arm64 [ 107.497203] [<ffffffc00046b310>] snd_pcm_mmap_data_fault+0x90/0xd4 [ 107.503405] [<ffffffc0001541ac>] __do_fault+0xb0/0x498 [ 107.508565] [<ffffffc0001576a0>] handle_mm_fault+0x224/0x7b0 [ 107.514246] [<ffffffc000092640>] do_page_fault+0x11c/0x310 [ 107.519738] [<ffffffc000081100>] do_mem_abort+0x38/0x98 Tested: backported to 3.14 and tried to playback on arm64 machine Signed-off-by:
Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by:
-
Victor Kamensky authored
commit 971a5b6f upstream. The compat_elf_prpsinfo structure does not match the arch/arm struct elf_pspsinfo definition. As result NT_PRPSINFO note in core file created by arm64 kernel for aarch32 (compat) process has wrong size. So gdb cannot display command that caused process crash. Fix is to change size of __compat_uid_t, __compat_gid_t so it would match size of similar fields in arch/arm case. Signed-off-by:
Victor Kamensky <victor.kamensky@linaro.org> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Dmitry Kasatkin authored
commit b151d6b0 upstream. On ima_file_free(), newly created empty files are not labeled with an initial security.ima value, because the iversion did not change. Commit dff6efc3 "fs: fix iversion handling" introduced a change in iversion behavior. To verify this change use the shell command: $ (exec >foo) $ getfattr -h -e hex -d -m security foo This patch defines the IMA_NEW_FILE flag. The flag is initially set, when IMA detects that a new file is created, and subsequently checked on the ima_file_free() hook to set the initial security.ima value. Signed-off-by:
Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by:
Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by:
-
Dmitry Kasatkin authored
commit 27cd1fc3 upstream. 3.16 commit aad4f8bb 'switch simple generic_file_aio_read() users to ->read_iter()' replaced ->aio_read with ->read_iter in most of the file systems and introduced new_sync_read() as a replacement for do_sync_read(). Most of file systems set '->read' and ima_kernel_read is not affected. When ->read is not set, this patch adopts fallback call changes from the vfs_read. Signed-off-by:
-
Gavin Shan authored
commit 22fca179 upstream. The problem was reported by Carol: In the scenario of passing mlx4 adapter to guest, EEH error could be recovered successfully. When returning the device back to host, the driver (mlx4_core.ko) couldn't be loaded successfully because of error number -5 (-EIO) returned from mlx4_get_ownership(), which hits offlined PCI device. The root cause is that we missed to put the affected devices into normal state on clearing PE isolated state right after PE reset. The patch fixes above issue by putting the affected devices to normal state when clearing PE isolated state in eeh_pe_state_clear(). Reported-by:
Carol L. Soto <clsoto@us.ibm.com> Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Alexey Kardashevskiy authored
commit 9410e018 upstream. rtas_call() accepts and returns values in CPU endianness. The ddw_query_response and ddw_create_response structs members are defined and treated as BE but as they are passed to rtas_call() as (u32 *) and they get byteswapped automatically, the data is CPU-endian. This fixes ddw_query_response and ddw_create_response definitions and use. of_read_number() is designed to work with device tree cells - it assumes the input is big-endian and returns data in CPU-endian. However due to the ddw_create_response struct fix, create.addr_hi/lo are already CPU-endian so do not byteswap them. ddw_avail is a pointer to the "ibm,ddw-applicable" property which contains 3 cells which are big-endian as it is a device tree. rtas_call() accepts a RTAS token in CPU-endian. This makes use of of_property_read_u32_array to byte swap and avoid the need for a number of be32_to_cpu calls. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> [aik: folded Anton's patch with of_property_read_u32_array] Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Catalin Marinas authored
commit 76835b0e upstream. Commit b0c29f79 (futexes: Avoid taking the hb->lock if there's nothing to wake up) changes the futex code to avoid taking a lock when there are no waiters. This code has been subsequently fixed in commit 11d4616b (futex: revert back to the explicit waiter counting code). Both the original commit and the fix-up rely on get_futex_key_refs() to always imply a barrier. However, for private futexes, none of the cases in the switch statement of get_futex_key_refs() would be hit and the function completes without a memory barrier as required before checking the "waiters" in futex_wake() -> hb_waiters_pending(). The consequence is a race with a thread waiting on a futex on another CPU, allowing the waker thread to read "waiters == 0" while the waiter thread to have read "futex_val == locked" (in kernel). Without this fix, the problem (user space deadlocks) can be seen with Android bionic's mutex implementation on an arm64 multi-cluster system. Signed-off-by:
Matteo Franchin <Matteo.Franchin@arm.com> Fixes: b0c29f79 (futexes: Avoid taking the hb->lock if there's nothing to wake up) Acked-by:
Davidlohr Bueso <dave@stgolabs.net> Tested-by:
Mike Galbraith <umgwanakikbuti@gmail.com> Cc: Darren Hart <dvhart@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Daniel Glöckner authored
commit a882b14f upstream. Commit b5ada460 ("drivers/rtc/rtc-cmos.c: fix compilation warning when !CONFIG_PM_SLEEP") broke wakeup from S5 by making cmos_poweroff a nop unless CONFIG_PM_SLEEP was defined. Fix this by restricting the #ifdef to cmos_resume and restoring the old dependency on CONFIG_PM for cmos_suspend and cmos_poweroff. Signed-off-by:
Daniel Glöckner <daniel-gl@gmx.net> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Sasha Levin authored
commit 71458cfc upstream. We're missing include/linux/compiler-gcc5.h which is required now because gcc branched off to v5 in trunk. Just copy the relevant bits out of include/linux/compiler-gcc4.h, no new code is added as of now. This fixes a build error when using gcc 5. Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
Yann Droneaud authored
commit 0b37e097 upstream. According to commit 80af2588 ("fanotify: groups can specify their f_flags for new fd"), file descriptors created as part of file access notification events inherit flags from the event_f_flags argument passed to syscall fanotify_init(2)[1]. Unfortunately O_CLOEXEC is currently silently ignored. Indeed, event_f_flags are only given to dentry_open(), which only seems to care about O_ACCMODE and O_PATH in do_dentry_open(), O_DIRECT in open_check_o_direct() and O_LARGEFILE in generic_file_open(). It's a pity, since, according to some lookup on various search engines and http://codesearch.debian.net/, there's already some userspace code which use O_CLOEXEC: - in systemd's readahead[2]: fanotify_fd = fanotify_init(FAN_CLOEXEC|FAN_NONBLOCK, O_RDONLY|O_LARGEFILE|O_CLOEXEC|O_NOATIME); - in clsync[3]: #define FANOTIFY_EVFLAGS (O_LARGEFILE|O_RDONLY|O_CLOEXEC) int fanotify_d = fanotify_init(FANOTIFY_FLAGS, FANOTIFY_EVFLAGS); - in examples [4] from "Filesystem monitoring in the Linux kernel" article[5] by Aleksander Morgado: if ((fanotify_fd = fanotify_init (FAN_CLOEXEC, O_RDONLY | O_CLOEXEC | O_LARGEFILE)) < 0) Additionally, since commit 48149e9d ("fanotify: check file flags passed in fanotify_init"). having O_CLOEXEC as part of fanotify_init() second argument is expressly allowed. So it seems expected to set close-on-exec flag on the file descriptors if userspace is allowed to request it with O_CLOEXEC. But Andrew Morton raised[6] the concern that enabling now close-on-exec might break existing applications which ask for O_CLOEXEC but expect the file descriptor to be inherited across exec(). In the other hand, as reported by Mihai Dontu[7] close-on-exec on the file descriptor returned as part of file access notify can break applications due to deadlock. So close-on-exec is needed for most applications. More, applications asking for close-on-exec are likely expecting it to be enabled, relying on O_CLOEXEC being effective. If not, it might weaken their security, as noted by Jan Kara[8]. So this patch replaces call to macro get_unused_fd() by a call to function get_unused_fd_flags() with event_f_flags value as argument. This way O_CLOEXEC flag in the second argument of fanotify_init(2) syscall is interpreted and close-on-exec get enabled when requested. [1] http://man7.org/linux/man-pages/man2/fanotify_init.2.html [2] http://cgit.freedesktop.org/systemd/systemd/tree/src/readahead/readahead-collect.c?id=v208#n294 [3] https://github.com/xaionaro/clsync/blob/v0.2.1/sync.c#L1631 https://github.com/xaionaro/clsync/blob/v0.2.1/configuration.h#L38 [4] http://www.lanedo.com/~aleksander/fanotify/fanotify-example.c [5] http://www.lanedo.com/2013/filesystem-monitoring-linux-kernel/ [6] http://lkml.kernel.org/r/20141001153621.65e9258e65a6167bf2e4cb50@linux-foundation.org [7] http://lkml.kernel.org/r/20141002095046.3715eb69@mdontu-l [8] http://lkml.kernel.org/r/20141002104410.GB19748@quack.suse.cz Link: http://lkml.kernel.org/r/cover.1411562410.git.ydroneaud@opteya.comSigned-off-by:
Yann Droneaud <ydroneaud@opteya.com> Reviewed-by:
Jan Kara <jack@suse.cz> Reviewed by: Heinrich Schuchardt <xypron.glpk@gmx.de> Tested-by:
Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Mihai Don\u021bu <mihai.dontu@gmail.com> Cc: Pádraig Brady <P@draigBrady.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Jan Kara <jack@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Michael Kerrisk-manpages <mtk.manpages@gmail.com> Cc: Lino Sanfilippo <LinoSanfilippo@gmx.de> Cc: Richard Guy Briggs <rgb@redhat.com> Cc: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by:
-
Junxiao Bi authored
commit 934f3072 upstream. commit 21caf2fc ("mm: teach mm by current context info to not do I/O during memory allocation") introduces PF_MEMALLOC_NOIO flag to avoid doing I/O inside memory allocation, __GFP_IO is cleared when this flag is set, but __GFP_FS implies __GFP_IO, it should also be cleared. Or it may still run into I/O, like in superblock shrinker. And this will make the kernel run into the deadlock case described in that commit. See Dave Chinner's comment about io in superblock shrinker: Filesystem shrinkers do indeed perform IO from the superblock shrinker and have for years. Even clean inodes can require IO before they can be freed - e.g. on an orphan list, need truncation of post-eof blocks, need to wait for ordered operations to complete before it can be freed, etc. IOWs, Ext4, btrfs and XFS all can issue and/or block on arbitrary amounts of IO in the superblock shrinker context. XFS, in particular, has been doing transactions and IO from the VFS inode cache shrinker since it was first introduced.... Fix this by clearing __GFP_FS in memalloc_noio_flags(), this function has masked all the gfp_mask that will be passed into fs for the processes setting PF_MEMALLOC_NOIO in the direct reclaim path. v1 thread at: https://lkml.org/lkml/2014/9/3/32Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Cc: joyce.xue <xuejiufei@huawei.com> Cc: Ming Lei <ming.lei@canonical.com> Cc: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Johan Hedberg authored
commit 5eb596f5 upstream. We can only determine the final security level when both pairing request and response have been exchanged. When initiating pairing the starting target security level is set to MEDIUM unless explicitly specified to be HIGH, so that we can still perform pairing even if the remote doesn't have MITM capabilities. However, once we've received the pairing response we should re-consult the remote and local IO capabilities and upgrade the target security level if necessary. Without this patch the resulting Long Term Key will occasionally be reported to be unauthenticated when it in reality is an authenticated one. Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Champion Chen authored
commit 85560c4a upstream. Suspend could fail for some platforms because btusb_suspend==> btusb_stop_traffic ==> usb_kill_anchored_urbs. When btusb_bulk_complete returns before system suspend and resubmits an URB, the system cannot enter suspend state. Signed-off-by:
Champion Chen <champion_chen@realsil.com.cn> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Johan Hedberg authored
commit 72c6fb91 upstream. The l2cap_create_le_flowctl_pdu() function that l2cap_segment_le_sdu() calls is perfectly capable of doing packet fragmentation if given bigger PDUs than the HCI buffers allow. Forcing the PDU length based on the HCI MTU (conn->mtu) would therefore needlessly strict operation on hardware with limited LE buffers (e.g. both Intel and Broadcom seem to have this set to just 27 bytes). This patch removes the restriction and makes it possible to send PDUs of the full length that the remote MPS value allows. Signed-off-by:
-
Loic Poulain authored
commit 4807b518 upstream. In this expression: seq = (seq - 1) % 8 seq (u8) is implicitly converted to an int in the arithmetic operation. So if seq value is 0, operation is ((0 - 1) % 8) => (-1 % 8) => -1. The new seq value is 0xff which is an invalid ACK value, we expect 0x07. It leads to frequent dropped ACK and retransmission. Fix this by using '&' binary operator instead of '%'. Signed-off-by:
Loic Poulain <loic.poulain@intel.com> Signed-off-by:
-
Felix Fietkau authored
commit 171cdab8 upstream. This reverts commit 09efc563 I've received reports that this change is decreasing throughput in some rare conditions on an AR9280 based device Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Stanislaw Gruszka authored
commit 01f7feea upstream. Two bits control TX power on BBP_R1 register. Correct the mask, otherwise we clear additional bit on BBP_R1 register, what can have unknown, possible negative effect. Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Ricardo Ribalda Delgado authored
commit 89ec3dcf upstream. Some implementations of modprobe fail to load the driver for a PCI device automatically because the "interface" part of the modalias from the kernel is lowercase, and the modalias from file2alias is uppercase. The "interface" is the low-order byte of the Class Code, defined in PCI r3.0, Appendix D. Most interface types defined in the spec do not use alpha characters, so they won't be affected. For example, 00h, 01h, 10h, 20h, etc. are unaffected. Print the "interface" byte of the Class Code in uppercase hex, as we already do for the Vendor ID, Device ID, Class, etc. [bhelgaas: changelog] Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
-
Douglas Lehr authored
commit 9fe373f9 upstream. The Crocodile chip occasionally comes up with 4k and 8k BAR sizes. Due to an erratum, setting the SR-IOV page size causes the physical function BARs to expand to the system page size. Since ppc64 uses 64k pages, when Linux tries to assign the smaller resource sizes to the now 64k BARs the address will be truncated and the BARs will overlap. Force Linux to allocate the resource as a full page, which avoids the overlap. [bhelgaas: print expanded resource, too] Signed-off-by:
Douglas Lehr <dllehr@us.ibm.com> Signed-off-by:
Milton Miller <miltonm@us.ibm.com> Signed-off-by:
-
Yinghai Lu authored
commit d61b0e87 upstream. In 5b285415 ("PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources"), we added IORESOURCE_MEM_64 to the mask in pci_assign_unassigned_root_bus_resources(), but not to the mask in pci_assign_unassigned_bridge_resources(). Add IORESOURCE_MEM_64 to the pci_assign_unassigned_bridge_resources() type mask. Fixes: 5b285415 ("PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources") Signed-off-by:
Yinghai Lu <yinghai@kernel.org> Signed-off-by:
-
Thomas Petazzoni authored
commit 56fab6e1 upstream. Geert Uytterhoeven reported a warning when building pci-mvebu: drivers/pci/host/pci-mvebu.c: In function 'mvebu_get_tgt_attr': drivers/pci/host/pci-mvebu.c:887:39: warning: 'rtype' may be used uninitialized in this function [-Wmaybe-uninitialized] if (slot == PCI_SLOT(devfn) && type == rtype) { ^ And indeed, the code of mvebu_get_tgt_attr() may lead to the usage of rtype when being uninitialized, even though it would only happen if we had entries other than I/O space and 32 bits memory space. This commit fixes that by simply skipping the current DT range being considered, if it doesn't match the resource type we're looking for. Reported-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
-
Andy Shevchenko authored
commit 8e45ef68 upstream. Do full clean up at exit, means terminate all ongoing DMA transfers. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Oren Givon authored
commit 4f08970f upstream. Add 4 missing PCI IDs for the 7260 series. Signed-off-by:
Oren Givon <oren.givon@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
commit 9b60bb6d upstream. The tables still contain dummy values. Signed-off-by:
-
Trond Myklebust authored
commit b8fb9c30 upstream. It is OK for pageused == pagecount in the loop, as long as we don't add another entry to the *pages array. Move the test so that it only triggers in that case. Reported-by:
Steve Dickson <SteveD@redhat.com> Fixes: bba5c188 (nfs: disallow duplicate pages in pgio page vectors) Cc: Weston Andros Adamson <dros@primarydata.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Trond Myklebust authored
commit 3caa0c6e upstream. SteveD reports the following Oops: RIP: 0010:[<ffffffffa053461d>] [<ffffffffa053461d>] __put_nfs_open_context+0x1d/0x100 [nfs] RSP: 0018:ffff880fed687b90 EFLAGS: 00010286 RAX: 0000000000000024 RBX: 0000000000000000 RCX: 0000000000000006 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff880fed687bc0 R08: 0000000000000092 R09: 000000000000047a R10: 0000000000000000 R11: ffff880fed6878d6 R12: ffff880fed687d20 R13: ffff880fed687d20 R14: 0000000000000070 R15: ffffea000aa33ec0 FS: 00007fce290f0740(0000) GS:ffff8807ffc60000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000070 CR3: 00000007f2e79000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: 0000000000000000 ffff880036c5e510 ffff880fed687d20 ffff880fed687d20 ffff880036c5e200 ffffea000aa33ec0 ffff880fed687bd0 ffffffffa0534710 ffff880fed687be8 ffffffffa053d5f0 ffff880036c5e200 ffff880fed687c08 Call Trace: [<ffffffffa0534710>] put_nfs_open_context+0x10/0x20 [nfs] [<ffffffffa053d5f0>] nfs_pgio_data_destroy+0x20/0x40 [nfs] [<ffffffffa053d672>] nfs_pgio_error+0x22/0x40 [nfs] [<ffffffffa053d8f4>] nfs_generic_pgio+0x74/0x2e0 [nfs] [<ffffffffa06b18c3>] pnfs_generic_pg_writepages+0x63/0x210 [nfsv4] [<ffffffffa053d579>] nfs_pageio_doio+0x19/0x50 [nfs] [<ffffffffa053eb84>] nfs_pageio_complete+0x24/0x30 [nfs] [<ffffffffa053cb25>] nfs_direct_write_schedule_iovec+0x115/0x1f0 [nfs] [<ffffffffa053675f>] ? nfs_get_lock_context+0x4f/0x120 [nfs] [<ffffffffa053d252>] nfs_file_direct_write+0x262/0x420 [nfs] [<ffffffffa0532d91>] nfs_file_write+0x131/0x1d0 [nfs] [<ffffffffa0532c60>] ? nfs_need_sync_write.isra.17+0x40/0x40 [nfs] [<ffffffff812127b8>] do_io_submit+0x3b8/0x840 [<ffffffff81212c50>] SyS_io_submit+0x10/0x20 [<ffffffff81610f29>] system_call_fastpath+0x16/0x1b This is due to the calls to nfs_pgio_error() in nfs_generic_pgio(), which happen before the nfs_pgio_header's open context is referenced in nfs_pgio_rpcsetup(). Reported-by:
-
J. Bruce Fields authored
commit f7b43d0c upstream. As of 8c7424cf "nfsd4: don't try to encode conflicting owner if low on space", we permit the server to process a LOCK operation even if there might not be space to return the conflicting lockowner, because we've made returning the conflicting lockowner optional. However, the rpc server still wants to know the most we might possibly return, so we need to take into account the possible conflicting lockowner in the svc_reserve_space() call here. Symptoms were log messages like "RPC request reserved 88 but used 108". Fixes: 8c7424cf "nfsd4: don't try to encode conflicting owner if low on space" Reported-by:
Kinglong Mee <kinglongmee@gmail.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Andy Adamson authored
commit d1f456b0 upstream. Commit 2f60ea6b ("NFSv4: The NFSv4.0 client must send RENEW calls if it holds a delegation") set the NFS4_RENEW_TIMEOUT flag in nfs4_renew_state, and does not put an nfs41_proc_async_sequence call, the NFSv4.1 lease renewal heartbeat call, on the wire to renew the NFSv4.1 state if the flag was not set. The NFS4_RENEW_TIMEOUT flag is set when "now" is after the last renewal (cl_last_renewal) plus the lease time divided by 3. This is arbitrary and sometimes does the following: In normal operation, the only way a future state renewal call is put on the wire is via a call to nfs4_schedule_state_renewal, which schedules a nfs4_renew_state workqueue task. nfs4_renew_state determines if the NFS4_RENEW_TIMEOUT should be set, and the calls nfs41_proc_async_sequence, which only gets sent if the NFS4_RENEW_TIMEOUT flag is set. Then the nfs41_proc_async_sequence rpc_release function schedules another state remewal via nfs4_schedule_state_renewal. Without this change we can get into a state where an application stops accessing the NFSv4.1 share, state renewal calls stop due to the NFS4_RENEW_TIMEOUT flag _not_ being set. The only way to recover from this situation is with a clientid re-establishment, once the application resumes and the server has timed out the lease and so returns NFS4ERR_BAD_SESSION on the subsequent SEQUENCE operation. An example application: open, lock, write a file. sleep for 6 * lease (could be less) ulock, close. In the above example with NFSv4.1 delegations enabled, without this change, there are no OP_SEQUENCE state renewal calls during the sleep, and the clientid is recovered due to lease expiration on the close. This issue does not occur with NFSv4.1 delegations disabled, nor with NFSv4.0, with or without delegations enabled. Signed-off-by:
Andy Adamson <andros@netapp.com> Link: http://lkml.kernel.org/r/1411486536-23401-1-git-send-email-andros@netapp.com Fixes: 2f60ea6b (NFSv4: The NFSv4.0 client must send RENEW calls...) Signed-off-by:
-
Trond Myklebust authored
commit df817ba3 upstream. The current open/lock state recovery unfortunately does not handle errors such as NFS4ERR_CONN_NOT_BOUND_TO_SESSION correctly. Instead of looping, just proceeds as if the state manager is finished recovering. This patch ensures that we loop back, handle higher priority errors and complete the open/lock state recovery. Signed-off-by:
-
Trond Myklebust authored
commit a4339b7b upstream. If a NFSv4.x server returns NFS4ERR_STALE_CLIENTID in response to a CREATE_SESSION or SETCLIENTID_CONFIRM in order to tell us that it rebooted a second time, then the client will currently take this to mean that it must declare all locks to be stale, and hence ineligible for reboot recovery. RFC3530 and RFC5661 both suggest that the client should instead rely on the server to respond to inelegible open share, lock and delegation reclaim requests with NFS4ERR_NO_GRACE in this situation. Signed-off-by:
-
Frans Klaver authored
commit dc318756 upstream. If the chosen baud rate is large enough (e.g. 3.5 megabaud), the calculated n values in serial_omap_is_baud_mode16() may become 0. This causes a division by zero when calculating the difference between calculated and desired baud rates. To prevent this, cap the n13 and n16 values on 1. Division by zero in kernel. [<c00132e0>] (unwind_backtrace) from [<c00112ec>] (show_stack+0x10/0x14) [<c00112ec>] (show_stack) from [<c01ed7bc>] (Ldiv0+0x8/0x10) [<c01ed7bc>] (Ldiv0) from [<c023805c>] (serial_omap_baud_is_mode16+0x4c/0x68) [<c023805c>] (serial_omap_baud_is_mode16) from [<c02396b4>] (serial_omap_set_termios+0x90/0x8d8) [<c02396b4>] (serial_omap_set_termios) from [<c0230a0c>] (uart_change_speed+0xa4/0xa8) [<c0230a0c>] (uart_change_speed) from [<c0231798>] (uart_set_termios+0xa0/0x1fc) [<c0231798>] (uart_set_termios) from [<c022bb44>] (tty_set_termios+0x248/0x2c0) [<c022bb44>] (tty_set_termios) from [<c022c17c>] (set_termios+0x248/0x29c) [<c022c17c>] (set_termios) from [<c022c3e4>] (tty_mode_ioctl+0x1c8/0x4e8) [<c022c3e4>] (tty_mode_ioctl) from [<c0227e70>] (tty_ioctl+0xa94/0xb18) [<c0227e70>] (tty_ioctl) from [<c00cf45c>] (do_vfs_ioctl+0x4a0/0x560) [<c00cf45c>] (do_vfs_ioctl) from [<c00cf568>] (SyS_ioctl+0x4c/0x74) [<c00cf568>] (SyS_ioctl) from [<c000e480>] (ret_fast_syscall+0x0/0x30) Signed-off-by:
Frans Klaver <frans.klaver@xsens.com> Signed-off-by:
-
Willy Tarreau authored
commit 72cf9012 upstream. This fix ensures that we never meet an integer overflow while adding 255 while parsing a variable length encoding. It works differently from commit 206a81c1 ("lzo: properly check for overruns") because instead of ensuring that we don't overrun the input, which is tricky to guarantee due to many assumptions in the code, it simply checks that the cumulated number of 255 read cannot overflow by bounding this number. The MAX_255_COUNT is the maximum number of times we can add 255 to a base count without overflowing an integer. The multiply will overflow when multiplying 255 by more than MAXINT/255. The sum will overflow earlier depending on the base count. Since the base count is taken from a u8 and a few bits, it is safe to assume that it will always be lower than or equal to 2*255, thus we can always prevent any overflow by accepting two less 255 steps. This patch also reduces the CPU overhead and actually increases performance by 1.1% compared to the initial code, while the previous fix costs 3.1% (measured on x86_64). The fix needs to be backported to all currently supported stable kernels. Reported-by:
Willem Pinckaers <willem@lekkertech.net> Cc: "Don A. Bailey" <donb@securitymouse.com> Signed-off-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Willy Tarreau authored
commit af958a38 upstream. This reverts commit 206a81c1 ("lzo: properly check for overruns"). As analysed by Willem Pinckaers, this fix is still incomplete on certain rare corner cases, and it is easier to restart from the original code. Reported-by:
-
