- 10 Mar, 2024 1 commit
-
-
Daniel Golle authored
A compiler warning related to sizeof(int) != 8 when calling do_div() is triggered when building on 32-bit platforms. Address this by using integer types having a well-defined size. Fixes: 3ce48580 ("mtd: ubi: provide NVMEM layer over UBI volumes") Signed-off-by:
Daniel Golle <daniel@makrotopia.org> Reviewed-by:
Zhihao Cheng <chengzhihao1@huawei.com> Tested-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Richard Weinberger <richard@nod.at>
-
- 25 Feb, 2024 33 commits
-
-
Daniel Golle authored
In an ideal world we would like UBI to be used where ever possible on a NAND chip. And with UBI support in ARM Trusted Firmware and U-Boot it is possible to achieve an (almost-)all-UBI flash layout. Hence the need for a way to also use UBI volumes to store board-level constants, such as MAC addresses and calibration data of wireless interfaces. Add UBI volume NVMEM driver module exposing UBI volumes as NVMEM providers. Allow UBI devices to have a "volumes" firmware subnode with volumes which may be compatible with "nvmem-cells". Access to UBI volumes via the NVMEM interface at this point is read-only, and it is slow, opening and closing the UBI volume for each access due to limitations of the NVMEM provider API. Signed-off-by:
-
Daniel Golle authored
Look for the 'volumes' subnode of an MTD partition attached to a UBI device and attach matching child nodes to UBI volumes. This allows UBI volumes to be referenced in device tree, e.g. for use as NVMEM providers. Signed-off-by:
-
Daniel Golle authored
Introduce a new notification type UBI_VOLUME_SHUTDOWN to inform users that a volume is just about to be removed. This is needed because users (such as the NVMEM subsystem) expect that at the time their removal function is called, the parenting device is still available (for removal of sysfs nodes, for example, in case of NVMEM which otherwise WARNs on volume removal). Signed-off-by:
-
Daniel Golle authored
Introduce device tree compatible 'linux,ubi' and attach compatible MTD devices using the MTD add notifier. This is needed for a UBI device to be available early at boot (and not only after late_initcall), so volumes on them can be used eg. as NVMEM providers for other drivers. Signed-off-by:
-
Daniel Golle authored
Use UBI_VOLUME_ADDED notification to create ubiblock device specified on kernel cmdline or module parameter. This makes thing more simple and has the advantage that ubiblock devices on volumes which are not present at the time the ubi module is probed will still be created. Suggested-by:
-
Daniel Golle authored
UBI volumes may be used to contain NVMEM bits, typically device MAC addresses or wireless radio calibration data. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Daniel Golle authored
Add basic bindings for UBI devices and volumes. Signed-off-by:
-
Zhihao Cheng authored
Recently we catched ENOSPC returned by make_reservation() while doing fsstress on UBIFS, we got following information when it occurred (See details in Link): UBIFS error (ubi0:0 pid 3640152): make_reservation [ubifs]: cannot reserve 112 bytes in jhead 2, error -28 CPU: 2 PID: 3640152 Comm: kworker/u16:2 Tainted: G B W Hardware name: Hisilicon PhosphorHi1230 EMU (DT) Workqueue: writeback wb_workfn (flush-ubifs_0_0) Call trace: dump_stack+0x114/0x198 make_reservation+0x564/0x610 [ubifs] ubifs_jnl_write_data+0x328/0x48c [ubifs] do_writepage+0x2a8/0x3e4 [ubifs] ubifs_writepage+0x16c/0x374 [ubifs] generic_writepages+0xb4/0x114 do_writepages+0xcc/0x11c writeback_sb_inodes+0x2d0/0x564 wb_writeback+0x20c/0x2b4 wb_workfn+0x404/0x510 process_one_work+0x304/0x4ac worker_thread+0x31c/0x4e4 kthread+0x23c/0x290 Budgeting info: data budget sum 17576, total budget sum 17768 budg_data_growth 4144, budg_dd_growth 13432, budg_idx_growth 192 min_idx_lebs 13, old_idx_sz 988640, uncommitted_idx 0 page_budget 4144, inode_budget 160, dent_budget 312 nospace 0, nospace_rp 0 dark_wm 8192, dead_wm 4096, max_idx_node_sz 192 freeable_cnt 0, calc_idx_sz 988640, idx_gc_cnt 0 dirty_pg_cnt 4, dirty_zn_cnt 0, clean_zn_cnt 4811 gc_lnum 21, ihead_lnum 14 jhead 0 (GC) LEB 16 jhead 1 (base) LEB 34 jhead 2 (data) LEB 23 bud LEB 16 bud LEB 23 bud LEB 34 old bud LEB 33 old bud LEB 31 old bud LEB 15 commit state 4 Budgeting predictions: available: 33832, outstanding 17576, free 15356 (pid 3640152) start dumping LEB properties (pid 3640152) Lprops statistics: empty_lebs 3, idx_lebs 11 taken_empty_lebs 1, total_free 1253376, total_dirty 2445736 total_used 3438712, total_dark 65536, total_dead 17248 LEB 15 free 0 dirty 248000 used 5952 (taken) LEB 16 free 110592 dirty 896 used 142464 (taken, jhead 0 (GC)) LEB 21 free 253952 dirty 0 used 0 (taken, GC LEB) LEB 23 free 0 dirty 248104 used 5848 (taken, jhead 2 (data)) LEB 29 free 253952 dirty 0 used 0 (empty) LEB 33 free 0 dirty 253952 used 0 (taken) LEB 34 free 217088 dirty 36544 used 320 (taken, jhead 1 (base)) LEB 37 free 253952 dirty 0 used 0 (empty) OTHERS: index lebs, zero-available non-index lebs According to the budget algorithm, there are 5 LEBs reserved for budget: three journal heads(16,23,34), 1 GC LEB(21) and 1 deletion LEB(can be used in make_reservation()). There are 2 empty LEBs used for index nodes, which is calculated as min_idx_lebs - idx_lebs = 2. In theory, LEB 15 and 33 should be reclaimed as free state after committing, but it is now in taken state. After looking the realization of reserve_space(), there's a possible situation: LEB 15: free 2000 dirty 248000 used 3952 (jhead 2) LEB 23: free 2000 dirty 248104 used 3848 (bud, taken) LEB 33: free 2000 dirty 251952 used 0 (bud, taken) wb_workfn wb_workfn_2 do_writepage // write 3000 bytes ubifs_jnl_write_data make_reservation reserve_space ubifs_garbage_collect ubifs_find_dirty_leb // ret ENOSPC, dirty LEBs are taken nospc_retries++ // 1 ubifs_run_commit do_commit LEB 15: free 2000 dirty 248000 used 3952 (jhead 2) LEB 23: free 2000 dirty 248104 used 3848 (dirty) LEB 33: free 2000 dirty 251952 used 0 (dirty) do_writepage // write 2000 bytes for 3 times ubifs_jnl_write_data // grabs 15\23\33 LEB 15: free 0 dirty 248000 used 5952 (bud, taken) LEB 23: free 0 dirty 248104 used 5848 (jhead 2) LEB 33: free 0 dirty 253952 used 0 (bud, taken) reserve_space ubifs_garbage_collect ubifs_find_dirty_leb // ret ENOSPC, dirty LEBs are taken if (nospc_retries++ < 2) // false ubifs_ro_mode ! Fetch a reproducer in Link. The dirty LEBs could be grabbed by other threads, which fails finding dirty LEBs of GC in current thread, so make_reservation() could try many times to invoke GC&&committing, but current realization limits the times of retrying as 'nospc_retries'(twice). Fix it by adding a wait queue, start queuing up space reservation tasks when someone task has retried gc + commit for many times. Then there is only one task making space reservation at any time, and it can always make success under the premise of correct budgeting. Link: https://bugzilla.kernel.org/show_bug.cgi?id=218164 Fixes: 1e51764a ("UBIFS: add new flash file system") Signed-off-by:Zhang Yi <yi.zhang@huawei.com> Signed-off-by:
-
Zhihao Cheng authored
For error handling path in ubifs_symlink(), inode will be marked as bad first, then iput() is invoked. If inode->i_link is initialized by fscrypt_encrypt_symlink() in encryption scenario, inode->i_link won't be freed by callchain ubifs_free_inode -> fscrypt_free_inode in error handling path, because make_bad_inode() has changed 'inode->i_mode' as 'S_IFREG'. Following kmemleak is easy to be reproduced by injecting error in ubifs_jnl_update() when doing symlink in encryption scenario: unreferenced object 0xffff888103da3d98 (size 8): comm "ln", pid 1692, jiffies 4294914701 (age 12.045s) backtrace: kmemdup+0x32/0x70 __fscrypt_encrypt_symlink+0xed/0x1c0 ubifs_symlink+0x210/0x300 [ubifs] vfs_symlink+0x216/0x360 do_symlinkat+0x11a/0x190 do_syscall_64+0x3b/0xe0 There are two ways fixing it: 1. Remove make_bad_inode() in error handling path. We can do that because ubifs_evict_inode() will do same processes for good symlink inode and bad symlink inode, for inode->i_nlink checking is before is_bad_inode(). 2. Free inode->i_link before marking inode bad. Method 2 is picked, it has less influence, personally, I think. Cc: stable@vger.kernel.org Fixes: 2c58d548 ("fscrypt: cache decrypted symlink target in ->i_link") Signed-off-by:Eric Biggers <ebiggers@kernel.org> Reviewed-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Zhihao Cheng authored
If function dbg_check_idx_size() failed by loading znode in mounting process, there are two problems: 1. Allocated znodes won't be freed, which causes kmemleak in kernel: ubifs_mount dbg_check_idx_size dbg_walk_index c->zroot.znode = ubifs_load_znode child = ubifs_load_znode // failed // Loaded znodes won't be freed in error handling path. 2. Global variable ubifs_clean_zn_cnt is not decreased, because ubifs_tnc_close() is not invoked in error handling path, which triggers a warning in ubifs_exit(): WARNING: CPU: 1 PID: 1576 at fs/ubifs/super.c:2486 ubifs_exit Modules linked in: zstd ubifs(-) ubi nandsim CPU: 1 PID: 1576 Comm: rmmod Not tainted 6.7.0-rc6 Call Trace: ubifs_exit+0xca/0xc70 [ubifs] __do_sys_delete_module+0x29a/0x4a0 do_syscall_64+0x6f/0x140 Fix it by adding error handling path in dbg_check_idx_size() to release tnc tree. Fixes: 1e51764a ("UBIFS: add new flash file system") Signed-off-by: -
ZhaoLong Wang authored
In the error handling path `out_acc` of `ubi_resize_volume()`, when `pebs < 0`, it indicates that the volume table record failed to update when the volume was shrunk. In this case, the number of `ubi->avail_pebs` and `ubi->rsvd_pebs` should be restored to their previous values to prevent the UBI layer from reporting an incorrect number of available PEBs. Signed-off-by:
ZhaoLong Wang <wangzhaolong1@huawei.com> Reviewed-by:
-
Guo Xuenan authored
When using the ioctl interface to resize a UBI volume, `ubi_resize_volume` resizes the EBA table first but does not change `vol->reserved_pebs` in the same atomic context, which may cause concurrent access to the EBA table. For example, when a user shrinks UBI volume A by calling `ubi_resize_volume`, while another thread is writing to volume B and triggering wear-leveling, which may call `ubi_write_fastmap`, under these circumstances, KASAN may report a slab-out-of-bounds error in `ubi_eba_get_ldesc+0xfb/0x130`. This patch fixes race conditions in `ubi_resize_volume` and `ubi_update_fastmap` to avoid out-of-bounds reads of `eba_tbl`. First, it ensures that updates to `eba_tbl` and `reserved_pebs` are protected by `vol->volumes_lock`. Second, it implements a rollback mechanism in case of resize failure. It is also worth mentioning that for volume shrinkage failures, since part of the volume has already been shrunk and unmapped, there is no need to recover `{rsvd/avail}_pebs`. ================================================================== BUG: KASAN: slab-out-of-bounds in ubi_eba_get_ldesc+0xfb/0x130 [ubi] Read of size 4 at addr ffff88800f43f570 by task kworker/u16:0/7 CPU: 0 PID: 7 Comm: kworker/u16:0 Not tainted 5.16.0-rc7 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: writeback wb_workfn (flush-ubifs_0_0) Call Trace: <TASK> dump_stack_lvl+0x4d/0x66 print_address_description.constprop.0+0x41/0x60 kasan_report.cold+0x83/0xdf ubi_eba_get_ldesc+0xfb/0x130 [ubi] ubi_update_fastmap.cold+0x60f/0xc7d [ubi] ubi_wl_get_peb+0x25b/0x4f0 [ubi] try_write_vid_and_data+0x9a/0x4d0 [ubi] ubi_eba_write_leb+0x7e4/0x17d0 [ubi] ubi_leb_map+0x1a0/0x2c0 [ubi] ubifs_leb_map+0x139/0x270 [ubifs] ubifs_add_bud_to_log+0xb40/0xf30 [ubifs] make_reservation+0x86e/0xb00 [ubifs] ubifs_jnl_write_data+0x430/0x9d0 [ubifs] do_writepage+0x1d1/0x550 [ubifs] ubifs_writepage+0x37c/0x670 [ubifs] __writepage+0x67/0x170 write_cache_pages+0x259/0xa90 do_writepages+0x277/0x5d0 __writeback_single_inode+0xb8/0x850 writeback_sb_inodes+0x4b3/0xb20 __writeback_inodes_wb+0xc1/0x220 wb_writeback+0x59f/0x740 wb_workfn+0x6d0/0xca0 process_one_work+0x711/0xfc0 worker_thread+0x95/0xd00 kthread+0x3a6/0x490 ret_from_fork+0x1f/0x30 </TASK> Allocated by task 711: kasan_save_stack+0x1e/0x50 __kasan_kmalloc+0x81/0xa0 ubi_eba_create_table+0x88/0x1a0 [ubi] ubi_resize_volume.cold+0x175/0xae7 [ubi] ubi_cdev_ioctl+0x57f/0x1a60 [ubi] __x64_sys_ioctl+0x13a/0x1c0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Last potentially related work creation: kasan_save_stack+0x1e/0x50 __kasan_record_aux_stack+0xb7/0xc0 call_rcu+0xd6/0x1000 blk_stat_free_callback+0x28/0x30 blk_release_queue+0x8a/0x2e0 kobject_put+0x186/0x4c0 scsi_device_dev_release_usercontext+0x620/0xbd0 execute_in_process_context+0x2f/0x120 device_release+0xa4/0x240 kobject_put+0x186/0x4c0 put_device+0x20/0x30 __scsi_remove_device+0x1c3/0x300 scsi_probe_and_add_lun+0x2140/0x2eb0 __scsi_scan_target+0x1f2/0xbb0 scsi_scan_channel+0x11b/0x1a0 scsi_scan_host_selected+0x24c/0x310 do_scsi_scan_host+0x1e0/0x250 do_scan_async+0x45/0x490 async_run_entry_fn+0xa2/0x530 process_one_work+0x711/0xfc0 worker_thread+0x95/0xd00 kthread+0x3a6/0x490 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff88800f43f500 which belongs to the cache kmalloc-128 of size 128 The buggy address is located 112 bytes inside of 128-byte region [ffff88800f43f500, ffff88800f43f580) The buggy address belongs to the page: page:ffffea00003d0f00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xf43c head:ffffea00003d0f00 order:2 compound_mapcount:0 compound_pincount:0 flags: 0x1fffff80010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff) raw: 001fffff80010200 ffffea000046ba08 ffffea0000457208 ffff88810004d1c0 raw: 0000000000000000 0000000000190019 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88800f43f400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88800f43f480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc > ffff88800f43f500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc ^ ffff88800f43f580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88800f43f600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc The following steps can used to reproduce: Process 1: write and trigger ubi wear-leveling ubimkvol /dev/ubi0 -s 5000MiB -N v1 ubimkvol /dev/ubi0 -s 2000MiB -N v2 ubimkvol /dev/ubi0 -s 10MiB -N v3 mount -t ubifs /dev/ubi0_0 /mnt/ubifs while true; do filename=/mnt/ubifs/$((RANDOM)) dd if=/dev/random of=${filename} bs=1M count=$((RANDOM % 1000)) rm -rf ${filename} sync /mnt/ubifs/ done Process 2: do random resize struct ubi_rsvol_req req; req.vol_id = 1; req.bytes = (rand() % 50) * 512KB; ioctl(fd, UBI_IOCRSVOL, &req); V3: - Fix the commit message error. V2: - Add volumes_lock in ubi_eba_copy_leb() to avoid race caused by updating eba_tbl. V1: - Rebase the patch on the latest mainline. Signed-off-by:Guo Xuenan <guoxuenan@huawei.com> Signed-off-by:
-
Zhang Yi authored
Now that the calculation of fastmap size in ubi_calc_fm_size() is incorrect since it miss each user volume's ubi_fm_eba structure and the Internal UBI volume info. Let's correct the calculation. Cc: stable@vger.kernel.org Signed-off-by:
-
Kunwu Chan authored
Because there is no break statement in the dead loop above,it is impossible to execute the 'err=0' statement.Delete the code that will never execute. Fixes: 6fb324a4 ("UBIFS: allocate ltab checking buffer on demand") Signed-off-by:
Kunwu Chan <chentao@kylinos.cn> Cc: Kunwu Chan <kunwu.chan@hotmail.com> Suggested-by:
Richard Weinberger <richard.weinberger@gmail.com> Reviewed-by:
-
Arnd Bergmann authored
ubifs has a number of callback functions for ubifs_lpt_scan_nolock() using two different prototypes, either passing a struct scan_data or a struct ubifs_lp_stats, but the caller expects a void pointer instead. clang-16 now warns about this: fs/ubifs/find.c:170:9: error: cast from 'int (*)(struct ubifs_info *, const struct ubifs_lprops *, int, struct scan_data *)' to 'ubifs_lpt_scan_callback' (aka 'int (*)(struct ubifs_info *, const struct ubifs_lprops *, int, void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict] 170 | (ubifs_lpt_scan_callback)scan_for_dirty_cb, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ fs/ubifs/find.c:449:9: error: cast from 'int (*)(struct ubifs_info *, const struct ubifs_lprops *, int, struct scan_data *)' to 'ubifs_lpt_scan_callback' (aka 'int (*)(struct ubifs_info *, const struct ubifs_lprops *, int, void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict] 449 | (ubifs_lpt_scan_callback)scan_for_free_cb, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Change all of these callback functions to actually take the void * argument that is passed by their caller. Signed-off-by:Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
Arnd Bergmann authored
The global sort() function expects a callback pointer to a function with two void* arguments, but ubifs has a function with specific object types, which causes a warning in clang-16 and higher: fs/ubifs/lprops.c:1272:9: error: cast from 'int (*)(struct ubifs_info *, const struct ubifs_lprops *, int, struct ubifs_lp_stats *)' to 'ubifs_lpt_scan_callback' (aka 'int (*)(struct ubifs_info *, const struct ubifs_lprops *, int, void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict] 1272 | (ubifs_lpt_scan_callback)scan_check_cb, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Change the prototype to the regular one and cast the object pointers locally instead. Fixes: 1e51764a ("UBIFS: add new flash file system") Signed-off-by: -
Richard Weinberger authored
If the LEB size is smaller than a volume table record we cannot have volumes. In this case abort attaching. Cc: Chenyuan Yang <cy54@illinois.edu> Cc: stable@vger.kernel.org Fixes: 801c135c ("UBI: Unsorted Block Images") Reported-by:
Chenyuan Yang <cy54@illinois.edu> Closes: https://lore.kernel.org/linux-mtd/1433EB7A-FC89-47D6-8F47-23BE41B263B3@illinois.edu/Signed-off-by:
-
Richard Weinberger authored
Recognizing Zhihao Cheng's valuable contributions, let's officially appoint him as a UBI/UBIFS reviewer. His demonstrated expertise and assistance make him a valuable addition to the MTD community. Cc: Zhihao Cheng <chengzhihao1@huawei.com> Acked-by:
-
Matthew Wilcox (Oracle) authored
Both callers now have a folio, so pass it in. This function contains several assumptions that folios are not large. Signed-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by:
-
Matthew Wilcox (Oracle) authored
When looking in the page cache, retrieve a folio instead of a page. This would need some work to make it safe for large folios. Signed-off-by:
-
Matthew Wilcox (Oracle) authored
This saves a single call to compound_head(). Signed-off-by:
-
Matthew Wilcox (Oracle) authored
The one caller already has a folio, so pass it in instead of the page. Signed-off-by:
-
Matthew Wilcox (Oracle) authored
The one caller has a folio, so pass it in instead of the page. Signed-off-by:
-
Matthew Wilcox (Oracle) authored
All the callers now have a folio, so pass it in, and convert do_readpage() to us folios directly. Includes unifying the exit paths from this function and using kmap_local instead of plain kmap. This function should now work with large folios, but this is not tested. Signed-off-by:
-
Matthew Wilcox (Oracle) authored
Convert the incoming page pointer to a folio and use it throughout, saving several calls to compound_head(). Also remove some PAGE_SIZE assumptions. Signed-off-by:
-
Matthew Wilcox (Oracle) authored
Save eight calls to compound_head() by using the new folio API. Remove a few assumptions that would break with large folios. Signed-off-by:
-
Matthew Wilcox (Oracle) authored
Update to new APIs, removing several calls to compound_head() and including support for large folios. Signed-off-by:
-
Matthew Wilcox (Oracle) authored
Replace six implicit calls to compound_head() with one. Signed-off-by:
-
Matthew Wilcox (Oracle) authored
Replace the call to SetPageError() with a call to mapping_set_error(). Support large folios by using kmap_local_folio() and remapping each time we cross a page boundary. Saves a lot of hidden calls to compound_head(). Signed-off-by:
-
Matthew Wilcox (Oracle) authored
Convert from the old page APIs to the new folio APIs which saves a few hidden calls to compound_head(). Signed-off-by:
-
Matthew Wilcox (Oracle) authored
We still pass the page down to do_writepage(), but ubifs_writepage() itself is now large folio safe. It also contains far fewer hidden calls to compound_head(). Signed-off-by:
-
Matthew Wilcox (Oracle) authored
This is a simplistic conversion to separate out any effects of no longer having a writepage method. Signed-off-by:
-
Matthew Wilcox (Oracle) authored
Page cache reads are lockless, so setting the freshly allocated page uptodate before we've overwritten it with the data it's supposed to have in it will allow a simultaneous reader to see old data. Move the call to SetPageUptodate into ubifs_write_end(), which is after we copied the new data into the page. Fixes: 1e51764a ("UBIFS: add new flash file system") Cc: stable@vger.kernel.org Signed-off-by:
-
- 18 Feb, 2024 6 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Reformat nested if-conditionals in Makefiles with 4 spaces - Fix CONFIG_DEBUG_INFO_BTF builds for big endian - Fix modpost for module srcversion - Fix an escape sequence warning in gen_compile_commands.py - Fix kallsyms to ignore ARMv4 thunk symbols * tag 'kbuild-fixes-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kallsyms: ignore ARMv4 thunks along with others modpost: trim leading spaces when processing source files list gen_compile_commands: fix invalid escape sequence warning kbuild: Fix changing ELF file type for output of gen_btf for big endian docs: kconfig: Fix grammar and formatting kbuild: use 4-space indentation when followed by conditionals
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Borislav Petkov: - Use a GB page for identity mapping only when memory of this size is requested so that mapping of reserved regions is prevented which would otherwise lead to system crashes on UV machines * tag 'x86_urgent_for_v6.8_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/ident_map: Use gbpages only where full GB page should be mapped.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Borislav Petkov: - Fix GICv4.1 affinity update - Restore a quirk for ACPI-based GICv4 systems - Handle non-coherent GICv4 redistributors properly - Prevent spurious interrupts on Broadcom devices using GIC v3 architecture - Other minor fixes * tag 'irq_urgent_for_v6.8_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3-its: Fix GICv4.1 VPE affinity update irqchip/gic-v3-its: Restore quirk probing for ACPI-based systems irqchip/gic-v3-its: Handle non-coherent GICv4 redistributors irqchip/qcom-mpm: Fix IS_ERR() vs NULL check in qcom_mpm_init() irqchip/loongson-eiointc: Use correct struct type in eiointc_domain_alloc() irqchip/irq-brcmstb-l2: Add write memory barrier before exit
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Two fixes for i801 and qcom-geni devices. Meanwhile, a fix from Arnd addresses a compilation error encountered during compile test on powerpc" * tag 'i2c-for-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: i801: Fix block process call transactions i2c: pasemi: split driver into two separate modules i2c: qcom-geni: Correct I2C TRE sequence
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "This is a bit of a big batch for rc4, but just due to holiday hangover and because I didn't send any fixes last week due to a late revert request. I think next week should be back to normal. - Fix ftrace bug on boot caused by exit text sections with '-fpatchable-function-entry' - Fix accuracy of stolen time on pseries since the switch to VIRT_CPU_ACCOUNTING_GEN - Fix a crash in the IOMMU code when doing DLPAR remove - Set pt_regs->link on scv entry to fix BPF stack unwinding - Add missing PPC_FEATURE_BOOKE on 64-bit e5500/e6500, which broke gdb - Fix boot on some 6xx platforms with STRICT_KERNEL_RWX enabled - Fix build failures with KASAN enabled and 32KB stack size - Some other minor fixes Thanks to Arnd Bergmann, Benjamin Gray, Christophe Leroy, David Engraf, Gaurav Batra, Jason Gunthorpe, Jiangfeng Xiao, Matthias Schiffer, Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nysal Jan K.A, R Nageswara Sastry, Shivaprasad G Bhat, Shrikanth Hegde, Spoorthy, Srikar Dronamraju, and Venkat Rao Bagalkote" * tag 'powerpc-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/iommu: Fix the missing iommu_group_put() during platform domain attach powerpc/pseries: fix accuracy of stolen time powerpc/ftrace: Ignore ftrace locations in exit text sections powerpc/cputable: Add missing PPC_FEATURE_BOOKE on PPC64 Book-E powerpc/kasan: Limit KASAN thread size increase to 32KB Revert "powerpc/pseries/iommu: Fix iommu initialisation during DLPAR add" powerpc: 85xx: mark local functions static powerpc: udbg_memcons: mark functions static powerpc/kasan: Fix addr error caused by page alignment powerpc/6xx: set High BAT Enable flag on G2_LE cores selftests/powerpc/papr_vpd: Check devfd before get_system_loc_code() powerpc/64: Set task pt_regs->link to the LR value on scv entry powerpc/pseries/iommu: Fix iommu initialisation during DLPAR add powerpc/pseries/papr-sysparm: use u8 arrays for payloads
-
