- 03 Feb, 2005 40 commits
-
-
Ralf Bächle authored
o Remove old unused header files o Update the VINO video driver to something that's vaguely working o Bug fixes for the IP22 Zilog driver o Fix use of config.h Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Dominik Brodowski authored
The pseudo-unregistration of PCMCIA sockets in case the registration of any such socket failed causes lockups. See http://bugme.osdl.org/show_bug.cgi?id=4115 for details (same problem, Signed-off-by:
Dominik Brodowski <linux@brodo.de> Signed-off-by:
-
Dominik Brodowski authored
Fix a bug which was diagnosed by David Howard <daveh@dmh2000.com>. The pseudo-unregistration of PCMCIA sockets in case the registration of any such socket failed causes lockups. See http://bugme.osdl.org/show_bug.cgi?id=4115 for details Signed-off-by:
-
Sripathi Kodi authored
s390 should use the generic compat functions for compat_sys_old_readdir and compat_sys_getdents. The s390 specific ones are buggy and superflous. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Hannes Reinecke authored
tst-timer4 from the glibc fails in the 32bit compat execution environment. This is due to a incomplete siginfo structure for POSIX.1b timers in compat_signal.c. Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Martin Schwidefsky authored
From: Steffen Thoss <thoss@de.ibm.com> From: Frank Pavlic <pavlic@de.ibm.com> qeth network driver changes: - Improve performance by omitting svs. - Use function callback mechanism to set layer 2 parameters when getting a reply for a Layer 2 command. - dev->hard_header must not be NULL when fake_ll is no set since IPv6 and Layer2 needs the default function set by network stack. - ping6 works now when running in layer 2 mode. - Save original dev->hard_header to restore it when the user doesn't want to use fake_ll anymore. - Fake ethernet header in outgoing packets. This currently works only if qeth is compiled without ipv6 support. - Add more debug information in case of failures in qeth_set_offline. - Using fake_ll with HiperSockets devices results in misaligned ip packets and thus no traffic over HiperSockets. - Start qeth_remove_device only after the qeth recovery completed. Signed-off-by:
-
Thomas Spatzier authored
Add interface for key protected i/o. Signed-off-by:
-
Cornelia Huck authored
Common i/o layer changes: - Allow ccw_device_halt() and ccw_device_clear() in state WAIT4IO. Signed-off-by:
-
Horst Hummel authored
dasd driver change: - Set default i/o scheduler to 'deadline'. Latest performance results indicate that this works fastest. - Set default debug feature level to DBF_EMERG. Signed-off-by:
-
Christian Bornträger authored
- Diagnose 8 needs a response buffer below 2GB real storage. As the caller cannot always allocate the buffer with GFP_DMA the best solution is to rewrite cpcmd to use a bounce buffer if necessary. The old function was renamed to __cpcmd and can be called if appropriate. The early boot code does not provide kmalloc but need cpcmd functionality. These places have been converted to use __cpcmd, as the init code and data are below 2GB. - In case of an 31 bit system, cpcmd is defined as __cpcmd. - EXPORT_SYMBOL(cpcmd) moved into cpcmd.c - some whitespace fixes in cpcmd.[c/h] Signed-off-by:
-
James Lamanna authored
arch/s390/kernel/module.c vfree() checking cleanup. Signed-off-by:
James Lamanna <jlamanna@gmail.com> Signed-off-by:
Domen Puncer <domen@coderock.org> Signed-off-by:
-
Martin Schwidefsky authored
From: Christian Bornträger <cborntra@de.ibm.com> From: Heiko Carstens <heiko.carstens@de.ibm.com> From: Michael Holzheu <holzheu@de.ibm.com> From: Martin Schwidefsky <schwidefsky@de.ibm.com> s390 core changes: - Export arch_pick_mmap_layout as GPL symbol for binfmt_elf32. - Remove unnecessary include from cmm. - Allow only root to read the debug feature logs. - Register all RAM resources, this fixes output of /proc/iomem. - Add read_can_lock and write_can_lock primitives. - Regenerate default configuration. Signed-off-by:
-
Mark A. Greer authored
This patch fixes 2 SMP deadlocks. The first is that mv64x60_read() was returning before the unlock. The second was mv64x60_modify() locks the spin lock and calls mv64x60_read() and mv64x60_write() which also lock the same spin lock. Signed-Off-By:
Brian Waite <waite@skycomputers.com> Signed-off-by:
Mark A. Greer <mgreer@mvista.com> Signed-off-by:
-
Mark A. Greer authored
include/asm-ppc/rwsem.h has '#ifdef RWSEM_DEBUG' but RWSEM_DEBUG is always defined (as 0) in include/linux/rwsem.h. The #ifdef's should be #if's. This also brings the ppc usage in line with the the other architectures. Signed-off-by:
-
Matt Porter authored
Adds support for the IBM/AMCC PPC440SP SoC. Also adds support for the Luan reference board that has a 440SP on it. Signed-off-by:
Matt Porter <mporter@kernel.crashing.org> Signed-off-by:
-
Matt Porter authored
This fixes several issues with the PPC4xx DMA library as well as adding support for bursting and some improvements to SG handling. Signed-off-by:
Colin Wernham <cwernham@airspan.com> Signed-off-by:
-
Stephen D. Smalley authored
This patch changes SELinux to display any permission values that could not be mapped to names as a hex value when generating an audit message. Signed-off-by:
Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by:
James Morris <jmorris@redhat.com> Signed-off-by:
-
Stephen D. Smalley authored
This patch regenerates the SELinux module headers to define the execmod permission for character device files in order to provide proper auditing of such checks on /dev/zero. Signed-off-by:
-
Andres Salomon authored
Since acpi_cpufreq_resume and speedstep_resume appear to return 0 upon success, it seems like the attached patch is what the desired behavior would be. Otherwise, cpufreq_resume() always prints an error and exits early if using a cpufreq_driver that supports resume. Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Arnd Bergmann authored
The earlier patch forgot to add the Makefile change. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Fanny Wakizaka authored
avma1_cs detect routine for AVM A1 based PCMCIA cards has its "outb" parameters inverted - switch to "byteout" define to be conformant with the rest of the driver, fixing the order. This was noticed on PPC, which triggers an MCE in case of invalid IO port access, which is not the case on x86. Signed-off-by:
Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by:
-
Tom Rini authored
<linux/prio_tree.h> is unsafe for inclusion by userland apps, but it is in the userland-exposed portion of <linux/fs.h>. It's only needed in the __KERNEL__ protected portion of the file, so move the #include down to there. lmbench-2.0.4 runs into this issue in 'flushdisk'. Signed-off-by:
Tom Rini <trini@kernel.crashing.org> Signed-off-by:
-
Jan Kara authored
From: Vladimir Saveliev <vs@namesys.com>, Jan Kara <jack@suse.cz> Add missing SMP locking and one lock_buffer() to the reiserfs quota code. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Alasdair G. Kergon authored
Fix some bugs in device-mapper handling of 64-bit values, replacing dm_div_up() and dm_round_up() inlines with macros and removing some avoidable divisions of 64-bit numbers. The mirror region size is the granularity used to manage and monitor the data copying, typically 512KB, so 32 bits (of sectors) should be plenty to hold this. Taken together with the two earlier patches: "fix TB stripe data corruption" (a missing cast) and "stripe_width should be sector_t", I've now had 3 independent reports that this fixes device-mapper for devices with large stripes. Still awaiting test results for dm-crypt and dm-raid1. Signed-Off-By:
Alasdair G Kergon <agk@redhat.com> Signed-off-by:
-
Alasdair G. Kergon authored
stripe_width should be sector_t to support large devices. Signed-Off-By:
-
Dave Jones authored
Signed-off-by:
-
Michael S. Tsirkin authored
Fix unbalanced QP reference count decrement (introduced with QP lock optimization patch) Signed-off-by:
Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by:
Roland Dreier <roland@topspin.com> Signed-off-by:
-
Libor Michalek authored
Add a missing break statement between RC and UD cases in mthca_post_send(). This fixes a possible oops for protocols that use the RC transport. Signed-off-by:
Libor Michalek <libor@topspin.com> Signed-off-by:
-
Andrew Morton authored
- Fix it for older C compilers. - Extern decls always, always, always go in header files, please. Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by:
-
bk://kernel.bkbits.net/gregkh/linux/2.6.11-rc3/i2cLinus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
bk://kernel.bkbits.net/gregkh/linux/2.6.11-rc3/pciLinus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
bk://kernel.bkbits.net/gregkh/linux/2.6.11-rc3/usbLinus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Linus Torvalds authored
Not that low-level code really tends to care, but since loff_t is a signed 64-bit entity and size_t is unsigned (and potentially 64-bit), mixing the two isn't very well-defined..
-
Linus Torvalds authored
The actual user copy will do them too, but only for the range that ends up being actually copied. That hides bugs when the range has been clamped by file size or other issues.
-
-
Bartlomiej Zolnierkiewicz authored
With Olaf Hering <olh@suse.de>. Parameters were interchanged. Signed-off-by:Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Prarit Bhargava authored
From: Prarit Bhargava <prarit@sgi.com> I discovered an issue where a hwif_init() failure lead to /proc/ide files being created for devices that failed probes. This resulted in oops/WARN_ON/BUG_ON executions through the kernel depending on what actions were on going. slightly changed by me (bart) Signed-off-by: -
Tejun Heo authored
ide_hwgroup_t.polling field added. 0 in poll_timeout field used to indicate inactive polling but because 0 is a valid jiffy value, though slim, there's a chance that something weird can happen. Signed-off-by:
Tejun Heo <tj@home-tj.org> Signed-off-by:
-
Tejun Heo authored
ide_drive_t.sleeping field added. 0 in sleep field used to indicate inactive sleeping but because 0 is a valid jiffy value, though slim, there's a chance that something can go weird. And while at it, explicit jiffy comparisons are converted to use time_before() macros. Signed-off-by:
-
Tejun Heo authored
Signed-off-by:
-
